Construction and Building Materials - February 2021

Published:	February 2021

Articles in this Issue

Author(s)	Title	Page(s)
Cao, Jinsong / Gowripalan, Nadarajah / Sirivivatnanon, Vute / South, Warren	Accelerated test for assessing the potential risk of alkali-silica reaction in concrete using an autoclave	121871
Nanayakkara, Ominda / Gunasekara, Chamila / Sandanayake, Malindu / Law, David W. / Nguyen, Kate / Xia, Jun / Setunge, Sujeeva	Alkali activated slag concrete incorporating recycled aggregate concrete: Long term performance and sustainability aspect	121512
Busquets-Ferrer, Maria / Czabany, Ivana / Vay, Oliver / Gindl-Altmutter, Wolfgang / Hansmann, Christian	Alkali-extracted tree bark for efficient bio-based thermal insulation	121577
Sun, Lianfang / Zhu, Xingji / Kim, Minjae / Zi, Goangseup	Alkali-silica reaction and strength of concrete with pretreated glass particles as fine aggregates	121809
Huang, Jiandong / Zhang, Jia / Ren, Jiaolong / Chen, Haiwei	Anti-rutting performance of the damping asphalt mixtures (DAMs) made with a high content of asphalt rubber (AR)	121878
Kim, Hansol / Ann, Ki Yong	Applicability of ferrosilicon slag for a cementitious binder in concrete mix	121873
Wang, Yuhong / Zhao, Kecheng / Li, Fangjin / Gao, Qi / Lai, King Wai Chiu	Asphaltenes in asphalt: Direct observation and evaluation of their impacts on asphalt properties	121862
Ben Ftima, M. / Lemery, J.	Asymptotic fracture energy for nonlinear simulation of mass concrete structures	121542
Sun, Yuhui / Yu, Wenji / Wei, Xiaoxin / Ge, Lijun / Guo, Zhiwu / Zhang, Yahui	Bamboo strand-based structural composite lumber: Influence of technological parameters on physico-mechanical properties	121795
Balmori, J. A. / Branco, J. M. / Basterra, L. A.	Behaviour of the adhesive bond between low-grade wood and GFRP reinforcements using epoxy resin	121516
Fořt, Jan / Šál, Jiří / Ševčík, Radek / Doleželová, Magdalena / Keppert, Martin / Jerman, Miloš / Záleská, Martina / Stehel, Vojtěch / Černý, Robert	Biomass fly ash as an alternative to coal fly ash in blended cements: Functional aspects	121544
Chailleux, Emmanuel / Queffélec, Clémence / Borghol, Ilef / Farcas, Fabienne / Marceau, Sandrine / Bujoli, Bruno	Bitumen fractionation: Contribution of the individual fractions to the mechanical behavior of road binders	121528
Vignesh, V. / Balaji, A. N. / Mohamed Rabi, B. Raja / Rajini, N. / Ayrilmis, N. / Karthikeyan, M. K. V. / Mohammad, Faruq / Ismail, Sikiru Oluwarotimi / Al-Lohedan, Hamad A.	Cellulosic fiber based hybrid composites: A comparative investigation into their structurally influencing mechanical properties	121587
Xu, Fang	Coating of photocatalytic TiO2 and TiO2-K2O×nSiO2 nanocomposite thin films on limestone: Accelerated rainfall erosion tests	121552
Sevim, Umur Korkut / Bilgic, Hasan Huseyin / Cansız, Ömer Faruk / Ozturk, Murat / Atis, Cengiz Duran	Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques	121584
Youness, Dima / Yahia, Ammar / Tagnit-Hamou, Arezki	Coupled rheo-physical effects of blended cementitious materials on wet packing and flow properties of inert suspensions	121588
Wang, Weixing / Li, Lei / Han, Ya	Crack detection in shadowed images on gray level deviations in a moving window and distance deviations between connected components	121885
Li, Dongsheng / Zhou, Junlong / Ou, Jinping	Damage, nondestructive evaluation and rehabilitation of FRP composite-RC structure: A review	121551
Khan, Muhammad Imran / Hartadi Sutanto, Muslich / Napiah, Madzlan Bin / Khan, Kaffayatullah / Rafiq, Waqas	Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology	121504
