Construction and Building Materials - janvier 2021

Publié:	janvier 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Sitzia, Fabio / Lisci, Carla / Mirão, José	Accelerate ageing on building stone materials by simulating daily, seasonal thermo-hygrometric conditions and solar radiation of Csa Mediterranean climate	121009
Soutsos, Marios / Kanavaris, Fragkoulis / Elsageer, Mohammed	Accuracy of maturity functions’ strength estimates for fly ash concretes cured at elevated temperatures	121043
Ma, Suhua / Snellings, Ruben / Li, Xuerun / Shen, Xiaodong / Scrivener, Karen L.	Alite-ye’elimite clinker: Hydration kinetics, products and microstructure	121062
Soni, Nancy / Shukla, Dharmendra Kumar	Analytical study on mechanical properties of concrete containing crushed recycled coarse aggregate as an alternative of natural sand	120595
Yang, Jun-Mo / Jung, Jin-Young / Kim, Jin-Kook	Applicability of 2360 MPa grade prestressing steel strand: Performance of material, bond, and anchorage system	120941
Zhou, Yuqi / Liu, Weiwei	Application of granulated copper slag in massive concrete under saline soil environment	121165
Zunino, Franco / Scrivener, Karen	Assessing the effect of alkanolamine grinding aids in limestone calcined clay cements hydration	121293
Akono, Ange-Therese / Chen, Jiaxin / Zhan, Mimi / Shah, Surendra P.	Basic creep and fracture response of fine recycled aggregate concrete	121107
Moshiri, Niloufar / Czaderski, Christoph / Mostofinejad, Davood / Motavalli, Masoud	Bond resistance of prestressed CFRP strips attached to concrete by using EBR and EBROG strengthening methods	121209
Msinjili, Nsesheye S. / Vogler, Nico / Sturm, Patrick / Neubert, Markus / Schröder, Hans-Jürgen / Kühne, Hans-Carsten / Hünger, Klaus-Jürgen / Gluth, Gregor J. G.	Calcined brick clays and mixed clays as supplementary cementitious materials: Effects on the performance of blended cement mortars	120990
Felix, Emerson F. / Carrazedo, Rogério / Possan, Edna	Carbonation model for fly ash concrete based on artificial neural network: Development and parametric analysis	121050
Ji, Yanliang / Pel, Leo / Zhang, Xiaoxiao / Sun, Zhenping	Cl- and Na+ ions binding in slag and fly ash cement paste during early hydration as studied by 1H, 35Cl and 23Na NMR	121606
Biró, András / Lublóy, Éva	Classification of aggregates for fire	121024
Fabbri, Kristian / Tronchin, Lamberto / Barbieri, Fabrizio	Coconut fibre insulators: The hygrothermal behaviour in the case of green roofs	121026
Faxiang, Xie / Dingpeng, Cai / Lin, Ji / Chuanlong, Zhang / Jing, Ruan / Xiao, Lei	Combined compression-shear performance and failure criteria of internally cured concrete with super absorbent polymer	120888
Tian, Yu / Li, Hui / Zhang, Hengji / Yang, Bing / Zuo, Xin / Wang, Hanbing	Comparative investigation on three laboratory testing methods for short-term aging of asphalt binder	121204
Cai, Yamei / Zheng, Haibing / Hu, Xiang / Lu, Jianxin / Poon, Chi Sun / Li, Weihua	Comparative studies on passivation and corrosion behaviors of two types of steel bars in simulated concrete pore solution	120971
Xie, Qimiao / Wang, Tao / Guo, Shuaishuai / Ma, Chao	A comparative study of statistical methods for critical parameters at tempered glass fallout in an enclosure fire	121033
Simalti, Ashish / Singh, A. P.	Comparative study on performance of manufactured steel fiber and shredded tire recycled steel fiber reinforced self-consolidating concrete	121102
