Construction and Building Materials - November 2020

Published:	November 2020

Articles in this Issue

Author(s)	Title	Page(s)
Zaumanis, M. / Arraigada, M. / Poulikakos, L. D.	100% recycled high-modulus asphalt concrete mixture design and validation using vehicle simulator	119891
Wang, Y. / Han, J. Q. / Li, C. H.	Acoustic emission and CT investigation on fracture evolution of granite containing two flaws subjected to freeze–thaw and cyclic uniaxial increasing-amplitude loading conditions	119769
Aboulayt, Abdelilah / Souayfan, Faten / Roziere, Emmanuel / Jaafri, Reda / Cherki El Idrissi, Anass / Moussa, Redouane / Justino, Christophe / Loukili, Ahmed	Alkali-activated grouts based on slag-fly ash mixtures: From early-age characterization to long-term phase composition	120510
Li, Zhiping / Lu, Dagang / Gao, Xiaojian	Analysis of correlation between hydration heat release and compressive strength for blended cement pastes	120436
Jakubovskis, Ronaldas / Jankutė, Augusta / Urbonavičius, Jaunius / Gribniak, Viktor	Analysis of mechanical performance and durability of self-healing biological concrete	119822
Li, Wenchen / Guo, Lijie / Liu, Guangsheng / Pan, Andrew / Zhang, Tingting	Analytical and experimental investigation of the relationship between spread and yield stress in the mini-cone test for cemented tailings backfill	119770
Qiu, Liangsheng / Dong, Sufen / Ashour, Ashraf / Han, Baoguo	Antimicrobial concrete for smart and durable infrastructures: A review	120456
Zhang, Zhuwu / Ni, Xin / Cheng, Y. Frank	Assessment by finite element modelling of the mechano-electrochemical interaction at double-ellipsoidal corrosion defect with varied inclinations on pipelines	120459
Barbero-Barrera, M. Mar / Jové-Sandoval, Félix / González Iglesias, Sonia	Assessment of the effect of natural hydraulic lime on the stabilisation of compressed earth blocks	119877
Zhou, Jiajia / Pan, Jinlong / Ma, Hongyan / Zhao, Jun / Li, Zongjin	Behavior of high-performance concrete under multiaxial tensile-compressive loading	119887
Andersons, J. / Kirpluks, M. / Cabulis, P. / Kalnins, K. / Cabulis, U.	Bio-based rigid high-density polyurethane foams as a structural thermal break material	120471
Gao, Danying / Huang, Yunchao / Chen, Gang / Yang, Lin	Bond stress distribution analysis between steel bar and steel fiber reinforced concrete using midpoint stress interpolation method	119866
Qasem, Altayeb / Sallam, Yassin S. / Hossam Eldien, Hany / Ahangarn, Beta H.	Bond-slip behavior between ultra-high-performance concrete and carbon fiber reinforced polymer bars using a pull-out test and numerical modelling	119857
Wang, Mingzhi / Liu, Yushi / Qi, Beimeng / Li, Dong / Wang, Wei	BSE-based dispersion quantification of carbon fibres in cementitious composite through FCM-CA approach	119789
Svensson, K. / Neumann, A. / Feitosa Menezes, F. / Lempp, C. / Pöllmann, H.	Carbonation of CEM III mortar – Influence of impure CO2 (with SO2 and NO2) and chloride rich brine	119831
Jiang, Zhenliang / Hu, Changbin / Liu, Ming / Easa, Said M. / Zheng, Xiaoyan	Characteristics of morphology and tensile strength of asphalt mixtures under impact loading using split Hopkinson pressure bar	120443
Sun, Renjuan / Hu, Xinlei / Ling, Yifeng / Zuo, Zhiwu / Zhuang, Peizhi / Wang, Fei	Chloride diffusion behavior of engineered cementitious composite under dry-wet cycles	119943
Razali, Mohd Najib / Mohd Ramli, Najmuddin / Mohd Zuhan, Khairul Nizam / Musa, Musfafikri / Hamid Nour, Abdurahman	Coating and insulation effect using emulsified modification bitumen	119764
Liu, Yanhua / Zeng, Lei / Xiang, Sheng / Mo, Jinxu / Zhang, Jicheng / Chen, Juan / Cheng, Guoyuan	Compressive performance evaluation of concrete confined by stirrups at elevated temperature using DIC technology	119883
