Construction and Building Materials - February 2018

Published:	February 2018

Articles in this Issue

Author(s)	Title	Page(s)
Zhang, Peng / Liu, Zhaolin / Wang, Yu / Yang, Jinbo / Han, Songbai / Zhao, Tiejun	3D neutron tomography of steel reinforcement corrosion in cement-based composites	561-565
Livitsanos, G. / Shetty, N. / Hündgen, D. / Verstrynge, E. / Wevers, M. / Van Hemelrijck, D. / Aggelis, D. G.	Acoustic emission characteristics of fracture modes in masonry materials	914-922
Rasheed, Mohammad Abdur / Prakash, S. Suriya	Behavior of hybrid-synthetic fiber reinforced cellular lightweight concrete under uniaxial tension – Experimental and analytical studies	857-870
Ozawa, Mitsuo / Tanibe, Toru / Kamata, Ryota / Uchida, Yuichi / Rokugo, Keitetsu / Parajuli, Sirjana Subedi	Behavior of ring-restrained high-performance concrete under extreme heating and development of screening test	215-228
Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh	Bond performance of NSM CFRP strips embedded in concrete using direct pull-out testing with cementitious adhesive made with graphene oxide	523-533
Wang, Lei / Mao, Yadong / Lv, Haibo / Chen, Shuang / Li, Wei	Bond properties between FRP bars and coral concrete under seawater conditions at 30, 60, and 80 °C	442-449
Belda Revert, Andres / De Weerdt, Klaartje / Hornbostel, Karla / Geiker, Mette Rica	Carbonation-induced corrosion: Investigation of the corrosion onset	847-856
Giannini, Eric R. / Sanchez, Leandro F. M. / Tuinukuafe, Atolo / Folliard, Kevin J.	Characterization of concrete affected by delayed ettringite formation using the stiffness damage test	253-264
Jia, Chaojun / Xu, Weiya / Wang, Rubin / Wang, Wei / Zhang, Jiuchang / Yu, Jun	Characterization of the deformation behavior of fine-grained sandstone by triaxial cyclic loading	113-123
AbdelAleem, Basem H. / Ismail, Mohamed K. / Hassan, Assem A. A.	The combined effect of crumb rubber and synthetic fibers on impact resistance of self-consolidating concrete	816-829
Xu, Shuqiang / Ma, Qinglin / Wang, Julin	Combined effect of isobutyltriethoxysilane and silica fume on the performance of natural hydraulic lime-based mortars	181-191
Yoo, Doo-Yeol / Kim, Soonho / Kim, Min-Jae	Comparative shrinkage behavior of ultra-high-performance fiber-reinforced concrete under ambient and heat curing conditions	406-419
Liu, Pengfei / Xu, Huining / Wang, Dawei / Wang, Chonghui / Schulze, Christian / Oeser, Markus	Comparison of mechanical responses of asphalt mixtures manufactured by different compaction methods	765-780
Hu, Fangxin / Shi, Gang	Constitutive model for full-range cyclic behavior of high strength steels without yield plateau	596-607
Verstrynge, Els / De Wilder, Kristof / Drougkas, Anastasios / Voet, Eli / Van Balen, Koen / Wevers, Martine	Crack monitoring in historical masonry with distributed strain and acoustic emission sensing techniques	898-907
Allaoui, S. / Rekik, A. / Gasser, A. / Blond, E. / Andreev, K.	Digital Image Correlation measurements of mortarless joint closure in refractory masonries	334-344
Lee, Jae-Man / Lee, Yong-Jun / Jung, You-Jin / Park, Jung-Han / Lee, Bum-Sik / Kim, Kil-Hee	Ductile capacity of reinforced concrete columns with electric arc furnace oxidizing slag aggregate	781-793
Indacoechea-Vega, I. / Pascual-Muñoz, P. / Castro-Fresno, D. / Zamora-Barraza, D.	Durability of geothermal grouting materials considering extreme loads	732-739
Sharma, Snigdha / Arora, Sumit	Economical graphene reinforced fly ash cement composite made with recycled aggregates for improved sulphate resistance and mechanical performance	608-612
Keulen, A. / Yu, Q. L. / Zhang, S. / Grünewald, S.	Effect of admixture on the pore structure refinement and enhanced performance of alkali-activated fly ash-slag concrete	27-36
Lo, Kang-Wei / Lin, Kae-Long / Cheng, Ta-Wui / Shiu, Hau-Shing	Effect of alkali activation thin film transistor-liquid crystal display waste glass on the mechanical behavior of geopolymers	724-731