Deboodt, Tyler / Wildenschild, Dorthe / Ideker, Jason H. / Isgor, O. Burkan	Comparison of thresholding techniques for quantifying portland cement hydrates using synchrotron microtomography	121109
Shi, Can / Chen, Ziquan	Coupled DEM/FDM to evaluate track transition stiffness under different countermeasures	121167
Hasan, Muttaqin / Sugiarto, Sugiarto	Determining the properties of semi-flexible pavement using waste tire rubber powder and natural zeolite	121199
Xu, Mingfeng / Song, Song / Feng, Lei / Zhou, Jian / Li, Hui / Li, Victor C.	Development of basalt fiber engineered cementitious composites and its mechanical properties	121173
Ghosh, Debalina / Abd-Elssamd, Ammar / Ma, Zhongguo John / Hun, Diana	Development of high-early-strength fiber-reinforced self-compacting concrete	121051
Wang, Yizhuang David / Ghanbari, Amir / Shane Underwood, Benjamin / Kim, Youngsoo Richard	Development of preliminary transfer functions for performance predictions in FlexPAVE™	121182
Gao, Danying / Ding, Chong / Pang, Yuyang / Yang, Lin / Huang, Yunchao / Tang, Jiyu	Diverse angle-length-width model for 3D/4D/5D steel fiber reinforced concrete under tension	121149
Bolooki Poorsaheli, Hadi / Behravan, Amir / Tabatabaei Aghda, Seyed Taha	Durability performance of hybrid reinforced concretes (steel fiber + polyolefin fiber) in a harsh marine tidal zone of Persian Gulf	121176
Zhu, Xiuyu / Yan, Dongming / Fang, Hongyuan / Chen, Shikun / Ye, Hailong	Early-stage geopolymerization revealed by 27Al and 29Si nuclear magnetic resonance spectroscopy based on vacuum dehydration	121114
Wiesner, Felix / Thomson, Daniel / Bisby, Luke	The effect of adhesive type and ply number on the compressive strength retention of CLT at elevated temperatures	121156
Li, Haoxin / Xue, Zhi / Liang, Guangwei / Wu, Kai / Dong, Biqin / Wang, Weishan	Effect of C-S-Hs-PCE and sodium sulfate on the hydration kinetics and mechanical properties of cement paste	121096
Fan, Yueming / Liu, Wei / Sun, Zongteng / Chowwanonthapunya, Thee / Zhao, Yonggang / Dong, Baojun / Zhang, Tianyi / Banthukul, Wongpat	Effect of chloride ion on corrosion resistance of Ni-advanced weathering steel in simulated tropical marine atmosphere	120937
Krahl, Pablo Augusto / de Miranda Saleme Gidrão, Gustavo / Neto, Romeu Bessan / Carrazedo, Ricardo	Effect of curing age on pullout behavior of aligned and inclined steel fibers embedded in UHPFRC	121188
Wu, Di / Sun, Wei / Liu, Shuai / Qu, Chunlai	Effect of microwave heating on thermo-mechanical behavior of cemented tailings backfill	121180
Ahmed, Sara / Alhoubi, Yazan / Elmesalami, Nouran / Yehia, Sherif / Abed, Farid	Effect of recycled aggregates and treated wastewater on concrete subjected to different exposure conditions	120930
Yang, Jin / Hu, Huachao / He, Xingyang / Su, Ying / Wang, Yingbin / Tan, Hongbo / Pan, Han	Effect of steam curing on compressive strength and microstructure of high volume ultrafine fly ash cement mortar	120894
Jiang, Xing / Mu, Song / Yang, Zhiqiang / Tang, Jinhui / Li, Tian	Effect of temperature on durability of cement-based material to physical sulfate attack	120936
Andrade Neto, José da Silva / de França, Mavisson Júlio Santos / Amorim Júnior, Nilson Santana de / Ribeiro, Daniel Véras	Effects of adding sugarcane bagasse ash on the properties and durability of concrete	120959
Lou, Keke / Kang, Aihong / Xiao, Peng / Wu, Zhengguang / Li, Bo / Wang, Xinyue	Effects of basalt fiber coated with different sizing agents on performance and microstructures of asphalt mixture	121155
