Construction and Building Materials - octobre 2021

Publié:	octobre 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Rita Damasceno Costa, Ana / Gonçalves, Jardel Pereira	Accelerated carbonation of ternary cements containing waste materials	124159
Sá Ribeiro, Marilene G. / Sá Ribeiro, Marilia G. / Keane, Patrick F. / Sardela, Mauro R. / Kriven, Waltraud M. / Sá Ribeiro, Ruy A.	Acid resistance of metakaolin-based, bamboo fiber geopolymer composites	124194
Su, Jinfei / Li, Peilong / Ma, Yunfei / Sun, Shengfei / Song, Fakuan	Analysis of migration behavior of aggregate-asphalt system based on interface effect of particles	124187
Huang, Bin / Fang, Changhua / Chen, Lin / Miao, Hu / Ma, Xinxin / Liu, Huanrong / Fei, Benhua	Analysis of the use rate of equal arc-shaped bamboo splits	124273
Aygörmez, Yurdakul	Assessment of performance of metabentonite and metazeolite-based geopolymers with fly ash sand replacement	124423
Kazempour, Shaghayegh / Chenari, Reza Jamshidi / Ahmadi, Hadi / Payan, Meghdad / Senetakis, Kostas	Assessment of the compression characteristics and coefficient of lateral earth pressure of aggregate-expanded polystyrene beads composite fill-backfill using large oedometer experiments	124145
Wright, J. W. / Pantelides, C. P.	Axial compression capacity of concrete columns reinforced with corrosion-resistant hybrid reinforcement	124209
Thapa, Vishojit / Waldmann, Danièle	Binary blended cement pastes and concrete using gravel wash mud (GWM) powders	124225
Wang, Wenjing / Wang, Yang / Li, Dongdong / Liu, Yuanzhen / Li, Zhu	Bond-slip behavior between basalt fiber reinforced plastic bars and recycled aggregate concrete	124360
Kim, Taewan	Characteristics of alkali-activated slag cement-based ultra-lightweight concrete with high-volume cenosphere	124165
Occhipinti, Roberta / Stroscio, Antonio / Belfiore, Cristina Maria / Barone, Germana / Mazzoleni, Paolo	Chemical and colorimetric analysis for the characterization of degradation forms and surface colour modification of building stone materials	124356
Ren, Shisong / Liu, Xueyan / Lin, Peng / Erkens, Sandra / Xiao, Yue	Chemo-physical characterization and molecular dynamics simulation of long-term aging behaviors of bitumen	124437
Li, Lin-jie / Liu, Qing-feng / Tang, Luping / Hu, Zhe / Wen, Yong / Zhang, Peng	Chloride penetration in freeze–thaw induced cracking concrete: A numerical study	124291
Rivera, Carlos / Caro, Silvia / Arámbula-Mercado, Edith / Sánchez, Diana B. / Karki, Pravat	Comparative evaluation of ageing effects on the properties of regular and highly polymer modified asphalt binders	124163
Xing, Zhiyan / Wang, Yuexiang / Zhang, Jin / Ma, Hao	Comparative study on fire resistance and zero strength layer thickness of CLT floor under natural fire and standard fire	124368
Intarasoontron, Jirapa / Pungrasmi, Wiboonluk / Nuaklong, Peem / Jongvivatsakul, Pitcha / Likitlersuang, Suched	Comparing performances of MICP bacterial vegetative cell and microencapsulated bacterial spore methods on concrete crack healing	124227
Wang, Yonggang / Long, Wanpeng	Complete stress–strain curves for pine needle fibre reinforced concrete under compression	124134
Moerman, Ben / Li, Minghao / Cao, Yawei / Lim, Hyungsuk	Compressive behaviour of hardwood dowel reinforced CLT loaded perpendicular-to-Grain	124137