Ghahri Saremi, Setare / Goulias, Dimitrios	Concrete strength gain monitoring with non-destructive methods for potential adoption in quality assurance	120464
Zhang, Hong / Anupam, Kumar / Scarpas, Tom / Kasbergen, Cor / Erkens, Sandra / Al Khateeb, Loay	Continuum-based micromechanical models for asphalt materials: Current practices & beyond	119675
Wang, Lan / Shan, Mingyu / Li, Chao	The cracking characteristics of the polymer-modified asphalt mixture before and after aging based on the digital image correlation technology	119802
Yun, Chin Mei / Rahman, Md Rezaur / Phing, Cherlene Yong Wee / Chie, Anita Wong May / Bakri, Muhammad Khusairy Bin	The curing times effect on the strength of ground granulated blast furnace slag (GGBFS) mortar	120622
de la Rosa, Ángel / Poveda, Elisa / Ruiz, Gonzalo / Moreno, Rodrigo / Cifuentes, Héctor / Garijo, Lucía	Determination of the plastic viscosity of superplasticized cement pastes through capillary viscometers	119715
Tugrul Tunc, Esra / Alyamaç, Kürşat Esat	Determination of the relationship between the Los Angeles abrasion values of aggregates and concrete strength using the Response Surface Methodology	119850
Chen, Zihao / Zhang, Henglong / Duan, Haihui / Wu, Chaofan	Determination of time-temperature superposition relationship of SBS modified asphalt based on special rheological phenomenon caused by SBS-formed structure in asphalt matrix	119835
Liang, Jia / Gu, Xingyu	Development and application of a non-destructive pavement testing system based on linear structured light three-dimensional measurement	119919
Mu, Ke / Chen, Jianbing / Mu, Qingyi / Garg, Ankit / Gao, Zhiwei / Li, Yanwei	Development of a microstructure-based numerical approach for analyzing heat transfer within the asphalt mixture	119890
Youssf, Osama / Mills, Julie E. / Benn, Tom / Zhuge, Yan / Ma, Xing / Roychand, Rajeev / Gravina, Rebecca	Development of Crumb Rubber Concrete for Practical Application in the Residential Construction Sector – Design and Processing	119813
Lv, Songtao / Hu, Long / Xia, Chengdong / Wang, XiaoFeng / Borges Cabrera, Milkos / Guo, Shuaicheng / Chen, Jie	Development of fatigue damage model of asphalt mixtures based on small-scale accelerated pavement test	119930
Shakouri, Sahra / Bayer, Özgür / Erdoğan, Sinan T.	Development of silica fume-based geopolymer foams	120442
Yuan, Qiang / Zuo, Shenghao / Deng, Dehua	Early-age deformation of cement emulsified asphalt mortar with aluminum powder and expansive agent	120484
Zhang, Zhaocai / Zhu, Yu / Ba, Hengjing	Eco-friendly anticorrosion for carbon steel in artificial seawater: Effect of the ethylene oxide number of polyoxyethylene lauryl ether on its inhibition behaviour combining experimental and theoretical perspectives	119905
Jiang, Jiwang / Zhao, Yanjing / Lu, Guoyang / Dai, Yingqi / Ni, Fujian / Dong, Qiao	Effect of binder film distribution on the fatigue characteristics of asphalt Binder/Filler composite based on image analysis method	119876
Ma, Zhongcheng / Yao, Yan / Liu, Zhicheng / Wu, Biao / Wen, Zhaijun	Effect of calcination and cooling conditions on mineral compositions and properties of high-magnesia and low-heat Portland cement clinker	119907
Gao, Fangfang / Tian, Wei / Wang, Zhen / Wang, Feng	Effect of diameter of multi-walled carbon nanotubes on mechanical properties and microstructure of the cement-based materials	120452
Gong, Ke / Wu, Ming / Xie, Fei / Liu, Guangxin / Sun, Dongxu	Effect of dry/wet ratio and pH on the stress corrosion cracking behavior of rusted X100 steel in an alternating dry/wet environment	120478
Li-Ping, Guo / Miao, Wang / Cong, Ding / Li-Juan, Chai	Effect of incorporating reclaimed asphalt pavement on macroscopic and microstructural properties of high ductility cementitious composites	119956
