Construction and Building Materials - février 2018

Publié:	février 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Mao, Linqiang / Guo, Huijuan / Zhang, Wenyi	Addition of waste glass for improving the immobilization of heavy metals during the use of electroplating sludge in the production of clay bricks	875-879
Villar, Víctor Pérez / Flores Medina, Nelson	Alignment of hooked-end fibres in matrices with similar rheological behaviour to cementitious composites through homogeneous magnetic fields	256-266
Han, Dahee / Kim, Woojae / Lee, Sangkyu / Kim, Hakyoung / Romero, Pedro	Assessment of gamma radiation shielding properties of concrete containers containing recycled coarse aggregates	122-138
Li, Zhuguo / Li, Sha	Carbonation resistance of fly ash and blast furnace slag based geopolymer concrete	668-680
Çınar, M. Emin / Kar, Filiz	Characterization of composite produced from waste PET and marble dust	734-741
Nguyen, Ngoc-Vinh / Pham, Thai-Hoan / Kim, Seung-Eock	Characterization of strain rate effects on the plastic properties of structural steel using nanoindentation	305-314
González-López, J. Rodrigo / Juárez-Alvarado, César A. / Ayub-Francis, Bárbara / Mendoza-Rangel, José Manuel	Compaction effect on the compressive strength and durability of stabilized earth blocks	179-188
Shaikh, Faiz Uddin Ahmed / Fairchild, Anthony / Zammar, Ronnie	Comparative strain and deflection hardening behaviour of polyethylene fibre reinforced ambient air and heat cured geopolymer composites	890-900
Chen, Fangjie / Baji, Hassan / Li, Chun-Qing	A comparative study on factors affecting time to cover cracking as a service life indicator	681-694
Xu, Linglin / Li, Nan / Wang, Ru / Wang, Peiming	A comprehensive study on the relationship between mechanical properties and microstructural development of calcium sulfoaluminate cement based self-leveling underlayments	225-234
Khorsandnia, Nima / Valipour, Hamid / Bradford, Mark	Deconstructable timber-concrete composite beams with panelised slabs: Finite element analysis	798-811
Weng, Yiwei / Li, Mingyang / Tan, Ming Jen / Qian, Shunzhi	Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model	600-610
Shivaprasad, K. N. / Das, B. B.	Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates	428-437
Assaad, Joseph Jean	Development and use of polymer-modified cement for adhesive and repair applications	139-148
Tufekci, M. Mansur / Gokce, Ahmet	Development of heavyweight high performance fiber reinforced cementitious composites (HPFRCC) – Part II: X-ray and gamma radiation shielding properties	326-336
Lei, Bin / Li, Wengui / Tang, Zhuo / Tam, Vivian W. Y. / Sun, Zhihui	Durability of recycled aggregate concrete under coupling mechanical loading and freeze-thaw cycle in salt-solution	840-849
Ortega-López, Vanesa / Fuente-Alonso, José A. / Santamaria, Amaia / San-José, José T. / Aragón, Ángel	Durability studies on fiber-reinforced EAF slag concrete for pavements	471-481
Alnahhal, Mohammed Fouad / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Alsubari, Belal / Alqedra, Mamoun A. / Mo, Kim Hung	Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials	482-495
Dareyni, Mohammad / Mohammadzadeh Moghaddam, Abolfazl / Delarami, Aref	Effect of cationic asphalt emulsion as an admixture on transport properties of roller-compacted concrete	724-733
Ming, Jing / Shi, Jinjie / Sun, Wei	Effect of mill scale on the long-term corrosion resistance of a low-alloy reinforcing steel in concrete subjected to chloride solution	508-517
Zhang, Junzhi / Bian, Fan / Zhang, Yurong / Fang, Zhaofeng / Fu, Chuanqing / Guo, Jie	Effect of pore structures on gas permeability and chloride diffusivity of concrete	402-413
Mei, Junpeng / Tan, Hongbo / Li, Hainan / Ma, Baoguo / Liu, Xiaohai / Jiang, Wenbin / Zhang, Ting / Li, Xin	Effect of sodium sulfate and nano-SiO2 on hydration and microstructure of cementitious materials containing high volume fly ash under steam curing	812-825
Wu, Xun / Li, Lulu / Li, Hui / Li, Baolei / Ling, Zhimin	Effect of strain level on corrosion of stainless steel bar	189-199
Zhang, Hai Yan / Kodur, Venkatesh / Wu, Bo / Yan, Jia / Yuan, Zhen Sheng	Effect of temperature on bond characteristics of geopolymer concrete	277-285
Hu, Jinxuan / Wu, Shaopeng / Liu, Quantao / García Hernández, Maria Inmaculada / Zeng, Wenbo	Effect of ultraviolet radiation on bitumen by different ageing procedures	73-79
Akand, Lutfur / Yang, Mijia / Wang, Xinnan	Effectiveness of chemical treatment on polypropylene fibers as reinforcement in pervious concrete	32-39
Mabry, Nehemiah J. / Seracino, Rudolf / Peters, Kara J.	The effects of accelerated Freeze-Thaw conditioning on CFRP strengthened concrete with pre-existing bond defects	286-295
Zou, Dinghua / Li, Kun / Li, Weidong / Li, Haiyan / Cao, Tianlu	Effects of pore structure and water absorption on internal curing efficiency of porous aggregates	949-959
Ren, G. M. / Wu, H. / Fang, Q. / Liu, J. Z.	Effects of steel fiber content and type on static mechanical properties of UHPCC	826-839
Tchakouté, Hervé K. / Fotio, Daniel / Rüscher, Claus H. / Kamseu, Elie / Djobo, Jean N. Y. / Bignozzi, Maria C. / Leonelli, Cristina	The effects of synthesized calcium phosphate compounds on the mechanical and microstructural properties of metakaolin-based geopolymer cements	776-792
Al-Sodani, Khaled A. Alawi / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed / Shameem, Mohammed	Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration	97-112
Behera, Promoda / Baheti, Vijay / Militky, Jiri / Louda, Petr	Elevated temperature properties of basalt microfibril filled geopolymer composites	850-860
Trujillo, David J. A. / Malkowska, Dominika	Empirically derived connection design properties for Guadua bamboo	9-20
Croce, Pietro / Marsili, Francesca / Klawonn, Frank / Formichi, Paolo / Landi, Filippo	Evaluation of statistical parameters of concrete strength from secondary experimental test data	343-359
Wang, Dawei / Liu, Pengfei / Xu, Huining / Kollmann, Jonas / Oeser, Markus	Evaluation of the polishing resistance characteristics of fine and coarse aggregate for asphalt pavement using Wehner/Schulze test	742-750
Blanco, A. / Cavalaro, S. H. P. / Segura, I. / Segura-Castillo, L. / Aguado, A.	Expansions with different origins in a concrete dam with bridge over spillway	861-874
Bahari, Ali / Sadeghi-Nik, Aref / Roodbari, Mandana / Sadeghi-Nik, