Construction and Building Materials - février 2021

Publié:	février 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Cao, Jinsong / Gowripalan, Nadarajah / Sirivivatnanon, Vute / South, Warren	Accelerated test for assessing the potential risk of alkali-silica reaction in concrete using an autoclave	121871
Nanayakkara, Ominda / Gunasekara, Chamila / Sandanayake, Malindu / Law, David W. / Nguyen, Kate / Xia, Jun / Setunge, Sujeeva	Alkali activated slag concrete incorporating recycled aggregate concrete: Long term performance and sustainability aspect	121512
Busquets-Ferrer, Maria / Czabany, Ivana / Vay, Oliver / Gindl-Altmutter, Wolfgang / Hansmann, Christian	Alkali-extracted tree bark for efficient bio-based thermal insulation	121577
Sun, Lianfang / Zhu, Xingji / Kim, Minjae / Zi, Goangseup	Alkali-silica reaction and strength of concrete with pretreated glass particles as fine aggregates	121809
Huang, Jiandong / Zhang, Jia / Ren, Jiaolong / Chen, Haiwei	Anti-rutting performance of the damping asphalt mixtures (DAMs) made with a high content of asphalt rubber (AR)	121878
Kim, Hansol / Ann, Ki Yong	Applicability of ferrosilicon slag for a cementitious binder in concrete mix	121873
Wang, Yuhong / Zhao, Kecheng / Li, Fangjin / Gao, Qi / Lai, King Wai Chiu	Asphaltenes in asphalt: Direct observation and evaluation of their impacts on asphalt properties	121862
Ben Ftima, M. / Lemery, J.	Asymptotic fracture energy for nonlinear simulation of mass concrete structures	121542
Sun, Yuhui / Yu, Wenji / Wei, Xiaoxin / Ge, Lijun / Guo, Zhiwu / Zhang, Yahui	Bamboo strand-based structural composite lumber: Influence of technological parameters on physico-mechanical properties	121795
Balmori, J. A. / Branco, J. M. / Basterra, L. A.	Behaviour of the adhesive bond between low-grade wood and GFRP reinforcements using epoxy resin	121516
Fořt, Jan / Šál, Jiří / Ševčík, Radek / Doleželová, Magdalena / Keppert, Martin / Jerman, Miloš / Záleská, Martina / Stehel, Vojtěch / Černý, Robert	Biomass fly ash as an alternative to coal fly ash in blended cements: Functional aspects	121544
Chailleux, Emmanuel / Queffélec, Clémence / Borghol, Ilef / Farcas, Fabienne / Marceau, Sandrine / Bujoli, Bruno	Bitumen fractionation: Contribution of the individual fractions to the mechanical behavior of road binders	121528
Vignesh, V. / Balaji, A. N. / Mohamed Rabi, B. Raja / Rajini, N. / Ayrilmis, N. / Karthikeyan, M. K. V. / Mohammad, Faruq / Ismail, Sikiru Oluwarotimi / Al-Lohedan, Hamad A.	Cellulosic fiber based hybrid composites: A comparative investigation into their structurally influencing mechanical properties	121587
Xu, Fang	Coating of photocatalytic TiO2 and TiO2-K2O×nSiO2 nanocomposite thin films on limestone: Accelerated rainfall erosion tests	121552
Sevim, Umur Korkut / Bilgic, Hasan Huseyin / Cansız, Ömer Faruk / Ozturk, Murat / Atis, Cengiz Duran	Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques	121584
Youness, Dima / Yahia, Ammar / Tagnit-Hamou, Arezki	Coupled rheo-physical effects of blended cementitious materials on wet packing and flow properties of inert suspensions	121588
Wang, Weixing / Li, Lei / Han, Ya	Crack detection in shadowed images on gray level deviations in a moving window and distance deviations between connected components	121885
Li, Dongsheng / Zhou, Junlong / Ou, Jinping	Damage, nondestructive evaluation and rehabilitation of FRP composite-RC structure: A review	121551
Khan, Muhammad Imran / Hartadi Sutanto, Muslich / Napiah, Madzlan Bin / Khan, Kaffayatullah / Rafiq, Waqas	Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology	121504
