Construction and Building Materials - novembre 2020

Publié:	novembre 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zaumanis, M. / Arraigada, M. / Poulikakos, L. D.	100% recycled high-modulus asphalt concrete mixture design and validation using vehicle simulator	119891
Wang, Y. / Han, J. Q. / Li, C. H.	Acoustic emission and CT investigation on fracture evolution of granite containing two flaws subjected to freeze–thaw and cyclic uniaxial increasing-amplitude loading conditions	119769
Aboulayt, Abdelilah / Souayfan, Faten / Roziere, Emmanuel / Jaafri, Reda / Cherki El Idrissi, Anass / Moussa, Redouane / Justino, Christophe / Loukili, Ahmed	Alkali-activated grouts based on slag-fly ash mixtures: From early-age characterization to long-term phase composition	120510
Li, Zhiping / Lu, Dagang / Gao, Xiaojian	Analysis of correlation between hydration heat release and compressive strength for blended cement pastes	120436
Jakubovskis, Ronaldas / Jankutė, Augusta / Urbonavičius, Jaunius / Gribniak, Viktor	Analysis of mechanical performance and durability of self-healing biological concrete	119822
Li, Wenchen / Guo, Lijie / Liu, Guangsheng / Pan, Andrew / Zhang, Tingting	Analytical and experimental investigation of the relationship between spread and yield stress in the mini-cone test for cemented tailings backfill	119770
Qiu, Liangsheng / Dong, Sufen / Ashour, Ashraf / Han, Baoguo	Antimicrobial concrete for smart and durable infrastructures: A review	120456
Zhang, Zhuwu / Ni, Xin / Cheng, Y. Frank	Assessment by finite element modelling of the mechano-electrochemical interaction at double-ellipsoidal corrosion defect with varied inclinations on pipelines	120459
Barbero-Barrera, M. Mar / Jové-Sandoval, Félix / González Iglesias, Sonia	Assessment of the effect of natural hydraulic lime on the stabilisation of compressed earth blocks	119877
Zhou, Jiajia / Pan, Jinlong / Ma, Hongyan / Zhao, Jun / Li, Zongjin	Behavior of high-performance concrete under multiaxial tensile-compressive loading	119887
Andersons, J. / Kirpluks, M. / Cabulis, P. / Kalnins, K. / Cabulis, U.	Bio-based rigid high-density polyurethane foams as a structural thermal break material	120471
Gao, Danying / Huang, Yunchao / Chen, Gang / Yang, Lin	Bond stress distribution analysis between steel bar and steel fiber reinforced concrete using midpoint stress interpolation method	119866
Qasem, Altayeb / Sallam, Yassin S. / Hossam Eldien, Hany / Ahangarn, Beta H.	Bond-slip behavior between ultra-high-performance concrete and carbon fiber reinforced polymer bars using a pull-out test and numerical modelling	119857
Wang, Mingzhi / Liu, Yushi / Qi, Beimeng / Li, Dong / Wang, Wei	BSE-based dispersion quantification of carbon fibres in cementitious composite through FCM-CA approach	119789
Svensson, K. / Neumann, A. / Feitosa Menezes, F. / Lempp, C. / Pöllmann, H.	Carbonation of CEM III mortar – Influence of impure CO2 (with SO2 and NO2) and chloride rich brine	119831
Jiang, Zhenliang / Hu, Changbin / Liu, Ming / Easa, Said M. / Zheng, Xiaoyan	Characteristics of morphology and tensile strength of asphalt mixtures under impact loading using split Hopkinson pressure bar	120443
Sun, Renjuan / Hu, Xinlei / Ling, Yifeng / Zuo, Zhiwu / Zhuang, Peizhi / Wang, Fei	Chloride diffusion behavior of engineered cementitious composite under dry-wet cycles	119943
Razali, Mohd Najib / Mohd Ramli, Najmuddin / Mohd Zuhan, Khairul Nizam / Musa, Musfafikri / Hamid Nour, Abdurahman	Coating and insulation effect using emulsified modification bitumen	119764
Liu, Yanhua / Zeng, Lei / Xiang, Sheng / Mo, Jinxu / Zhang, Jicheng / Chen, Juan / Cheng, Guoyuan	Compressive performance evaluation of concrete confined by stirrups at elevated temperature using DIC technology	119883