Titi, Hani H. / Tabatabai, Habib	Effect of coarse aggregate type on chloride ion penetration in concrete	871-880
Uygunoğlu, Tayfun / Hocaoğlu, İsmail	Effect of electrical curing application on setting time of concrete with different stress intensity	298-305
Makul, Natt / Sua-iam, Gritsada	Effect of granular urea on the properties of self-consolidating concrete incorporating untreated rice husk ash: Flowability, compressive strength and temperature rise	489-502
Srivabut, Chainarong / Ratanawilai, Thanate / Hiziroglu, Salim	Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber	450-458
Yu, Ye / Sun, Lu	Effect of overlay thickness, overlay material, and pre-overlay treatment on evolution of asphalt concrete overlay roughness in LTPP SPS-5 experiment: A multilevel model approach	192-201
Zeng, Qianpu / Wang, Chong / Luo, Yaoling / Yu, Chao / Huang, Qian / Luo, Chaoqun	Effect of temperatures on TSA in cement mortars under electrical field	88-95
Gong, Chenchen / Zhou, Xiangming / Ji, Lei / Dai, Wenyan / Lu, Lingchao / Cheng, Xin	Effects of limestone powders on pore structure and physiological characteristics of planting concrete with sulfoaluminate cement	314-320
Sadrmomtazi, Ali / Tahmouresi, Behzad / Saradar, Ashkan	Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC)	321-333
Sabzi, Javad / Esfahani, M. Reza	Effects of tensile steel bars arrangement on concrete cover separation of RC beams strengthened by CFRP sheets	470-479
Takamine, Hidefumi / Watabe, Kazuo / Miyata, Hirokazu / Asaue, Hisafumi / Nishida, Takahiro / Shiotani, Tomoki	Efficient damage inspection of deteriorated RC bridge deck with rain-induced elastic wave	908-913
Lv, Xingjun / Duan, Yuping / Chen, Guoqing	Electromagnetic wave absorption properties of cement-based composites filled with graphene nano-platelets and hollow glass microspheres	280-285
Kumar, V. Vinay / Saride, Sireesh	Evaluation of cracking resistance potential of geosynthetic reinforced asphalt overlays using direct tensile strength test	37-47
Liu, Yang / Qian, Zhen-dong / Zheng, Dong / Huang, Qi-bo	Evaluation of epoxy asphalt-based concrete substructure for high-speed railway ballastless track	229-238
Koltsida, I. S. / Tomor, A. K. / Booth, C. A.	Experimental evaluation of changes in strain under compressive fatigue loading of brick masonry	104-112
de Melo, João Victor Staub / Trichês, Glicério / de Rosso, Lucas Torres	Experimental evaluation of the influence of reinforcement with Multi-Walled Carbon Nanotubes (MWCNTs) on the properties and fatigue life of hot mix asphalt	369-382
Shen, Peiliang / Lu, Linnu / He, Yongjia / Rao, Meijuan / Fu, Zedong / Wang, Fazhou / Hu, Shuguang	Experimental investigation on the autogenous shrinkage of steam cured ultra-high performance concrete	512-522
Li, Qiang / Niu, Di-tao / Xiao, Qian-hui / Guan, Xiao / Chen, Shao-jie	Experimental study on seismic behaviors of concrete columns confined by corroded stirrups and lateral strength prediction	704-713
Vishwakarma, Vinita / Ramachandran, D.	Green Concrete mix using solid waste and nanoparticles as alternatives – A review	96-103
Vejmelková, Eva / Koňáková, Dana / Scheinherrová, Lenka / Doleželová, Magdalena / Keppert, Martin / Černý, Robert	High temperature durability of fiber reinforced high alumina cement composites	881-891
Zhang, Lei / Yang, Liu / Jelle, Bjørn Petter / Wang, Yu / Gustavsen, Arild	Hygrothermal properties of compressed earthen bricks	576-583
Bocciarelli, Massimiliano / Ranzi, Gianluca	Identification of the hygro-thermo-chemical-mechanical model parameters of concrete through inverse analysis	202-214
Tan, Hongbo / Gu, Benqing / Guo, Yulin / Ma, Baoguo / Huang, Jian / Ren, Jun / Zou, Fubing / Guo, Yanfei	Improvement in compatibility of polycarboxylate superplasticizer with poor-quality aggregate containing montmorillonite by incorporating polymeric ferric sulfate	566-575