Kim, Sang Yeob / Kim, Youngdae / Lee, Jong-Sub	Effects of frozen water content and silt fraction on unconfined compressive behavior of fill materials	120912
Mowlaei, Roozbeh / Lin, Junlin / de Souza, Felipe Basquiroto / Fouladi, Amirsina / Habibnejad korayem, Asghar / Shamsaei, Ezzatollah / Duan, Wenhui	The effects of graphene oxide-silica nanohybrids on the workability, hydration, and mechanical properties of Portland cement paste	121016
Almakhadmeh, M. / Soliman, A. M.	Effects of mixing water temperatures on properties of one-part alkali-activated slag paste	121030
Kani, Ebrahim Najafi / Rafiean, Amir Hossein / Alishah, Abbas / Hojjati Astani, Saeid / Ghaffar, Seyed Hamidreza	The effects of Nano-Fe2O3 on the mechanical, physical and microstructure of cementitious composites	121137
Zhang, Yi / Li, Hui / Abdelhady, Ahmed / Yang, Jie / Wang, Hanbing	Effects of specimen shape and size on the permeability and mechanical properties of porous concrete	121074
Yoo, Doo-Yeol / You, Ilhwan / Zi, Goangseup	Effects of waste liquid–crystal display glass powder and fiber geometry on the mechanical properties of ultra-high-performance concrete	120938
Robalo, Keila / Soldado, Eliana / Costa, Hugo / do Carmo, Ricardo / Alves, Helena / Júlio, Eduardo	Efficiency of cement content and of compactness on mechanical performance of low cement concrete designed with packing optimization	121077
Nguyen, Hoang / Vu, Thanh / Vo, Thuc P. / Thai, Huu-Tai	Efficient machine learning models for prediction of concrete strengths	120950
Chen, Hui / Zhang, Yuan / Bahia, Hussain U.	Estimating asphalt binder fatigue at multiple temperatures using a simplified pseudo-strain energy analysis approach in the LAS test	120911
Zhu, Hongbo / Zhou, Haiyun / Gou, Hongxiang	Evaluation of carbon fiber dispersion in cement-based materials using mechanical properties, conductivity, mass variation coefficient, and microstructure	120891
Li, Bo / Li, Xiaolan / Kundwa, Marie Judith / Li, Zhiwei / Wei, Dingbang	Evaluation of the adhesion characteristics of material composition for polyphosphoric acid and SBS modified bitumen based on surface free energy theory	121022
Khan, Md. Nabi Newaz / Saha, Ashish Kumer / Sarker, Prabir Kumar	Evaluation of the ASR of waste glass fine aggregate in alkali activated concrete by concrete prism tests	121121
Apaza Apaza, Freddy Richard / Rodrigues Guimarães, Antonio Carlos / Marcos Vivoni, Alexander / Schroder, Ricardo	Evaluation of the performance of iron ore waste as potential recycled aggregate for micro-surfacing type cold asphalt mixtures	121020
Arslan, Onur / Messali, Francesco / Smyrou, Eleni / Bal, Ihsan E. / Rots, Jan G.	Experimental characterization of the axial behavior of traditional masonry wall metal tie connections in cavity walls	121141
Gaurav, Govind / Singh, Bhupinder	Experimental investigation for splice strength of deformed steel bars in normal-, medium- and high-strength recycled aggregate concrete	121185
Tian, Kaipei / Ožbolt, Jośko / Hofmann, Jan	Experimental investigation of concrete edge failure for single stud anchors and anchor groups after fire exposure	120982
Zhou, Jikai / Jin, Song / Sun, Lu	Experimental investigation on the influence of multiscale pores on the static and dynamic splitting tensile strength of cementitious materials based on the virtual pore method	120956
Shi, Benkai / Liu, Weiqing / Yang, Huifeng	Experimental investigation on the long-term behaviour of prefabricated timber-concrete composite beams with steel plate connections	120892
