Construction and Building Materials - February 2018

Published:	February 2018

Articles in this Issue

Author(s)	Title	Page(s)
Mao, Linqiang / Guo, Huijuan / Zhang, Wenyi	Addition of waste glass for improving the immobilization of heavy metals during the use of electroplating sludge in the production of clay bricks	875-879
Villar, Víctor Pérez / Flores Medina, Nelson	Alignment of hooked-end fibres in matrices with similar rheological behaviour to cementitious composites through homogeneous magnetic fields	256-266
Han, Dahee / Kim, Woojae / Lee, Sangkyu / Kim, Hakyoung / Romero, Pedro	Assessment of gamma radiation shielding properties of concrete containers containing recycled coarse aggregates	122-138
Li, Zhuguo / Li, Sha	Carbonation resistance of fly ash and blast furnace slag based geopolymer concrete	668-680
Çınar, M. Emin / Kar, Filiz	Characterization of composite produced from waste PET and marble dust	734-741
Nguyen, Ngoc-Vinh / Pham, Thai-Hoan / Kim, Seung-Eock	Characterization of strain rate effects on the plastic properties of structural steel using nanoindentation	305-314
González-López, J. Rodrigo / Juárez-Alvarado, César A. / Ayub-Francis, Bárbara / Mendoza-Rangel, José Manuel	Compaction effect on the compressive strength and durability of stabilized earth blocks	179-188
Shaikh, Faiz Uddin Ahmed / Fairchild, Anthony / Zammar, Ronnie	Comparative strain and deflection hardening behaviour of polyethylene fibre reinforced ambient air and heat cured geopolymer composites	890-900
Chen, Fangjie / Baji, Hassan / Li, Chun-Qing	A comparative study on factors affecting time to cover cracking as a service life indicator	681-694
Xu, Linglin / Li, Nan / Wang, Ru / Wang, Peiming	A comprehensive study on the relationship between mechanical properties and microstructural development of calcium sulfoaluminate cement based self-leveling underlayments	225-234
Khorsandnia, Nima / Valipour, Hamid / Bradford, Mark	Deconstructable timber-concrete composite beams with panelised slabs: Finite element analysis	798-811
Weng, Yiwei / Li, Mingyang / Tan, Ming Jen / Qian, Shunzhi	Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model	600-610
Shivaprasad, K. N. / Das, B. B.	Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates	428-437
Assaad, Joseph Jean	Development and use of polymer-modified cement for adhesive and repair applications	139-148
Tufekci, M. Mansur / Gokce, Ahmet	Development of heavyweight high performance fiber reinforced cementitious composites (HPFRCC) – Part II: X-ray and gamma radiation shielding properties	326-336
Lei, Bin / Li, Wengui / Tang, Zhuo / Tam, Vivian W. Y. / Sun, Zhihui	Durability of recycled aggregate concrete under coupling mechanical loading and freeze-thaw cycle in salt-solution	840-849
Ortega-López, Vanesa / Fuente-Alonso, José A. / Santamaria, Amaia / San-José, José T. / Aragón, Ángel	Durability studies on fiber-reinforced EAF slag concrete for pavements	471-481
Alnahhal, Mohammed Fouad / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Alsubari, Belal / Alqedra, Mamoun A. / Mo, Kim Hung	Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials	482-495
Dareyni, Mohammad / Mohammadzadeh Moghaddam, Abolfazl / Delarami, Aref	Effect of cationic asphalt emulsion as an admixture on transport properties of roller-compacted concrete	724-733
Ming, Jing / Shi, Jinjie / Sun, Wei	Effect of mill scale on the long-term corrosion resistance of a low-alloy reinforcing steel in concrete subjected to chloride solution	508-517
Zhang, Junzhi / Bian, Fan / Zhang, Yurong / Fang, Zhaofeng / Fu, Chuanqing / Guo, Jie	Effect of pore structures on gas permeability and chloride diffusivity of concrete	402-413
Mei, Junpeng / Tan, Hongbo / Li, Hainan / Ma, Baoguo / Liu, Xiaohai / Jiang, Wenbin / Zhang, Ting / Li, Xin	Effect of sodium sulfate and nano-SiO2 on hydration and microstructure of cementitious materials containing high volume fly ash under steam curing	812-825