Ghahri Saremi, Setare / Goulias, Dimitrios	Concrete strength gain monitoring with non-destructive methods for potential adoption in quality assurance	120464
Zhang, Hong / Anupam, Kumar / Scarpas, Tom / Kasbergen, Cor / Erkens, Sandra / Al Khateeb, Loay	Continuum-based micromechanical models for asphalt materials: Current practices & beyond	119675
Wang, Lan / Shan, Mingyu / Li, Chao	The cracking characteristics of the polymer-modified asphalt mixture before and after aging based on the digital image correlation technology	119802
Yun, Chin Mei / Rahman, Md Rezaur / Phing, Cherlene Yong Wee / Chie, Anita Wong May / Bakri, Muhammad Khusairy Bin	The curing times effect on the strength of ground granulated blast furnace slag (GGBFS) mortar	120622
de la Rosa, Ángel / Poveda, Elisa / Ruiz, Gonzalo / Moreno, Rodrigo / Cifuentes, Héctor / Garijo, Lucía	Determination of the plastic viscosity of superplasticized cement pastes through capillary viscometers	119715
Tugrul Tunc, Esra / Alyamaç, Kürşat Esat	Determination of the relationship between the Los Angeles abrasion values of aggregates and concrete strength using the Response Surface Methodology	119850
Chen, Zihao / Zhang, Henglong / Duan, Haihui / Wu, Chaofan	Determination of time-temperature superposition relationship of SBS modified asphalt based on special rheological phenomenon caused by SBS-formed structure in asphalt matrix	119835
Liang, Jia / Gu, Xingyu	Development and application of a non-destructive pavement testing system based on linear structured light three-dimensional measurement	119919
Mu, Ke / Chen, Jianbing / Mu, Qingyi / Garg, Ankit / Gao, Zhiwei / Li, Yanwei	Development of a microstructure-based numerical approach for analyzing heat transfer within the asphalt mixture	119890
Youssf, Osama / Mills, Julie E. / Benn, Tom / Zhuge, Yan / Ma, Xing / Roychand, Rajeev / Gravina, Rebecca	Development of Crumb Rubber Concrete for Practical Application in the Residential Construction Sector – Design and Processing	119813
Lv, Songtao / Hu, Long / Xia, Chengdong / Wang, XiaoFeng / Borges Cabrera, Milkos / Guo, Shuaicheng / Chen, Jie	Development of fatigue damage model of asphalt mixtures based on small-scale accelerated pavement test	119930
Shakouri, Sahra / Bayer, Özgür / Erdoğan, Sinan T.	Development of silica fume-based geopolymer foams	120442
Yuan, Qiang / Zuo, Shenghao / Deng, Dehua	Early-age deformation of cement emulsified asphalt mortar with aluminum powder and expansive agent	120484
Zhang, Zhaocai / Zhu, Yu / Ba, Hengjing	Eco-friendly anticorrosion for carbon steel in artificial seawater: Effect of the ethylene oxide number of polyoxyethylene lauryl ether on its inhibition behaviour combining experimental and theoretical perspectives	119905
Jiang, Jiwang / Zhao, Yanjing / Lu, Guoyang / Dai, Yingqi / Ni, Fujian / Dong, Qiao	Effect of binder film distribution on the fatigue characteristics of asphalt Binder/Filler composite based on image analysis method	119876
Ma, Zhongcheng / Yao, Yan / Liu, Zhicheng / Wu, Biao / Wen, Zhaijun	Effect of calcination and cooling conditions on mineral compositions and properties of high-magnesia and low-heat Portland cement clinker	119907
Gao, Fangfang / Tian, Wei / Wang, Zhen / Wang, Feng	Effect of diameter of multi-walled carbon nanotubes on mechanical properties and microstructure of the cement-based materials	120452
Gong, Ke / Wu, Ming / Xie, Fei / Liu, Guangxin / Sun, Dongxu	Effect of dry/wet ratio and pH on the stress corrosion cracking behavior of rusted X100 steel in an alternating dry/wet environment	120478
Li-Ping, Guo / Miao, Wang / Cong, Ding / Li-Juan, Chai	Effect of incorporating reclaimed asphalt pavement on macroscopic and microstructural properties of high ductility cementitious composites	119956
