Construction and Building Materials - Februar 2018

Erschienen:	Februar 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhang, Peng / Liu, Zhaolin / Wang, Yu / Yang, Jinbo / Han, Songbai / Zhao, Tiejun	3D neutron tomography of steel reinforcement corrosion in cement-based composites	561-565
Livitsanos, G. / Shetty, N. / Hündgen, D. / Verstrynge, E. / Wevers, M. / Van Hemelrijck, D. / Aggelis, D. G.	Acoustic emission characteristics of fracture modes in masonry materials	914-922
Rasheed, Mohammad Abdur / Prakash, S. Suriya	Behavior of hybrid-synthetic fiber reinforced cellular lightweight concrete under uniaxial tension – Experimental and analytical studies	857-870
Ozawa, Mitsuo / Tanibe, Toru / Kamata, Ryota / Uchida, Yuichi / Rokugo, Keitetsu / Parajuli, Sirjana Subedi	Behavior of ring-restrained high-performance concrete under extreme heating and development of screening test	215-228
Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh	Bond performance of NSM CFRP strips embedded in concrete using direct pull-out testing with cementitious adhesive made with graphene oxide	523-533
Wang, Lei / Mao, Yadong / Lv, Haibo / Chen, Shuang / Li, Wei	Bond properties between FRP bars and coral concrete under seawater conditions at 30, 60, and 80 °C	442-449
Belda Revert, Andres / De Weerdt, Klaartje / Hornbostel, Karla / Geiker, Mette Rica	Carbonation-induced corrosion: Investigation of the corrosion onset	847-856
Giannini, Eric R. / Sanchez, Leandro F. M. / Tuinukuafe, Atolo / Folliard, Kevin J.	Characterization of concrete affected by delayed ettringite formation using the stiffness damage test	253-264
Jia, Chaojun / Xu, Weiya / Wang, Rubin / Wang, Wei / Zhang, Jiuchang / Yu, Jun	Characterization of the deformation behavior of fine-grained sandstone by triaxial cyclic loading	113-123
AbdelAleem, Basem H. / Ismail, Mohamed K. / Hassan, Assem A. A.	The combined effect of crumb rubber and synthetic fibers on impact resistance of self-consolidating concrete	816-829
Xu, Shuqiang / Ma, Qinglin / Wang, Julin	Combined effect of isobutyltriethoxysilane and silica fume on the performance of natural hydraulic lime-based mortars	181-191
Yoo, Doo-Yeol / Kim, Soonho / Kim, Min-Jae	Comparative shrinkage behavior of ultra-high-performance fiber-reinforced concrete under ambient and heat curing conditions	406-419
Liu, Pengfei / Xu, Huining / Wang, Dawei / Wang, Chonghui / Schulze, Christian / Oeser, Markus	Comparison of mechanical responses of asphalt mixtures manufactured by different compaction methods	765-780
Hu, Fangxin / Shi, Gang	Constitutive model for full-range cyclic behavior of high strength steels without yield plateau	596-607
Verstrynge, Els / De Wilder, Kristof / Drougkas, Anastasios / Voet, Eli / Van Balen, Koen / Wevers, Martine	Crack monitoring in historical masonry with distributed strain and acoustic emission sensing techniques	898-907
Allaoui, S. / Rekik, A. / Gasser, A. / Blond, E. / Andreev, K.	Digital Image Correlation measurements of mortarless joint closure in refractory masonries	334-344
Lee, Jae-Man / Lee, Yong-Jun / Jung, You-Jin / Park, Jung-Han / Lee, Bum-Sik / Kim, Kil-Hee	Ductile capacity of reinforced concrete columns with electric arc furnace oxidizing slag aggregate	781-793
Indacoechea-Vega, I. / Pascual-Muñoz, P. / Castro-Fresno, D. / Zamora-Barraza, D.	Durability of geothermal grouting materials considering extreme loads	732-739
Sharma, Snigdha / Arora, Sumit	Economical graphene reinforced fly ash cement composite made with recycled aggregates for improved sulphate resistance and mechanical performance	608-612
Keulen, A. / Yu, Q. L. / Zhang, S. / Grünewald, S.	Effect of admixture on the pore structure refinement and enhanced performance of alkali-activated fly ash-slag concrete	27-36
Lo, Kang-Wei / Lin, Kae-Long / Cheng, Ta-Wui / Shiu, Hau-Shing	Effect of alkali activation thin film transistor-liquid crystal display waste glass on the mechanical behavior of geopolymers	724-731