Wu, Xun / Li, Lulu / Li, Hui / Li, Baolei / Ling, Zhimin	Effect of strain level on corrosion of stainless steel bar	189-199
Zhang, Hai Yan / Kodur, Venkatesh / Wu, Bo / Yan, Jia / Yuan, Zhen Sheng	Effect of temperature on bond characteristics of geopolymer concrete	277-285
Hu, Jinxuan / Wu, Shaopeng / Liu, Quantao / García Hernández, Maria Inmaculada / Zeng, Wenbo	Effect of ultraviolet radiation on bitumen by different ageing procedures	73-79
Akand, Lutfur / Yang, Mijia / Wang, Xinnan	Effectiveness of chemical treatment on polypropylene fibers as reinforcement in pervious concrete	32-39
Mabry, Nehemiah J. / Seracino, Rudolf / Peters, Kara J.	The effects of accelerated Freeze-Thaw conditioning on CFRP strengthened concrete with pre-existing bond defects	286-295
Zou, Dinghua / Li, Kun / Li, Weidong / Li, Haiyan / Cao, Tianlu	Effects of pore structure and water absorption on internal curing efficiency of porous aggregates	949-959
Ren, G. M. / Wu, H. / Fang, Q. / Liu, J. Z.	Effects of steel fiber content and type on static mechanical properties of UHPCC	826-839
Tchakouté, Hervé K. / Fotio, Daniel / Rüscher, Claus H. / Kamseu, Elie / Djobo, Jean N. Y. / Bignozzi, Maria C. / Leonelli, Cristina	The effects of synthesized calcium phosphate compounds on the mechanical and microstructural properties of metakaolin-based geopolymer cements	776-792
Al-Sodani, Khaled A. Alawi / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed / Shameem, Mohammed	Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration	97-112
Behera, Promoda / Baheti, Vijay / Militky, Jiri / Louda, Petr	Elevated temperature properties of basalt microfibril filled geopolymer composites	850-860
Trujillo, David J. A. / Malkowska, Dominika	Empirically derived connection design properties for Guadua bamboo	9-20
Croce, Pietro / Marsili, Francesca / Klawonn, Frank / Formichi, Paolo / Landi, Filippo	Evaluation of statistical parameters of concrete strength from secondary experimental test data	343-359
Wang, Dawei / Liu, Pengfei / Xu, Huining / Kollmann, Jonas / Oeser, Markus	Evaluation of the polishing resistance characteristics of fine and coarse aggregate for asphalt pavement using Wehner/Schulze test	742-750
Blanco, A. / Cavalaro, S. H. P. / Segura, I. / Segura-Castillo, L. / Aguado, A.	Expansions with different origins in a concrete dam with bridge over spillway	861-874
Bahari, Ali / Sadeghi-Nik, Aref / Roodbari, Mandana / Sadeghi-Nik, Adel / Mirshafiei, Ebrahim	Experimental and theoretical studies of ordinary Portland cement composites contains nano LSCO perovskite with Fokker-Planck and chemical reaction equations	247-255
Liu, Hao / Xiao, Jieling / Wang, Ping / Liu, Ganzhong / Gao, Mingyuan / Li, Shaozheng	Experimental investigation of the characteristics of a granular ballast bed under cyclic longitudinal loading	214-224
Aydın, Ferhat	Experimental investigation of thermal expansion and concrete strength effects on FRP bars behavior embedded in concrete	1-8
Liu, Tiejun / Qin, Shanshan / Zou, Dujian / Song, Wen	Experimental investigation on the durability performances of concrete using cathode ray tube glass as fine aggregate under chloride ion penetration or sulfate attack	634-642
Muñoz, Rosana / Lourenço, Paulo B. / Moreira, Susana	Experimental results on mechanical behaviour of metal anchors in historic stone masonry	643-655
Vu, Van Thang / Chupin, Olivier / Piau, Jean-Michel / Hammoum, Ferhat / Bouron, Stephane	Experimental study and modeling of the behavior of partially saturated asphalt concrete under freezing condition	169-178
Knox, C. L. / Dizhur, D. / Ingham, J. M.	Experimental study on scale effects in clay brick masonry prisms and wall panels investigating compression and shear related properties	706-713