Liu, Zuoqiang / Zhang, Haitao / Gong, Mingyang / Yu, Lize	Effect of inherent anisotropy on transverse permeability of porous functional asphalt mixtures	119957
Hong, Haokai / Zhang, Henglong / Zhang, Shuai	Effect of multi-dimensional nanomaterials on the aging behavior of asphalt by atomic force microscope	120389
Shen, Jianhua / Xu, Dongsheng / Liu, Zhuowen / Wei, Houzhen	Effect of particle characteristics stress on the mechanical properties of cement mortar with coral sand	119836
Heidarnezhad, Fatemeh / Jafari, Khashayar / Ozbakkaloglu, Togay	Effect of polymer content and temperature on mechanical properties of lightweight polymer concrete	119853
Niu, Xu-Jing / Li, Qing-bin / Liu, Wei-Jia / Hu, Yu	Effects of ambient temperature, relative humidity and wind speed on interlayer properties of dam concrete	119791
Pan, Chonggen / Chen, Na / He, Jingzi / Liu, Shuhua / Chen, Keyu / Wang, Penggang / Xu, Peizhen	Effects of corrosion inhibitor and functional components on the electrochemical and mechanical properties of concrete subject to chloride environment	119724
Rahman, Md Nafiur / Sarkar, Md Tanvir Ahmed / Elseifi, Mostafa A. / Mayeux, Corey / Cooper, Samuel B.	Effects of emulsion types, application rates, and crumb rubber on the laboratory performance of chip seal	119787
Zhang, Weifeng / Gu, Xiaowei / Qiu, Jingping / Liu, Jianping / Zhao, Yunqi / Li, Xiaohui	Effects of iron ore tailings on the compressive strength and permeability of ultra-high performance concrete	119917
Liu, Yu / Huang, Lei / Li, Mengyuan / Yan, Peiyu	The effects of sodium citrate on compressive strength and paste microstructure of self-compacting concrete	120467
Dehghanpour, Heydar / Yilmaz, Kemalettin / Afshari, Faraz / Ipek, Metin	Electrically conductive concrete: A laboratory-based investigation and numerical analysis approach	119948
Wanasinghe, Dimuthu / Aslani, Farhad / Ma, Guowei	Electromagnetic shielding properties of carbon fibre reinforced cementitious composites	120439
Chernyshova, Natalia / Lesovik, Valery / Fediuk, Roman / Timokhin, Roman	Enhancement of fresh properties and performances of the eco-friendly gypsum-cement composite (EGCC)	120462
Bajaj, Akash / Martin, Amy Epps / King, Gayle / Glover, Charles / Kaseer, Fawaz / Arámbula-Mercado, Edith	Evaluation and classification of recycling agents for asphalt binders	119864
Abedi, Mohammadmahdi / Fangueiro, Raúl / Camões, Aires / Correia, António Gomes	Evaluation of CNT/GNP’s synergic effects on the Mechanical, Microstructural, and durability properties of a cementitious composite by the novel dispersion method	120486
Labib, Wafa Abdelmajeed	Evaluation of hybrid fibre-reinforced concrete slabs in terms of punching shear	119763
Zhao, Kui / Yang, Daoxue / Gong, Cong / Zhuo, Yulong / Wang, Xiaojun / Zhong, Wen	Evaluation of internal microcrack evolution in red sandstone based on time–frequency domain characteristics of acoustic emission signals	120435
Lima, Mayara S. S. / Padilha Thives, Liseane	Evaluation of red mud as filler in Brazilian dense graded asphalt mixtures	119894
Liu, Leping / Xie, Maojia / He, Yan / Li, Yuanyuan / Huang, Xiaoqing / Cui, Xuemin / Shi, Caijun	Expansion behavior and microstructure change of alkali-activated slag grouting material in sulfate environment	119909
Yu, Jiangjiang / Zhang, Boshan / Chen, Weizhen / He, Jiayuan	Experimental and multi-scale numerical investigation of ultra-high performance fiber reinforced concrete (UHPFRC) with different coarse aggregate content and fiber volume fraction	120444
Liu, Chao / Pan, Liufeng / Liu, Hai / Tong, Huawei / Yang, Yubing / Chen, Wei	Experimental and numerical investigation on mechanical properties of grouted-sleeve splices	120441
