Construction and Building Materials - October 2021

Published:	October 2021

Articles in this Issue

Author(s)	Title	Page(s)
Rita Damasceno Costa, Ana / Gonçalves, Jardel Pereira	Accelerated carbonation of ternary cements containing waste materials	124159
Sá Ribeiro, Marilene G. / Sá Ribeiro, Marilia G. / Keane, Patrick F. / Sardela, Mauro R. / Kriven, Waltraud M. / Sá Ribeiro, Ruy A.	Acid resistance of metakaolin-based, bamboo fiber geopolymer composites	124194
Su, Jinfei / Li, Peilong / Ma, Yunfei / Sun, Shengfei / Song, Fakuan	Analysis of migration behavior of aggregate-asphalt system based on interface effect of particles	124187
Huang, Bin / Fang, Changhua / Chen, Lin / Miao, Hu / Ma, Xinxin / Liu, Huanrong / Fei, Benhua	Analysis of the use rate of equal arc-shaped bamboo splits	124273
Aygörmez, Yurdakul	Assessment of performance of metabentonite and metazeolite-based geopolymers with fly ash sand replacement	124423
Kazempour, Shaghayegh / Chenari, Reza Jamshidi / Ahmadi, Hadi / Payan, Meghdad / Senetakis, Kostas	Assessment of the compression characteristics and coefficient of lateral earth pressure of aggregate-expanded polystyrene beads composite fill-backfill using large oedometer experiments	124145
Wright, J. W. / Pantelides, C. P.	Axial compression capacity of concrete columns reinforced with corrosion-resistant hybrid reinforcement	124209
Thapa, Vishojit / Waldmann, Danièle	Binary blended cement pastes and concrete using gravel wash mud (GWM) powders	124225
Wang, Wenjing / Wang, Yang / Li, Dongdong / Liu, Yuanzhen / Li, Zhu	Bond-slip behavior between basalt fiber reinforced plastic bars and recycled aggregate concrete	124360
Kim, Taewan	Characteristics of alkali-activated slag cement-based ultra-lightweight concrete with high-volume cenosphere	124165
Occhipinti, Roberta / Stroscio, Antonio / Belfiore, Cristina Maria / Barone, Germana / Mazzoleni, Paolo	Chemical and colorimetric analysis for the characterization of degradation forms and surface colour modification of building stone materials	124356
Ren, Shisong / Liu, Xueyan / Lin, Peng / Erkens, Sandra / Xiao, Yue	Chemo-physical characterization and molecular dynamics simulation of long-term aging behaviors of bitumen	124437
Li, Lin-jie / Liu, Qing-feng / Tang, Luping / Hu, Zhe / Wen, Yong / Zhang, Peng	Chloride penetration in freeze–thaw induced cracking concrete: A numerical study	124291
Rivera, Carlos / Caro, Silvia / Arámbula-Mercado, Edith / Sánchez, Diana B. / Karki, Pravat	Comparative evaluation of ageing effects on the properties of regular and highly polymer modified asphalt binders	124163
Xing, Zhiyan / Wang, Yuexiang / Zhang, Jin / Ma, Hao	Comparative study on fire resistance and zero strength layer thickness of CLT floor under natural fire and standard fire	124368
Intarasoontron, Jirapa / Pungrasmi, Wiboonluk / Nuaklong, Peem / Jongvivatsakul, Pitcha / Likitlersuang, Suched	Comparing performances of MICP bacterial vegetative cell and microencapsulated bacterial spore methods on concrete crack healing	124227
Wang, Yonggang / Long, Wanpeng	Complete stress–strain curves for pine needle fibre reinforced concrete under compression	124134
Moerman, Ben / Li, Minghao / Cao, Yawei / Lim, Hyungsuk	Compressive behaviour of hardwood dowel reinforced CLT loaded perpendicular-to-Grain	124137
