Construction and Building Materials - January 2021

Published:	January 2021

Articles in this Issue

Author(s)	Title	Page(s)
Sitzia, Fabio / Lisci, Carla / Mirão, José	Accelerate ageing on building stone materials by simulating daily, seasonal thermo-hygrometric conditions and solar radiation of Csa Mediterranean climate	121009
Soutsos, Marios / Kanavaris, Fragkoulis / Elsageer, Mohammed	Accuracy of maturity functions’ strength estimates for fly ash concretes cured at elevated temperatures	121043
Ma, Suhua / Snellings, Ruben / Li, Xuerun / Shen, Xiaodong / Scrivener, Karen L.	Alite-ye’elimite clinker: Hydration kinetics, products and microstructure	121062
Soni, Nancy / Shukla, Dharmendra Kumar	Analytical study on mechanical properties of concrete containing crushed recycled coarse aggregate as an alternative of natural sand	120595
Yang, Jun-Mo / Jung, Jin-Young / Kim, Jin-Kook	Applicability of 2360 MPa grade prestressing steel strand: Performance of material, bond, and anchorage system	120941
Zhou, Yuqi / Liu, Weiwei	Application of granulated copper slag in massive concrete under saline soil environment	121165
Zunino, Franco / Scrivener, Karen	Assessing the effect of alkanolamine grinding aids in limestone calcined clay cements hydration	121293
Akono, Ange-Therese / Chen, Jiaxin / Zhan, Mimi / Shah, Surendra P.	Basic creep and fracture response of fine recycled aggregate concrete	121107
Moshiri, Niloufar / Czaderski, Christoph / Mostofinejad, Davood / Motavalli, Masoud	Bond resistance of prestressed CFRP strips attached to concrete by using EBR and EBROG strengthening methods	121209
Msinjili, Nsesheye S. / Vogler, Nico / Sturm, Patrick / Neubert, Markus / Schröder, Hans-Jürgen / Kühne, Hans-Carsten / Hünger, Klaus-Jürgen / Gluth, Gregor J. G.	Calcined brick clays and mixed clays as supplementary cementitious materials: Effects on the performance of blended cement mortars	120990
Felix, Emerson F. / Carrazedo, Rogério / Possan, Edna	Carbonation model for fly ash concrete based on artificial neural network: Development and parametric analysis	121050
Ji, Yanliang / Pel, Leo / Zhang, Xiaoxiao / Sun, Zhenping	Cl- and Na+ ions binding in slag and fly ash cement paste during early hydration as studied by 1H, 35Cl and 23Na NMR	121606
Biró, András / Lublóy, Éva	Classification of aggregates for fire	121024
Fabbri, Kristian / Tronchin, Lamberto / Barbieri, Fabrizio	Coconut fibre insulators: The hygrothermal behaviour in the case of green roofs	121026
Faxiang, Xie / Dingpeng, Cai / Lin, Ji / Chuanlong, Zhang / Jing, Ruan / Xiao, Lei	Combined compression-shear performance and failure criteria of internally cured concrete with super absorbent polymer	120888
Tian, Yu / Li, Hui / Zhang, Hengji / Yang, Bing / Zuo, Xin / Wang, Hanbing	Comparative investigation on three laboratory testing methods for short-term aging of asphalt binder	121204
Cai, Yamei / Zheng, Haibing / Hu, Xiang / Lu, Jianxin / Poon, Chi Sun / Li, Weihua	Comparative studies on passivation and corrosion behaviors of two types of steel bars in simulated concrete pore solution	120971
Xie, Qimiao / Wang, Tao / Guo, Shuaishuai / Ma, Chao	A comparative study of statistical methods for critical parameters at tempered glass fallout in an enclosure fire	121033
Simalti, Ashish / Singh, A. P.	Comparative study on performance of manufactured steel fiber and shredded tire recycled steel fiber reinforced self-consolidating concrete	121102