Geng, Litao / Liu, Yue / Xu, Qian / Han, Fangyan / Yu, Xiaoxia / Qin, Tongsheng	Development of bio-based stabilizers and their effects on the performance of SBS-modified asphalt	121889
Ashouri, Morteza / Wang (David), Yizhuang / Choi, Yeong-Tae / Kim (Richard), Youngsoo	Development of healing model and simplified characterization test procedure for asphalt concrete	121515
Kong, Weikang / Wei, Ya / Wang, Yaqiong / Sha, Aimin	Development of micro and macro fracture properties of cementitious materials exposed to freeze-thaw environment at early ages	121502
Wu, Jun / Liu, Li / Deng, Yongfeng / Zhang, Guoping / Zhou, Annan / Wang, Qiong	Distinguishing the effects of cementation versus density on the mechanical behavior of cement-based stabilized clays	121571
Samarakoon, M. H. / Ranjith, P. G. / Duan, Wen Hui / Chen, Bernard K. / Khandelwal, Manoj	Early age properties of alkali-activated cement and class G cement under different saturation conditions in oil well applications	121543
Zhang, Feng / Bai, Yin / Cai, Yuebo	Early strength and microstructure of Portland cement mixed with calcium bromide at 5 °C	121508
Bhairappanavar, Shruti / Liu, Rui / Shakoor, Abdul	Eco-friendly dredged material-cement bricks	121524
Li, Bin / Jiang, Zhengwu / Zhou, Gan / Chen, Qing	The effect of Ca2+ concentrations on the characteristics of Mg(OH)2-based building materials prepared in situ by electrodeposition	121523
Sandra, Nevy / Kawaai, Keiyu / Ujike, Isao	Effect of copper slag fine aggregate on corrosion processes and behavior in reinforced concrete prism specimen	121909
Xu, Ouming / Li, Mingyue / Han, Sen / Zhu, Yu / Zhang, Jie	Effect of diesel and microwave on the properties of crumb rubber and its modified binders	121580
Xu, Yang / Liu, Ming / Li, Pengpeng / Zhu, Li / Xia, Xiujian / Zhang, Chi / Yu, Yongjin / Guo, Jintang	Effect of dispersant types on the rheological and mechanical properties of oil well cement paste with nanosilica	121576
Cuevas, Karla / Lopez, Mauricio	The effect of expansive agent and cooling rate in the performance of expanded glass lightweight aggregate as an internal curing agent	121505
Gallala, Wissem / Hamdi, Samira / Martínez-Martínez, Javier / Almousa, Nouf / Shkoukani, Ghada / Moneghan, Daniel / Fusi, Nicoletta / Gaied, Mohamed Essghaier / Montacer, Mabrouk / Bourham, Mohamed	Effect of F-Ba and Pb-Zn tailing on the mechanical and radiation shielding properties of cement mortars	121603
Al-Yousuf, Ayad / Pokharel, Tilak / Lee, Jessey / Gad, Emad / Abdouka, Kamiran / Sanjayan, Jay	Effect of fly ash and slag on properties of normal and high strength concrete including fracture energy by wedge splitting test: Experimental and numerical investigations	121553
Zhang, Chuntao / Zhu, Hongjie / Zhu, Li	Effect of interaction between corrosion and high temperature on mechanical properties of Q355 structural steel	121605
Li, Ye / Zhang, Dong	Effect of lateral restraint and inclusion of polypropylene and steel fibers on spalling behavior, pore pressure, and thermal stress in ultra-high-performance concrete (UHPC) at elevated temperature	121879
He, Juan / Zheng, Weihao / Bai, Wenbin / Hu, Tingting / He, Junhong / Song, Xuefeng	Effect of reactive MgO on hydration and properties of alkali-activated slag pastes with different activators	121608
Adewumi, Adeshina Adewale / Ariffin, Mohd Azreen Mohd / Yusuf, Moruf Olalekan / Maslehuddin, Mohammed / Ismail, Mohammad	Effect of sodium hydroxide concentration on strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar	121530
Sánchez, Martha L. / Capote, G. / Patiño, Juan P.	Effect of surface treatment of fibers on the accelerated aging of biocomposites	121875