Neumann, C. / Faria, E. F. / Dos Santos, A. C. P.	Concrete leaching of a hydroelectric powerhouse due to 40 years of exposure to river water	124253
Karimi, Mohammad M. / Darabi, Masoud K. / Rushing, John F. / Cox, Benjamin C.	Coupled Thermo-Electromagnetic microstructural modeling of inductive aggregate blends	124107
Li, Shaohua / Long, kun / Zhang, Zhenyu / Yao, Xiaohu	Cracking process and energy dissipation of sandstone under repetitive impact loading with different loading rates: From micro to macro scale	124123
Gong, Mingyang / Zhang, Haitao / Wu, Jian	CZM analysis and evaluation of influencing factors on interlayer adhesion of asphalt mixture with double-layer continuous pave	124211
Milani, Gabriele / Grande, Ernesto / Bertolesi, Elisa / Rotunno, Tommaso / Fagone, Mario	Debonding mechanism of FRP strengthened flat surfaces: Analytical approach and closed form solution	124144
Luis Gómez-Royuela, José / Majano-Majano, Almudena / Lara-Bocanegra, Antonio José / Reynolds, Thomas P. S.	Determination of the elastic constants of thermally modified beech by ultrasound and static tests coupled with 3D digital image correlation	124270
Badouard, Céline / Bogard, Fabien / Bliard, Christophe / Lachi, Mohammed / Abbès, Boussad / Polidori, Guillaume	Development and characterization of viticulture by-products for building applications	124142
Kim, Ji-Hyun / Choi, Ik-Je / Chung, Chul-Woo	Dispersion of single wall carbon nanotube using air entraining agent and its application to portland cement paste	124421
Görtz, J. / Wieprecht, S. / Terheiden, K.	Dual permeability modelling of concrete joints	124090
Ding, Longting / Wang, Xuancang / Zhang, Kaixing / zhang, Mengyuan / Yang, Jia / Chen, Zhao	Durability evaluation of easy compaction and high-durability ultra-thin overlay	124407
Badin, Gul / Ahmad, Naveed / Ali, Hafiz Muhammad / Ahmad, Tufail / Jameel, Muhammad Sohail	Effect of addition of pigments on thermal characteristics and the resulting performance enhancement of asphalt	124212
Bayraktar, Oguzhan Yavuz / Soylemez, Hasan / Kaplan, Gökhan / Benli, Ahmet / Gencel, Osman / Turkoglu, Mesut	Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw	124229
Liu, Yanhui / Dong, Aoran / Zhao, Shichun / Zeng, Yue / Wang, Zhe	The effect of CFRP-shear strengthening on existing circular RC columns under impact loads	124185
Li, Song / Xiong, Rui / Dong, Xiaoming / Sheng, Yanping / Guan, Bowen / Zong, Youjie / Xie, Chao / Zhai, Jiahui / Li, Chuang	Effect of chemical composition of calcined bauxite aggregates on mechanical and physical properties for high friction surface course	124390
Wang, Kun / Guo, Jinjun / Yang, Lin	Effect of dry–wet ratio on sulfate transport-reaction mechanism in concrete	124418
Zhang, Dachuan / Ge, Yong / Pang, Sze Dai / Liu, Penghuan	The effect of fly ash content on flexural performance and fiber failure mechanism of lightweight deflection-hardening cementitious composites	124349
Wei, Yimeng / Chai, Junrui / Qin, Yuan / Li, Yanlong / Xu, Zengguang / Li, Yang / Ma, Yingbiao	Effect of fly ash on mechanical properties and microstructure of cellulose fiber-reinforced concrete under sulfate dry–wet cycle attack	124207
Xu, Jun / Kang, Aihong / Wu, Zhengguang / Xiao, Peng / Gong, Yongfan	Effect of high-calcium basalt fiber on the workability, mechanical properties and microstructure of slag-fly ash geopolymer grouting material	124089