Geng, Litao / Liu, Yue / Xu, Qian / Han, Fangyan / Yu, Xiaoxia / Qin, Tongsheng	Development of bio-based stabilizers and their effects on the performance of SBS-modified asphalt	121889
Ashouri, Morteza / Wang (David), Yizhuang / Choi, Yeong-Tae / Kim (Richard), Youngsoo	Development of healing model and simplified characterization test procedure for asphalt concrete	121515
Kong, Weikang / Wei, Ya / Wang, Yaqiong / Sha, Aimin	Development of micro and macro fracture properties of cementitious materials exposed to freeze-thaw environment at early ages	121502
Wu, Jun / Liu, Li / Deng, Yongfeng / Zhang, Guoping / Zhou, Annan / Wang, Qiong	Distinguishing the effects of cementation versus density on the mechanical behavior of cement-based stabilized clays	121571
Samarakoon, M. H. / Ranjith, P. G. / Duan, Wen Hui / Chen, Bernard K. / Khandelwal, Manoj	Early age properties of alkali-activated cement and class G cement under different saturation conditions in oil well applications	121543
Zhang, Feng / Bai, Yin / Cai, Yuebo	Early strength and microstructure of Portland cement mixed with calcium bromide at 5 °C	121508
Bhairappanavar, Shruti / Liu, Rui / Shakoor, Abdul	Eco-friendly dredged material-cement bricks	121524
Li, Bin / Jiang, Zhengwu / Zhou, Gan / Chen, Qing	The effect of Ca2+ concentrations on the characteristics of Mg(OH)2-based building materials prepared in situ by electrodeposition	121523
Sandra, Nevy / Kawaai, Keiyu / Ujike, Isao	Effect of copper slag fine aggregate on corrosion processes and behavior in reinforced concrete prism specimen	121909
Xu, Ouming / Li, Mingyue / Han, Sen / Zhu, Yu / Zhang, Jie	Effect of diesel and microwave on the properties of crumb rubber and its modified binders	121580
Xu, Yang / Liu, Ming / Li, Pengpeng / Zhu, Li / Xia, Xiujian / Zhang, Chi / Yu, Yongjin / Guo, Jintang	Effect of dispersant types on the rheological and mechanical properties of oil well cement paste with nanosilica	121576
Cuevas, Karla / Lopez, Mauricio	The effect of expansive agent and cooling rate in the performance of expanded glass lightweight aggregate as an internal curing agent	121505
Gallala, Wissem / Hamdi, Samira / Martínez-Martínez, Javier / Almousa, Nouf / Shkoukani, Ghada / Moneghan, Daniel / Fusi, Nicoletta / Gaied, Mohamed Essghaier / Montacer, Mabrouk / Bourham, Mohamed	Effect of F-Ba and Pb-Zn tailing on the mechanical and radiation shielding properties of cement mortars	121603
Al-Yousuf, Ayad / Pokharel, Tilak / Lee, Jessey / Gad, Emad / Abdouka, Kamiran / Sanjayan, Jay	Effect of fly ash and slag on properties of normal and high strength concrete including fracture energy by wedge splitting test: Experimental and numerical investigations	121553
Zhang, Chuntao / Zhu, Hongjie / Zhu, Li	Effect of interaction between corrosion and high temperature on mechanical properties of Q355 structural steel	121605
Li, Ye / Zhang, Dong	Effect of lateral restraint and inclusion of polypropylene and steel fibers on spalling behavior, pore pressure, and thermal stress in ultra-high-performance concrete (UHPC) at elevated temperature	121879
He, Juan / Zheng, Weihao / Bai, Wenbin / Hu, Tingting / He, Junhong / Song, Xuefeng	Effect of reactive MgO on hydration and properties of alkali-activated slag pastes with different activators	121608
Adewumi, Adeshina Adewale / Ariffin, Mohd Azreen Mohd / Yusuf, Moruf Olalekan / Maslehuddin, Mohammed / Ismail, Mohammad	Effect of sodium hydroxide concentration on strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar	121530
Sánchez, Martha L. / Capote, G. / Patiño, Juan P.	Effect of surface treatment of fibers on the accelerated aging of biocomposites	121875