Zare, Pouria / Narani, Shayan Sheikhi / Abbaspour, Mohsen / Fahimifar, Ahmad / Mir Mohammad Hosseini, Seyed Majdeddin / Zare, Pariya	Experimental investigation of non-stabilized and cement-stabilized rammed earth reinforcement by Waste Tire Textile Fibers (WTTFs)	120432
Pipintakos, Georgios / Vincent Ching, H. Y. / Soenen, Hilde / Sjövall, Peter / Mühlich, Uwe / Van Doorslaer, Sabine / Varveri, Aikaterini / van den bergh, Wim / Lu, Xiaohu	Experimental investigation of the oxidative ageing mechanisms in bitumen	119702
Du, Hongxiu / Zhang, Maolin	Experimental investigation of thermal pore pressure in reinforced C80 high performance concrete slabs at elevated temperatures	120451
Teng, Fei / Qiu, Wen-Liang / Pan, Sheng-Shan / Hu, Ha-si	Experimental study on seismic performance of precast segmental concrete columns after seawater freeze-thaw cycles	120482
Guo, Yong-Chang / Xiao, Shu-Hua / Zeng, Jun-Jie / Zheng, Yu / Li, Xiang / Liu, Feng	Fiber reinforced polymer-confined concrete under high strain rate compression: Behavior and a unified dynamic strength model	120460
Yuan, Yuan / Zhou, Yifei / Liu, Wenbai / Chen, Jubing	Flexural deformation characterization of glass panel in curtain walls based on digital image correlation technique	119819
Nawaz, Mohsin / Heitor, Ana / Sivakumar, Muttucumaru	Geopolymers in construction - recent developments	120472
Nwankwo, Chinyere O. / Bamigboye, Gideon O. / Davies, Iyinoluwa E. E. / Michaels, Temitope A.	High volume Portland cement replacement: A review	120445
Imanian Ghazanlou, Siamak / Jalaly, Maisam / Sadeghzadeh, Sadegh / Habibnejad korayem, Asghar	High-performance cement containing nanosized Fe3O4–decorated graphene oxide	120454
Miura, Taito / Nakamura, Hikaru / Yamamoto, Yoshihito	Impact of origination of expansion on three-dimensional expansion crack propagation process due to DEF evaluated by mesoscale discrete model	119911
Jimenez-Vicaria, J. David / Pulido, M. Dolores G. / Castro-Fresno, Daniel	Influence of carbon fibre stiffness and adhesive ductility on CFRP-steel adhesive joints with short bond lengths	119758
Li, Biyun / Sun, Zhenping / Hu, Kuangyi / Yang, Jingbin	Influence of carbonation on the volume change of hardened cement pastes	119709
Kandasamy, S. / Kothandaraman, S.	Influence of controlled permeable formwork liner on surface quality of self compacting concrete	119756
Zhang, Wenhua / Pi, Yilin / Kong, Weipeng / Zhang, Yunsheng / Wu, Peipei / Zeng, Weizhao / Yang, Fenghao	Influence of damage degree on the degradation of concrete under freezing-thawing cycles	119903
Zayed, A. M. / Masoud, M. A. / Rashad, Alaa M. / El-Khayatt, A. M. / Sakr, K. / Kansouh, W. A. / Shahien, M. G.	Influence of heavyweight aggregates on the physico-mechanical and radiation attenuation properties of serpentine-based concrete	120473
Du, Yuhang / Yang, Jian / Thomas, Blessen Skariah / Li, Lihui / Li, Huanyu / Shaban, Wafaa Mohamed / Tung Chong, Wai	Influence of hybrid graphene oxide/carbon nanotubes on the mechanical properties and microstructure of magnesium potassium phosphate cement paste	120449
Li, Haoxin / Ni, Dayou / Li, Lin / Dong, Biqin / Chen, Qing / Gu, Linan	Insight into the role of polyacrylamide polymer powder on the cracking in plastic period of cement mortar	119914
Huang, Yimiao / Zhang, Junfei / Tze Ann, Foo / Ma, Guowei	Intelligent mixture design of steel fibre reinforced concrete using a support vector regression and firefly algorithm based multi-objective optimization model	120457
Zare, Yasser / Yop Rhee, Kyong	Interfacial factors affecting the strengthening efficacy of nanoclay in nanocomposites	119868