Pan, Yifan / Zhang, Yulu / Zhang, Dakang / Yang, Hongxiong	Effect of polymer and conventional molds on the aesthetical surface quality of concretes	124375
Gómez-Casero, M. A. / Pérez-Villarejo, L. / Castro, E. / Eliche-Quesada, D.	Effect of steel slag and curing temperature on the improvement in technological properties of biomass bottom ash based alkali-activated materials	124205
Cong, Peiliang / Wang, Junyan / Luo, Weihua / Zhang, Yihan	Effects of aging on the properties of SBS modified asphalt binders containing anti-aging agents	124413
Pan, Yunshi / Zhang, Yaowen / Li, Shuangxin	Effects of isothermal microwave curing on steel fibre-reinforced reactive powder concrete: Strength, microstructure and hydration products	124435
Al-Saffar, Zaid Hazim / Yaacob, Haryati / Satar, Mohd Khairul Idham Mohd / Saleem, Mhmood Khleel / Jaya, Ramadhansyah Putra / Basar, Norazah / Radeef, Hassanain Radhi / Hassan, Norhidayah Abdul	Effects of maltene on the attributes of reclaimed asphalt pavement: Performance optimisation	124210
Lv, Xuesen / Qin, Yao / Liang, Hang / Cui, Xuemin	Effects of modifying agent on rheology and workability of alkali-activated slag paste for 3D extrusion forming	124062
Amin, Mohamed / Zeyad, Abdullah M. / Tayeh, Bassam A. / Agwa, Ibrahim Saad	Effects of nano cotton stalk and palm leaf ashes on ultrahigh-performance concrete properties incorporating recycled concrete aggregates	124196
Tang, Yanjie / Schollbach, Katrin / Brouwers, H. J. H. / Chen, Wei	Effects of soluble magnesium on the structure of calcium silicate hydrate	124402
Zhong, Xinzhuo / Li, Lufan / Jiang, Yi / Ling, Tung-Chai	Elucidating the dominant and interaction effects of temperature, CO2 pressure and carbonation time in carbonating steel slag blocks	124158
Liu, Zhuangzhuang / Cao, Yangseng / Sha, Aimin / Wang, Hao / Guo, Lukai / Hao, Yazhen	Energy harvesting array materials with thin piezoelectric plates for traffic data monitoring	124147
Zhang, Ting / Sun, Zhenping / Yang, Haijing / Ji, Yanliang / Yan, Zhuhua	Enhancement of triisopropanolamine on the compressive strength development of cement paste incorporated with high content of wasted clay brick powder and its working mechanism	124052
Chen, Shi-Zhi / Zhang, Shu-Ying / Han, Wan-shui / Wu, Gang	Ensemble learning based approach for FRP-concrete bond strength prediction	124230
Davoodi, Asieh / Aboutalebi Esfahani, Mohsen / Bayat, Meysam / Mohammadyan-Yasouj, Seyed Esmaeil	Evaluation of performance parameters of cement mortar in semi-flexible pavement using rubber powder and nano silica additives	124166
Tang, Wei / Zhan, Baojian / Wu, Cunran / Kou, Shi-Cong	Experimental investigation and mathematical modelling of the carbon dioxide sequestration of cement pastes during pressurized CO2 curing	124383
Pająk, Małgorzata / Baranowski, Paweł / Janiszewski, Jacek / Kucewicz, Michał / Mazurkiewicz, Łukasz / Łaźniewska-Piekarczyk, Beata	Experimental testing and 3D meso-scale numerical simulations of SCC subjected to high compression strain rates	124379
Aiken, Timothy A. / McPolin, Daniel / Russell, Mark / Nanukuttan, Sreejith / Bagnall, Leo	Exposure of magnesium oxide boards to various conditions for extended durations	124429