Deboodt, Tyler / Wildenschild, Dorthe / Ideker, Jason H. / Isgor, O. Burkan	Comparison of thresholding techniques for quantifying portland cement hydrates using synchrotron microtomography	121109
Shi, Can / Chen, Ziquan	Coupled DEM/FDM to evaluate track transition stiffness under different countermeasures	121167
Hasan, Muttaqin / Sugiarto, Sugiarto	Determining the properties of semi-flexible pavement using waste tire rubber powder and natural zeolite	121199
Xu, Mingfeng / Song, Song / Feng, Lei / Zhou, Jian / Li, Hui / Li, Victor C.	Development of basalt fiber engineered cementitious composites and its mechanical properties	121173
Ghosh, Debalina / Abd-Elssamd, Ammar / Ma, Zhongguo John / Hun, Diana	Development of high-early-strength fiber-reinforced self-compacting concrete	121051
Wang, Yizhuang David / Ghanbari, Amir / Shane Underwood, Benjamin / Kim, Youngsoo Richard	Development of preliminary transfer functions for performance predictions in FlexPAVE™	121182
Gao, Danying / Ding, Chong / Pang, Yuyang / Yang, Lin / Huang, Yunchao / Tang, Jiyu	Diverse angle-length-width model for 3D/4D/5D steel fiber reinforced concrete under tension	121149
Bolooki Poorsaheli, Hadi / Behravan, Amir / Tabatabaei Aghda, Seyed Taha	Durability performance of hybrid reinforced concretes (steel fiber + polyolefin fiber) in a harsh marine tidal zone of Persian Gulf	121176
Zhu, Xiuyu / Yan, Dongming / Fang, Hongyuan / Chen, Shikun / Ye, Hailong	Early-stage geopolymerization revealed by 27Al and 29Si nuclear magnetic resonance spectroscopy based on vacuum dehydration	121114
Wiesner, Felix / Thomson, Daniel / Bisby, Luke	The effect of adhesive type and ply number on the compressive strength retention of CLT at elevated temperatures	121156
Li, Haoxin / Xue, Zhi / Liang, Guangwei / Wu, Kai / Dong, Biqin / Wang, Weishan	Effect of C-S-Hs-PCE and sodium sulfate on the hydration kinetics and mechanical properties of cement paste	121096
Fan, Yueming / Liu, Wei / Sun, Zongteng / Chowwanonthapunya, Thee / Zhao, Yonggang / Dong, Baojun / Zhang, Tianyi / Banthukul, Wongpat	Effect of chloride ion on corrosion resistance of Ni-advanced weathering steel in simulated tropical marine atmosphere	120937
Krahl, Pablo Augusto / de Miranda Saleme Gidrão, Gustavo / Neto, Romeu Bessan / Carrazedo, Ricardo	Effect of curing age on pullout behavior of aligned and inclined steel fibers embedded in UHPFRC	121188
Wu, Di / Sun, Wei / Liu, Shuai / Qu, Chunlai	Effect of microwave heating on thermo-mechanical behavior of cemented tailings backfill	121180
Ahmed, Sara / Alhoubi, Yazan / Elmesalami, Nouran / Yehia, Sherif / Abed, Farid	Effect of recycled aggregates and treated wastewater on concrete subjected to different exposure conditions	120930
Yang, Jin / Hu, Huachao / He, Xingyang / Su, Ying / Wang, Yingbin / Tan, Hongbo / Pan, Han	Effect of steam curing on compressive strength and microstructure of high volume ultrafine fly ash cement mortar	120894
Jiang, Xing / Mu, Song / Yang, Zhiqiang / Tang, Jinhui / Li, Tian	Effect of temperature on durability of cement-based material to physical sulfate attack	120936
Andrade Neto, José da Silva / de França, Mavisson Júlio Santos / Amorim Júnior, Nilson Santana de / Ribeiro, Daniel Véras	Effects of adding sugarcane bagasse ash on the properties and durability of concrete	120959
Lou, Keke / Kang, Aihong / Xiao, Peng / Wu, Zhengguang / Li, Bo / Wang, Xinyue	Effects of basalt fiber coated with different sizing agents on performance and microstructures of asphalt mixture	121155