Titi, Hani H. / Tabatabai, Habib	Effect of coarse aggregate type on chloride ion penetration in concrete	871-880
Uygunoğlu, Tayfun / Hocaoğlu, İsmail	Effect of electrical curing application on setting time of concrete with different stress intensity	298-305
Makul, Natt / Sua-iam, Gritsada	Effect of granular urea on the properties of self-consolidating concrete incorporating untreated rice husk ash: Flowability, compressive strength and temperature rise	489-502
Srivabut, Chainarong / Ratanawilai, Thanate / Hiziroglu, Salim	Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber	450-458
Yu, Ye / Sun, Lu	Effect of overlay thickness, overlay material, and pre-overlay treatment on evolution of asphalt concrete overlay roughness in LTPP SPS-5 experiment: A multilevel model approach	192-201
Zeng, Qianpu / Wang, Chong / Luo, Yaoling / Yu, Chao / Huang, Qian / Luo, Chaoqun	Effect of temperatures on TSA in cement mortars under electrical field	88-95
Gong, Chenchen / Zhou, Xiangming / Ji, Lei / Dai, Wenyan / Lu, Lingchao / Cheng, Xin	Effects of limestone powders on pore structure and physiological characteristics of planting concrete with sulfoaluminate cement	314-320
Sadrmomtazi, Ali / Tahmouresi, Behzad / Saradar, Ashkan	Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC)	321-333
Sabzi, Javad / Esfahani, M. Reza	Effects of tensile steel bars arrangement on concrete cover separation of RC beams strengthened by CFRP sheets	470-479
Takamine, Hidefumi / Watabe, Kazuo / Miyata, Hirokazu / Asaue, Hisafumi / Nishida, Takahiro / Shiotani, Tomoki	Efficient damage inspection of deteriorated RC bridge deck with rain-induced elastic wave	908-913
Lv, Xingjun / Duan, Yuping / Chen, Guoqing	Electromagnetic wave absorption properties of cement-based composites filled with graphene nano-platelets and hollow glass microspheres	280-285
Kumar, V. Vinay / Saride, Sireesh	Evaluation of cracking resistance potential of geosynthetic reinforced asphalt overlays using direct tensile strength test	37-47
Liu, Yang / Qian, Zhen-dong / Zheng, Dong / Huang, Qi-bo	Evaluation of epoxy asphalt-based concrete substructure for high-speed railway ballastless track	229-238
Koltsida, I. S. / Tomor, A. K. / Booth, C. A.	Experimental evaluation of changes in strain under compressive fatigue loading of brick masonry	104-112
de Melo, João Victor Staub / Trichês, Glicério / de Rosso, Lucas Torres	Experimental evaluation of the influence of reinforcement with Multi-Walled Carbon Nanotubes (MWCNTs) on the properties and fatigue life of hot mix asphalt	369-382
Shen, Peiliang / Lu, Linnu / He, Yongjia / Rao, Meijuan / Fu, Zedong / Wang, Fazhou / Hu, Shuguang	Experimental investigation on the autogenous shrinkage of steam cured ultra-high performance concrete	512-522
Li, Qiang / Niu, Di-tao / Xiao, Qian-hui / Guan, Xiao / Chen, Shao-jie	Experimental study on seismic behaviors of concrete columns confined by corroded stirrups and lateral strength prediction	704-713
Vishwakarma, Vinita / Ramachandran, D.	Green Concrete mix using solid waste and nanoparticles as alternatives – A review	96-103
Vejmelková, Eva / Koňáková, Dana / Scheinherrová, Lenka / Doleželová, Magdalena / Keppert, Martin / Černý, Robert	High temperature durability of fiber reinforced high alumina cement composites	881-891
Zhang, Lei / Yang, Liu / Jelle, Bjørn Petter / Wang, Yu / Gustavsen, Arild	Hygrothermal properties of compressed earthen bricks	576-583
Bocciarelli, Massimiliano / Ranzi, Gianluca	Identification of the hygro-thermo-chemical-mechanical model parameters of concrete through inverse analysis	202-214
Tan, Hongbo / Gu, Benqing / Guo, Yulin / Ma, Baoguo / Huang, Jian / Ren, Jun / Zou, Fubing / Guo, Yanfei	Improvement in compatibility of polycarboxylate superplasticizer with poor-quality aggregate containing montmorillonite by incorporating polymeric ferric sulfate	566-575
