Construction and Building Materials - décembre 2021

Publié:	décembre 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Dias, Patrick Pereira / Jesuino Kammer, Vanessa / Waldmann, Danièle	Analysis of the geometrical imperfections of a dry-stacked masonry block based on Miscanthus	125282
Romanazzi, A. / Oliveira, D. V. / Silva, R. A.	An analytical bond stress-slip model for a TRM composite compatible with rammed earth	125228
Zhang, Wan-lu / Li, Ding-Qiang / Liao, Yi-Shan / Zhao, Lun-Yang	Application potentials of decomposed granite from Benggang area in South China as fine aggregates in cement-based materials	125109
Kumar, Aneel / Kumar, Rabinder / Das, Vishan / Jhatial, Ashfaque Ahmed / Ali, Tauha Hussain	Assessing the structural efficiency and durability of burnt clay bricks incorporating fly ash and silica fume as additives	125233
Arabzadeh, Ali / Staver, Maxwell D. / Podolsky, Joseph H. / Williams, R. Christopher / Hohmann, Austin D. / Cochran, Eric W.	At the frontline for mitigating the undesired effects of recycled asphalt: An alternative bio oil-based modification approach	125253
Chai, Xin / Shang, Huaishuai / Zhang, Chunwei	Bond behavior between corroded steel bar and concrete under sustained load	125122
Nedunuri, Aparna Sai Surya Sree / Mohammed, Asfand yar / Muhammad, Salman	Carbonation potential of concrete debris fines and its valorisation through mineral carbonation	125162
Liu, Hongfu / Ge, Wenwen / Pan, Qinxue / Hu, Rong / Lv, Songtao / Huang, Tuo	Characteristics and analysis of dynamic strain response on typical asphalt pavement using Fiber Bragg Grating sensing technology	125242
Wang, Qiang / Lu, Qing / Li, Xiaochang / Wang, Zhiming / Lyu, Xianjun	Characterization and comparison of the cement produced using clam wreckage and limestone: Cement clinker, freeze–thaw resistance, and hydration products	125219
Huang, Liang / Xie, Jianhe / Li, Liming / Xu, Baoqin / Huang, Peiyan / Lu, Zhongyu	Compressive behaviour and modelling of CFRP-confined ultra-high performance concrete under cyclic loads	124949
Yang, Laiyun / Li, Xiaolong / Fang, Hai / Liu, Weiqing / Hong, Junqing / Hui, David / Gaff, Milan	Compressive behaviour of wood-filled GFRP square columns with lattice-web reinforcements	125129
Nielsen, Jens H. / Thiele, Kerstin / Schneider, Jens / Meyland, Martin J.	Compressive zone depth of thermally tempered glass	125238
Mourão, R. / Caçoilo, A. / Teixeira-Dias, F. / Lecompte, D. / Stratford, T.	Concrete plates with externally bonded FRP under contact detonations	125073
Fu, Bing / Liu, K. C. / Chen, J. F. / Teng, J. G.	Concrete reinforced with macro fibres recycled from waste GFRP	125063
Li, Zhiping / Gao, Xiaojian / Lu, Dagang	Correlation analysis and statistical assessment of early hydration characteristics and compressive strength for multi-composite cement paste	125260
Aghaee, Kamran / Farzadnia, Nima / Khayat, Kamal H.	Coupled effect of expansive agent and curing on mechanical and shrinkage properties of fiber-reinforced Eco-Crete	125285
Zhang, Chao / Tan, Yiqiu / Zhang, Linzhuo / Li, Guannan / Zhang, Junjie / Wang, Yanzhu	Developing fragility curves for asphalt mixture to assess the uncertainty of the permanent deformation performance	125272
Sajid, Hizb Ullah / Kiran, Ravi / Bajwa, Dilpreet S.	Effect of agro-derived corrosion inhibitors on the properties of Portland cement mortar	125236
Ibrahim, Amr M. / Mohamed, Ashraf R. / El-Khatib, Ahmed M. / Alabsy, Mahmoud T. / Elsalamawy, Mona	Effect of hematite and iron slag as aggregate replacement on thermal, mechanical, and gamma-radiation shielding properties of concrete	125225
Bi, Liping / Long, Guangcheng / Tang, Zhuo / Guo, Minglei / Zeng, Xiaohui / Xie, Youjun	The effect of phase change materials on cement hydrate in steam-cured cement-based materials	125268
Ziari, Mohammad Ali / Hajikarimi, Pouria / Kheirati Kazerooni, Afarin / Nejad, Fereidoon Moghadas / Fini, Elham H.	Effect of polyphosphoric acid on fracture properties of asphalt binder and asphalt mixtures	125240