Andrade Neto, José da Silva / Santos, Tiago Assunção / Pinto, Silas de Andrade / Dias, Cleber Marcos Ribeiro / Ribeiro, Daniel Véras	Effect of the combined use of carbon nanotubes (CNT) and metakaolin on the properties of cementitious matrices	121903
Yankelevsky, David Z. / Packer, Jeffrey A.	The effect of the loading system on the modulus of rupture of a rectangular glass plate	121585
Fang, Hongyuan / Yu, Zisen / Wang, Juan / Wang, Fuming / Zhang, Juan / Chen, Jianguo	Effects of crushed stones on the compression properties of polymer grout materials	121517
Cui, Xuhao / Ling, Xing	Effects of differential subgrade settlement on damage distribution and mechanical properties of CRTS II slab track	121821
Wu, Hao-Liang / Jin, Fei / Zhou, An-Nan / Du, Yan-Jun	The engineering properties and reaction mechanism of MgO-activated slag cement-clayey sand-bentonite (MSB) cutoff wall backfills	121890
Alharbi, Yousef R. / Abadel, Aref A. / Salah, Abdulrahman A. / Mayhoub, Ola A. / Kohail, Mohamed	Engineering properties of alkali activated materials reactive powder concrete	121550
Kanavaris, Fragkoulis / Jędrzejewska, Agnieszka / Sfikas, Ioannis P. / Schlicke, Dirk / Kuperman, Selmo / Šmilauer, Vít / Honorio, Tulio / Fairbairn, Eduardo M. R. / Valentim, Gabriella / Funchal de Faria, Etore / Azenha, Miguel	Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendations	121570
Tran, Tuan Kiet / Tran, Ngoc Thanh / Kim, Dong joo	Enhancing impact resistance of hybrid ultra-high-performance fiber-reinforced concretes through strategic use of polyamide fibers	121562
Martin, Kimberly / Khodadadi Tirkolaei, Hamed / Kavazanjian, Edward	Enhancing the strength of granular material with a modified enzyme-induced carbonate precipitation (EICP) treatment solution	121529
Liu, Jun / Liu, Jenny / Saboundjian, Steve	Evaluation of cracking susceptibility of Alaskan polymer modified asphalt binders using chemical and rheological indices	121897
Souza, Nathaly Santana Leal de / Anjos, Marcos Alyssandro Soares dos / Sá, Maria das Vitórias Vieira Almeida de / Farias, Evilane Cássia de / Souza, Maelson Mendonça de / Branco, Fernando G. / Pereira, Andreia	Evaluation of sugarcane bagasse ash for lightweight aggregates production	121604
Zheng, Zihan / Du, Yansheng / Chen, Zhihua / Li, Shuangying / Niu, Jiaqi	Experimental and theoretical studies of FRP-Steel composite plate under static tensile loading	121501
D'Anna, Jennifer / Amato, Giuseppina / Chen, Jian Fei / Minafò, Giovanni / La Mendola, Lidia	Experimental application of digital image correlation for the tensile characterization of basalt FRCM composites	121770
Sadeghi, Neda H. / Oliveira, Daniel V. / Silva, Rui A. / Mendes, Nuno / Correia, Mariana / Azizi-Bondarabadi, Hamed	Experimental characterization of adobe vaults strengthened with a TRM-based compatible composite	121568
Yu, Feng / Bu, Shuangshuang / Li, Dongang / Feng, Chaochao / Fang, Yuan	Experimental investigation and theoretical study on bearing capacity of strong PVC-FRP confined concrete column-weak joint strengthened with core steel tube under axial loading	121880
Afgan, Sher / Bing, Chen	Experimental investigation for the development of superior structural integrated thermocrete via incorporation of novel non-encapsulated paraffin aggregate	121883
Wang, Yongyan / Yu, Zhuoqun / Wang, Hongwei	Experimental investigation on some performance of rubber fiber modified cemented paste backfill	121586
Xiao, Hong / Zhang, Zhihai / Cui, Xuhao / Jin, Feng	Experimental study and discrete element analysis of ballast bed with various sand content	121869