Neumann, C. / Faria, E. F. / Dos Santos, A. C. P.	Concrete leaching of a hydroelectric powerhouse due to 40 years of exposure to river water	124253
Karimi, Mohammad M. / Darabi, Masoud K. / Rushing, John F. / Cox, Benjamin C.	Coupled Thermo-Electromagnetic microstructural modeling of inductive aggregate blends	124107
Li, Shaohua / Long, kun / Zhang, Zhenyu / Yao, Xiaohu	Cracking process and energy dissipation of sandstone under repetitive impact loading with different loading rates: From micro to macro scale	124123
Gong, Mingyang / Zhang, Haitao / Wu, Jian	CZM analysis and evaluation of influencing factors on interlayer adhesion of asphalt mixture with double-layer continuous pave	124211
Milani, Gabriele / Grande, Ernesto / Bertolesi, Elisa / Rotunno, Tommaso / Fagone, Mario	Debonding mechanism of FRP strengthened flat surfaces: Analytical approach and closed form solution	124144
Luis Gómez-Royuela, José / Majano-Majano, Almudena / Lara-Bocanegra, Antonio José / Reynolds, Thomas P. S.	Determination of the elastic constants of thermally modified beech by ultrasound and static tests coupled with 3D digital image correlation	124270
Badouard, Céline / Bogard, Fabien / Bliard, Christophe / Lachi, Mohammed / Abbès, Boussad / Polidori, Guillaume	Development and characterization of viticulture by-products for building applications	124142
Kim, Ji-Hyun / Choi, Ik-Je / Chung, Chul-Woo	Dispersion of single wall carbon nanotube using air entraining agent and its application to portland cement paste	124421
Görtz, J. / Wieprecht, S. / Terheiden, K.	Dual permeability modelling of concrete joints	124090
Ding, Longting / Wang, Xuancang / Zhang, Kaixing / zhang, Mengyuan / Yang, Jia / Chen, Zhao	Durability evaluation of easy compaction and high-durability ultra-thin overlay	124407
Badin, Gul / Ahmad, Naveed / Ali, Hafiz Muhammad / Ahmad, Tufail / Jameel, Muhammad Sohail	Effect of addition of pigments on thermal characteristics and the resulting performance enhancement of asphalt	124212
Bayraktar, Oguzhan Yavuz / Soylemez, Hasan / Kaplan, Gökhan / Benli, Ahmet / Gencel, Osman / Turkoglu, Mesut	Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw	124229
Liu, Yanhui / Dong, Aoran / Zhao, Shichun / Zeng, Yue / Wang, Zhe	The effect of CFRP-shear strengthening on existing circular RC columns under impact loads	124185
Li, Song / Xiong, Rui / Dong, Xiaoming / Sheng, Yanping / Guan, Bowen / Zong, Youjie / Xie, Chao / Zhai, Jiahui / Li, Chuang	Effect of chemical composition of calcined bauxite aggregates on mechanical and physical properties for high friction surface course	124390
Wang, Kun / Guo, Jinjun / Yang, Lin	Effect of dry–wet ratio on sulfate transport-reaction mechanism in concrete	124418
Zhang, Dachuan / Ge, Yong / Pang, Sze Dai / Liu, Penghuan	The effect of fly ash content on flexural performance and fiber failure mechanism of lightweight deflection-hardening cementitious composites	124349
Wei, Yimeng / Chai, Junrui / Qin, Yuan / Li, Yanlong / Xu, Zengguang / Li, Yang / Ma, Yingbiao	Effect of fly ash on mechanical properties and microstructure of cellulose fiber-reinforced concrete under sulfate dry–wet cycle attack	124207
Xu, Jun / Kang, Aihong / Wu, Zhengguang / Xiao, Peng / Gong, Yongfan	Effect of high-calcium basalt fiber on the workability, mechanical properties and microstructure of slag-fly ash geopolymer grouting material	124089