Marasteanu, Mihai / Cannone Falchetto, Augusto / Balamurugan, Sreelatha / Negulescu, Ioan I.	Influence of cooling medium on low temperature strength of asphalt binders	80-87
Zhong, Rui / Wille, Kay	Influence of matrix and pore system characteristics on the durability of pervious concrete	132-141
Eslami, Javad / Walbert, Charlotte / Beaucour, Anne-Lise / Bourgès, Ann / Noumowé, Albert	Influence of physical and mechanical properties on the durability of limestone subjected to freeze-thaw cycles	420-429
Rashidian-Dezfouli, Hassan / Rangaraju, Prasada Rao / Kothala, Venkat Sai Kumar	Influence of selected parameters on compressive strength of geopolymer produced from ground glass fiber	393-405
Bekhta, Pavlo / Salca, Emilia-Adela	Influence of veneer densification on the shear strength and temperature behavior inside the plywood during hot press	20-26
Wang, Yan-qi / Kong, Gang / Che, Chun-shan / Zhang, Bo	Inhibitive effect of sodium molybdate on the corrosion behavior of galvanized steel in simulated concrete pore solution	383-392
Li, Yue / Zhang, Guosheng / Wang, Zigeng / Wang, Peng / Guan, Zhongzheng	Integrated experimental-computational approach for evaluating elastic modulus of cement paste corroded in brine solution on microscale	459-469
Guimarães, A. S. / Delgado, J. M. P. Q. / Azevedo, A. C. / de Freitas, V. P.	Interface influence on moisture transport in buildings	480-488
Ghasemi, Mohammad / Ghasemi, Mohammad Reza / Mousavi, Seyed Roohollah	Investigating the effects of maximum aggregate size on self-compacting steel fiber reinforced concrete fracture parameters	674-682
Bhuiyan, Shamir / Law, David W. / Nicholls, Peter / Christodoulou, Christian	Investigation of the residual protection of steel following application of protective current	503-511
Li, Wei / Lang, Lei / Wang, Da / Wu, Yang / Li, Fudong	Investigation on the dynamic shear modulus and damping ratio of steel slag sand mixtures	170-180
Khiavi, Alireza Khavandi / Rasouli, Ramin	Laboratory evaluation of loading frequency effects on HMA self-healing	1-8
He, Jialuo / Du, Sen / Yang, Zhengxian / Shi, Xianming	Laboratory investigation of graphene oxide suspension as a surface sealer for cementitious mortars	65-79
Ruan, Yanfeng / Han, Baoguo / Yu, Xun / Li, Zhen / Wang, Jialiang / Dong, Sufen / Ou, Jinping	Mechanical behaviors of nano-zirconia reinforced reactive powder concrete under compression and flexure	663-673
Tasnim, Sadia / Rahman, Muhammad Ekhlasur / Ahmadi, Raudhah Binti	Mechanical performance of modified cement paste made with micro-fine POFA in ammonium nitrate environment	534-542
Hajiloo, Hamzeh / Green, Mark F. / Gales, John	Mechanical properties of GFRP reinforcing bars at high temperatures	142-154
Li, Lang / Wang, Qingyuan / Zhang, Guomin / Shi, Long / Dong, Jiangfeng / Jia, Pu	A method of detecting the cracks of concrete undergo high-temperature	345-358
Yao, Hui / Dai, Qingli / You, Zhanping / Bick, Andreas / Wang, Min	Modulus simulation of asphalt binder models using Molecular Dynamics (MD) method	430-441
Bhalla, Nikita / Sharma, Sandeep / Sharma, Shruti / Siddique, Rafat	Monitoring early-age setting of silica fume concrete using wave propagation techniques	802-815
Wu, Yuching / Xiao, Jianzhuang	Multiscale digital-image driven stochastic finite element modeling of chloride diffusion in recycled aggregate concrete	239-252
Zang, Guoshuai / Sun, Lijun / Chen, Zhang / Li, Li	A nondestructive evaluation method for semi-rigid base cracking condition of asphalt pavement	892-897
Wang, Liang / Wang, Jialai / Xu, Ying / Chen, Peiyuan / Yuan, Jie / Qian, Xin	Novel surface treatment of concrete bricks using acid-resistance mineral precipitation	265-271
Al-Hdabi, Abbas / Nageim, Hassan Al	Performance of Half Warm Rolled Asphalt mixtures	48-56
Ye, Hailong / Fu, Chuanqing / Jin, Nanguo / Jin, Xianyu	Performance of reinforced concrete beams corroded under sustained service loads: A comparative study of two accelerated corrosion techniques	286-297
