Construction and Building Materials - December 2021

Published:	December 2021

Articles in this Issue

Author(s)	Title	Page(s)
Dias, Patrick Pereira / Jesuino Kammer, Vanessa / Waldmann, Danièle	Analysis of the geometrical imperfections of a dry-stacked masonry block based on Miscanthus	125282
Romanazzi, A. / Oliveira, D. V. / Silva, R. A.	An analytical bond stress-slip model for a TRM composite compatible with rammed earth	125228
Zhang, Wan-lu / Li, Ding-Qiang / Liao, Yi-Shan / Zhao, Lun-Yang	Application potentials of decomposed granite from Benggang area in South China as fine aggregates in cement-based materials	125109
Kumar, Aneel / Kumar, Rabinder / Das, Vishan / Jhatial, Ashfaque Ahmed / Ali, Tauha Hussain	Assessing the structural efficiency and durability of burnt clay bricks incorporating fly ash and silica fume as additives	125233
Arabzadeh, Ali / Staver, Maxwell D. / Podolsky, Joseph H. / Williams, R. Christopher / Hohmann, Austin D. / Cochran, Eric W.	At the frontline for mitigating the undesired effects of recycled asphalt: An alternative bio oil-based modification approach	125253
Chai, Xin / Shang, Huaishuai / Zhang, Chunwei	Bond behavior between corroded steel bar and concrete under sustained load	125122
Nedunuri, Aparna Sai Surya Sree / Mohammed, Asfand yar / Muhammad, Salman	Carbonation potential of concrete debris fines and its valorisation through mineral carbonation	125162
Liu, Hongfu / Ge, Wenwen / Pan, Qinxue / Hu, Rong / Lv, Songtao / Huang, Tuo	Characteristics and analysis of dynamic strain response on typical asphalt pavement using Fiber Bragg Grating sensing technology	125242
Wang, Qiang / Lu, Qing / Li, Xiaochang / Wang, Zhiming / Lyu, Xianjun	Characterization and comparison of the cement produced using clam wreckage and limestone: Cement clinker, freeze–thaw resistance, and hydration products	125219
Huang, Liang / Xie, Jianhe / Li, Liming / Xu, Baoqin / Huang, Peiyan / Lu, Zhongyu	Compressive behaviour and modelling of CFRP-confined ultra-high performance concrete under cyclic loads	124949
Yang, Laiyun / Li, Xiaolong / Fang, Hai / Liu, Weiqing / Hong, Junqing / Hui, David / Gaff, Milan	Compressive behaviour of wood-filled GFRP square columns with lattice-web reinforcements	125129
Nielsen, Jens H. / Thiele, Kerstin / Schneider, Jens / Meyland, Martin J.	Compressive zone depth of thermally tempered glass	125238
Mourão, R. / Caçoilo, A. / Teixeira-Dias, F. / Lecompte, D. / Stratford, T.	Concrete plates with externally bonded FRP under contact detonations	125073
Fu, Bing / Liu, K. C. / Chen, J. F. / Teng, J. G.	Concrete reinforced with macro fibres recycled from waste GFRP	125063
Li, Zhiping / Gao, Xiaojian / Lu, Dagang	Correlation analysis and statistical assessment of early hydration characteristics and compressive strength for multi-composite cement paste	125260
Aghaee, Kamran / Farzadnia, Nima / Khayat, Kamal H.	Coupled effect of expansive agent and curing on mechanical and shrinkage properties of fiber-reinforced Eco-Crete	125285
Zhang, Chao / Tan, Yiqiu / Zhang, Linzhuo / Li, Guannan / Zhang, Junjie / Wang, Yanzhu	Developing fragility curves for asphalt mixture to assess the uncertainty of the permanent deformation performance	125272
Sajid, Hizb Ullah / Kiran, Ravi / Bajwa, Dilpreet S.	Effect of agro-derived corrosion inhibitors on the properties of Portland cement mortar	125236
Ibrahim, Amr M. / Mohamed, Ashraf R. / El-Khatib, Ahmed M. / Alabsy, Mahmoud T. / Elsalamawy, Mona	Effect of hematite and iron slag as aggregate replacement on thermal, mechanical, and gamma-radiation shielding properties of concrete	125225
Bi, Liping / Long, Guangcheng / Tang, Zhuo / Guo, Minglei / Zeng, Xiaohui / Xie, Youjun	The effect of phase change materials on cement hydrate in steam-cured cement-based materials	125268
Ziari, Mohammad Ali / Hajikarimi, Pouria / Kheirati Kazerooni, Afarin / Nejad, Fereidoon Moghadas / Fini, Elham H.	Effect of polyphosphoric acid on fracture properties of asphalt binder and asphalt mixtures	125240