Pan, Yifan / Zhang, Yulu / Zhang, Dakang / Yang, Hongxiong	Effect of polymer and conventional molds on the aesthetical surface quality of concretes	124375
Gómez-Casero, M. A. / Pérez-Villarejo, L. / Castro, E. / Eliche-Quesada, D.	Effect of steel slag and curing temperature on the improvement in technological properties of biomass bottom ash based alkali-activated materials	124205
Cong, Peiliang / Wang, Junyan / Luo, Weihua / Zhang, Yihan	Effects of aging on the properties of SBS modified asphalt binders containing anti-aging agents	124413
Pan, Yunshi / Zhang, Yaowen / Li, Shuangxin	Effects of isothermal microwave curing on steel fibre-reinforced reactive powder concrete: Strength, microstructure and hydration products	124435
Al-Saffar, Zaid Hazim / Yaacob, Haryati / Satar, Mohd Khairul Idham Mohd / Saleem, Mhmood Khleel / Jaya, Ramadhansyah Putra / Basar, Norazah / Radeef, Hassanain Radhi / Hassan, Norhidayah Abdul	Effects of maltene on the attributes of reclaimed asphalt pavement: Performance optimisation	124210
Lv, Xuesen / Qin, Yao / Liang, Hang / Cui, Xuemin	Effects of modifying agent on rheology and workability of alkali-activated slag paste for 3D extrusion forming	124062
Amin, Mohamed / Zeyad, Abdullah M. / Tayeh, Bassam A. / Agwa, Ibrahim Saad	Effects of nano cotton stalk and palm leaf ashes on ultrahigh-performance concrete properties incorporating recycled concrete aggregates	124196
Tang, Yanjie / Schollbach, Katrin / Brouwers, H. J. H. / Chen, Wei	Effects of soluble magnesium on the structure of calcium silicate hydrate	124402
Zhong, Xinzhuo / Li, Lufan / Jiang, Yi / Ling, Tung-Chai	Elucidating the dominant and interaction effects of temperature, CO2 pressure and carbonation time in carbonating steel slag blocks	124158
Liu, Zhuangzhuang / Cao, Yangseng / Sha, Aimin / Wang, Hao / Guo, Lukai / Hao, Yazhen	Energy harvesting array materials with thin piezoelectric plates for traffic data monitoring	124147
Zhang, Ting / Sun, Zhenping / Yang, Haijing / Ji, Yanliang / Yan, Zhuhua	Enhancement of triisopropanolamine on the compressive strength development of cement paste incorporated with high content of wasted clay brick powder and its working mechanism	124052
Chen, Shi-Zhi / Zhang, Shu-Ying / Han, Wan-shui / Wu, Gang	Ensemble learning based approach for FRP-concrete bond strength prediction	124230
Davoodi, Asieh / Aboutalebi Esfahani, Mohsen / Bayat, Meysam / Mohammadyan-Yasouj, Seyed Esmaeil	Evaluation of performance parameters of cement mortar in semi-flexible pavement using rubber powder and nano silica additives	124166
Tang, Wei / Zhan, Baojian / Wu, Cunran / Kou, Shi-Cong	Experimental investigation and mathematical modelling of the carbon dioxide sequestration of cement pastes during pressurized CO2 curing	124383
Pająk, Małgorzata / Baranowski, Paweł / Janiszewski, Jacek / Kucewicz, Michał / Mazurkiewicz, Łukasz / Łaźniewska-Piekarczyk, Beata	Experimental testing and 3D meso-scale numerical simulations of SCC subjected to high compression strain rates	124379
Aiken, Timothy A. / McPolin, Daniel / Russell, Mark / Nanukuttan, Sreejith / Bagnall, Leo	Exposure of magnesium oxide boards to various conditions for extended durations	124429