Liu, Zuoqiang / Zhang, Haitao / Gong, Mingyang / Yu, Lize	Effect of inherent anisotropy on transverse permeability of porous functional asphalt mixtures	119957
Hong, Haokai / Zhang, Henglong / Zhang, Shuai	Effect of multi-dimensional nanomaterials on the aging behavior of asphalt by atomic force microscope	120389
Shen, Jianhua / Xu, Dongsheng / Liu, Zhuowen / Wei, Houzhen	Effect of particle characteristics stress on the mechanical properties of cement mortar with coral sand	119836
Heidarnezhad, Fatemeh / Jafari, Khashayar / Ozbakkaloglu, Togay	Effect of polymer content and temperature on mechanical properties of lightweight polymer concrete	119853
Niu, Xu-Jing / Li, Qing-bin / Liu, Wei-Jia / Hu, Yu	Effects of ambient temperature, relative humidity and wind speed on interlayer properties of dam concrete	119791
Pan, Chonggen / Chen, Na / He, Jingzi / Liu, Shuhua / Chen, Keyu / Wang, Penggang / Xu, Peizhen	Effects of corrosion inhibitor and functional components on the electrochemical and mechanical properties of concrete subject to chloride environment	119724
Rahman, Md Nafiur / Sarkar, Md Tanvir Ahmed / Elseifi, Mostafa A. / Mayeux, Corey / Cooper, Samuel B.	Effects of emulsion types, application rates, and crumb rubber on the laboratory performance of chip seal	119787
Zhang, Weifeng / Gu, Xiaowei / Qiu, Jingping / Liu, Jianping / Zhao, Yunqi / Li, Xiaohui	Effects of iron ore tailings on the compressive strength and permeability of ultra-high performance concrete	119917
Liu, Yu / Huang, Lei / Li, Mengyuan / Yan, Peiyu	The effects of sodium citrate on compressive strength and paste microstructure of self-compacting concrete	120467
Dehghanpour, Heydar / Yilmaz, Kemalettin / Afshari, Faraz / Ipek, Metin	Electrically conductive concrete: A laboratory-based investigation and numerical analysis approach	119948
Wanasinghe, Dimuthu / Aslani, Farhad / Ma, Guowei	Electromagnetic shielding properties of carbon fibre reinforced cementitious composites	120439
Chernyshova, Natalia / Lesovik, Valery / Fediuk, Roman / Timokhin, Roman	Enhancement of fresh properties and performances of the eco-friendly gypsum-cement composite (EGCC)	120462
Bajaj, Akash / Martin, Amy Epps / King, Gayle / Glover, Charles / Kaseer, Fawaz / Arámbula-Mercado, Edith	Evaluation and classification of recycling agents for asphalt binders	119864
Abedi, Mohammadmahdi / Fangueiro, Raúl / Camões, Aires / Correia, António Gomes	Evaluation of CNT/GNP’s synergic effects on the Mechanical, Microstructural, and durability properties of a cementitious composite by the novel dispersion method	120486
Labib, Wafa Abdelmajeed	Evaluation of hybrid fibre-reinforced concrete slabs in terms of punching shear	119763
Zhao, Kui / Yang, Daoxue / Gong, Cong / Zhuo, Yulong / Wang, Xiaojun / Zhong, Wen	Evaluation of internal microcrack evolution in red sandstone based on time–frequency domain characteristics of acoustic emission signals	120435
Lima, Mayara S. S. / Padilha Thives, Liseane	Evaluation of red mud as filler in Brazilian dense graded asphalt mixtures	119894
Liu, Leping / Xie, Maojia / He, Yan / Li, Yuanyuan / Huang, Xiaoqing / Cui, Xuemin / Shi, Caijun	Expansion behavior and microstructure change of alkali-activated slag grouting material in sulfate environment	119909
Yu, Jiangjiang / Zhang, Boshan / Chen, Weizhen / He, Jiayuan	Experimental and multi-scale numerical investigation of ultra-high performance fiber reinforced concrete (UHPFRC) with different coarse aggregate content and fiber volume fraction	120444
Liu, Chao / Pan, Liufeng / Liu, Hai / Tong, Huawei / Yang, Yubing / Chen, Wei	Experimental and numerical investigation on mechanical properties of grouted-sleeve splices	120441