Liu, Yanfeng / Cao, Zhenqi / Wang, Yingying / Wang, Dengjia / Liu, Jiaping	Experimental study of hygro-thermal characteristics of novel cement-cork mortars	121901
Shao, Ke / Du, Yunxing / Zhou, Fen	Feasibility of using treated corn cob aggregates in cement mortars	121575
Pan, Yuanyuan / Han, Dongdong / Yang, Tao / Tang, Dong / Huang, Yuxia / Tang, Ningxing / Zhao, Yongli	Field observations and laboratory evaluations of asphalt pavement maintenance using hot in-place recycling	121864
Autengruber, Maximilian / Lukačević, Markus / Gröstlinger, Christof / Füssl, Josef	Finite-element-based prediction of moisture-induced crack patterns for cross sections of solid wood and glued laminated timber exposed to a realistic climate condition	121775
Scorza, Daniela / Luciano, Raimondo / Mousa, Saeed / Vantadori, Sabrina	Fracture behaviour of hybrid fibre-reinforced roller-compacted concrete used in pavements	121554
Morin-Bernard, Alexandre / Blanchet, Pierre / Dagenais, Christian / Achim, Alexis	Glued-laminated timber from northern hardwoods: Effect of finger-joint profile on lamellae tensile strength	121591
Wang, Xiaoping / Hong, Li / Wu, HaiJian / Liu, HuiLin / Jia, DeMing	Grafting waste rubber powder and its application in asphalt	121881
Modler, Luís Eduardo A. / Mohamad, Gihad / Lübeck, André	Hardening process of polymeric adhesive mortars: Approach by phase angle analysis from oscillatory rheometry	121521
Hu, Jianying / Ma, Tao / Zhu, Yuhao / Huang, Xiaoming / Xu, Jian / Chen, Libiao	High-viscosity modified asphalt mixtures for double-layer porous asphalt pavement: Design optimization and evaluation metrics	121893
Su, Na / Fang, Changhua / Zhou, Hui / Tang, Tong / Zhang, Shuqin / Fei, Benhua	Hydrophobic treatment of bamboo with rosin	121507
Huang, Zujian / Sun, Yimin	Hygrothermal performance comparison study on bamboo and timber construction in Asia-Pacific bamboo areas	121602
Lee, Sangkyu / Kim, Gyuyong / Kim, Hongseop / Son, Minjae / Choe, Gyeongcheol / Kobayashi, Koichi / Nam, Jeongsoo	Impact resistance, flexural and tensile properties of amorphous metallic fiber-reinforced cementitious composites according to fiber length	121872
Liu, Shihui / Du, Kang / Huang, Wei / Wen, Kejun / Amini, Farshad / Li, Lin	Improvement of erosion-resistance of bio-bricks through fiber and multiple MICP treatments	121573
Li, Qishi / Zhang, Henglong / Chen, Zihao	Improvement of short-term aging resistance of styrene-butadiene rubber modified asphalt by Sasobit and epoxidized soybean oil	121870
González-Sánchez, J. F. / Fernández, J. M. / Navarro-Blasco, Í. / Alvarez, J. I.	Improving lime-based rendering mortars with admixtures	121887
Sajid, Hizb Ullah / Naik, Dayakar L. / Kiran, Ravi	Improving the ice-melting capacity of traditional deicers	121527
Pereira, João M. / Correia, António A. / Lourenço, Paulo B.	In-plane behaviour of rubble stone masonry walls: Experimental, numerical and analytical approach	121548
Dong, Sufen / Wang, Xinyue / Xu, Huining / Wang, Jialiang / Han, Baoguo	Incorporating super-fine stainless wires to control thermal cracking of concrete structures caused by heat of hydration	121896
Haghshenas, Hamzeh F. / Fini, Elham / Rea, Robert / Khodaii, Ali	Increasing the efficacy of recycling agents with simultaneous addition of zinc diethyldithiocarbamate as an antioxidant	121892
Pasupathy, Kirubajiny / Ramakrishnan, Sayanthan / Sanjayan, Jay	Influence of recycled concrete aggregate on the foam stability of aerated geopolymer concrete	121850
Noor-E-Khuda, Sarkar	Influence of wetting–drying cycles on compressive and flexural strength of cement mortar and CFRP-mortar bond strength	121513
Antunes, V. / Freire, A. C. / Neves, J.	Investigating aged binder mobilization and performance of RAP mixtures for surface courses	121511