Wangmo, Phuntsho / Shrestha, Kshitij C. / Aoki, Takayoshi	Exploratory study of rammed earth walls under static element test	121035
Lv, Huijie / Liu, Hanqi / Tan, Yiqiu / Meng, Anxin / Assogba, Ogoubi Cyriaque / Xiao, Shenqing	An extended search method for identifying optimal parameters of the generalized Maxwell model	120796
Ozersky, Alexander / Khomyakov, Alexander / Peterson, Karl	Extended shelf life cement: Principles, microstructural analysis, and physical–mechanical properties of the cement and concrete	121202
Diab, S. H. / Soliman, A. M. / Nokken, M. R.	Feasibility of basalt and glass FRP mesh for strengthening and confinement concrete damage due to ASR-expansion	120893
Xia, Wenjing / Wang, Siwen / Xu, Tao / Jin, Guanglai	Flame retarding and smoke suppressing mechanisms of nano composite flame retardants on bitumen and bituminous mixture	121203
Shafabakhsh, GholamAli / Sadeghnejad, Mostafa / Ebrahimnia, Roya	Fracture resistance of asphalt mixtures under mixed-mode I/II loading at low-temperature: Without and with nano SiO2	120954
Singh, Ran Bir / Debbarma, Solomon / Kumar, Navanit / Singh, Surender	Hardened state behaviour of self-compacting concrete pavement mixes containing alternative aggregates and secondary binders	120624
Irshidat, Mohammad R. / Al-Nuaimi, Nasser / Rabie, Mohamed	Hybrid effect of carbon nanotubes and polypropylene microfibers on fire resistance, thermal characteristics and microstructure of cementitious composites	121154
Wang, Jie / Ma, Baoguo / Tan, Hongbo / Du, Chao / Chu, Zhugen / Luo, Zhongtao / Wang, Penggang	Hydration and mechanical properties of cement-marble powder system incorporating triisopropanolamine	121068
Xue, Lili / Zhang, Zuhua / Wang, Hao	Hydration mechanisms and durability of hybrid alkaline cements (HACs): A review	121039
Bottino-Leone, Dario / Larcher, Marco / Troi, Alexandra / Grunewald, John	Hygrothermal characterization of a fictitious homogenized porous material to describe multiphase heat and moisture transport in massive historic walls	121497
Wu, Jieqiong / Xu, Jianchao / Diao, Bo / Panesar, Daman K.	Impacts of reinforcement ratio and fatigue load level on the chloride ingress and service life estimating of fatigue loaded reinforced concrete (RC) beams	120999
Zhu, Wanrong / Gong, Meng / Chui, Ying-Hei / Li, Ling	Improved fastening designs for bridge decks made of mechanically-laminated timber	121166
Lubelli, B. / Moerman, J. / Esposito, R. / Mulder, K.	Influence of brick and mortar properties on bioreceptivity of masonry – Results from experimental research	121036
Huang, Xin / Pang, Jianyong / Liu, Guangcheng / Chen, Yu	The influence of equal amplitude high stress repeated loading on the mechanical and deformation characteristics of rubber concrete	121135
Şengül, Kemal / Erdoğan, Sinan T.	Influence of ground perlite on the hydration and strength development of calcium aluminate cement mortars	120943
Winnefeld, Frank / Kaufmann, Josef / Loser, Roman / Leemann, Andreas	Influence of shotcrete accelerators on the hydration of cement pastes and their impact on sulfate resistance	120782
Geiser, M. / Bergmann, M. / Follesa, M.	Influence of steel properties on the ductility of doweled timber connections	121152
Ouria, Ahad / Karamzadegan, Saeed / Emami, Sabah	Interface properties of a cement coated geocomposite	121014
Delarami, Aref / Mohammadzadeh Moghaddam, Abolfazl / Rasaei Yazadani, Mohammadreza / Najjar, Shima	Investigation of the main and interactive effects of mix design factors on the properties of cement emulsified asphalt mortars using Mixture Design of experiment	120975
Kang, Min-Chang / Yoo, Doo-Yeol / Gupta, Rishi	Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete	121117
Yan, Zhuhua / Sun, Zhenping / Yang, Jingbin / Yang, Haijing / Ji, Yanliang / Hu, Kuangyi	Mechanical performance and reaction mechanism of copper slag activated with sodium silicate or sodium hydroxide	120900
Damiani, Robbie M. / Mondal, Paramita / Lange, David A.	Mechanical performance of rubberized cement paste with calcium sulfoaluminate cement addition	120790
Yuan, Zhu / Jia, Yanmin	Mechanical properties and microstructure of glass fiber and polypropylene fiber reinforced concrete: An experimental study	121048
Alchaar, Aktham S. / Al-Tamimi, Adil K.	Mechanical properties of 3D printed concrete in hot temperatures	120991
Li, Na / Wang, Xiaoyu / Mu, Yuandong / Zhang, Ronghui / Zhu, Lingling / Ye, Guotian	Mechanical property and phase evolution of the hydrates of CAC-bonded alumina castables during drying at 110 °C	120962
Yu, Yong / Zheng, Yu / Guo, Yongchang / Hu, Shouwang / Hua, Kaihui	Mesoscale finite element modeling of recycled aggregate concrete under axial tension	121002
Zheng, Zhishan / Wei, Xiaosheng	Mesoscopic models and numerical simulations of the temperature field and hydration degree in early-age concrete	121001
Iwański, Marek / Mazurek, Grzegorz / Buczyński, Przemysław / Zapała-Sławeta, Justyna	Multidimensional analysis of foaming process impact on 50/70 bitumen ageing	121231
Zhao, Shujie / Xia, Ming / Yu, Lin / Huang, Xiao / Jiao, Binquan / Li, Dongwei	Optimization for the preparation of composite geopolymer using response surface methodology and its application in lead-zinc tailings solidification	120969
Li, Yue / Cao, Dongwei / Zhang, Yanjun / Jia, Xiaopeng	Performance of a dry-method-epoxy modifier and a modified epoxy-asphalt mixture	120229
Adesina, Adeyemi	Performance of cementitious composites reinforced with chopped basalt fibres – An overview	120970
Song, Shuaiqi / You, Peibo	Performance of plastic concrete under true tri-axial compressive stress	121106
Behnood, Ali / Golafshani, Emadaldin Mohammadi	Predicting the dynamic modulus of asphalt mixture using machine learning techniques: An application of multi biogeography-based programming	120983
Zhao, Y. X. / Wang, Y. Z. / Dong, J. F.	Prediction of corrosion-induced concrete cracking under external loading and stirrup constraint	121053
Tan, Yongshan / Yu, Hongfa / Sun, Shikuan / Wu, Chengyou / Ding, Hao	Properties and microstructure of basic magnesium sulfate cement: Influence of silica fume	121076
De Filippis, Ugo / Prud'homme, Elodie / Meille, Sylvain	Relation between activator ratio, hydration products and mechanical properties of alkali-activated slag	120940
Wang, Xiaoxian / Jin, Zuquan / Liu, Jiaping / Chen, Fanxiu / Feng, Pan / Tang, Jinhui	Research on internal monitoring of reinforced concrete under accelerated corrosion, using XCT and DIC technology	121018
Liang, Bo / Lan, Fang / Shi, Kai / Qian, Guoping / Liu, Zhengchun / Zheng, Jianlong	Review on the self-healing of asphalt materials: Mechanism, affecting factors, assessments and improvements	120453
Huang, Kai / Onifade, Ibrahim / Birgisson, Björn	Rutting performance of flexible pavements using new energy-based potentials	120896
Gupta, Anik / Castro-Fresno, Daniel / Lastra-González, Pedro / Rodriguez-Hernandez, Jorge	Selection of fibers to improve porous asphalt mixtures using multi-criteria analysis	121198