Yin, Rongrong / Li, Baocheng / Zhang, Chenchen / Wu, Qing / Xie, He / Wang, Yuxin	The permeability of SO42− and Cl− in concrete under the effect of seepage flow and stress fields	697-703
Pérez-Nicolás, M. / Plank, J. / Ruiz-Izuriaga, D. / Navarro-Blasco, Í. / Fernández, J. M. / Alvarez, J. I.	Photocatalytically active coatings for cement and air lime mortars: Enhancement of the activity by incorporation of superplasticizers	628-648
Nemati Chari, Mehdi / Shekarchi, Mohammad / Tadayon, Mohammad Hosein / Moradian, Masoud	' Prediction of chloride ingress into blended cement concrete: Evaluation of a combined short-term laboratory-numerical procedure	649-662
Ma, Guowei / Li, Zhijian / Wang, Li	Printable properties of cementitious material containing copper tailings for extrusion based 3D printing	613-627
Fang, Yuan / Cui, Peng / Ding, Zhu / Zhu, Ji-Xiang	Properties of a magnesium phosphate cement-based fire-retardant coating containing glass fiber or glass fiber powder	553-560
Chaudemanche, Samuel / Perrot, Arnaud / Pimbert, Sylvie / Lecompte, Thibaut / Faure, Florent	Properties of an industrial extruded HDPE-WPC: The effect of the size distribution of wood flour particles	543-552
Lameiras, Rodrigo / Valente, Isabel B. / Barros, Joaquim A. O. / Azenha, Miguel / Gonçalves, Cláudia	Pull-out behaviour of Glass-Fibre Reinforced Polymer perforated plate connectors embedded in concrete. Part I: Experimental program	155-169
Hajibabaee, Amir / Khanzadeh Moradllo, Mehdi / Behravan, Amir / Ley, M. Tyler	Quantitative measurements of curing methods for concrete bridge decks	306-313
Yang, Zhenzhou / Ji, Ru / Liu, Lili / Wang, Xidong / Zhang, Zuotai	Recycling of municipal solid waste incineration by-product for cement composites preparation	794-801
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Lee, Siew Cheng / Goh, Wan Inn / Yuen, Choon Wah	Recycling of seashell waste in concrete: A review	751-764
Young, Benjamin A. / Falzone, Gabriel / Wei, Zhenhua / Sant, Gaurav / Pilon, Laurent	Reduced-scale experiments to evaluate performance of composite building envelopes containing phase change materials	584-595
García, L. D. / Pastor, J. M. / Peña, J.	Self cleaning and depolluting glass reinforced concrete panels: Fabrication, optimization and durability evaluation	9-19
Alam, Md. Ashraful / Al Riyami, Khalid	Shear strengthening of reinforced concrete beam using natural fibre reinforced polymer laminates	683-696
Beglarigale, Ahsanollah / Seki, Yoldas / Demir, Naim Yağız / Yazıcı, Halit	Sodium silicate/polyurethane microcapsules used for self-healing in cementitious materials: Monomer optimization, characterization, and fracture behavior	57-64
Hanjitsuwan, Sakonwan / Phoo-ngernkham, Tanakorn / Li, Long-yuan / Damrongwiriyanupap, Nattapong / Chindaprasirt, Prinya	Strength development and durability of alkali-activated fly ash mortar with calcium carbide residue as additive	714-723
Vollpracht, Anya / Soutsos, Marios / Kanavaris, Fragkoulis	Strength development of GGBS and fly ash concretes and applicability of fib model code’s maturity function – A critical review	830-846
Kaya, Gulcihan Guzel / Yilmaz, Elif / Deveci, Huseyin	Sustainable bean pod/calcined kaolin reinforced epoxy hybrid composites with enhanced mechanical, water sorption and corrosion resistance properties	272-279
Bompan, Karen F. / Haach, Vladimir G.	Ultrasonic tests in the evaluation of the stress level in concrete prisms based on the acoustoelasticity	740-750
Ayati, Bamdad / Ferrándiz-Mas, Veronica / Newport, Darryl / Cheeseman, Christopher	Use of clay in the manufacture of lightweight aggregate	124-131
Wang, Chao-qiang / Lin, Xiao-yan / Wang, Dan / He, Ming / Zhang, Si-lan	Utilization of oil-based drilling cuttings pyrolysis residues of shale gas for the preparation of non-autoclaved aerated concrete	359-368

About this
data sheet
IssueID
35503
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.