Li, Ning / Zhan, He / Yu, Xin / Tang, Wei / Xue, Qinglei	Investigation of the aging behavior of cellulose fiber in reclaimed asphalt pavement	121559
Kasyap, Sathwik S. / Li, Siyue / Senetakis, Kostas	Investigation of the mechanical properties and the influence of micro-structural characteristics of aggregates using micro-indentation and Weibull analysis	121509
Salazar-Cruz, B. A. / Zapien-Castillo, S. / Hernández-Zamora, G. / Rivera-Armenta, J. L.	Investigation of the performance of asphalt binder modified by sargassum	121876
Huang, Qibo / Qian, Zhendong / Yang, Yuming / Zheng, Dong	Investigation of warm mix epoxy asphalt compaction with gyratory compactor and charge coupled photoelectric imaging	121506
Onayev, Anuarbek / Swei, Omar	IRI deterioration model for asphalt concrete pavements: capturing performance improvements over time	121768
Cao, Zhilong / Huang, Xiaoqiao / Yu, Jianying / Han, Xiaobin / Wang, Ruiyang / Li, Ying	Laboratory evaluation of the effect of rejuvenators on the interface performance of rejuvenated SBS modified bitumen mixture by surface free energy method	121866
Moreno-Juez, J. / Vegas, Iñigo J. / Frías Rojas, M. / de la Villa, R. Vigil / Guede-Vázquez, E.	Laboratory-scale study and semi-industrial validation of viability of inorganic CDW fine fractions as SCMs in blended cements	121823
Xiu, Zhanguo / Wang, Shuhong / Ji, Yingchun / Wang, Feili / Ren, Fengyu / Nguyen, Van-Tuan	Loading rate effect on the uniaxial compressive strength (UCS) behavior of cemented paste backfill (CPB)	121526
He, Yan / Zhang, Qinli / Chen, Qiusong / Bian, Jiwei / Qi, Chongchong / Kang, Qian / Feng, Yan	Mechanical and environmental characteristics of cemented paste backfill containing lithium slag-blended binder	121567
Mohit, Mehdi / Ranjbar, Ali / Sharifi, Yasser	Mechanical and microstructural properties of mortars incorporating ceramic waste powder exposed to the hydrochloric acid solution	121565
Trochoutsou, Niki / Di Benedetti, Matteo / Pilakoutas, Kypros / Guadagnini, Maurizio	Mechanical Characterisation of Flax and Jute Textile-Reinforced Mortars	121564
Sciomenta, Martina / Spera, Luca / Bedon, Chiara / Rinaldi, Vincenzo / Fragiacomo, Massimo / Romagnoli, Manuela	Mechanical characterization of novel Homogeneous Beech and hybrid Beech-Corsican Pine thin Cross-Laminated timber panels	121589
Zhou, Ke / Li, Haitao / Hong, Chaokun / Ashraf, Mahmud / Sayed, Usama / Lorenzo, Rodolfo / Corbi, Ileana / Corbi, Ottavia / Yang, Dong / Zuo, Yingfeng	Mechanical properties of large-scale parallel bamboo strand lumber under local compression	121572
Wang, Yumei / Deng, Zhiheng / Xiao, Jianzhuang / Li, Tan / Li, Jun	Mechanical properties of recycled aggregate concrete under compression-shear stress state	121894
Hou, Guihua / Yan, Ziwei / Sun, Jinfeng / Naguib, Hamdy M. / Lu, Bao / Zhang, Zuhua	Microstructure and mechanical properties of CO2-cured steel slag brick in pilot-scale	121581
Pollmann, Nele / Larsson, Fredrik / Runesson, Kenneth / Lundgren, Karin / Zandi, Kamyab / Jänicke, Ralf	Modeling and computational homogenization of chloride diffusion in three-phase meso-scale concrete	121558
Li, Xiang-Nan / Zuo, Xiao-Bao / Zou, Yu-Xiao	Modeling and simulation on coupled chloride and calcium diffusion in concrete	121557
Schneid, Eduardo / Dias de Moraes, Poliana	Modification factors of the embedding strength dependent on the temperature and load-to-grain angle for two wood species planted in Brazil	121503
Uppalapati, Siva / Vandewalle, Lucie / Cizer, Özlem	Monitoring the setting process of alkali-activated slag-fly ash cements with ultrasonic P-wave velocity	121592