Gharieb, Mahmoud / Mosleh, Youssef A. / Alwetaishi, Mamdooh / Hussein, Enas E. / Sultan, Mohamed E.	Effect of using heavy aggregates on the high performance concrete used in nuclear facilities	125111
Maierdan, Yierfan / Cui, Qi / Chen, Bing / Aminul Haque, M. / Yiming, Ayizekeranmu	Effect of varying water content and extreme weather conditions on the mechanical performance of sludge bricks solidified/stabilized by hemihydrate phosphogypsum, slag, and cement	125286
Florez, Cristian / Restrepo-Baena, Oscar / Tobón, Jorge I.	Effects of calcination and milling pre-treatments on natural zeolites as a supplementary cementitious material	125220
Choi, Jeong-Il / Nguyễn, Huy Hoàng / Park, Se-Eon / Ranade, Ravi / Lee, Bang Yeon	Effects of fiber hybridization on mechanical properties and autogenous healing of alkali-activated slag-based composites	125280
Nalon, Gustavo Henrique / Ribeiro, José Carlos Lopes / Araújo, Eduardo Nery Duarte de / Pedroti, Leonardo Gonçalves / Franco de Carvalho, José Maria / Santos, Rodrigo Felipe / de Oliveira, Diôgo Silva	Effects of post-fire curing on the mechanical properties of cement composites containing carbon black nanoparticles and multi-walled carbon nanotubes	125118
Qu, Fulin / Li, Wengui / Wang, Kejin / Tam, Vivian W. Y. / Zhang, Shishun	Effects of seawater and undesalted sea sand on the hydration products, mechanical properties and microstructures of cement mortar	125229
Salvi Malacarne, Camila / Rubens Cardoso da Silva, Micael / Danieli, Sarah / Gonçalves Maciel, Vinícius / Kirchheim, Ana Paula	Environmental and technical assessment to support sustainable strategies for limestone calcined clay cement production in Brazil	125261
Nunez, Itzel / Marani, Afshin / Flah, Majdi / Nehdi, Moncef L.	Estimating compressive strength of modern concrete mixtures using computational intelligence: A systematic review	125279
Alfalah, Ahmad / Offenbacker, Daniel / Ali, Ayman / Mehta, Yusuf / Elshaer, Mohamed / DeCarlo, Christopher	Evaluating the impact of fiber type and dosage rate on laboratory performance of Fiber-Reinforced asphalt mixtures	125217
Wang, Shilong / Wang, Yao / Yu, Feng / Yang, Yifang / Huang, Zhilai / Ding, Yuanyuan	Evaluation of in-plane crushing performance of printed randomly polymeric honeycombs filled with foamed concrete	125291
Allahyari, Hamed / Heidarpour, Amin / Shayan, Ahmad	Experimental and analytical studies of bacterial self-healing concrete subjected to alkali-silica-reaction	125149
Huang, Yaoying / Xie, Tong / Xu, Xiaofeng / Ding, Qian	Experimental study of creep Poisson ratio of hydraulic concrete under multi-age loading-unloading conditions	125269
Chen, Jianhang / Hagan, Paul C. / Saydam, Serkan	An experimental study of the specimen geometry effect on the axial performance of cement-based grouts	125167
Eslami, Abolfazl / Akbarimehr, Davood	Failure analysis of clay soil-rubber waste mixture as a sustainable construction material	125274
Liu, Xuhong / Chen, Shanghong / Qi, Ai / Lin, Wei / Wu, Huanqiang	Flexural performance of reinforced beams made with composite ferronickel slag concrete	125251
Li, Xuelian / Zhou, Zihan / Ye, Junhong / Zhang, Xian'an / Wang, Suiyuan / Diab, Aboelkasim	High-temperature creep and low-temperature relaxation of recycled asphalt mixtures: Evaluation and balanced mix design	125222
Liu, Minghao / Zhao, Yading / Yu, Zhenyun / Cao, Zhenggang	Impact of Ni(Ⅱ) and Cd(Ⅱ) on the hydration and microstructure of cement pastes for immobilization: C-A-S-H composition and binding characteristic	125284
Thamboo, Julian / Zahra, Tatheer / Asad, Mohammad / Song, Mengli	Improved design provisions for reinforced concrete block masonry walls under axial compression	125226
Rouzmehr, Fouzieh / Choi, Pangil / Nam, Jeong Hee / Won, Moon	Improvements of quality assurance testing program for subgrade and base layer construction	125157
Jing, Guojian / Xu, Jiankai / Wu, Jiaming / Wang, Shuxian / Lu, Xiaolei / Cheng, Xin / Ye, Zhengmao	Improving the cracking resistance of mortar by reduced graphene oxide	125150
Wang, Junyan / Yu, Xin / Ding, Gongying / Si, Jingjing / Ruan, Wei / Zou, Xiaoyong	Influence of asphalt solvents on the rheological and mechanical properties of cold-mixed epoxy asphalt	125245