Gharieb, Mahmoud / Mosleh, Youssef A. / Alwetaishi, Mamdooh / Hussein, Enas E. / Sultan, Mohamed E.	Effect of using heavy aggregates on the high performance concrete used in nuclear facilities	125111
Maierdan, Yierfan / Cui, Qi / Chen, Bing / Aminul Haque, M. / Yiming, Ayizekeranmu	Effect of varying water content and extreme weather conditions on the mechanical performance of sludge bricks solidified/stabilized by hemihydrate phosphogypsum, slag, and cement	125286
Florez, Cristian / Restrepo-Baena, Oscar / Tobón, Jorge I.	Effects of calcination and milling pre-treatments on natural zeolites as a supplementary cementitious material	125220
Choi, Jeong-Il / Nguyễn, Huy Hoàng / Park, Se-Eon / Ranade, Ravi / Lee, Bang Yeon	Effects of fiber hybridization on mechanical properties and autogenous healing of alkali-activated slag-based composites	125280
Nalon, Gustavo Henrique / Ribeiro, José Carlos Lopes / Araújo, Eduardo Nery Duarte de / Pedroti, Leonardo Gonçalves / Franco de Carvalho, José Maria / Santos, Rodrigo Felipe / de Oliveira, Diôgo Silva	Effects of post-fire curing on the mechanical properties of cement composites containing carbon black nanoparticles and multi-walled carbon nanotubes	125118
Qu, Fulin / Li, Wengui / Wang, Kejin / Tam, Vivian W. Y. / Zhang, Shishun	Effects of seawater and undesalted sea sand on the hydration products, mechanical properties and microstructures of cement mortar	125229
Salvi Malacarne, Camila / Rubens Cardoso da Silva, Micael / Danieli, Sarah / Gonçalves Maciel, Vinícius / Kirchheim, Ana Paula	Environmental and technical assessment to support sustainable strategies for limestone calcined clay cement production in Brazil	125261
Nunez, Itzel / Marani, Afshin / Flah, Majdi / Nehdi, Moncef L.	Estimating compressive strength of modern concrete mixtures using computational intelligence: A systematic review	125279
Alfalah, Ahmad / Offenbacker, Daniel / Ali, Ayman / Mehta, Yusuf / Elshaer, Mohamed / DeCarlo, Christopher	Evaluating the impact of fiber type and dosage rate on laboratory performance of Fiber-Reinforced asphalt mixtures	125217
Wang, Shilong / Wang, Yao / Yu, Feng / Yang, Yifang / Huang, Zhilai / Ding, Yuanyuan	Evaluation of in-plane crushing performance of printed randomly polymeric honeycombs filled with foamed concrete	125291
Allahyari, Hamed / Heidarpour, Amin / Shayan, Ahmad	Experimental and analytical studies of bacterial self-healing concrete subjected to alkali-silica-reaction	125149
Huang, Yaoying / Xie, Tong / Xu, Xiaofeng / Ding, Qian	Experimental study of creep Poisson ratio of hydraulic concrete under multi-age loading-unloading conditions	125269
Chen, Jianhang / Hagan, Paul C. / Saydam, Serkan	An experimental study of the specimen geometry effect on the axial performance of cement-based grouts	125167
Eslami, Abolfazl / Akbarimehr, Davood	Failure analysis of clay soil-rubber waste mixture as a sustainable construction material	125274
Liu, Xuhong / Chen, Shanghong / Qi, Ai / Lin, Wei / Wu, Huanqiang	Flexural performance of reinforced beams made with composite ferronickel slag concrete	125251
Li, Xuelian / Zhou, Zihan / Ye, Junhong / Zhang, Xian'an / Wang, Suiyuan / Diab, Aboelkasim	High-temperature creep and low-temperature relaxation of recycled asphalt mixtures: Evaluation and balanced mix design	125222
Liu, Minghao / Zhao, Yading / Yu, Zhenyun / Cao, Zhenggang	Impact of Ni(Ⅱ) and Cd(Ⅱ) on the hydration and microstructure of cement pastes for immobilization: C-A-S-H composition and binding characteristic	125284
Thamboo, Julian / Zahra, Tatheer / Asad, Mohammad / Song, Mengli	Improved design provisions for reinforced concrete block masonry walls under axial compression	125226
Rouzmehr, Fouzieh / Choi, Pangil / Nam, Jeong Hee / Won, Moon	Improvements of quality assurance testing program for subgrade and base layer construction	125157
Jing, Guojian / Xu, Jiankai / Wu, Jiaming / Wang, Shuxian / Lu, Xiaolei / Cheng, Xin / Ye, Zhengmao	Improving the cracking resistance of mortar by reduced graphene oxide	125150
Wang, Junyan / Yu, Xin / Ding, Gongying / Si, Jingjing / Ruan, Wei / Zou, Xiaoyong	Influence of asphalt solvents on the rheological and mechanical properties of cold-mixed epoxy asphalt	125245