Li, Jing / Yang, Jing / Liu, Yu / Zhao, Zhenxia / Tang, Xiaoying / Luo, Jingxi / Muhammad, Yaseen	Fabrication of IPDI-LDHs/SBS modified asphalt with enhanced thermal aging and UV aging resistance	124131
Acosta, Andrey Pereira / Delucis, Rafael de Ávila / Amico, Sandro Campos / Gatto, Darci Alberto	Fast-growing pine wood modified by a two-step treatment based on heating and in situ polymerization of polystyrene	124422
Song, Zhengyang / Frühwirt, Thomas / Konietzky, Heinz	Fatigue characteristics of concrete subjected to indirect cyclic tensile loading: Insights from deformation behavior, acoustic emissions and ultrasonic wave propagation	124386
Ma, Yunxiang / Wang, Xiping / Begel, Marshall / Dai, Qingli / Dickinson, Yvette / Xie, Xinfeng / Ross, Robert J.	Flexural and shear performance of CLT panels made from salvaged beetle-killed white spruce	124381
Zheng, Gang / Huang, Jianyou / Diao, Yu / Ma, Aoyang / Su, Yiming / Chen, Hao	Formulation and performance of slow-setting cement-based grouting paste (SCGP) for capsule grouting technology using orthogonal test	124204
Nguyen, Mai Suong T. / Kim, Seung-Eock	A hybrid machine learning approach in prediction and uncertainty quantification of ultimate compressive strength of RCFST columns	124208
Yaghoubi, Ehsan / Yaghoubi, Mohammadjavad / Guerrieri, Maurice / Sudarsanan, Nithin	Improving expansive clay subgrades using recycled glass: Resilient modulus characteristics and pavement performance	124384
Zheng, Yujia / Russell, Mark / Davis, Geoff / McPolin, Daniel / Yang, Kai / Basheer, P. A. M. / Nanukuttan, Sreejith	Influence of carbonation on the bound chloride concentration in different cementitious systems	124171
Chen, Yuanpei / Qin, Wei / Wang, Qing / Tan, Hong	Influence of corrosion pit on the tensile mechanical properties of a multi-layered wire rope strand	124387
Zhang, Yu / Song, Qingqing / Lv, Quan / Wang, Hongxin	Influence of different polyethylene wax additives on the performance of modified asphalt binders and mixtures	124115
Kumar, Dhanendra / Ranade, Ravi	Influence of matrix-modification and fiber-hybridization on high-temperature residual mechanical performance of strain-hardening cementitious composites	124157
He, Yan / Liu, Shuhua / Luo, Qi / Liu, Wenbin / Xu, Mingfeng	Influence of PCE-type GA on cement hydration performances	124432
Shen, Wenkai / Yuan, Qiang / Shi, Caijun / Ji, Youhong / Zeng, Rong / Li, Wei / Chen, Zheng	Influence of pumping on the resistivity evolution of high-strength concrete and its relation to the rheology	124095
Yang, Jian / Chen, Baochun / Nuti, Camillo	Influence of steel fiber on compressive properties of ultra-high performance fiber-reinforced concrete	124104
Yi, Xingyu / Dong, Ruikun / Zhao, Mengzhen / Shi, Chenguang / Yang, Jun	The interaction mechanism and rejuvenation effect of crumb rubber and waste cooking oil blends	124215
Xu, Jing / Yang, Shaobo / Ren, Qiangqiang / Yang, Guiyun	Investigation of granulation calcined under the eutectic temperature in the fluidized bed	124169
Di Lorenzo, Gianmaria / Formisano, Antonio / Terracciano, Giusy / Landolfo, Raffaele	Iron alloys and structural steels from XIX century until today: Evolution of mechanical properties and proposal of a rapid identification method	124132
Sukhija, Mayank / Saboo, Nikhil / Yadav, Akhilesh Kumar / Rath, Chandana	Laboratory study on the suitability of nano-silica as a modifier for asphalt binders	124406