Li, Jing / Yang, Jing / Liu, Yu / Zhao, Zhenxia / Tang, Xiaoying / Luo, Jingxi / Muhammad, Yaseen	Fabrication of IPDI-LDHs/SBS modified asphalt with enhanced thermal aging and UV aging resistance	124131
Acosta, Andrey Pereira / Delucis, Rafael de Ávila / Amico, Sandro Campos / Gatto, Darci Alberto	Fast-growing pine wood modified by a two-step treatment based on heating and in situ polymerization of polystyrene	124422
Song, Zhengyang / Frühwirt, Thomas / Konietzky, Heinz	Fatigue characteristics of concrete subjected to indirect cyclic tensile loading: Insights from deformation behavior, acoustic emissions and ultrasonic wave propagation	124386
Ma, Yunxiang / Wang, Xiping / Begel, Marshall / Dai, Qingli / Dickinson, Yvette / Xie, Xinfeng / Ross, Robert J.	Flexural and shear performance of CLT panels made from salvaged beetle-killed white spruce	124381
Zheng, Gang / Huang, Jianyou / Diao, Yu / Ma, Aoyang / Su, Yiming / Chen, Hao	Formulation and performance of slow-setting cement-based grouting paste (SCGP) for capsule grouting technology using orthogonal test	124204
Nguyen, Mai Suong T. / Kim, Seung-Eock	A hybrid machine learning approach in prediction and uncertainty quantification of ultimate compressive strength of RCFST columns	124208
Yaghoubi, Ehsan / Yaghoubi, Mohammadjavad / Guerrieri, Maurice / Sudarsanan, Nithin	Improving expansive clay subgrades using recycled glass: Resilient modulus characteristics and pavement performance	124384
Zheng, Yujia / Russell, Mark / Davis, Geoff / McPolin, Daniel / Yang, Kai / Basheer, P. A. M. / Nanukuttan, Sreejith	Influence of carbonation on the bound chloride concentration in different cementitious systems	124171
Chen, Yuanpei / Qin, Wei / Wang, Qing / Tan, Hong	Influence of corrosion pit on the tensile mechanical properties of a multi-layered wire rope strand	124387
Zhang, Yu / Song, Qingqing / Lv, Quan / Wang, Hongxin	Influence of different polyethylene wax additives on the performance of modified asphalt binders and mixtures	124115
Kumar, Dhanendra / Ranade, Ravi	Influence of matrix-modification and fiber-hybridization on high-temperature residual mechanical performance of strain-hardening cementitious composites	124157
He, Yan / Liu, Shuhua / Luo, Qi / Liu, Wenbin / Xu, Mingfeng	Influence of PCE-type GA on cement hydration performances	124432
Shen, Wenkai / Yuan, Qiang / Shi, Caijun / Ji, Youhong / Zeng, Rong / Li, Wei / Chen, Zheng	Influence of pumping on the resistivity evolution of high-strength concrete and its relation to the rheology	124095
Yang, Jian / Chen, Baochun / Nuti, Camillo	Influence of steel fiber on compressive properties of ultra-high performance fiber-reinforced concrete	124104
Yi, Xingyu / Dong, Ruikun / Zhao, Mengzhen / Shi, Chenguang / Yang, Jun	The interaction mechanism and rejuvenation effect of crumb rubber and waste cooking oil blends	124215
Xu, Jing / Yang, Shaobo / Ren, Qiangqiang / Yang, Guiyun	Investigation of granulation calcined under the eutectic temperature in the fluidized bed	124169
Di Lorenzo, Gianmaria / Formisano, Antonio / Terracciano, Giusy / Landolfo, Raffaele	Iron alloys and structural steels from XIX century until today: Evolution of mechanical properties and proposal of a rapid identification method	124132
Sukhija, Mayank / Saboo, Nikhil / Yadav, Akhilesh Kumar / Rath, Chandana	Laboratory study on the suitability of nano-silica as a modifier for asphalt binders	124406