Wu, Shuyin / Yang, Jun / Yang, Ruochong / Zhu, Jipeng / Sun, Xiaoyin	Self-healing acceleration and interface optimization of steel deck pavement with MgO and SAP	121139
Mehrpay, Saeid / Ueda, Tamon	Simulation of steel fibre reinforced concrete using RBCS discrete model	120889
Zhang, Dong / Liu, Yuchen / Tan, Kang Hai	Spalling resistance and mechanical properties of strain-hardening ultra-high performance concrete at elevated temperature	120961
Mondal, Sandip / Ghosh, Aparna (Dey)	Spore-forming Bacillus subtilis vis-à-vis non-spore-forming Deinococcus radiodurans, a novel bacterium for self-healing of concrete structures: A comparative study	121122
Da, Yongqi / He, Tingshu / Shi, Chen / Wang, Minhao / Feng, Yun	Studies on the formation and hydration of tricalcium silicate doped with CaF2 and TiO2	121128
Liu, Jianxing / Wang, Ping / Liu, Ganzhong / Dai, Jiacheng / Xiao, Jieling / Liu, Hao	Study of the characteristics of ballast bed resistance for different temperature and humidity conditions	121115
Karnati, Sidharth Reddy / Oldham, Daniel / Fini, Elham H. / Zhang, Lifeng	Surface functionalization of silica nanoparticles with swine manure-derived bio-binder to enhance bitumen performance in road pavement	121000
Xi, Yulin / Qi, Yanli / Mao, Zepeng / Yang, Zhangbin / Zhang, Jun	Surface hydrophobic modification of TiO2 and its application to preparing PMMA/TiO2 composite cool material with improved hydrophobicity and anti-icing property	120916
Cuenca, Estefanía / Mezzena, Alessandro / Ferrara, Liberato	Synergy between crystalline admixtures and nano-constituents in enhancing autogenous healing capacity of cementitious composites under cracking and healing cycles in aggressive waters	121447
Hosahally Nanjegowda, Vinay / Patel, Rituraj / Mahimaluru, Jagadeesh / Biligiri, Krishna Prapoorna	Synthesis and characterization of zeolite-like additive: An eco-efficient asphalt mix production strategy	120898
Pagliaro, Francesco / Lotti, Paolo / Battiston, Tommaso / Comboni, Davide / Gatta, G. Diego / Cámara, Fernando / Milani, Sula / Merlini, Marco / Glazyrin, Konstantin / Liermann, Hanns-Peter	Thermal and compressional behavior of the natural borate kurnakovite, MgB3O3(OH)5·5H2O	121094
Johra, Hicham / Margheritini, Lucia / Antonov, Yovko Ivanov / Meyer Frandsen, Kirstine / Enggrob Simonsen, Morten / Møldrup, Per / Jensen, Rasmus Lund	Thermal, moisture and mechanical properties of Seacrete: A sustainable sea-grown building material	121025
Xu, Yading / Schlangen, Erik / Luković, Mladena / Savija, Branko	Tunable mechanical behavior of auxetic cementitious cellular composites (CCCs): Experiments and simulations	121388
Zhang, Shipeng / Ghouleh, Zaid / He, Zhen / Hu, Lingling / Shao, Yixin	Use of municipal solid waste incineration bottom ash as a supplementary cementitious material in dry-cast concrete	120890
Liu, Dongsheng / Quan, Xin / Zhou, Lixin / Huang, Qian / Wang, Chaoqiang	Utilization of waste concrete powder with different particle size as absorbents for SO2 reduction	121005
Turk, Kazim / Bassurucu, Mahmut / Bitkin, Rifat Enes	Workability, strength and flexural toughness properties of hybrid steel fiber reinforced SCC with high-volume fiber	120944

Informations
sur cette fiche
IssueID
37635
Publié(e) le:
04.10.2020
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - janvier 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - janvier 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.