Zhang, Shixing / Yue, Jinchao / Wu, Jiahui / Li, Ruixia	Influence of rock asphalt on self-healing behavior of asphalt mastics	124851
Zhang, Naitian / Fan, Guopeng / Lv, Songtao / He, Fangwei / Fan, Xianpeng / Peng, Xinghai / Liu, Tie Jun / Liu, Honglin	The influence of SBS modification on the rheological property of asphalt before and after regeneration	125239
Brzozowski, Piotr / Horszczaruk, Elzbieta	Influence of surface preparation on adhesion of underwater repair concretes under hydrostatic pressure	125153
Yumnam, Mahesh / Gupta, Hina / Ghosh, Debdutta / Jaganathan, Jayaprakash	Inspection of concrete structures externally reinforced with FRP composites using active infrared thermography: A review	125265
Zhang, Ran / Sun, Su / Wang, Lei / Guo, Li / Shi, Qipeng / Jia, Jia / Zhang, Xiaoyu / Yu, Hongbo / Xie, Shangxian	Lignin structure defines the properties of asphalt binder as a modifier	125156
Jiang, Yuchen / Hu, Xiamim / Liu, Ying / Tao, Li	Long-term performance of glulam-lightweight concrete composite beams with screw connections	125227
Kawabata, Yuichiro / Takahashi, Haruka / Watanabe, Sadayuki	The long-term suppression effects of fly ash and slag on the expansion of heat-cured mortar due to delayed ettringite formation	125235
Martins, Maysa Lorena Figueiredo / Soares Junior, Paulo Roberto Ribeiro / Henrique da Silva, Thiago / Maciel, Priscila de Souza / Pinheiro, Ivete Peixoto / Bezerra, Augusto Cesar da Silva	Magnesium industry waste and red mud to eco-friendly ternary binder: Producing more sustainable cementitious materials	125172
Xu, Man / Wille, Kay	Material based dynamic increase factor models for UHP-FRC under compression and tension	125232
Giaretton, Marta / Dizhur, Dmytro / Morris, Hugh	Material characterisation of heavy-weight and lightweight adobe brick walls and in-plane strengthening techniques	125309
Arslan, O. / Messali, F. / Smyrou, E. / Bal, I. E. / Rots, J. G.	Mechanical modelling of the axial behaviour of traditional masonry wall metal tie connections in cavity walls	125205
Xu, Junjie / Hao, Xiaolong / Tang, Wei / Zhou, Haiyang / Chen, Lei / Guo, Chuigen / Wang, Qingwen / Ou, Rongxian	Mechanical properties, morphology, and creep resistance of ultra-highly filled bamboo fiber/polypropylene composites: Effects of filler content and melt flow index of polypropylene	125289
Xia, Yang / Wu, Wenan / Yang, Yongtao / Fu, Xiaodong	Mesoscopic study of concrete with random aggregate model using phase field method	125199
Abdulkadir, Isyaka / Mohammed, Bashar S. / Liew, M. S. / Wahab, M. M. A.	Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology	125259
Issa, Issa M. / Zollinger, Dan G.	Modelling compactibility of RCC specimens using the asphalt gyratory compactor	125271
Verdum, Graciela / Bersch, Jéssica Deise / Guerra, Fernanda Lamego / Socoloski, Rafaela Falcão / Giordani, Caroline / Zucchetti, Lais / Masuero, Angela Borges	Mortar coating degradation in historical buildings facades from Rio Grande do Sul – Brazil	125221
Li, Ying / Guan, Hailong / Bao, Yunfeng / Guo, Siyao / Lei, Dongyi / Zhao, Tiejun / Zhong, Baomin / Li, Zhihong	Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite modified epoxy resin coating for improved microwave absorption and impermeability on cement mortar	125213
Tang, Zixuan / Litina, Chrysoula / Al-Tabbaa, Abir	Optimisation of rheological parameters and mechanical properties of Engineered Cementitious Composites (ECC) using regression-based models	125281
Viscione, Nunzio / Lo Presti, Davide / Veropalumbo, Rosa / Oreto, Cristina / Biancardo, Salvatore Antonio / Russo, Francesca	Performance-based characterization of recycled polymer modified asphalt mixture	125243
Luga, Erion / Periku, Erion	A pioneer in-situ investigation on the bearing capacity and failure causes of real scale fully grouted rockbolts	124826
Khater, G. A. / Nabawy, Bassem S. / El-Kheshen, Amany A. / Abdel-Baki, Manal / Farag, M. M. / Elsatar, A. G. Abd	Preparation and characterization of low-cost wollastonite and gehlenite ceramics based on industrial wastes	125214