Tian, Yaogang / Yan, Xiaohui / zhang, Mengyuan / Lu, Dong / Yang, Tingting / Wang, Zhenjun / Li, Weiguang	Internal transport and corrosion behaviors of sulfate corrosion media carried by recycled aggregate in concrete	120480
Li, Shuan / Wang, Xiaowei / Ji, Xiaoping / Li, Jingyao / Li, Kang / Shi, Jikai	Investigating the rutting mechanism of asphalt mixtures based on particle tracking technology	119781
Sarıdemir, Mustafa / Çelikten, Serhat	Investigation of fire and chemical effects on the properties of alkali-activated lightweight concretes produced with basaltic pumice aggregate	119969
Ma, Guibao / Li, Hui / Yang, Bing / Zhang, Hengji / Li, Weichao	Investigation on the deformation behavior of open-graded unbound granular materials for permeable pavement	119800
Zhang, Hongliang / Su, Ci / Bu, Xinde / Zhang, Yongping / Gao, Yang / Huang, Man	Laboratory investigation on the properties of polyurethane/unsaturated polyester resin modified bituminous mixture	119865
Sokairge, Hesham / Elgabbas, Fareed / Rashad, Ahmed / Elshafie, Hany	Long-term creep behavior of basalt fiber reinforced polymer bars	120437
Ben Chaabene, Wassim / Flah, Majdi / Nehdi, Moncef L.	Machine learning prediction of mechanical properties of concrete: Critical review	119889
Yu, Miao / You, Zhanping / Wu, Guoxiong / Kong, Lingyun / Liu, Chaochao / Gao, Junfeng	Measurement and modeling of skid resistance of asphalt pavement: A review	119878
Yang, Fan / Qian, Shunzhi	Mechanical and piezoelectric properties of ECC with CNT incorporated through fiber modification	119717
Chen, Aijiu / Han, Xiaoyan / Chen, Meng / Wang, Xiaoyu / Wang, Zhihao / Guo, Tengteng	Mechanical and stress-strain behavior of basalt fiber reinforced rubberized recycled coarse aggregate concrete	119888
Zhang, Chunmei / Cai, Jingxuan / Xu, Hao / Cheng, Xiaowei / Guo, Xiaoyang	Mechanical properties and mechanism of wollastonite fibers reinforced oil well cement	120461
Wu, Bo / Yang, Yang / Zhang, Liangliang / Wang, Yuanchao / Li, Haohong	Meso-scale numerical study on the non-uniform corrosion-induced cracking of confined concrete	120463
Zhu, Hongbo / Gou, Hongxiang / Zhou, Haiyun / Jiang, Zhengwu	Microscopic analysis of nano-modified fly ash by fluidized bed reactor-vapor deposition	120434
Shekhawat, Poonam / Sharma, Gunwant / Singh, Rao Martand	Microstructural and morphological development of eggshell powder and flyash-based geopolymers	119886
Hasan, Md Mehedi / Tarefder, Rafiqul A.	A mixture design approach for mitigating cracking issue of asphalt concrete pavement	119861
Liao, Kai-Xing / Zhang, Yun-Peng / Zhang, Wei-Ping / Wang, Ying / Zhang, Rong-Ling	Modeling constitutive relationship of sulfate-attacked concrete	119902
Yan, Luke / Li, Mengru / Li, Qian / Li, Huayi	Modified asphalt based on polyethylene with broad molecular weight distribution	119707
Zagorodnyuk, Lilia / Sumskoy, Dmitry / Lesovik, Valery / Fediuk, Roman	Modified heat-insulating binder using jet-grinded waste of expanded perlite sand	120440
Wang, Pan / Qiao, Gang / Guo, Yupeng / Zhang, Yue / Hou, Dongshuai / Jin, Zuquan / Zhang, Jinrui / Wang, Muhan / Hu, Xiaoxia	Molecular dynamics simulation of the interfacial bonding properties between graphene oxide and calcium silicate hydrate	119927
Li, Hao-Dao / Zhang, Qi-ming / Feng, Ganlin / Mei, Liu / Wang, Yaocheng / Long, Wu-Jian	Multi-scale improved damping of high-volume fly ash cementitious composite: Combined effects of polyvinyl alcohol fiber and graphene oxide	119901
El Hachem, Chady / Abahri, Kamilia / Leclerc, Sebastien / Bennacer, Rachid	NMR and XRD quantification of bound and free water interaction of spruce wood fibers	120470
Liu, Qingyang / Song, Zijian / Han, Han / Donkor, Saddick / Jiang, Linhua / Wang, Wanyi / Chu, Hongqiang	A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves	119695