Ling, S. K. / Kwan, A. K. H.	Filler technology for low-carbon high-dimensional stability concrete	87-96
Jawdhari, A. / Harik, I.	Finite element analysis of RC beams strengthened in flexure with CFRP rod panels	751-766
Wastiels, Jan / Van Ackeren, Johan / Tysmans, Tine / Van Paepegem, Wim	Flexural impact response of textile reinforced inorganic phosphate cement composites (TRC)	296-304
Imanzadeh, S. / Hibouche, A. / Jarno, A. / Taïbi, S.	Formulating and optimizing the compressive strength of a raw earth concrete by mixture design	149-159
Abd Elmoaty, Abd Elmoaty M.	Four-years carbonation and chloride induced steel corrosion of sulfate-contaminated aggregates concrete	539-556
Matalkah, Faris / Soroushian, Parviz	Freeze thaw and deicer salt scaling resistance of concrete prepared with alkali aluminosilicate cement	200-213
Peng, Bin / Wang, Dongdong / Zong, Gang / Zhang, Yumei	Homogenization strategy for brick masonry walls under in-plane loading	656-667
Chhun, Ponleu / Sellier, Alain / Lacarrière, Laurie / Chataigner, Sylvain / Gaillet, Laurent	Incremental modeling of relaxation of prestressing wires under variable loading and temperature	337-342
Müller, Torsten / Krämer, Christina / Pritzel, Christian / Bornemann, Rainer / Kowald, Torsten L. / Trettin, Reinhard H. F. / Bolívar, Peter Haring	Influence of cocamidopropyl betaine on the formation and carbonation of portlandite – A microscopy study	793-797
Mohammed, Monketh / Parry, Tony / Grenfell, James (J R. A. ).	Influence of fibres on rheological properties and toughness of bituminous binder	901-911
Hashemi, M. J. / Jamshidi, M. / Aghdam, J. Hassanpour	Investigating fracture mechanics and flexural properties of unsaturated polyester polymer concrete (UP-PC)	767-775
Xu, Jinzhi / Hao, Peiwen / Zhang, Depeng / Yuan, Gaoang	Investigation of reclaimed asphalt pavement blending efficiency based on micro-mechanical properties of layered asphalt binders	390-401
Scribot, Cyril / Maherzi, Walid / Benzerzour, Mahfoud / Mamindy-Pajany, Yannick / Abriak, Nor-Edine	A laboratory-scale experimental investigation on the reuse of a modified red mud in ceramic materials production	21-31
Ramezanianpour, Ali Akbar / Moeini, Mohammad Amin	Mechanical and durability properties of alkali activated slag coating mortars containing nanosilica and silica fume	611-621
Tabatabai, Habib / Janbaz, Morteza / Nabizadeh, Azam	Mechanical and thermo-gravimetric properties of unsaturated polyester resin blended with FGD gypsum	438-445
Bui, Ngoc Kien / Satomi, Tomoaki / Takahashi, Hiroshi	Mechanical properties of concrete containing 100% treated coarse recycled concrete aggregate	496-507
Hu, Hang / Papastergiou, Panos / Angelakopoulos, Harris / Guadagnini, Maurizio / Pilakoutas, Kypros	Mechanical properties of SFRC using blended manufactured and recycled tyre steel fibres	376-389
Bishnoi, Shashank / Joseph, Shiju / Kaur, Amarpreet	Microstructural modelling of the strength of mortars containing fly ash using µic	912-920
Abdulkareem, Omar M. / Ben Fraj, Amor / Bouasker, Marwen / Khelidj, Abdelhafid	Mixture design and early age investigations of more sustainable UHPC	235-246
Lee, Changgil / Park, Seunghee / Bolander, John E. / Pyo, Sukhoon	Monitoring the hardening process of ultra high performance concrete using decomposed modes of guided waves	267-276
Lu, Zeyu / Hanif, Asad / Lu, Cong / Liu, Kaiju / Sun, Guoxing / Li, Zongjin	A novel lightweight cementitious composite with enhanced thermal insulation and mechanical properties by extrusion technique	446-449
Deng, Jun / Li, Junhui / Wang, Yi / Xie, Weizhi	Numerical study on notched steel beams strengthened by CFRP plates	622-633
She, Wei / Zhao, Guotang / Cai, Degou / Jiang, Jinyang / Cao, Xiaoyu	Numerical study on the effect of pore shapes on the thermal behaviors of cellular concrete	113-121