Bilisik, Kadir / Ozdemir, Huseyin	Multiaxis three dimensional (3D) carbon and basalt preforms/cementitious matrix concretes: Experimental study on fiber orientation and placement by panel test	121863
Fan, Zepeng / Lin, Jiao / Chen, Zixuan / Liu, Pengfei / Wang, Dawei / Oeser, Markus	Multiscale understanding of interfacial behavior between bitumen and aggregate: From the aggregate mineralogical genome aspect	121607
Lv, Songtao / Wang, Peng / Fan, Xiyan / Borges Cabrera, Milkos / Hu, Long / Peng, Xinghai / Liu, Chaochao / Yuan, Jiang	Normalized comparative study on fatigue characteristics of different pavement materials	121907
Lin, Peng / Liu, Xueyan / Apostolidis, Panos / Erkens, Sandra / Ren, Shisong / Xu, Shi / Scarpas, Tom / Huang, Weidong	On the rejuvenator dosage optimization for aged SBS modified bitumen	121913
Cao, Qi / Lv, Xianrui / Wang, Yanlei / Wu, Zhimin / Lin, Zhibin	Performance and analysis of unidirectional GFRP actively confined high-strength concrete under monotonic and cyclic axial compression	121593
Ling, Jianming / Li, Xiang / Qian, Jinsong / Li, Xueyin	Performance comparison of different electrode materials for electro-osmosis treatment on subgrade soil	121590
Cosoli, G. / Mobili, A. / Giulietti, N. / Chiariotti, P. / Pandarese, G. / Tittarelli, F. / Bellezze, T. / Mikanovic, N. / Revel, G. M.	Performance of concretes manufactured with newly developed low-clinker cements exposed to water and chlorides: Characterization by means of electrical impedance measurements	121546
Qi, Huahui / Ma, Baoguo / Tan, Hongbo / Su, Ying / Jin, Zihao / Li, Chunbao / Liu, Xiaohai / Yang, Qi / Luo, Zhongtao	Polycarboxylate superplasticizer modified by phosphate ester in side chain and its basic properties in gypsum plaster	121566
Duong, Nga Thanh / Satomi, Tomoaki / Takahashi, Hiroshi	Potential of corn husk fiber for reinforcing cemented soil with high water content	121848
Ramlee, Nor Azlina / Naveen, Jesuarockiam / Jawaid, Mohammad	Potential of oil palm empty fruit bunch (OPEFB) and sugarcane bagasse fibers for thermal insulation application – A review	121519
Sun, Y. / Wang, K.Q / Lee, Hu Seok	Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio	121532
Sorin, Edouard / Coureau, Jean-Luc / Chaplain, Myriam	Prediction of the ultimate load-carrying capacity of wooden notched beams with and without reinforcements using a splitting model	121518
Li, Jiahao / Li, Xilong / Liang, Sha / Zhang, Yuanshang / Ye, Qiang / Zhang, Li / Pan, Chaoqun / Lv, Ruibin / Li, Qingyi / Xiao, Keke / Yan, Yilei / Chen, Ye / Hu, Jingping / Hou, Huijie / Yang :, Jiakuan	Preparation of water-permeable bricks derived from fly ash by autoclaving	121556
Wróbel, Michał / Woszuk, Agnieszka / Ratajczak, Maria / Franus, Wojciech	Properties of reclaimed asphalt pavement mixture with organic rejuvenator	121514
Esmaeili, Jamshid / Andalibi, Keyvan / Gencel, Osman / Maleki, Farshid Khosravi / Maleki, Vahid Arab	Pull-out and bond-slip performance of steel fibers with various ends shapes embedded in polymer-modified concrete	121531
Mohan, Harish T. / Jayanarayanan, Karingamanna / Mini, K. M.	Recent trends in utilization of plastics waste composites as construction materials	121520
Rivera-Gómez, Carlos / Galán-Marín, Carmen / López-Cabeza, Victoria P. / Diz-Mellado, Eduardo	Sample key features affecting mechanical, acoustic and thermal properties of a natural-stabilised earthen material	121569
Choi, Hyeonseok / Choi, Young Cheol	Setting characteristics of natural cellulose fiber reinforced cement composite	121910
Zak, Josef	Shear accumulated equilibrium compliance as permanent deforamtion susceptibility parameter	121510