Marasteanu, Mihai / Cannone Falchetto, Augusto / Balamurugan, Sreelatha / Negulescu, Ioan I.	Influence of cooling medium on low temperature strength of asphalt binders	80-87
Zhong, Rui / Wille, Kay	Influence of matrix and pore system characteristics on the durability of pervious concrete	132-141
Eslami, Javad / Walbert, Charlotte / Beaucour, Anne-Lise / Bourgès, Ann / Noumowé, Albert	Influence of physical and mechanical properties on the durability of limestone subjected to freeze-thaw cycles	420-429
Rashidian-Dezfouli, Hassan / Rangaraju, Prasada Rao / Kothala, Venkat Sai Kumar	Influence of selected parameters on compressive strength of geopolymer produced from ground glass fiber	393-405
Bekhta, Pavlo / Salca, Emilia-Adela	Influence of veneer densification on the shear strength and temperature behavior inside the plywood during hot press	20-26
Wang, Yan-qi / Kong, Gang / Che, Chun-shan / Zhang, Bo	Inhibitive effect of sodium molybdate on the corrosion behavior of galvanized steel in simulated concrete pore solution	383-392
Li, Yue / Zhang, Guosheng / Wang, Zigeng / Wang, Peng / Guan, Zhongzheng	Integrated experimental-computational approach for evaluating elastic modulus of cement paste corroded in brine solution on microscale	459-469
Guimarães, A. S. / Delgado, J. M. P. Q. / Azevedo, A. C. / de Freitas, V. P.	Interface influence on moisture transport in buildings	480-488
Ghasemi, Mohammad / Ghasemi, Mohammad Reza / Mousavi, Seyed Roohollah	Investigating the effects of maximum aggregate size on self-compacting steel fiber reinforced concrete fracture parameters	674-682
Bhuiyan, Shamir / Law, David W. / Nicholls, Peter / Christodoulou, Christian	Investigation of the residual protection of steel following application of protective current	503-511
Li, Wei / Lang, Lei / Wang, Da / Wu, Yang / Li, Fudong	Investigation on the dynamic shear modulus and damping ratio of steel slag sand mixtures	170-180
Khiavi, Alireza Khavandi / Rasouli, Ramin	Laboratory evaluation of loading frequency effects on HMA self-healing	1-8
He, Jialuo / Du, Sen / Yang, Zhengxian / Shi, Xianming	Laboratory investigation of graphene oxide suspension as a surface sealer for cementitious mortars	65-79
Ruan, Yanfeng / Han, Baoguo / Yu, Xun / Li, Zhen / Wang, Jialiang / Dong, Sufen / Ou, Jinping	Mechanical behaviors of nano-zirconia reinforced reactive powder concrete under compression and flexure	663-673
Tasnim, Sadia / Rahman, Muhammad Ekhlasur / Ahmadi, Raudhah Binti	Mechanical performance of modified cement paste made with micro-fine POFA in ammonium nitrate environment	534-542
Hajiloo, Hamzeh / Green, Mark F. / Gales, John	Mechanical properties of GFRP reinforcing bars at high temperatures	142-154
Li, Lang / Wang, Qingyuan / Zhang, Guomin / Shi, Long / Dong, Jiangfeng / Jia, Pu	A method of detecting the cracks of concrete undergo high-temperature	345-358
Yao, Hui / Dai, Qingli / You, Zhanping / Bick, Andreas / Wang, Min	Modulus simulation of asphalt binder models using Molecular Dynamics (MD) method	430-441
Bhalla, Nikita / Sharma, Sandeep / Sharma, Shruti / Siddique, Rafat	Monitoring early-age setting of silica fume concrete using wave propagation techniques	802-815
Wu, Yuching / Xiao, Jianzhuang	Multiscale digital-image driven stochastic finite element modeling of chloride diffusion in recycled aggregate concrete	239-252
Zang, Guoshuai / Sun, Lijun / Chen, Zhang / Li, Li	A nondestructive evaluation method for semi-rigid base cracking condition of asphalt pavement	892-897
Wang, Liang / Wang, Jialai / Xu, Ying / Chen, Peiyuan / Yuan, Jie / Qian, Xin	Novel surface treatment of concrete bricks using acid-resistance mineral precipitation	265-271
Al-Hdabi, Abbas / Nageim, Hassan Al	Performance of Half Warm Rolled Asphalt mixtures	48-56
Ye, Hailong / Fu, Chuanqing / Jin, Nanguo / Jin, Xianyu	Performance of reinforced concrete beams corroded under sustained service loads: A comparative study of two accelerated corrosion techniques	286-297