Pooni, J. / Robert, D. / Giustozzi, F. / Setunge, S. / Xie, Y. M. / Xia, J.	Novel use of calcium sulfoaluminate (CSA) cement for treating problematic soils	120433
Driely Morsch Vidal, Carla / Vargas Vaucher Bandeira, Matthews / Rebolledo La Torre, Kevin / Kosteski, Luis Eduardo / Marangon, Ederli	Numerical and experimental evaluation of the anisotropic behavior and boundary condition of a structural concrete	119858
Dong, Zhifang / Deng, Mingke / Zhang, Yangxi / Zhang, Cong / Ma, Ping	Out-of-plane strengthening of unreinforced masonry walls using textile reinforced mortar added short polyvinyl alcohol fibers	119910
Joseph, Aneeta Mary / Snellings, Ruben / Nielsen, Peter / Matthys, Stijn / De Belie, Nele	Pre-treatment and utilisation of municipal solid waste incineration bottom ashes towards a circular economy	120485
Nguyen-Sy, Tuan / Wakim, Jad / To, Quy-Dong / Vu, Minh-Ngoc / Nguyen, The-Duong / Nguyen, Thoi-Trung	Predicting the compressive strength of concrete from its compositions and age using the extreme gradient boosting method	119757
Barugahare, Javilla / Amirkhanian, Armen N. / Xiao, Feipeng / Amirkhanian, Serji N.	Predicting the dynamic modulus of hot mix asphalt mixtures using bagged trees ensemble	120468
Rasul, Mehboob / Hosoda, Akira / Maekawa, Koichi	Prediction of maximum thermal crack width of RC abutments utilizing actual construction data and study on influential parameters using neural networks	120477
Ma, Yangbao / Lv, Shanshan / Yao, Xiaorui / Zhang, Yanhua / Gu, Jiyou	Preparation of isocyanate microcapsules as a high-performance adhesive for PLA/WF	120483
Heikal, Mohamed / Zaki, M. E. A. / Ibrahim, Sahar M.	Preparation, physico-mechanical characteristics and durability of eco-alkali-activated binder from blast-furnace slag, cement kiln-by-pass dust and microsilica ternary system	119947
Laanaiya, M. / Zaoui, A.	Preventing cement-based materials failure by embedding Fe2O3 nanoparticles	120466
Boccarusso, Luca / Durante, Massimo / Iucolano, Fabio / Mocerino, Davide / Langella, Antonio	Production of hemp-gypsum composites with enhanced flexural and impact resistance	120476
Zhang, Jian / Li, Shucai / Li, Zhaofeng / Liu, Chao / Gao, Yifan / Qi, Yanhai	Properties of red mud blended with magnesium phosphate cement paste: Feasibility of grouting material preparation	119704
Kim, Min-Jun / Kim, Hyeong-Gook / Lee, Yong-Jun / Kim, Dong-Hwan / Lee, Jung-Yoon / Kim, Kil-Hee	Pure torsional behavior of RC beams in relation to the amount of torsional reinforcement and cross-sectional properties	119801
Coletti, Chiara / Brattich, Erika / Cinelli, Giorgia / Cultrone, Giuseppe / Maritan, Lara / Mazzoli, Claudio / Mostacci, Domiziano / Tositti, Laura / Sassi, Raffaele	Radionuclide concentration and radon exhalation in new mix design of bricks produced reusing NORM by-products: The influence of mineralogy and texture	119820
Maierdan, Yierfan / Aminul Haque, M. / Chen, Bing / Maimaitiyiming, Muhetaer / Ahmad, Muhammad Riaz	Recycling of waste river sludge into unfired green bricks stabilized by a combination of phosphogypsum, slag, and cement	120666
Berger, F. / Gauvin, F. / Brouwers, H. J. H.	The recycling potential of wood waste into wood-wool/cement composite	119786
Ford, Emily L. / Hoover, Christian G. / Mobasher, Barzin / Neithalath, Narayanan	Relating the nano-mechanical response and qualitative chemical maps of multi-component ultra-high performance cementitious binders	119959
Aluko, Oluwatobi Gbenga / Yatim, Jamaludin Mohamad / Kadir, Mariyana Aida Ab. / Yahya, Khairuzan	A review of properties of bio-fibrous concrete exposed to elevated temperatures	119671
Xue, Junqing / Briseghella, Bruno / Huang, Fuyun / Nuti, Camillo / Tabatabai, Habib / Chen, Baochun	Review of ultra-high performance concrete and its application in bridge engineering	119844