Dias, Patrick Pereira / Jayasinghe, Laddu Bhagya / Waldmann, Danièle	Machine learning in mix design of Miscanthus lightweight concrete	124191
Wang, Xin / Peng, Zheqi / Ding, Lining / Lu, Jing / Zhu, Zhongguo / Wu, Zhishen	Mechanical and bonding behavior of a bendable fiber-reinforced thermoplastic rebar	124222
Guo, Weichao / Wang, Shuai / Xu, Zehua / Zhang, Zhaoyun / Zhang, Chengwei / Bai, Yanying / Zhao, Qingxin	Mechanical performance and microstructure improvement of soda residue–carbide slag–ground granulated blast furnace slag binder by optimizing its preparation process and curing method	124403
Liang, Xiangzhou / Yin, Shiping	Mechanical properties and gas permeability of coral aggregate concrete incorporating supplementary cementitious materials	124237
Thiam, Moussa / Fall, Mamadou	Mechanical, physical and microstructural properties of a mortar with melted plastic waste binder	124190
Chandru, P. / Karthikeyan, J.	Models to predict the mechanical properties of blended SCC containing recycled steel slag and crushed granite stone as coarse aggregate	124342
Sun, Hongfang / Jiang, Ce / Cao, Kun / Yu, Dong / Liu, Wei / Zhang, Xiaogang / Xing, Feng / Zhao, Diandian	Monitoring of steel corrosion and cracking in cement paste exposed to combined sulfate–chloride attack with X-ray microtomography	124345
Gondim, Rafaella Moreira Lima / Haach, Vladimir Guilherme	Monitoring of ultrasonic velocity in concrete specimens during compressive loading-unloading cycles	124218
Zhang, Xuemei / Chen, Hao / Hoff, Inge	The mutual effect and reaction mechanism of bitumen and de-icing salt solution	124213
Lu, Xiaochun / Chen, Bofu / Tian, Bin / Li, Yangbo / Lv, Congcong / Xiong, Bobo	A new method for hydraulic mass concrete temperature control: Design and experiment	124167
Liu, Jun / Liao, Chenyue / Jin, Hesong / Jiang, Zhilu / Zhou, Hao	Numerical and experimental research on the effect of rainfall on the transporting behavior of chloride ions in concrete	124160
Kim, Hyeong-Tae / Kwon, Tae-Hyun / Park, Kyoungsoo	Numerical evaluation of long-term neutron irradiation damage on reinforced concrete (RC) members	124252
Nguyen, Tan-Trac / Thai, Huu-Tai / Ngo, Tuan	Optimised mix design and elastic modulus prediction of ultra-high strength concrete	124150
Sun, Meihui / Pang, Yajie / Du, Cuiwei / Li, Xiaogang / Wu, Yumin	Optimization of Mo on the corrosion resistance of Cr-advanced weathering steel designed for tropical marine atmosphere	124346
Vaasudevaa, B. V. / Dhandapani, Yuvaraj / Santhanam, Manu	Performance evaluation of limestone-calcined clay (LC2) combination as a cement substitute in concrete systems subjected to short-term heat curing	124121
Rath, Punyaslok / Urra Contreras, Loreto / Jahangiri, Behnam / Majidifard, Hamed / Buttlar, William G.	Performance grade of asphalt mixtures based on mixture performance test thresholds	124357
Zhang, Hanghua / Xiao, Jianzhuang	Plastic shrinkage and cracking of 3D printed mortar with recycled sand	124405
Yang, Chen / Lu, Yu / Cao, Liping / Liu, Zhiyang / Zhang, Tiantao / Yu, Hao / Zhang, Bingtao / Dong, Zejiao	Polymer degradation mechanism and chemical composition relationship of hot-poured asphaltic crack repair material during thermal aging exploiting fluorescence microscopy and gel permeation chromatography	124412