Andrade Neto, José da Silva / Santos, Tiago Assunção / Pinto, Silas de Andrade / Dias, Cleber Marcos Ribeiro / Ribeiro, Daniel Véras	Effect of the combined use of carbon nanotubes (CNT) and metakaolin on the properties of cementitious matrices	121903
Yankelevsky, David Z. / Packer, Jeffrey A.	The effect of the loading system on the modulus of rupture of a rectangular glass plate	121585
Fang, Hongyuan / Yu, Zisen / Wang, Juan / Wang, Fuming / Zhang, Juan / Chen, Jianguo	Effects of crushed stones on the compression properties of polymer grout materials	121517
Cui, Xuhao / Ling, Xing	Effects of differential subgrade settlement on damage distribution and mechanical properties of CRTS II slab track	121821
Wu, Hao-Liang / Jin, Fei / Zhou, An-Nan / Du, Yan-Jun	The engineering properties and reaction mechanism of MgO-activated slag cement-clayey sand-bentonite (MSB) cutoff wall backfills	121890
Alharbi, Yousef R. / Abadel, Aref A. / Salah, Abdulrahman A. / Mayhoub, Ola A. / Kohail, Mohamed	Engineering properties of alkali activated materials reactive powder concrete	121550
Kanavaris, Fragkoulis / Jędrzejewska, Agnieszka / Sfikas, Ioannis P. / Schlicke, Dirk / Kuperman, Selmo / Šmilauer, Vít / Honorio, Tulio / Fairbairn, Eduardo M. R. / Valentim, Gabriella / Funchal de Faria, Etore / Azenha, Miguel	Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendations	121570
Tran, Tuan Kiet / Tran, Ngoc Thanh / Kim, Dong joo	Enhancing impact resistance of hybrid ultra-high-performance fiber-reinforced concretes through strategic use of polyamide fibers	121562
Martin, Kimberly / Khodadadi Tirkolaei, Hamed / Kavazanjian, Edward	Enhancing the strength of granular material with a modified enzyme-induced carbonate precipitation (EICP) treatment solution	121529
Liu, Jun / Liu, Jenny / Saboundjian, Steve	Evaluation of cracking susceptibility of Alaskan polymer modified asphalt binders using chemical and rheological indices	121897
Souza, Nathaly Santana Leal de / Anjos, Marcos Alyssandro Soares dos / Sá, Maria das Vitórias Vieira Almeida de / Farias, Evilane Cássia de / Souza, Maelson Mendonça de / Branco, Fernando G. / Pereira, Andreia	Evaluation of sugarcane bagasse ash for lightweight aggregates production	121604
Zheng, Zihan / Du, Yansheng / Chen, Zhihua / Li, Shuangying / Niu, Jiaqi	Experimental and theoretical studies of FRP-Steel composite plate under static tensile loading	121501
D'Anna, Jennifer / Amato, Giuseppina / Chen, Jian Fei / Minafò, Giovanni / La Mendola, Lidia	Experimental application of digital image correlation for the tensile characterization of basalt FRCM composites	121770
Sadeghi, Neda H. / Oliveira, Daniel V. / Silva, Rui A. / Mendes, Nuno / Correia, Mariana / Azizi-Bondarabadi, Hamed	Experimental characterization of adobe vaults strengthened with a TRM-based compatible composite	121568
Yu, Feng / Bu, Shuangshuang / Li, Dongang / Feng, Chaochao / Fang, Yuan	Experimental investigation and theoretical study on bearing capacity of strong PVC-FRP confined concrete column-weak joint strengthened with core steel tube under axial loading	121880
Afgan, Sher / Bing, Chen	Experimental investigation for the development of superior structural integrated thermocrete via incorporation of novel non-encapsulated paraffin aggregate	121883
Wang, Yongyan / Yu, Zhuoqun / Wang, Hongwei	Experimental investigation on some performance of rubber fiber modified cemented paste backfill	121586
Xiao, Hong / Zhang, Zhihai / Cui, Xuhao / Jin, Feng	Experimental study and discrete element analysis of ballast bed with various sand content	121869