Zare, Pouria / Narani, Shayan Sheikhi / Abbaspour, Mohsen / Fahimifar, Ahmad / Mir Mohammad Hosseini, Seyed Majdeddin / Zare, Pariya	Experimental investigation of non-stabilized and cement-stabilized rammed earth reinforcement by Waste Tire Textile Fibers (WTTFs)	120432
Pipintakos, Georgios / Vincent Ching, H. Y. / Soenen, Hilde / Sjövall, Peter / Mühlich, Uwe / Van Doorslaer, Sabine / Varveri, Aikaterini / van den bergh, Wim / Lu, Xiaohu	Experimental investigation of the oxidative ageing mechanisms in bitumen	119702
Du, Hongxiu / Zhang, Maolin	Experimental investigation of thermal pore pressure in reinforced C80 high performance concrete slabs at elevated temperatures	120451
Teng, Fei / Qiu, Wen-Liang / Pan, Sheng-Shan / Hu, Ha-si	Experimental study on seismic performance of precast segmental concrete columns after seawater freeze-thaw cycles	120482
Guo, Yong-Chang / Xiao, Shu-Hua / Zeng, Jun-Jie / Zheng, Yu / Li, Xiang / Liu, Feng	Fiber reinforced polymer-confined concrete under high strain rate compression: Behavior and a unified dynamic strength model	120460
Yuan, Yuan / Zhou, Yifei / Liu, Wenbai / Chen, Jubing	Flexural deformation characterization of glass panel in curtain walls based on digital image correlation technique	119819
Nawaz, Mohsin / Heitor, Ana / Sivakumar, Muttucumaru	Geopolymers in construction - recent developments	120472
Nwankwo, Chinyere O. / Bamigboye, Gideon O. / Davies, Iyinoluwa E. E. / Michaels, Temitope A.	High volume Portland cement replacement: A review	120445
Imanian Ghazanlou, Siamak / Jalaly, Maisam / Sadeghzadeh, Sadegh / Habibnejad korayem, Asghar	High-performance cement containing nanosized Fe3O4–decorated graphene oxide	120454
Miura, Taito / Nakamura, Hikaru / Yamamoto, Yoshihito	Impact of origination of expansion on three-dimensional expansion crack propagation process due to DEF evaluated by mesoscale discrete model	119911
Jimenez-Vicaria, J. David / Pulido, M. Dolores G. / Castro-Fresno, Daniel	Influence of carbon fibre stiffness and adhesive ductility on CFRP-steel adhesive joints with short bond lengths	119758
Li, Biyun / Sun, Zhenping / Hu, Kuangyi / Yang, Jingbin	Influence of carbonation on the volume change of hardened cement pastes	119709
Kandasamy, S. / Kothandaraman, S.	Influence of controlled permeable formwork liner on surface quality of self compacting concrete	119756
Zhang, Wenhua / Pi, Yilin / Kong, Weipeng / Zhang, Yunsheng / Wu, Peipei / Zeng, Weizhao / Yang, Fenghao	Influence of damage degree on the degradation of concrete under freezing-thawing cycles	119903
Zayed, A. M. / Masoud, M. A. / Rashad, Alaa M. / El-Khayatt, A. M. / Sakr, K. / Kansouh, W. A. / Shahien, M. G.	Influence of heavyweight aggregates on the physico-mechanical and radiation attenuation properties of serpentine-based concrete	120473
Du, Yuhang / Yang, Jian / Thomas, Blessen Skariah / Li, Lihui / Li, Huanyu / Shaban, Wafaa Mohamed / Tung Chong, Wai	Influence of hybrid graphene oxide/carbon nanotubes on the mechanical properties and microstructure of magnesium potassium phosphate cement paste	120449
Li, Haoxin / Ni, Dayou / Li, Lin / Dong, Biqin / Chen, Qing / Gu, Linan	Insight into the role of polyacrylamide polymer powder on the cracking in plastic period of cement mortar	119914
Huang, Yimiao / Zhang, Junfei / Tze Ann, Foo / Ma, Guowei	Intelligent mixture design of steel fibre reinforced concrete using a support vector regression and firefly algorithm based multi-objective optimization model	120457
Zare, Yasser / Yop Rhee, Kyong	Interfacial factors affecting the strengthening efficacy of nanoclay in nanocomposites	119868