Yin, Rongrong / Li, Baocheng / Zhang, Chenchen / Wu, Qing / Xie, He / Wang, Yuxin	The permeability of SO42− and Cl− in concrete under the effect of seepage flow and stress fields	697-703
Pérez-Nicolás, M. / Plank, J. / Ruiz-Izuriaga, D. / Navarro-Blasco, Í. / Fernández, J. M. / Alvarez, J. I.	Photocatalytically active coatings for cement and air lime mortars: Enhancement of the activity by incorporation of superplasticizers	628-648
Nemati Chari, Mehdi / Shekarchi, Mohammad / Tadayon, Mohammad Hosein / Moradian, Masoud	' Prediction of chloride ingress into blended cement concrete: Evaluation of a combined short-term laboratory-numerical procedure	649-662
Ma, Guowei / Li, Zhijian / Wang, Li	Printable properties of cementitious material containing copper tailings for extrusion based 3D printing	613-627
Fang, Yuan / Cui, Peng / Ding, Zhu / Zhu, Ji-Xiang	Properties of a magnesium phosphate cement-based fire-retardant coating containing glass fiber or glass fiber powder	553-560
Chaudemanche, Samuel / Perrot, Arnaud / Pimbert, Sylvie / Lecompte, Thibaut / Faure, Florent	Properties of an industrial extruded HDPE-WPC: The effect of the size distribution of wood flour particles	543-552
Lameiras, Rodrigo / Valente, Isabel B. / Barros, Joaquim A. O. / Azenha, Miguel / Gonçalves, Cláudia	Pull-out behaviour of Glass-Fibre Reinforced Polymer perforated plate connectors embedded in concrete. Part I: Experimental program	155-169
Hajibabaee, Amir / Khanzadeh Moradllo, Mehdi / Behravan, Amir / Ley, M. Tyler	Quantitative measurements of curing methods for concrete bridge decks	306-313
Yang, Zhenzhou / Ji, Ru / Liu, Lili / Wang, Xidong / Zhang, Zuotai	Recycling of municipal solid waste incineration by-product for cement composites preparation	794-801
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Lee, Siew Cheng / Goh, Wan Inn / Yuen, Choon Wah	Recycling of seashell waste in concrete: A review	751-764
Young, Benjamin A. / Falzone, Gabriel / Wei, Zhenhua / Sant, Gaurav / Pilon, Laurent	Reduced-scale experiments to evaluate performance of composite building envelopes containing phase change materials	584-595
García, L. D. / Pastor, J. M. / Peña, J.	Self cleaning and depolluting glass reinforced concrete panels: Fabrication, optimization and durability evaluation	9-19
Alam, Md. Ashraful / Al Riyami, Khalid	Shear strengthening of reinforced concrete beam using natural fibre reinforced polymer laminates	683-696
Beglarigale, Ahsanollah / Seki, Yoldas / Demir, Naim Yağız / Yazıcı, Halit	Sodium silicate/polyurethane microcapsules used for self-healing in cementitious materials: Monomer optimization, characterization, and fracture behavior	57-64
Hanjitsuwan, Sakonwan / Phoo-ngernkham, Tanakorn / Li, Long-yuan / Damrongwiriyanupap, Nattapong / Chindaprasirt, Prinya	Strength development and durability of alkali-activated fly ash mortar with calcium carbide residue as additive	714-723
Vollpracht, Anya / Soutsos, Marios / Kanavaris, Fragkoulis	Strength development of GGBS and fly ash concretes and applicability of fib model code’s maturity function – A critical review	830-846
Kaya, Gulcihan Guzel / Yilmaz, Elif / Deveci, Huseyin	Sustainable bean pod/calcined kaolin reinforced epoxy hybrid composites with enhanced mechanical, water sorption and corrosion resistance properties	272-279
Bompan, Karen F. / Haach, Vladimir G.	Ultrasonic tests in the evaluation of the stress level in concrete prisms based on the acoustoelasticity	740-750
Ayati, Bamdad / Ferrándiz-Mas, Veronica / Newport, Darryl / Cheeseman, Christopher	Use of clay in the manufacture of lightweight aggregate	124-131
Wang, Chao-qiang / Lin, Xiao-yan / Wang, Dan / He, Ming / Zhang, Si-lan	Utilization of oil-based drilling cuttings pyrolysis residues of shale gas for the preparation of non-autoclaved aerated concrete	359-368

Über diese
Datenseite
IssueID
35503
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.