Liu, Yanfeng / Cao, Zhenqi / Wang, Yingying / Wang, Dengjia / Liu, Jiaping	Experimental study of hygro-thermal characteristics of novel cement-cork mortars	121901
Shao, Ke / Du, Yunxing / Zhou, Fen	Feasibility of using treated corn cob aggregates in cement mortars	121575
Pan, Yuanyuan / Han, Dongdong / Yang, Tao / Tang, Dong / Huang, Yuxia / Tang, Ningxing / Zhao, Yongli	Field observations and laboratory evaluations of asphalt pavement maintenance using hot in-place recycling	121864
Autengruber, Maximilian / Lukačević, Markus / Gröstlinger, Christof / Füssl, Josef	Finite-element-based prediction of moisture-induced crack patterns for cross sections of solid wood and glued laminated timber exposed to a realistic climate condition	121775
Scorza, Daniela / Luciano, Raimondo / Mousa, Saeed / Vantadori, Sabrina	Fracture behaviour of hybrid fibre-reinforced roller-compacted concrete used in pavements	121554
Morin-Bernard, Alexandre / Blanchet, Pierre / Dagenais, Christian / Achim, Alexis	Glued-laminated timber from northern hardwoods: Effect of finger-joint profile on lamellae tensile strength	121591
Wang, Xiaoping / Hong, Li / Wu, HaiJian / Liu, HuiLin / Jia, DeMing	Grafting waste rubber powder and its application in asphalt	121881
Modler, Luís Eduardo A. / Mohamad, Gihad / Lübeck, André	Hardening process of polymeric adhesive mortars: Approach by phase angle analysis from oscillatory rheometry	121521
Hu, Jianying / Ma, Tao / Zhu, Yuhao / Huang, Xiaoming / Xu, Jian / Chen, Libiao	High-viscosity modified asphalt mixtures for double-layer porous asphalt pavement: Design optimization and evaluation metrics	121893
Su, Na / Fang, Changhua / Zhou, Hui / Tang, Tong / Zhang, Shuqin / Fei, Benhua	Hydrophobic treatment of bamboo with rosin	121507
Huang, Zujian / Sun, Yimin	Hygrothermal performance comparison study on bamboo and timber construction in Asia-Pacific bamboo areas	121602
Lee, Sangkyu / Kim, Gyuyong / Kim, Hongseop / Son, Minjae / Choe, Gyeongcheol / Kobayashi, Koichi / Nam, Jeongsoo	Impact resistance, flexural and tensile properties of amorphous metallic fiber-reinforced cementitious composites according to fiber length	121872
Liu, Shihui / Du, Kang / Huang, Wei / Wen, Kejun / Amini, Farshad / Li, Lin	Improvement of erosion-resistance of bio-bricks through fiber and multiple MICP treatments	121573
Li, Qishi / Zhang, Henglong / Chen, Zihao	Improvement of short-term aging resistance of styrene-butadiene rubber modified asphalt by Sasobit and epoxidized soybean oil	121870
González-Sánchez, J. F. / Fernández, J. M. / Navarro-Blasco, Í. / Alvarez, J. I.	Improving lime-based rendering mortars with admixtures	121887
Sajid, Hizb Ullah / Naik, Dayakar L. / Kiran, Ravi	Improving the ice-melting capacity of traditional deicers	121527
Pereira, João M. / Correia, António A. / Lourenço, Paulo B.	In-plane behaviour of rubble stone masonry walls: Experimental, numerical and analytical approach	121548
Dong, Sufen / Wang, Xinyue / Xu, Huining / Wang, Jialiang / Han, Baoguo	Incorporating super-fine stainless wires to control thermal cracking of concrete structures caused by heat of hydration	121896
Haghshenas, Hamzeh F. / Fini, Elham / Rea, Robert / Khodaii, Ali	Increasing the efficacy of recycling agents with simultaneous addition of zinc diethyldithiocarbamate as an antioxidant	121892
Pasupathy, Kirubajiny / Ramakrishnan, Sayanthan / Sanjayan, Jay	Influence of recycled concrete aggregate on the foam stability of aerated geopolymer concrete	121850
Noor-E-Khuda, Sarkar	Influence of wetting–drying cycles on compressive and flexural strength of cement mortar and CFRP-mortar bond strength	121513