Tian, Yaogang / Yan, Xiaohui / zhang, Mengyuan / Lu, Dong / Yang, Tingting / Wang, Zhenjun / Li, Weiguang	Internal transport and corrosion behaviors of sulfate corrosion media carried by recycled aggregate in concrete	120480
Li, Shuan / Wang, Xiaowei / Ji, Xiaoping / Li, Jingyao / Li, Kang / Shi, Jikai	Investigating the rutting mechanism of asphalt mixtures based on particle tracking technology	119781
Sarıdemir, Mustafa / Çelikten, Serhat	Investigation of fire and chemical effects on the properties of alkali-activated lightweight concretes produced with basaltic pumice aggregate	119969
Ma, Guibao / Li, Hui / Yang, Bing / Zhang, Hengji / Li, Weichao	Investigation on the deformation behavior of open-graded unbound granular materials for permeable pavement	119800
Zhang, Hongliang / Su, Ci / Bu, Xinde / Zhang, Yongping / Gao, Yang / Huang, Man	Laboratory investigation on the properties of polyurethane/unsaturated polyester resin modified bituminous mixture	119865
Sokairge, Hesham / Elgabbas, Fareed / Rashad, Ahmed / Elshafie, Hany	Long-term creep behavior of basalt fiber reinforced polymer bars	120437
Ben Chaabene, Wassim / Flah, Majdi / Nehdi, Moncef L.	Machine learning prediction of mechanical properties of concrete: Critical review	119889
Yu, Miao / You, Zhanping / Wu, Guoxiong / Kong, Lingyun / Liu, Chaochao / Gao, Junfeng	Measurement and modeling of skid resistance of asphalt pavement: A review	119878
Yang, Fan / Qian, Shunzhi	Mechanical and piezoelectric properties of ECC with CNT incorporated through fiber modification	119717
Chen, Aijiu / Han, Xiaoyan / Chen, Meng / Wang, Xiaoyu / Wang, Zhihao / Guo, Tengteng	Mechanical and stress-strain behavior of basalt fiber reinforced rubberized recycled coarse aggregate concrete	119888
Zhang, Chunmei / Cai, Jingxuan / Xu, Hao / Cheng, Xiaowei / Guo, Xiaoyang	Mechanical properties and mechanism of wollastonite fibers reinforced oil well cement	120461
Wu, Bo / Yang, Yang / Zhang, Liangliang / Wang, Yuanchao / Li, Haohong	Meso-scale numerical study on the non-uniform corrosion-induced cracking of confined concrete	120463
Zhu, Hongbo / Gou, Hongxiang / Zhou, Haiyun / Jiang, Zhengwu	Microscopic analysis of nano-modified fly ash by fluidized bed reactor-vapor deposition	120434
Shekhawat, Poonam / Sharma, Gunwant / Singh, Rao Martand	Microstructural and morphological development of eggshell powder and flyash-based geopolymers	119886
Hasan, Md Mehedi / Tarefder, Rafiqul A.	A mixture design approach for mitigating cracking issue of asphalt concrete pavement	119861
Liao, Kai-Xing / Zhang, Yun-Peng / Zhang, Wei-Ping / Wang, Ying / Zhang, Rong-Ling	Modeling constitutive relationship of sulfate-attacked concrete	119902
Yan, Luke / Li, Mengru / Li, Qian / Li, Huayi	Modified asphalt based on polyethylene with broad molecular weight distribution	119707
Zagorodnyuk, Lilia / Sumskoy, Dmitry / Lesovik, Valery / Fediuk, Roman	Modified heat-insulating binder using jet-grinded waste of expanded perlite sand	120440
Wang, Pan / Qiao, Gang / Guo, Yupeng / Zhang, Yue / Hou, Dongshuai / Jin, Zuquan / Zhang, Jinrui / Wang, Muhan / Hu, Xiaoxia	Molecular dynamics simulation of the interfacial bonding properties between graphene oxide and calcium silicate hydrate	119927
Li, Hao-Dao / Zhang, Qi-ming / Feng, Ganlin / Mei, Liu / Wang, Yaocheng / Long, Wu-Jian	Multi-scale improved damping of high-volume fly ash cementitious composite: Combined effects of polyvinyl alcohol fiber and graphene oxide	119901
El Hachem, Chady / Abahri, Kamilia / Leclerc, Sebastien / Bennacer, Rachid	NMR and XRD quantification of bound and free water interaction of spruce wood fibers	120470
Liu, Qingyang / Song, Zijian / Han, Han / Donkor, Saddick / Jiang, Linhua / Wang, Wanyi / Chu, Hongqiang	A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves	119695