Jing, Guoqing / Siahkouhi, Mohammad / Edwards, J. Riley / Dersch, Marcus S. / Hoult, N. A.	Smart railway sleepers - a review of recent developments, challenges, and future prospects	121533
Tian, Zhongnan / Zhang, Zhengqi / Zhang, Kaiwen / Tang, Xiuming / Huang, Shuolei	Statistical modeling and multi-objective optimization of road geopolymer grouting material via RSM and MOPSO	121534
Miranda, Marcela Palhares / Morsch, Inácio Benvegnu / Brisotto, Daiane de S. / Bittencourt, Eduardo / Carvalho, Eliene Pires	Steel-concrete bond behavior: An experimental and numerical study	121918
Şengün, E. / Alam, B. / Shabani, R. / Yaman, I. O.	Strength and fracture properties of roller compacted concrete (RCC) prepared by an in-situ compaction procedure	121563
Baldovino, Jair J. A. / Izzo, Ronaldo L. S. / Rose, Juliana L. / Domingos, Matheus D. I.	Strength, durability, and microstructure of geopolymers based on recycled-glass powder waste and dolomitic lime for soil stabilization	121874
Brown, Justin R. / Li, Minghao	Structural performance of dowelled cross-laminated timber hold-down connections with increased row spacing and end distance	121595
Sadiq Bhat, Faheem / Mir, Mohammad Shafi	A study investigating the influence of nano Al2O3 on the performance of SBS modified asphalt binder	121499
Li, Jun / Ma, Jie / Tong, Youdong / Fei, E. / Zhang, Zhendong	Study on fractal characteristics of pores of NAS reinforced by MICP under the control of electric field	121540
Rashidian-Dezfouli, Hassan / Rangaraju, Prasada Rao	Study on the effect of selected parameters on the alkali-silica reaction of aggregate in ground glass fiber and fly ash-based geopolymer mortars	121549
Qin, Yangxin / Chen, Xiao / Li, Beixing / Guo, Yuguang / Niu, Zidong / Xia, Tianhao / Meng, Weiwei / Zhou, Mingkai	Study on the mechanical properties and microstructure of chitosan reinforced metakaolin-based geopolymer	121522
Li, Tingyu / Liu, Xiaoming / Wei, Ziqi / Zhao, Yu / Yan, Daxiong	Study on the wear-resistant mechanism of concrete based on wear theory	121594
Jiang, Wenjing / Zhou, Gang / Wang, Cunmin / Xue, Yifang / Niu, Chenxi	Synthesis and self-healing properties of composite microcapsule based on sodium alginate/melamine-phenol–formaldehyde resin	121541
Sebastian, Wendel / Webb, Steve	Tests on prototype pretensioned natural stone beams	121555
Rangappa, Sanjay Mavinkere / Parameswaranpillai, Jyotishkumar / Yorseng, Krittirash / Pulikkalparambil, Harikrishnan / Siengchin, Suchart	Toughened bioepoxy blends and composites based on poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) triblock copolymer and sisal fiber fabrics: A new approach	121843
Yu, Rui / Zhou, Fengjiao / Yin, Tianyi / Wang, Zhiyu / Ding, Mengxi / Liu, Zhen / Leng, Yong / Gao, Xu / Shui, Zhonghe	Uncovering the approach to develop ultra-high performance concrete (UHPC) with dense meso-structure based on rheological point of view: Experiments and modeling	121500
El Machi, Aiman / Mabroum, Safaa / Taha, Yassine / Tagnit-Hamou, Arezki / Benzaazoua, Mostafa / Hakkou, Rachid	Use of flint from phosphate mine waste rocks as an alternative aggregates for concrete	121886
Zou, Chao / Long, Guangcheng / Zeng, Xiaohui / Ma, Cong / Xie, Youjun / Sun, Zhenping	Water evolution and hydration kinetics of cement paste under steam-curing condition based on low-field NMR method	121583

Informations
sur cette fiche
IssueID
54859
Publié(e) le:
09.01.2021
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - février 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - février 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.