Zhang, Shixing / Yue, Jinchao / Wu, Jiahui / Li, Ruixia	Influence of rock asphalt on self-healing behavior of asphalt mastics	124851
Zhang, Naitian / Fan, Guopeng / Lv, Songtao / He, Fangwei / Fan, Xianpeng / Peng, Xinghai / Liu, Tie Jun / Liu, Honglin	The influence of SBS modification on the rheological property of asphalt before and after regeneration	125239
Brzozowski, Piotr / Horszczaruk, Elzbieta	Influence of surface preparation on adhesion of underwater repair concretes under hydrostatic pressure	125153
Yumnam, Mahesh / Gupta, Hina / Ghosh, Debdutta / Jaganathan, Jayaprakash	Inspection of concrete structures externally reinforced with FRP composites using active infrared thermography: A review	125265
Zhang, Ran / Sun, Su / Wang, Lei / Guo, Li / Shi, Qipeng / Jia, Jia / Zhang, Xiaoyu / Yu, Hongbo / Xie, Shangxian	Lignin structure defines the properties of asphalt binder as a modifier	125156
Jiang, Yuchen / Hu, Xiamim / Liu, Ying / Tao, Li	Long-term performance of glulam-lightweight concrete composite beams with screw connections	125227
Kawabata, Yuichiro / Takahashi, Haruka / Watanabe, Sadayuki	The long-term suppression effects of fly ash and slag on the expansion of heat-cured mortar due to delayed ettringite formation	125235
Martins, Maysa Lorena Figueiredo / Soares Junior, Paulo Roberto Ribeiro / Henrique da Silva, Thiago / Maciel, Priscila de Souza / Pinheiro, Ivete Peixoto / Bezerra, Augusto Cesar da Silva	Magnesium industry waste and red mud to eco-friendly ternary binder: Producing more sustainable cementitious materials	125172
Xu, Man / Wille, Kay	Material based dynamic increase factor models for UHP-FRC under compression and tension	125232
Giaretton, Marta / Dizhur, Dmytro / Morris, Hugh	Material characterisation of heavy-weight and lightweight adobe brick walls and in-plane strengthening techniques	125309
Arslan, O. / Messali, F. / Smyrou, E. / Bal, I. E. / Rots, J. G.	Mechanical modelling of the axial behaviour of traditional masonry wall metal tie connections in cavity walls	125205
Xu, Junjie / Hao, Xiaolong / Tang, Wei / Zhou, Haiyang / Chen, Lei / Guo, Chuigen / Wang, Qingwen / Ou, Rongxian	Mechanical properties, morphology, and creep resistance of ultra-highly filled bamboo fiber/polypropylene composites: Effects of filler content and melt flow index of polypropylene	125289
Xia, Yang / Wu, Wenan / Yang, Yongtao / Fu, Xiaodong	Mesoscopic study of concrete with random aggregate model using phase field method	125199
Abdulkadir, Isyaka / Mohammed, Bashar S. / Liew, M. S. / Wahab, M. M. A.	Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology	125259
Issa, Issa M. / Zollinger, Dan G.	Modelling compactibility of RCC specimens using the asphalt gyratory compactor	125271
Verdum, Graciela / Bersch, Jéssica Deise / Guerra, Fernanda Lamego / Socoloski, Rafaela Falcão / Giordani, Caroline / Zucchetti, Lais / Masuero, Angela Borges	Mortar coating degradation in historical buildings facades from Rio Grande do Sul – Brazil	125221
Li, Ying / Guan, Hailong / Bao, Yunfeng / Guo, Siyao / Lei, Dongyi / Zhao, Tiejun / Zhong, Baomin / Li, Zhihong	Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite modified epoxy resin coating for improved microwave absorption and impermeability on cement mortar	125213
Tang, Zixuan / Litina, Chrysoula / Al-Tabbaa, Abir	Optimisation of rheological parameters and mechanical properties of Engineered Cementitious Composites (ECC) using regression-based models	125281
Viscione, Nunzio / Lo Presti, Davide / Veropalumbo, Rosa / Oreto, Cristina / Biancardo, Salvatore Antonio / Russo, Francesca	Performance-based characterization of recycled polymer modified asphalt mixture	125243
Luga, Erion / Periku, Erion	A pioneer in-situ investigation on the bearing capacity and failure causes of real scale fully grouted rockbolts	124826
Khater, G. A. / Nabawy, Bassem S. / El-Kheshen, Amany A. / Abdel-Baki, Manal / Farag, M. M. / Elsatar, A. G. Abd	Preparation and characterization of low-cost wollastonite and gehlenite ceramics based on industrial wastes	125214