Pooni, J. / Robert, D. / Giustozzi, F. / Setunge, S. / Xie, Y. M. / Xia, J.	Novel use of calcium sulfoaluminate (CSA) cement for treating problematic soils	120433
Driely Morsch Vidal, Carla / Vargas Vaucher Bandeira, Matthews / Rebolledo La Torre, Kevin / Kosteski, Luis Eduardo / Marangon, Ederli	Numerical and experimental evaluation of the anisotropic behavior and boundary condition of a structural concrete	119858
Dong, Zhifang / Deng, Mingke / Zhang, Yangxi / Zhang, Cong / Ma, Ping	Out-of-plane strengthening of unreinforced masonry walls using textile reinforced mortar added short polyvinyl alcohol fibers	119910
Joseph, Aneeta Mary / Snellings, Ruben / Nielsen, Peter / Matthys, Stijn / De Belie, Nele	Pre-treatment and utilisation of municipal solid waste incineration bottom ashes towards a circular economy	120485
Nguyen-Sy, Tuan / Wakim, Jad / To, Quy-Dong / Vu, Minh-Ngoc / Nguyen, The-Duong / Nguyen, Thoi-Trung	Predicting the compressive strength of concrete from its compositions and age using the extreme gradient boosting method	119757
Barugahare, Javilla / Amirkhanian, Armen N. / Xiao, Feipeng / Amirkhanian, Serji N.	Predicting the dynamic modulus of hot mix asphalt mixtures using bagged trees ensemble	120468
Rasul, Mehboob / Hosoda, Akira / Maekawa, Koichi	Prediction of maximum thermal crack width of RC abutments utilizing actual construction data and study on influential parameters using neural networks	120477
Ma, Yangbao / Lv, Shanshan / Yao, Xiaorui / Zhang, Yanhua / Gu, Jiyou	Preparation of isocyanate microcapsules as a high-performance adhesive for PLA/WF	120483
Heikal, Mohamed / Zaki, M. E. A. / Ibrahim, Sahar M.	Preparation, physico-mechanical characteristics and durability of eco-alkali-activated binder from blast-furnace slag, cement kiln-by-pass dust and microsilica ternary system	119947
Laanaiya, M. / Zaoui, A.	Preventing cement-based materials failure by embedding Fe2O3 nanoparticles	120466
Boccarusso, Luca / Durante, Massimo / Iucolano, Fabio / Mocerino, Davide / Langella, Antonio	Production of hemp-gypsum composites with enhanced flexural and impact resistance	120476
Zhang, Jian / Li, Shucai / Li, Zhaofeng / Liu, Chao / Gao, Yifan / Qi, Yanhai	Properties of red mud blended with magnesium phosphate cement paste: Feasibility of grouting material preparation	119704
Kim, Min-Jun / Kim, Hyeong-Gook / Lee, Yong-Jun / Kim, Dong-Hwan / Lee, Jung-Yoon / Kim, Kil-Hee	Pure torsional behavior of RC beams in relation to the amount of torsional reinforcement and cross-sectional properties	119801
Coletti, Chiara / Brattich, Erika / Cinelli, Giorgia / Cultrone, Giuseppe / Maritan, Lara / Mazzoli, Claudio / Mostacci, Domiziano / Tositti, Laura / Sassi, Raffaele	Radionuclide concentration and radon exhalation in new mix design of bricks produced reusing NORM by-products: The influence of mineralogy and texture	119820
Maierdan, Yierfan / Aminul Haque, M. / Chen, Bing / Maimaitiyiming, Muhetaer / Ahmad, Muhammad Riaz	Recycling of waste river sludge into unfired green bricks stabilized by a combination of phosphogypsum, slag, and cement	120666
Berger, F. / Gauvin, F. / Brouwers, H. J. H.	The recycling potential of wood waste into wood-wool/cement composite	119786
Ford, Emily L. / Hoover, Christian G. / Mobasher, Barzin / Neithalath, Narayanan	Relating the nano-mechanical response and qualitative chemical maps of multi-component ultra-high performance cementitious binders	119959
Aluko, Oluwatobi Gbenga / Yatim, Jamaludin Mohamad / Kadir, Mariyana Aida Ab. / Yahya, Khairuzan	A review of properties of bio-fibrous concrete exposed to elevated temperatures	119671