Dias, Patrick Pereira / Jayasinghe, Laddu Bhagya / Waldmann, Danièle	Machine learning in mix design of Miscanthus lightweight concrete	124191
Wang, Xin / Peng, Zheqi / Ding, Lining / Lu, Jing / Zhu, Zhongguo / Wu, Zhishen	Mechanical and bonding behavior of a bendable fiber-reinforced thermoplastic rebar	124222
Guo, Weichao / Wang, Shuai / Xu, Zehua / Zhang, Zhaoyun / Zhang, Chengwei / Bai, Yanying / Zhao, Qingxin	Mechanical performance and microstructure improvement of soda residue–carbide slag–ground granulated blast furnace slag binder by optimizing its preparation process and curing method	124403
Liang, Xiangzhou / Yin, Shiping	Mechanical properties and gas permeability of coral aggregate concrete incorporating supplementary cementitious materials	124237
Thiam, Moussa / Fall, Mamadou	Mechanical, physical and microstructural properties of a mortar with melted plastic waste binder	124190
Chandru, P. / Karthikeyan, J.	Models to predict the mechanical properties of blended SCC containing recycled steel slag and crushed granite stone as coarse aggregate	124342
Sun, Hongfang / Jiang, Ce / Cao, Kun / Yu, Dong / Liu, Wei / Zhang, Xiaogang / Xing, Feng / Zhao, Diandian	Monitoring of steel corrosion and cracking in cement paste exposed to combined sulfate–chloride attack with X-ray microtomography	124345
Gondim, Rafaella Moreira Lima / Haach, Vladimir Guilherme	Monitoring of ultrasonic velocity in concrete specimens during compressive loading-unloading cycles	124218
Zhang, Xuemei / Chen, Hao / Hoff, Inge	The mutual effect and reaction mechanism of bitumen and de-icing salt solution	124213
Lu, Xiaochun / Chen, Bofu / Tian, Bin / Li, Yangbo / Lv, Congcong / Xiong, Bobo	A new method for hydraulic mass concrete temperature control: Design and experiment	124167
Liu, Jun / Liao, Chenyue / Jin, Hesong / Jiang, Zhilu / Zhou, Hao	Numerical and experimental research on the effect of rainfall on the transporting behavior of chloride ions in concrete	124160
Kim, Hyeong-Tae / Kwon, Tae-Hyun / Park, Kyoungsoo	Numerical evaluation of long-term neutron irradiation damage on reinforced concrete (RC) members	124252
Nguyen, Tan-Trac / Thai, Huu-Tai / Ngo, Tuan	Optimised mix design and elastic modulus prediction of ultra-high strength concrete	124150
Sun, Meihui / Pang, Yajie / Du, Cuiwei / Li, Xiaogang / Wu, Yumin	Optimization of Mo on the corrosion resistance of Cr-advanced weathering steel designed for tropical marine atmosphere	124346
Vaasudevaa, B. V. / Dhandapani, Yuvaraj / Santhanam, Manu	Performance evaluation of limestone-calcined clay (LC2) combination as a cement substitute in concrete systems subjected to short-term heat curing	124121
Rath, Punyaslok / Urra Contreras, Loreto / Jahangiri, Behnam / Majidifard, Hamed / Buttlar, William G.	Performance grade of asphalt mixtures based on mixture performance test thresholds	124357
Zhang, Hanghua / Xiao, Jianzhuang	Plastic shrinkage and cracking of 3D printed mortar with recycled sand	124405
Yang, Chen / Lu, Yu / Cao, Liping / Liu, Zhiyang / Zhang, Tiantao / Yu, Hao / Zhang, Bingtao / Dong, Zejiao	Polymer degradation mechanism and chemical composition relationship of hot-poured asphaltic crack repair material during thermal aging exploiting fluorescence microscopy and gel permeation chromatography	124412