Antunes, V. / Freire, A. C. / Neves, J.	Investigating aged binder mobilization and performance of RAP mixtures for surface courses	121511
Li, Ning / Zhan, He / Yu, Xin / Tang, Wei / Xue, Qinglei	Investigation of the aging behavior of cellulose fiber in reclaimed asphalt pavement	121559
Kasyap, Sathwik S. / Li, Siyue / Senetakis, Kostas	Investigation of the mechanical properties and the influence of micro-structural characteristics of aggregates using micro-indentation and Weibull analysis	121509
Salazar-Cruz, B. A. / Zapien-Castillo, S. / Hernández-Zamora, G. / Rivera-Armenta, J. L.	Investigation of the performance of asphalt binder modified by sargassum	121876
Huang, Qibo / Qian, Zhendong / Yang, Yuming / Zheng, Dong	Investigation of warm mix epoxy asphalt compaction with gyratory compactor and charge coupled photoelectric imaging	121506
Onayev, Anuarbek / Swei, Omar	IRI deterioration model for asphalt concrete pavements: capturing performance improvements over time	121768
Cao, Zhilong / Huang, Xiaoqiao / Yu, Jianying / Han, Xiaobin / Wang, Ruiyang / Li, Ying	Laboratory evaluation of the effect of rejuvenators on the interface performance of rejuvenated SBS modified bitumen mixture by surface free energy method	121866
Moreno-Juez, J. / Vegas, Iñigo J. / Frías Rojas, M. / de la Villa, R. Vigil / Guede-Vázquez, E.	Laboratory-scale study and semi-industrial validation of viability of inorganic CDW fine fractions as SCMs in blended cements	121823
Xiu, Zhanguo / Wang, Shuhong / Ji, Yingchun / Wang, Feili / Ren, Fengyu / Nguyen, Van-Tuan	Loading rate effect on the uniaxial compressive strength (UCS) behavior of cemented paste backfill (CPB)	121526
He, Yan / Zhang, Qinli / Chen, Qiusong / Bian, Jiwei / Qi, Chongchong / Kang, Qian / Feng, Yan	Mechanical and environmental characteristics of cemented paste backfill containing lithium slag-blended binder	121567
Mohit, Mehdi / Ranjbar, Ali / Sharifi, Yasser	Mechanical and microstructural properties of mortars incorporating ceramic waste powder exposed to the hydrochloric acid solution	121565
Trochoutsou, Niki / Di Benedetti, Matteo / Pilakoutas, Kypros / Guadagnini, Maurizio	Mechanical Characterisation of Flax and Jute Textile-Reinforced Mortars	121564
Sciomenta, Martina / Spera, Luca / Bedon, Chiara / Rinaldi, Vincenzo / Fragiacomo, Massimo / Romagnoli, Manuela	Mechanical characterization of novel Homogeneous Beech and hybrid Beech-Corsican Pine thin Cross-Laminated timber panels	121589
Zhou, Ke / Li, Haitao / Hong, Chaokun / Ashraf, Mahmud / Sayed, Usama / Lorenzo, Rodolfo / Corbi, Ileana / Corbi, Ottavia / Yang, Dong / Zuo, Yingfeng	Mechanical properties of large-scale parallel bamboo strand lumber under local compression	121572
Wang, Yumei / Deng, Zhiheng / Xiao, Jianzhuang / Li, Tan / Li, Jun	Mechanical properties of recycled aggregate concrete under compression-shear stress state	121894
Hou, Guihua / Yan, Ziwei / Sun, Jinfeng / Naguib, Hamdy M. / Lu, Bao / Zhang, Zuhua	Microstructure and mechanical properties of CO2-cured steel slag brick in pilot-scale	121581
Pollmann, Nele / Larsson, Fredrik / Runesson, Kenneth / Lundgren, Karin / Zandi, Kamyab / Jänicke, Ralf	Modeling and computational homogenization of chloride diffusion in three-phase meso-scale concrete	121558
Li, Xiang-Nan / Zuo, Xiao-Bao / Zou, Yu-Xiao	Modeling and simulation on coupled chloride and calcium diffusion in concrete	121557
Schneid, Eduardo / Dias de Moraes, Poliana	Modification factors of the embedding strength dependent on the temperature and load-to-grain angle for two wood species planted in Brazil	121503