Kim, Sang Yeob / Kim, Youngdae / Lee, Jong-Sub	Effects of frozen water content and silt fraction on unconfined compressive behavior of fill materials	120912
Mowlaei, Roozbeh / Lin, Junlin / de Souza, Felipe Basquiroto / Fouladi, Amirsina / Habibnejad korayem, Asghar / Shamsaei, Ezzatollah / Duan, Wenhui	The effects of graphene oxide-silica nanohybrids on the workability, hydration, and mechanical properties of Portland cement paste	121016
Almakhadmeh, M. / Soliman, A. M.	Effects of mixing water temperatures on properties of one-part alkali-activated slag paste	121030
Kani, Ebrahim Najafi / Rafiean, Amir Hossein / Alishah, Abbas / Hojjati Astani, Saeid / Ghaffar, Seyed Hamidreza	The effects of Nano-Fe2O3 on the mechanical, physical and microstructure of cementitious composites	121137
Zhang, Yi / Li, Hui / Abdelhady, Ahmed / Yang, Jie / Wang, Hanbing	Effects of specimen shape and size on the permeability and mechanical properties of porous concrete	121074
Yoo, Doo-Yeol / You, Ilhwan / Zi, Goangseup	Effects of waste liquid–crystal display glass powder and fiber geometry on the mechanical properties of ultra-high-performance concrete	120938
Robalo, Keila / Soldado, Eliana / Costa, Hugo / do Carmo, Ricardo / Alves, Helena / Júlio, Eduardo	Efficiency of cement content and of compactness on mechanical performance of low cement concrete designed with packing optimization	121077
Nguyen, Hoang / Vu, Thanh / Vo, Thuc P. / Thai, Huu-Tai	Efficient machine learning models for prediction of concrete strengths	120950
Chen, Hui / Zhang, Yuan / Bahia, Hussain U.	Estimating asphalt binder fatigue at multiple temperatures using a simplified pseudo-strain energy analysis approach in the LAS test	120911
Zhu, Hongbo / Zhou, Haiyun / Gou, Hongxiang	Evaluation of carbon fiber dispersion in cement-based materials using mechanical properties, conductivity, mass variation coefficient, and microstructure	120891
Li, Bo / Li, Xiaolan / Kundwa, Marie Judith / Li, Zhiwei / Wei, Dingbang	Evaluation of the adhesion characteristics of material composition for polyphosphoric acid and SBS modified bitumen based on surface free energy theory	121022
Khan, Md. Nabi Newaz / Saha, Ashish Kumer / Sarker, Prabir Kumar	Evaluation of the ASR of waste glass fine aggregate in alkali activated concrete by concrete prism tests	121121
Apaza Apaza, Freddy Richard / Rodrigues Guimarães, Antonio Carlos / Marcos Vivoni, Alexander / Schroder, Ricardo	Evaluation of the performance of iron ore waste as potential recycled aggregate for micro-surfacing type cold asphalt mixtures	121020
Arslan, Onur / Messali, Francesco / Smyrou, Eleni / Bal, Ihsan E. / Rots, Jan G.	Experimental characterization of the axial behavior of traditional masonry wall metal tie connections in cavity walls	121141
Gaurav, Govind / Singh, Bhupinder	Experimental investigation for splice strength of deformed steel bars in normal-, medium- and high-strength recycled aggregate concrete	121185
Tian, Kaipei / Ožbolt, Jośko / Hofmann, Jan	Experimental investigation of concrete edge failure for single stud anchors and anchor groups after fire exposure	120982
Zhou, Jikai / Jin, Song / Sun, Lu	Experimental investigation on the influence of multiscale pores on the static and dynamic splitting tensile strength of cementitious materials based on the virtual pore method	120956
Shi, Benkai / Liu, Weiqing / Yang, Huifeng	Experimental investigation on the long-term behaviour of prefabricated timber-concrete composite beams with steel plate connections	120892