Xu, Jiaqiu / Fan, Zepeng / Lin, Jiao / Yang, Xuan / Wang, Dawei / Oeser, Markus	Predicting the low-temperature performance of asphalt binder based on rheological model	124401
Eterigho-Ikelegbe, Orevaoghene / Trammell, Ryan / Bada, Samson	Preparation and characterization of ceramic composites from South Africa coal discard	124164
Yu, Jincheng / Lin, Ludan / Qian, Jueshi / Jia, Xingwen / Wang, Fan	Preparation and properties of a low-cost magnesium phosphate cement with the industrial by-products boron muds	124400
Yang, Xiaolong / Shen, Aiqin / Jiang, Yixin / Meng, Yongjun / Wu, Hansong	Properties and mechanism of flame retardance and smoke suppression in asphalt binder containing organic montmorillonite	124148
Gao, Li / Adesina, Adeyemi / Das, Sreekanta	Properties of eco-friendly basalt fibre reinforced concrete designed by Taguchi method	124161
Cheng, Zhiqiang / Jia, Xiaoyang / Jiang, Haili / Hu, Wei / Huang, Baoshan	Quantification of impact compaction locking point for asphalt mixture	124410
Furat, Orkun / Baldermann, Andre / Baldermann, Claudia / Dietzel, Martin / Schmidt, Volker	Quantitative assessment of microstructural changes of hydrated cement blends due to leaching and carbonation, based on statistical analysis of image data	124370
Ketov, Aleksandr / Rudakova, Larisa / Vaisman, Iakov / Ketov, Iurii / Haritonovs, Viktors / Sahmenko, Genadijs	Recycling of rice husks ash for the preparation of resistant, lightweight and environment-friendly fired bricks	124385
Drissi, Sarra / Shi, Caijun / Li, Ning / Liu, Yiwei / Liu, Jianhui / He, Pingping	Relationship between the composition and hydration-microstructure-mechanical properties of cement-metakaolin-limestone ternary system	124175
Alzeyadi, Ahmed / Yu, Tzuyang	Remote characterization of chloride content in oven-dried concrete specimens by using synthetic aperture radar image models	124317
Wu, Yue / Qiao, Wei-Guo / Liu, Hui-ni / Li, Yan-Zhi / Zhang, Shuai / Xi, Kai / Zhang, Lei	Research on sustainable development of fine-grained material cement slurry	124155
Zhu, Yiming / Pei, Zhongshi / Yi, Junyan / Zhou, Wenyi / Ai, Xinman / Feng, Decheng	Research on the road performance of resin bio-oil mixtures	124162
Chinnu, S. N. / Minnu, S. N. / Bahurudeen, A. / Senthilkumar, R.	Reuse of industrial and agricultural by-products as pozzolan and aggregates in lightweight concrete	124172
Nor Arman, Nur Syafiqaz / Chen, Ruey Shan / Ahmad, Sahrim	Review of state-of-the-art studies on the water absorption capacity of agricultural fiber-reinforced polymer composites for sustainable construction	124174
Chen, Hongbing / Zhou, Meng / Gan, Shiyu / Nie, Xin / Xu, Bin / Mo, Y. L.	Review of wave method-based non-destructive testing for steel-concrete composite structures: Multiscale simulation and multi-physics coupling analysis	123832
Kumar, Aman / Saravanan, T. Jothi / Bisht, Kunal / Kabeer, K. I. Syed Ahmed	A review on the utilization of red mud for the production of geopolymer and alkali activated concrete	124170
Wu, Kai / Han, Hao / Rößler, Christiane / Xu, Linglin / Ludwig, H. M.	Rice hush ash as supplementary cementitious material for calcium aluminate cement – Effects on strength and hydration	124198
Ding, Yining / Li, Dongsheng / Ma, Yue / Liu, Genjin / Song, Shide / Zhang, Daze / Ding, Graciano	Self-localization of the flexural cracks of fiber reinforced concrete beams	124364