Uppalapati, Siva / Vandewalle, Lucie / Cizer, Özlem	Monitoring the setting process of alkali-activated slag-fly ash cements with ultrasonic P-wave velocity	121592
Bilisik, Kadir / Ozdemir, Huseyin	Multiaxis three dimensional (3D) carbon and basalt preforms/cementitious matrix concretes: Experimental study on fiber orientation and placement by panel test	121863
Fan, Zepeng / Lin, Jiao / Chen, Zixuan / Liu, Pengfei / Wang, Dawei / Oeser, Markus	Multiscale understanding of interfacial behavior between bitumen and aggregate: From the aggregate mineralogical genome aspect	121607
Lv, Songtao / Wang, Peng / Fan, Xiyan / Borges Cabrera, Milkos / Hu, Long / Peng, Xinghai / Liu, Chaochao / Yuan, Jiang	Normalized comparative study on fatigue characteristics of different pavement materials	121907
Lin, Peng / Liu, Xueyan / Apostolidis, Panos / Erkens, Sandra / Ren, Shisong / Xu, Shi / Scarpas, Tom / Huang, Weidong	On the rejuvenator dosage optimization for aged SBS modified bitumen	121913
Cao, Qi / Lv, Xianrui / Wang, Yanlei / Wu, Zhimin / Lin, Zhibin	Performance and analysis of unidirectional GFRP actively confined high-strength concrete under monotonic and cyclic axial compression	121593
Ling, Jianming / Li, Xiang / Qian, Jinsong / Li, Xueyin	Performance comparison of different electrode materials for electro-osmosis treatment on subgrade soil	121590
Cosoli, G. / Mobili, A. / Giulietti, N. / Chiariotti, P. / Pandarese, G. / Tittarelli, F. / Bellezze, T. / Mikanovic, N. / Revel, G. M.	Performance of concretes manufactured with newly developed low-clinker cements exposed to water and chlorides: Characterization by means of electrical impedance measurements	121546
Qi, Huahui / Ma, Baoguo / Tan, Hongbo / Su, Ying / Jin, Zihao / Li, Chunbao / Liu, Xiaohai / Yang, Qi / Luo, Zhongtao	Polycarboxylate superplasticizer modified by phosphate ester in side chain and its basic properties in gypsum plaster	121566
Duong, Nga Thanh / Satomi, Tomoaki / Takahashi, Hiroshi	Potential of corn husk fiber for reinforcing cemented soil with high water content	121848
Ramlee, Nor Azlina / Naveen, Jesuarockiam / Jawaid, Mohammad	Potential of oil palm empty fruit bunch (OPEFB) and sugarcane bagasse fibers for thermal insulation application – A review	121519
Sun, Y. / Wang, K.Q / Lee, Hu Seok	Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio	121532
Sorin, Edouard / Coureau, Jean-Luc / Chaplain, Myriam	Prediction of the ultimate load-carrying capacity of wooden notched beams with and without reinforcements using a splitting model	121518
Li, Jiahao / Li, Xilong / Liang, Sha / Zhang, Yuanshang / Ye, Qiang / Zhang, Li / Pan, Chaoqun / Lv, Ruibin / Li, Qingyi / Xiao, Keke / Yan, Yilei / Chen, Ye / Hu, Jingping / Hou, Huijie / Yang :, Jiakuan	Preparation of water-permeable bricks derived from fly ash by autoclaving	121556
Wróbel, Michał / Woszuk, Agnieszka / Ratajczak, Maria / Franus, Wojciech	Properties of reclaimed asphalt pavement mixture with organic rejuvenator	121514
Esmaeili, Jamshid / Andalibi, Keyvan / Gencel, Osman / Maleki, Farshid Khosravi / Maleki, Vahid Arab	Pull-out and bond-slip performance of steel fibers with various ends shapes embedded in polymer-modified concrete	121531
Mohan, Harish T. / Jayanarayanan, Karingamanna / Mini, K. M.	Recent trends in utilization of plastics waste composites as construction materials	121520
Rivera-Gómez, Carlos / Galán-Marín, Carmen / López-Cabeza, Victoria P. / Diz-Mellado, Eduardo	Sample key features affecting mechanical, acoustic and thermal properties of a natural-stabilised earthen material	121569
Choi, Hyeonseok / Choi, Young Cheol	Setting characteristics of natural cellulose fiber reinforced cement composite	121910