Zhou, Zhigang / Chen, Gonghong	Preparation, Performance, and modification mechanism of high viscosity modified asphalt	125007
Wang, Chaojie / Guo, Chengchao / Du, Xueming / Shi, Mingsheng / Liu, Qi / Xia, Yangyang	Reinforcement of silty soil with permeable polyurethane by penetration injection	124829
Abedi, Mohammadmahdi / Fangueiro, Raúl / Correia, António Gomes	A review of intrinsic self-sensing cementitious composites and prospects for their application in transport infrastructures	125139
Zhang, Baifa / Feng, Yuan / Xie, Jianhe / Lai, Dongming / Yu, Ting / Huang, Dongchao	Rubberized geopolymer concrete: Dependence of mechanical properties and freeze-thaw resistance on replacement ratio of crumb rubber	125248
Doostkami, Hesam / Roig-Flores, Marta / Serna, Pedro	Self-healing efficiency of Ultra High-Performance Fiber-Reinforced Concrete through permeability to chlorides	125168
Wan, Pei / Wu, Shaopeng / Liu, Quantao / Xu, Haiqin / Wang, Huan / Peng, zhen / Rao, Wenhao / Zou, Yingxue / Zhao, Zenggang / Chen, Shuaichao	Self-healing properties of asphalt concrete containing responsive calcium alginate/nano-Fe3O4 composite capsules via microwave irradiation	125258
Özer, Hakkı / Kuzu, Eslem / Özada, Çağatay / Ünal, Merve / Yazici, Murat	The self-healing sandwich panel: Production of epoxy based self-healing capsules, self-healable sandwich panel development, and experimental measurement of self-healing performance	125303
Kemer, Houssam / Bouras, Rachid / Mesboua, Noureddine / Sonebi, Mohammed / Kinnane, Oliver	Shear-thickening behavior of sustainable cement paste — Controlling physical parameters of new sources of supplementary cementitious materials	125277
Varma, Remya / Balieu, Romain / Kringos, Nicole	A state-of-the-art review on self-healing in asphalt materials: Mechanical testing and analysis approaches	125197
Abdulla, Nwzad Abduljabar	Strength models for uPVC-confined concrete	125070
Zhao, Dongping / Wen, Sixun / Wang, Luwei / Zhang, Baihao / Yang, Liu	Structural parameters and critical anchorage length of tunnel system bolts made of basalt fibre	125081
Gujar, Pratik / Hirshikesh, Hirshikesh / Annabattula, Ratna Kumar / Ghosh, Pijush	Structural to interfacial fracture transition in epoxy coated hydrating cement	125128
Hu, Huachong / Chen, Weixiang / Cai, Xu / Xu, Tao / Cui, Hongzhi / Zhou, Xiaoqing / Chen, Jiayu / Huang, Gongsheng / Sun, Yongjun	Study on preparation and thermal performance improvements of composite phase change material for asphalt steel bridge deck	125255
Ji, Xiaomin / Ji, Daopeng / Yang, Zhouxiang / Wang, Guoling / Huang, Xiaofei / Ma, Suhua / Li, Weifeng	Study on the phase composition and structure of hardened cement paste during heat treatment	125267
Li, Shaojie / Zhang, Yuling / Cheng, Chen / Wei, Han / Du, Shiguo / Yan, Jun	Surface-treated carbon nanotubes in cement composites: Dispersion, mechanical properties and microstructure	125262
Prajapati, Rohit / Gettu, Ravindra / Singh, Surender	Thermomechanical beneficiation of recycled concrete aggregates (RCA)	125200
Rao, Fengrui / Zhang, Zhen / Ye, Guanbao	Three-dimensional mesoscale modeling of foamed cement paste using peridynamics	125230
Van Belleghem, Bjorn / Maes, Mathias / Soetens, Tim	Throwing power and service life of galvanic cathodic protection with embedded discrete anodes for steel reinforcement in chloride contaminated concrete	125187
Qin, Jinyi / Qin, Qingyang / Li, Xiaoguang / Xue, Jiaxin / Wang, Ruiqi / Zhang, Qian / Wang, Panqi / Guo, Zhizhong / Gong, Yifan	Urea supply control in microbial carbonate precipitation to effectively fill pores of concrete	125123
Reboul, N. / Saidi, M. / Gabor, A.	Using acoustic emission to assess the tensile behaviour of textile reinforced cementitious (TRC) matrix composites	125216
Hossain, Sk S. / Roy, P. K. / Bae, Chang-Jun	Utilization of waste rice husk ash for sustainable geopolymer: A review	125218
Assaad, Joseph J. / Vachon, Martin	Valorizing the use of recycled fine aggregates in masonry cement production	125263

About this
data sheet
IssueID
60017
Published on:
30/11/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.