Wangmo, Phuntsho / Shrestha, Kshitij C. / Aoki, Takayoshi	Exploratory study of rammed earth walls under static element test	121035
Lv, Huijie / Liu, Hanqi / Tan, Yiqiu / Meng, Anxin / Assogba, Ogoubi Cyriaque / Xiao, Shenqing	An extended search method for identifying optimal parameters of the generalized Maxwell model	120796
Ozersky, Alexander / Khomyakov, Alexander / Peterson, Karl	Extended shelf life cement: Principles, microstructural analysis, and physical–mechanical properties of the cement and concrete	121202
Diab, S. H. / Soliman, A. M. / Nokken, M. R.	Feasibility of basalt and glass FRP mesh for strengthening and confinement concrete damage due to ASR-expansion	120893
Xia, Wenjing / Wang, Siwen / Xu, Tao / Jin, Guanglai	Flame retarding and smoke suppressing mechanisms of nano composite flame retardants on bitumen and bituminous mixture	121203
Shafabakhsh, GholamAli / Sadeghnejad, Mostafa / Ebrahimnia, Roya	Fracture resistance of asphalt mixtures under mixed-mode I/II loading at low-temperature: Without and with nano SiO2	120954
Singh, Ran Bir / Debbarma, Solomon / Kumar, Navanit / Singh, Surender	Hardened state behaviour of self-compacting concrete pavement mixes containing alternative aggregates and secondary binders	120624
Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed	Hybrid effect of carbon nanotubes and polypropylene microfibers on fire resistance, thermal characteristics and microstructure of cementitious composites	121154
Wang, Jie / Ma, Baoguo / Tan, Hongbo / Du, Chao / Chu, Zhugen / Luo, Zhongtao / Wang, Penggang	Hydration and mechanical properties of cement-marble powder system incorporating triisopropanolamine	121068
Xue, Lili / Zhang, Zuhua / Wang, Hao	Hydration mechanisms and durability of hybrid alkaline cements (HACs): A review	121039
Bottino-Leone, Dario / Larcher, Marco / Troi, Alexandra / Grunewald, John	Hygrothermal characterization of a fictitious homogenized porous material to describe multiphase heat and moisture transport in massive historic walls	121497
Wu, Jieqiong / Xu, Jianchao / Diao, Bo / Panesar, Daman K.	Impacts of reinforcement ratio and fatigue load level on the chloride ingress and service life estimating of fatigue loaded reinforced concrete (RC) beams	120999
Zhu, Wanrong / Gong, Meng / Chui, Ying-Hei / Li, Ling	Improved fastening designs for bridge decks made of mechanically-laminated timber	121166
Lubelli, B. / Moerman, J. / Esposito, R. / Mulder, K.	Influence of brick and mortar properties on bioreceptivity of masonry – Results from experimental research	121036
Huang, Xin / Pang, Jianyong / Liu, Guangcheng / Chen, Yu	The influence of equal amplitude high stress repeated loading on the mechanical and deformation characteristics of rubber concrete	121135
Şengül, Kemal / Erdoğan, Sinan T.	Influence of ground perlite on the hydration and strength development of calcium aluminate cement mortars	120943
Winnefeld, Frank / Kaufmann, Josef / Loser, Roman / Leemann, Andreas	Influence of shotcrete accelerators on the hydration of cement pastes and their impact on sulfate resistance	120782
Geiser, M. / Bergmann, M. / Follesa, M.	Influence of steel properties on the ductility of doweled timber connections	121152
Ouria, Ahad / Karamzadegan, Saeed / Emami, Sabah	Interface properties of a cement coated geocomposite	121014
Delarami, Aref / Mohammadzadeh Moghaddam, Abolfazl / Rasaei Yazadani, Mohammadreza / Najjar, Shima	Investigation of the main and interactive effects of mix design factors on the properties of cement emulsified asphalt mortars using Mixture Design of experiment	120975