Zak, Josef	Shear accumulated equilibrium compliance as permanent deforamtion susceptibility parameter	121510
Jing, Guoqing / Siahkouhi, Mohammad / Edwards, J. Riley / Dersch, Marcus S. / Hoult, N. A.	Smart railway sleepers - a review of recent developments, challenges, and future prospects	121533
Tian, Zhongnan / Zhang, Zhengqi / Zhang, Kaiwen / Tang, Xiuming / Huang, Shuolei	Statistical modeling and multi-objective optimization of road geopolymer grouting material via RSM and MOPSO	121534
Miranda, Marcela Palhares / Morsch, Inácio Benvegnu / Brisotto, Daiane de S. / Bittencourt, Eduardo / Carvalho, Eliene Pires	Steel-concrete bond behavior: An experimental and numerical study	121918
Şengün, E. / Alam, B. / Shabani, R. / Yaman, I. O.	Strength and fracture properties of roller compacted concrete (RCC) prepared by an in-situ compaction procedure	121563
Baldovino, Jair J. A. / Izzo, Ronaldo L. S. / Rose, Juliana L. / Domingos, Matheus D. I.	Strength, durability, and microstructure of geopolymers based on recycled-glass powder waste and dolomitic lime for soil stabilization	121874
Brown, Justin R. / Li, Minghao	Structural performance of dowelled cross-laminated timber hold-down connections with increased row spacing and end distance	121595
Sadiq Bhat, Faheem / Mir, Mohammad Shafi	A study investigating the influence of nano Al2O3 on the performance of SBS modified asphalt binder	121499
Li, Jun / Ma, Jie / Tong, Youdong / Fei, E. / Zhang, Zhendong	Study on fractal characteristics of pores of NAS reinforced by MICP under the control of electric field	121540
Rashidian-Dezfouli, Hassan / Rangaraju, Prasada Rao	Study on the effect of selected parameters on the alkali-silica reaction of aggregate in ground glass fiber and fly ash-based geopolymer mortars	121549
Qin, Yangxin / Chen, Xiao / Li, Beixing / Guo, Yuguang / Niu, Zidong / Xia, Tianhao / Meng, Weiwei / Zhou, Mingkai	Study on the mechanical properties and microstructure of chitosan reinforced metakaolin-based geopolymer	121522
Li, Tingyu / Liu, Xiaoming / Wei, Ziqi / Zhao, Yu / Yan, Daxiong	Study on the wear-resistant mechanism of concrete based on wear theory	121594
Jiang, Wenjing / Zhou, Gang / Wang, Cunmin / Xue, Yifang / Niu, Chenxi	Synthesis and self-healing properties of composite microcapsule based on sodium alginate/melamine-phenol–formaldehyde resin	121541
Sebastian, Wendel / Webb, Steve	Tests on prototype pretensioned natural stone beams	121555
Rangappa, Sanjay Mavinkere / Parameswaranpillai, Jyotishkumar / Yorseng, Krittirash / Pulikkalparambil, Harikrishnan / Siengchin, Suchart	Toughened bioepoxy blends and composites based on poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) triblock copolymer and sisal fiber fabrics: A new approach	121843
Yu, Rui / Zhou, Fengjiao / Yin, Tianyi / Wang, Zhiyu / Ding, Mengxi / Liu, Zhen / Leng, Yong / Gao, Xu / Shui, Zhonghe	Uncovering the approach to develop ultra-high performance concrete (UHPC) with dense meso-structure based on rheological point of view: Experiments and modeling	121500
El Machi, Aiman / Mabroum, Safaa / Taha, Yassine / Tagnit-Hamou, Arezki / Benzaazoua, Mostafa / Hakkou, Rachid	Use of flint from phosphate mine waste rocks as an alternative aggregates for concrete	121886
Zou, Chao / Long, Guangcheng / Zeng, Xiaohui / Ma, Cong / Xie, Youjun / Sun, Zhenping	Water evolution and hydration kinetics of cement paste under steam-curing condition based on low-field NMR method	121583

About this
data sheet
IssueID
54859
Published on:
09/01/2021
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.