Zhou, Zhigang / Chen, Gonghong	Preparation, Performance, and modification mechanism of high viscosity modified asphalt	125007
Wang, Chaojie / Guo, Chengchao / Du, Xueming / Shi, Mingsheng / Liu, Qi / Xia, Yangyang	Reinforcement of silty soil with permeable polyurethane by penetration injection	124829
Abedi, Mohammadmahdi / Fangueiro, Raúl / Correia, António Gomes	A review of intrinsic self-sensing cementitious composites and prospects for their application in transport infrastructures	125139
Zhang, Baifa / Feng, Yuan / Xie, Jianhe / Lai, Dongming / Yu, Ting / Huang, Dongchao	Rubberized geopolymer concrete: Dependence of mechanical properties and freeze-thaw resistance on replacement ratio of crumb rubber	125248
Doostkami, Hesam / Roig-Flores, Marta / Serna, Pedro	Self-healing efficiency of Ultra High-Performance Fiber-Reinforced Concrete through permeability to chlorides	125168
Wan, Pei / Wu, Shaopeng / Liu, Quantao / Xu, Haiqin / Wang, Huan / Peng, zhen / Rao, Wenhao / Zou, Yingxue / Zhao, Zenggang / Chen, Shuaichao	Self-healing properties of asphalt concrete containing responsive calcium alginate/nano-Fe3O4 composite capsules via microwave irradiation	125258
Özer, Hakkı / Kuzu, Eslem / Özada, Çağatay / Ünal, Merve / Yazici, Murat	The self-healing sandwich panel: Production of epoxy based self-healing capsules, self-healable sandwich panel development, and experimental measurement of self-healing performance	125303
Kemer, Houssam / Bouras, Rachid / Mesboua, Noureddine / Sonebi, Mohammed / Kinnane, Oliver	Shear-thickening behavior of sustainable cement paste — Controlling physical parameters of new sources of supplementary cementitious materials	125277
Varma, Remya / Balieu, Romain / Kringos, Nicole	A state-of-the-art review on self-healing in asphalt materials: Mechanical testing and analysis approaches	125197
Abdulla, Nwzad Abduljabar	Strength models for uPVC-confined concrete	125070
Zhao, Dongping / Wen, Sixun / Wang, Luwei / Zhang, Baihao / Yang, Liu	Structural parameters and critical anchorage length of tunnel system bolts made of basalt fibre	125081
Gujar, Pratik / Hirshikesh, Hirshikesh / Annabattula, Ratna Kumar / Ghosh, Pijush	Structural to interfacial fracture transition in epoxy coated hydrating cement	125128
Hu, Huachong / Chen, Weixiang / Cai, Xu / Xu, Tao / Cui, Hongzhi / Zhou, Xiaoqing / Chen, Jiayu / Huang, Gongsheng / Sun, Yongjun	Study on preparation and thermal performance improvements of composite phase change material for asphalt steel bridge deck	125255
Ji, Xiaomin / Ji, Daopeng / Yang, Zhouxiang / Wang, Guoling / Huang, Xiaofei / Ma, Suhua / Li, Weifeng	Study on the phase composition and structure of hardened cement paste during heat treatment	125267
Li, Shaojie / Zhang, Yuling / Cheng, Chen / Wei, Han / Du, Shiguo / Yan, Jun	Surface-treated carbon nanotubes in cement composites: Dispersion, mechanical properties and microstructure	125262
Prajapati, Rohit / Gettu, Ravindra / Singh, Surender	Thermomechanical beneficiation of recycled concrete aggregates (RCA)	125200
Rao, Fengrui / Zhang, Zhen / Ye, Guanbao	Three-dimensional mesoscale modeling of foamed cement paste using peridynamics	125230
Van Belleghem, Bjorn / Maes, Mathias / Soetens, Tim	Throwing power and service life of galvanic cathodic protection with embedded discrete anodes for steel reinforcement in chloride contaminated concrete	125187
Qin, Jinyi / Qin, Qingyang / Li, Xiaoguang / Xue, Jiaxin / Wang, Ruiqi / Zhang, Qian / Wang, Panqi / Guo, Zhizhong / Gong, Yifan	Urea supply control in microbial carbonate precipitation to effectively fill pores of concrete	125123
Reboul, N. / Saidi, M. / Gabor, A.	Using acoustic emission to assess the tensile behaviour of textile reinforced cementitious (TRC) matrix composites	125216
Hossain, Sk S. / Roy, P. K. / Bae, Chang-Jun	Utilization of waste rice husk ash for sustainable geopolymer: A review	125218
Assaad, Joseph J. / Vachon, Martin	Valorizing the use of recycled fine aggregates in masonry cement production	125263

Informations
sur cette fiche
IssueID
60017
Publié(e) le:
30.11.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.