Xue, Junqing / Briseghella, Bruno / Huang, Fuyun / Nuti, Camillo / Tabatabai, Habib / Chen, Baochun	Review of ultra-high performance concrete and its application in bridge engineering	119844
Elahi, Md Manjur A. / Hossain, Md. Maruf / Karim, Md Rezaul / Zain, Muhammad Fauzi Mohd / Shearer, Christopher	A review on alkali-activated binders: Materials composition and fresh properties of concrete	119788
Yoon, Jinyoung / Kim, Hyunjun / Shin, Sung Woo / Sim, Sung-Han	Rheology-based determination of injectable grout fluidity for preplaced aggregate concrete using ultrasonic tomography	120447
Aminul Haque, M. / Chen, Bing / Liu, Yuantao	The role of bauxite and fly-ash on the water stability and microstructural densification of magnesium phosphate cement composites	119953
Li, Ting / Su, Qian / Kaewunruen, Sakdirat	Seismic metamaterial barriers for ground vibration mitigation in railways considering the train-track-soil dynamic interactions	119936
Xue, Caihong / Li, Wengui / Qu, Fulin / Sun, Zhihui / Shah, Surendra P.	Self-healing efficiency and crack closure of smart cementitious composite with crystalline admixture and structural polyurethane	119955
Zhang, Rui / Hu, Peng / Zheng, Xiaohang / Cai, Lianheng / Guo, Rui / Wei, Dingbang	Shear behavior of RC slender beams without stirrups by using precast U-shaped ECC permanent formwork	120430
Zhang, Kai / Zhang, Jun / Jin, Weiliang / Mao, Jianghong / Long, Jiangxing	Stiffness degradation for fatigue of reinforced concrete beams after electrochemical rehabilitation	120455
Lagos-Varas, M. / Raposeiras, A. C. / Movilla-Quesada, D. / Arenas, J. P. / Castro-Fresno, D. / Muñoz-Cáceres, O. / Andres-Valeri, V. C.	Study of the permanent deformation of binders and asphalt mixtures using rheological models of fractional viscoelasticity	120438
Chen, Ying / Liu, Peng / Yu, Zhiwu	Study on degradation of macro performances and micro structure of concrete attacked by sulfate under artificial simulated environment	119951
Zhang, Yan / Chen, Da / Liang, Yunchao / Qu, Kaicheng / Lu, Kehua / Chen, Shijia / Kong, Mengjie	Study on engineering properties of foam concrete containing waste seashell	119896
Li, Bin / Sun, Guoqiang / Sun, Daquan / Lu, Tong / Ma, Jianmin / Deng, Yue	Survival and activation behavior of microcapsules in self-healing asphalt mixture	119719
Meybodian, Hadi / Eslami, Abolfazl / Morshed, Reza	Sustainable lateral strengthening of traditional adobe walls using natural reinforcements	119892
Dong, Zhifang / Deng, Mingke / Zhang, Cong / Zhang, Yangxi / Sun, Hongzhe	Tensile behavior of glass textile reinforced mortar (TRM) added with short PVA fibers	119897
Zhang, Zhongya / Zhou, Jianting / Yang, Jun / Zou, Yang / Wang, Zongshan	Understanding of the deterioration characteristic of concrete exposed to external sulfate attack: Insight into mesoscopic pore structures	119932
Li, Wanzhao / Chen, Chaoyi / Shi, Jiangtao / Mei, Changtong / Kibleur, Pierre / Van Acker, Joris / van den Bulcke, Jan	Understanding the mechanical performance of OSB in compression tests	119837
Li, Qinglin / Wei, Haibin / Zhang, Yangpeng / Han, Leilei / Han, Shanye / Ding, Ning	The variations on thermal conductivity and structures of silty clay modified by waste fly ash and oil shale ash after freeze–thaw cycles	119954
Gong, Wei / Wang, Nan / Zhang, Na / Han, Wenliang / Qiao, Hongxia	Water resistance and a comprehensive evaluation model of magnesium oxychloride cement concrete based on Taguchi and entropy weight method	119817
Hung, Chung-Chan / Chen, Yueh-Ting / Yen, Cheng-Hao	Workability, fiber distribution, and mechanical properties of UHPC with hooked end steel macro-fibers	119944

About this
data sheet
IssueID
37299
Published on:
12/07/2020
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.