Lu, Yujia / Chen, Suwen / Shao, Xiao	Shear modulus of ionomer interlayer: Effects of time, temperature and strain rate	124224
Xu, Xingang / Liu, Hao / Bi, Haifeng / Wang, Shoude / Zhao, Piqi / Huang, Yongbo / Cheng, Xin	Stability and leaching resistance performance of SAC repair and solidification materials exposed to gamma irradiation	124309
Qadir, Adnan / Gazder, Uneb / Choudhary, Karam-un-Nisa	Statistical analysis for comparing and predicting rutting resistance of asphalt pavements with rigid and flexible geogrid layers	124136
Lv, Songtao / Yuan, Jiang / Peng, Xinghai / Zhang, Naitian / Liu, Hongfu / Luo, Xinzi	A structural design for semi-rigid base asphalt pavement based on modulus optimization	124216
Gonzalez-Lopez, L. / Claramunt, J. / Haurie, L. / Ventura, H. / Ardanuy, M.	Study of the fire and thermal behaviour of façade panels made of natural fibre-reinforced cement-based composites	124195
Dong, Peng / Ahmad, Muhammad Riaz / Chen, Bing / Munir, Muhammad Junaid / Kazmi, Syed Minhaj Saleem	A study on magnesium phosphate cement mortars reinforced by polyvinyl alcohol fibers	124154
Zhu, Jianing / Ma, Jinfeng / Guo, Dongdong / Wu, Yaopeng / Ma, Jiangjian	Study on tensile properties of semi grouted sleeve connectors after high temperature	124088
Li, Xuan / Kulandaivelu, Jagadeeshkumar / O'Moore, Liza / Wilkie, Simeon / Hanzic, Lucija / Bond, Philip L. / Yuan, Zhiguo / Jiang, Guangming	Synergistic effect on concrete corrosion control in sewer environment achieved by applying surface washing on calcium nitrite admixed concrete	124184
Yu, Yang / Zhang, Chunmei / Gu, Tao / Xu, Weining / Zhang, Jiaying / Zhang, Gaoyin / Huang, Sheng / Liu, Kaiqiang / Cheng, Xiaowei	Synthesis and evaluation of a new type of oil-well cement temperature-resistant retarder	124153
Rodrigues, D. M. / Leitão, C. / Balakrishnan, M. / Craveiro, H. D. / Santiago, A.	Tensile properties of S355 butt welds after exposure to high temperatures	124374
Liang, Kun / Hou, Yingjie / Sun, Jianchun / Li, Xiaoguang / Bai, Jiahong / Tian, Wei / Liu, Yunxiao	Theoretical analysis of water absorption kinetics of recycled aggregates immersed in water	124156
Torrens-Martín, David / Winnefeld, Frank / Fernández-Carrasco, Lucía J.	Thermodynamic model for ternary OPC/CAC/Calcium Sulfate binders	124120
Ge, Haitao / Quezada, Juan Carlos / Houerou, Vincent Le / Chazallon, Cyrille	Three-dimensional simulation of asphalt mixture incorporating aggregate size and morphology distribution based on contact dynamics method	124124
Shao, Wei / Zhang, Wei / Shi, Danda / Xu, Yingzi / Liu, Erli	Time-varying characteristics of the durability and lateral bearing behaviour of FRP bar-reinforced concrete piles in marine environments	124192
Baǧrıaçık, Baki	Utilization of alkali-activated construction demolition waste for sandy soil improvement with large-scale laboratory experiments	124173
Menchaca-Ballinas, L. E. / Gorokhovsky, A. V. / Escalante-García, J. I.	Waste glass as a precursor in sustainable hydraulic cements activated with CaO-NaOH-Na2CO3	124099
Li, Kai / Xu, Li / Stroeven, Piet / Shi, Caijun	Water permeability of unsaturated cementitious materials: A review	124168

Informations
sur cette fiche
IssueID
59465
Publié(e) le:
02.09.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.