Xu, Jiaqiu / Fan, Zepeng / Lin, Jiao / Yang, Xuan / Wang, Dawei / Oeser, Markus	Predicting the low-temperature performance of asphalt binder based on rheological model	124401
Eterigho-Ikelegbe, Orevaoghene / Trammell, Ryan / Bada, Samson	Preparation and characterization of ceramic composites from South Africa coal discard	124164
Yu, Jincheng / Lin, Ludan / Qian, Jueshi / Jia, Xingwen / Wang, Fan	Preparation and properties of a low-cost magnesium phosphate cement with the industrial by-products boron muds	124400
Yang, Xiaolong / Shen, Aiqin / Jiang, Yixin / Meng, Yongjun / Wu, Hansong	Properties and mechanism of flame retardance and smoke suppression in asphalt binder containing organic montmorillonite	124148
Gao, Li / Adesina, Adeyemi / Das, Sreekanta	Properties of eco-friendly basalt fibre reinforced concrete designed by Taguchi method	124161
Cheng, Zhiqiang / Jia, Xiaoyang / Jiang, Haili / Hu, Wei / Huang, Baoshan	Quantification of impact compaction locking point for asphalt mixture	124410
Furat, Orkun / Baldermann, Andre / Baldermann, Claudia / Dietzel, Martin / Schmidt, Volker	Quantitative assessment of microstructural changes of hydrated cement blends due to leaching and carbonation, based on statistical analysis of image data	124370
Ketov, Aleksandr / Rudakova, Larisa / Vaisman, Iakov / Ketov, Iurii / Haritonovs, Viktors / Sahmenko, Genadijs	Recycling of rice husks ash for the preparation of resistant, lightweight and environment-friendly fired bricks	124385
Drissi, Sarra / Shi, Caijun / Li, Ning / Liu, Yiwei / Liu, Jianhui / He, Pingping	Relationship between the composition and hydration-microstructure-mechanical properties of cement-metakaolin-limestone ternary system	124175
Alzeyadi, Ahmed / Yu, Tzuyang	Remote characterization of chloride content in oven-dried concrete specimens by using synthetic aperture radar image models	124317
Wu, Yue / Qiao, Wei-Guo / Liu, Hui-ni / Li, Yan-Zhi / Zhang, Shuai / Xi, Kai / Zhang, Lei	Research on sustainable development of fine-grained material cement slurry	124155
Zhu, Yiming / Pei, Zhongshi / Yi, Junyan / Zhou, Wenyi / Ai, Xinman / Feng, Decheng	Research on the road performance of resin bio-oil mixtures	124162
Chinnu, S. N. / Minnu, S. N. / Bahurudeen, A. / Senthilkumar, R.	Reuse of industrial and agricultural by-products as pozzolan and aggregates in lightweight concrete	124172
Nor Arman, Nur Syafiqaz / Chen, Ruey Shan / Ahmad, Sahrim	Review of state-of-the-art studies on the water absorption capacity of agricultural fiber-reinforced polymer composites for sustainable construction	124174
Chen, Hongbing / Zhou, Meng / Gan, Shiyu / Nie, Xin / Xu, Bin / Mo, Y. L.	Review of wave method-based non-destructive testing for steel-concrete composite structures: Multiscale simulation and multi-physics coupling analysis	123832
Kumar, Aman / Saravanan, T. Jothi / Bisht, Kunal / Kabeer, K. I. Syed Ahmed	A review on the utilization of red mud for the production of geopolymer and alkali activated concrete	124170
Wu, Kai / Han, Hao / Rößler, Christiane / Xu, Linglin / Ludwig, H. M.	Rice hush ash as supplementary cementitious material for calcium aluminate cement – Effects on strength and hydration	124198
Ding, Yining / Li, Dongsheng / Ma, Yue / Liu, Genjin / Song, Shide / Zhang, Daze / Ding, Graciano	Self-localization of the flexural cracks of fiber reinforced concrete beams	124364