Zuo, Wenqiang / Liu, Jiaping / Tian, Qian / Xu, Wen / She, Wei / Feng, Pan / Miao, Changwen	Optimum design of low-binder Self-Compacting Concrete based on particle packing theories	938-948
Liu, Kefei / Zhang, Kun / Shi, Xianming	Performance evaluation and modification mechanism analysis of asphalt binders modified by graphene oxide	880-889
Bedon, Chiara / Zhang, Xihong / Santos, Filipe / Honfi, Dániel / Kozłowski, Marcin / Arrigoni, Michel / Figuli, Lucia / Lange, David	Performance of structural glass facades under extreme loads – Design methods, existing research, current issues and trends	921-937
Zhu, Cong / Zhang, Jianxin / Peng, Jiahui / Cao, Wenxiang / Liu, Jiangsen	Physical and mechanical properties of gypsum-based composites reinforced with PVA and PP fibers	695-705
Sena da Fonseca, B. / Ferreira Pinto, A. P. / Piçarra, S. / Montemor, M. F.	The potential action of single functionalization treatments and combined treatments for the consolidation of carbonate stones	586-599
Luo, Yang / Zheng, Shili / Ma, Shuhua / Liu, Chunli / Wang, Xiaohui	Preparation of sintered foamed ceramics derived entirely from coal fly ash	529-538
Li, Wei / Hong, Jinxiang / Zhu, Xiaobin / Yang, Dingyi / Bai, Yun / Liu, Jiaping / Miao, Changwen	Retardation mechanism of anionic asphalt emulsion on the hydration of Portland cement	714-723
Chen, Yuchi / Wang, Teng / Zhou, Min / Hou, Haobo / Xue, Yongjie / Wang, Hao	Rice husk and sewage sludge co-combustion ash: Leaching behavior analysis and cementitious property	63-72
Liu, Ping / Hu, Dean / Wu, Qiankun / Liu, Xuemei	Sensitivity and uncertainty analysis of interfacial effect in SHPB tests for concrete-like materials	414-427
Vieira, Darli Rodrigues / Moreira, Adrianne Lúcia Ribeiro / Calmon, João Luiz / Dominicini, Wagner Klippel	Service life modeling of a bridge in a tropical marine environment for durable design	315-325
Wang, Sihao / He, Jun / Liu, Yuqing / Li, Chuanxi / Xin, Haohui	Shear capacity of a novel joint between corrugated steel web and concrete lower slab	360-375
Pastor, José L. / Ortega, J. Marcos / Climent, Miguel A. / Sánchez, Isidro	Skin friction coefficient change on cement grouts for micropiles due to sulfate attack	80-86
Ruano, Gonzalo / Isla, Facundo / Luccioni, Bibiana / Zerbino, Raul / Giaccio, Graciela	Steel fibers pull-out after exposure to high temperatures and its contribution to the residual mechanical behavior of high strength concrete	571-585
Sajid, Sikandar H. / Ali, Syed M. / Carino, Nicholas J. / Saeed, Salman / Sajid, Hizb Ullah / Chouinard, Luc	Strength estimation of concrete masonry units using stress-wave methods	518-528
Zhao, Yan-Ru / Wang, Lei / Lei, Zhen-Kun / Han, Xiao-Feng / Shi, Jin-Na	Study on bending damage and failure of basalt fiber reinforced concrete under freeze-thaw cycles	460-470
Li, Ming / Xie, Dongbo / Shu, Qiugui / Ou, Hongjuan / Guo, Xiaoyang	Study on sodium fatty alcohol polyoxyethyleneether sulfate relieve the contamination of oil well cement with mineral oil-based drilling fluids	450-459
Rajhans, Puja / Panda, Sarat Kumar / Nayak, Sanket	Sustainable self compacting concrete from C&D waste by improving the microstructures of concrete ITZ	557-570
Badache, Abdelhak / Benosman, Ahmed Soufiane / Senhadji, Yassine / Mouli, Mohamed	Thermo-physical and mechanical characteristics of sand-based lightweight composite mortars with recycled high-density polyethylene (HDPE)	40-52
Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa / Mesbah, Habib A. / Hossain, Khandaker M. Anwar	Use of recycled glass powder to improve the performance properties of high volume fly ash-engineered cementitious composites	53-62
Bigdeli, Yasser / Barbato, Michele / Gutierrez-Wing, Maria Teresa / Lofton, Charles D.	Use of slurry fluorogypsum (FG) with controlled pH-adjustment in FG-based blends	160-168

About this
data sheet
IssueID
35502
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.