Elahi, Md Manjur A. / Hossain, Md. Maruf / Karim, Md Rezaul / Zain, Muhammad Fauzi Mohd / Shearer, Christopher	A review on alkali-activated binders: Materials composition and fresh properties of concrete	119788
Yoon, Jinyoung / Kim, Hyunjun / Shin, Sung Woo / Sim, Sung-Han	Rheology-based determination of injectable grout fluidity for preplaced aggregate concrete using ultrasonic tomography	120447
Aminul Haque, M. / Chen, Bing / Liu, Yuantao	The role of bauxite and fly-ash on the water stability and microstructural densification of magnesium phosphate cement composites	119953
Li, Ting / Su, Qian / Kaewunruen, Sakdirat	Seismic metamaterial barriers for ground vibration mitigation in railways considering the train-track-soil dynamic interactions	119936
Xue, Caihong / Li, Wengui / Qu, Fulin / Sun, Zhihui / Shah, Surendra P.	Self-healing efficiency and crack closure of smart cementitious composite with crystalline admixture and structural polyurethane	119955
Zhang, Rui / Hu, Peng / Zheng, Xiaohang / Cai, Lianheng / Guo, Rui / Wei, Dingbang	Shear behavior of RC slender beams without stirrups by using precast U-shaped ECC permanent formwork	120430
Zhang, Kai / Zhang, Jun / Jin, Weiliang / Mao, Jianghong / Long, Jiangxing	Stiffness degradation for fatigue of reinforced concrete beams after electrochemical rehabilitation	120455
Lagos-Varas, M. / Raposeiras, A. C. / Movilla-Quesada, D. / Arenas, J. P. / Castro-Fresno, D. / Muñoz-Cáceres, O. / Andres-Valeri, V. C.	Study of the permanent deformation of binders and asphalt mixtures using rheological models of fractional viscoelasticity	120438
Chen, Ying / Liu, Peng / Yu, Zhiwu	Study on degradation of macro performances and micro structure of concrete attacked by sulfate under artificial simulated environment	119951
Zhang, Yan / Chen, Da / Liang, Yunchao / Qu, Kaicheng / Lu, Kehua / Chen, Shijia / Kong, Mengjie	Study on engineering properties of foam concrete containing waste seashell	119896
Li, Bin / Sun, Guoqiang / Sun, Daquan / Lu, Tong / Ma, Jianmin / Deng, Yue	Survival and activation behavior of microcapsules in self-healing asphalt mixture	119719
Meybodian, Hadi / Eslami, Abolfazl / Morshed, Reza	Sustainable lateral strengthening of traditional adobe walls using natural reinforcements	119892
Dong, Zhifang / Deng, Mingke / Zhang, Cong / Zhang, Yangxi / Sun, Hongzhe	Tensile behavior of glass textile reinforced mortar (TRM) added with short PVA fibers	119897
Zhang, Zhongya / Zhou, Jianting / Yang, Jun / Zou, Yang / Wang, Zongshan	Understanding of the deterioration characteristic of concrete exposed to external sulfate attack: Insight into mesoscopic pore structures	119932
Li, Wanzhao / Chen, Chaoyi / Shi, Jiangtao / Mei, Changtong / Kibleur, Pierre / Van Acker, Joris / van den Bulcke, Jan	Understanding the mechanical performance of OSB in compression tests	119837
Li, Qinglin / Wei, Haibin / Zhang, Yangpeng / Han, Leilei / Han, Shanye / Ding, Ning	The variations on thermal conductivity and structures of silty clay modified by waste fly ash and oil shale ash after freeze–thaw cycles	119954
Gong, Wei / Wang, Nan / Zhang, Na / Han, Wenliang / Qiao, Hongxia	Water resistance and a comprehensive evaluation model of magnesium oxychloride cement concrete based on Taguchi and entropy weight method	119817
Hung, Chung-Chan / Chen, Yueh-Ting / Yen, Cheng-Hao	Workability, fiber distribution, and mechanical properties of UHPC with hooked end steel macro-fibers	119944

Informations
sur cette fiche
IssueID
37299
Publié(e) le:
12.07.2020
Modifié(e) le:
09.01.2021

Publicité

Construction and Building Materials - novembre 2020

Articles dans ce numéro

Données obligatoires