Lu, Yujia / Chen, Suwen / Shao, Xiao	Shear modulus of ionomer interlayer: Effects of time, temperature and strain rate	124224
Xu, Xingang / Liu, Hao / Bi, Haifeng / Wang, Shoude / Zhao, Piqi / Huang, Yongbo / Cheng, Xin	Stability and leaching resistance performance of SAC repair and solidification materials exposed to gamma irradiation	124309
Qadir, Adnan / Gazder, Uneb / Choudhary, Karam-un-Nisa	Statistical analysis for comparing and predicting rutting resistance of asphalt pavements with rigid and flexible geogrid layers	124136
Lv, Songtao / Yuan, Jiang / Peng, Xinghai / Zhang, Naitian / Liu, Hongfu / Luo, Xinzi	A structural design for semi-rigid base asphalt pavement based on modulus optimization	124216
Gonzalez-Lopez, L. / Claramunt, J. / Haurie, L. / Ventura, H. / Ardanuy, M.	Study of the fire and thermal behaviour of façade panels made of natural fibre-reinforced cement-based composites	124195
Dong, Peng / Ahmad, Muhammad Riaz / Chen, Bing / Munir, Muhammad Junaid / Kazmi, Syed Minhaj Saleem	A study on magnesium phosphate cement mortars reinforced by polyvinyl alcohol fibers	124154
Zhu, Jianing / Ma, Jinfeng / Guo, Dongdong / Wu, Yaopeng / Ma, Jiangjian	Study on tensile properties of semi grouted sleeve connectors after high temperature	124088
Li, Xuan / Kulandaivelu, Jagadeeshkumar / O'Moore, Liza / Wilkie, Simeon / Hanzic, Lucija / Bond, Philip L. / Yuan, Zhiguo / Jiang, Guangming	Synergistic effect on concrete corrosion control in sewer environment achieved by applying surface washing on calcium nitrite admixed concrete	124184
Yu, Yang / Zhang, Chunmei / Gu, Tao / Xu, Weining / Zhang, Jiaying / Zhang, Gaoyin / Huang, Sheng / Liu, Kaiqiang / Cheng, Xiaowei	Synthesis and evaluation of a new type of oil-well cement temperature-resistant retarder	124153
Rodrigues, D. M. / Leitão, C. / Balakrishnan, M. / Craveiro, H. D. / Santiago, A.	Tensile properties of S355 butt welds after exposure to high temperatures	124374
Liang, Kun / Hou, Yingjie / Sun, Jianchun / Li, Xiaoguang / Bai, Jiahong / Tian, Wei / Liu, Yunxiao	Theoretical analysis of water absorption kinetics of recycled aggregates immersed in water	124156
Torrens-Martín, David / Winnefeld, Frank / Fernández-Carrasco, Lucía J.	Thermodynamic model for ternary OPC/CAC/Calcium Sulfate binders	124120
Ge, Haitao / Quezada, Juan Carlos / Houerou, Vincent Le / Chazallon, Cyrille	Three-dimensional simulation of asphalt mixture incorporating aggregate size and morphology distribution based on contact dynamics method	124124
Shao, Wei / Zhang, Wei / Shi, Danda / Xu, Yingzi / Liu, Erli	Time-varying characteristics of the durability and lateral bearing behaviour of FRP bar-reinforced concrete piles in marine environments	124192
Baǧrıaçık, Baki	Utilization of alkali-activated construction demolition waste for sandy soil improvement with large-scale laboratory experiments	124173
Menchaca-Ballinas, L. E. / Gorokhovsky, A. V. / Escalante-García, J. I.	Waste glass as a precursor in sustainable hydraulic cements activated with CaO-NaOH-Na2CO3	124099
Li, Kai / Xu, Li / Stroeven, Piet / Shi, Caijun	Water permeability of unsaturated cementitious materials: A review	124168

About this
data sheet
IssueID
59465
Published on:
02/09/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.