Kang, Min-Chang / Yoo, Doo-Yeol / Gupta, Rishi	Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete	121117
Yan, Zhuhua / Sun, Zhenping / Yang, Jingbin / Yang, Haijing / Ji, Yanliang / Hu, Kuangyi	Mechanical performance and reaction mechanism of copper slag activated with sodium silicate or sodium hydroxide	120900
Damiani, Robbie M. / Mondal, Paramita / Lange, David A.	Mechanical performance of rubberized cement paste with calcium sulfoaluminate cement addition	120790
Yuan, Zhu / Jia, Yanmin	Mechanical properties and microstructure of glass fiber and polypropylene fiber reinforced concrete: An experimental study	121048
Alchaar, Aktham S. / Al-Tamimi, Adil K.	Mechanical properties of 3D printed concrete in hot temperatures	120991
Li, Na / Wang, Xiaoyu / Mu, Yuandong / Zhang, Ronghui / Zhu, Lingling / Ye, Guotian	Mechanical property and phase evolution of the hydrates of CAC-bonded alumina castables during drying at 110 °C	120962
Yu, Yong / Zheng, Yu / Guo, Yongchang / Hu, Shouwang / Hua, Kaihui	Mesoscale finite element modeling of recycled aggregate concrete under axial tension	121002
Zheng, Zhishan / Wei, Xiaosheng	Mesoscopic models and numerical simulations of the temperature field and hydration degree in early-age concrete	121001
Iwański, Marek / Mazurek, Grzegorz / Buczyński, Przemysław / Zapała-Sławeta, Justyna	Multidimensional analysis of foaming process impact on 50/70 bitumen ageing	121231
Zhao, Shujie / Xia, Ming / Yu, Lin / Huang, Xiao / Jiao, Binquan / Li, Dongwei	Optimization for the preparation of composite geopolymer using response surface methodology and its application in lead-zinc tailings solidification	120969
Li, Yue / Cao, Dongwei / Zhang, Yanjun / Jia, Xiaopeng	Performance of a dry-method-epoxy modifier and a modified epoxy-asphalt mixture	120229
Adesina, Adeyemi	Performance of cementitious composites reinforced with chopped basalt fibres – An overview	120970
Song, Shuaiqi / You, Peibo	Performance of plastic concrete under true tri-axial compressive stress	121106
Behnood, Ali / Golafshani, Emadaldin Mohammadi	Predicting the dynamic modulus of asphalt mixture using machine learning techniques: An application of multi biogeography-based programming	120983
Zhao, Y. X. / Wang, Y. Z. / Dong, J. F.	Prediction of corrosion-induced concrete cracking under external loading and stirrup constraint	121053
Tan, Yongshan / Yu, Hongfa / Sun, Shikuan / Wu, Chengyou / Ding, Hao	Properties and microstructure of basic magnesium sulfate cement: Influence of silica fume	121076
De Filippis, Ugo / Prud'homme, Elodie / Meille, Sylvain	Relation between activator ratio, hydration products and mechanical properties of alkali-activated slag	120940
Wang, Xiaoxian / Jin, Zuquan / Liu, Jiaping / Chen, Fanxiu / Feng, Pan / Tang, Jinhui	Research on internal monitoring of reinforced concrete under accelerated corrosion, using XCT and DIC technology	121018
Liang, Bo / Lan, Fang / Shi, Kai / Qian, Guoping / Liu, Zhengchun / Zheng, Jianlong	Review on the self-healing of asphalt materials: Mechanism, affecting factors, assessments and improvements	120453
Huang, Kai / Onifade, Ibrahim / Birgisson, Björn	Rutting performance of flexible pavements using new energy-based potentials	120896
Gupta, Anik / Castro-Fresno, Daniel / Lastra-González, Pedro / Rodriguez-Hernandez, Jorge	Selection of fibers to improve porous asphalt mixtures using multi-criteria analysis	121198
Wu, Shuyin / Yang, Jun / Yang, Ruochong / Zhu, Jipeng / Sun, Xiaoyin	Self-healing acceleration and interface optimization of steel deck pavement with MgO and SAP	121139
Mehrpay, Saeid / Ueda, Tamon	Simulation of steel fibre reinforced concrete using RBCS discrete model	120889
Zhang, Dong / Liu, Yuchen / Tan, Kang Hai	Spalling resistance and mechanical properties of strain-hardening ultra-high performance concrete at elevated temperature	120961
Mondal, Sandip / Ghosh, Aparna (Dey)	Spore-forming Bacillus subtilis vis-à-vis non-spore-forming Deinococcus radiodurans, a novel bacterium for self-healing of concrete structures: A comparative study	121122
Da, Yongqi / He, Tingshu / Shi, Chen / Wang, Minhao / Feng, Yun	Studies on the formation and hydration of tricalcium silicate doped with CaF2 and TiO2	121128
Liu, Jianxing / Wang, Ping / Liu, Ganzhong / Dai, Jiacheng / Xiao, Jieling / Liu, Hao	Study of the characteristics of ballast bed resistance for different temperature and humidity conditions	121115
Karnati, Sidharth Reddy / Oldham, Daniel / Fini, Elham H. / Zhang, Lifeng	Surface functionalization of silica nanoparticles with swine manure-derived bio-binder to enhance bitumen performance in road pavement	121000
Xi, Yulin / Qi, Yanli / Mao, Zepeng / Yang, Zhangbin / Zhang, Jun	Surface hydrophobic modification of TiO2 and its application to preparing PMMA/TiO2 composite cool material with improved hydrophobicity and anti-icing property	120916
Cuenca, Estefanía / Mezzena, Alessandro / Ferrara, Liberato	Synergy between crystalline admixtures and nano-constituents in enhancing autogenous healing capacity of cementitious composites under cracking and healing cycles in aggressive waters	121447
Hosahally Nanjegowda, Vinay / Patel, Rituraj / Mahimaluru, Jagadeesh / Biligiri, Krishna Prapoorna	Synthesis and characterization of zeolite-like additive: An eco-efficient asphalt mix production strategy	120898
Pagliaro, Francesco / Lotti, Paolo / Battiston, Tommaso / Comboni, Davide / Gatta, G. Diego / Cámara, Fernando / Milani, Sula / Merlini, Marco / Glazyrin, Konstantin / Liermann, Hanns-Peter	Thermal and compressional behavior of the natural borate kurnakovite, MgB3O3(OH)5·5H2O	121094
Johra, Hicham / Margheritini, Lucia / Antonov, Yovko Ivanov / Meyer Frandsen, Kirstine / Enggrob Simonsen, Morten / Møldrup, Per / Jensen, Rasmus Lund	Thermal, moisture and mechanical properties of Seacrete: A sustainable sea-grown building material	121025
Xu, Yading / Schlangen, Erik / Luković, Mladena / Savija, Branko	Tunable mechanical behavior of auxetic cementitious cellular composites (CCCs): Experiments and simulations	121388
Zhang, Shipeng / Ghouleh, Zaid / He, Zhen / Hu, Lingling / Shao, Yixin	Use of municipal solid waste incineration bottom ash as a supplementary cementitious material in dry-cast concrete	120890
Liu, Dongsheng / Quan, Xin / Zhou, Lixin / Huang, Qian / Wang, Chaoqiang	Utilization of waste concrete powder with different particle size as absorbents for SO2 reduction	121005
Turk, Kazim / Bassurucu, Mahmut / Bitkin, Rifat Enes	Workability, strength and flexural toughness properties of hybrid steel fiber reinforced SCC with high-volume fiber	120944

About this
data sheet
IssueID
37635
Published on:
04/10/2020
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - January 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - January 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.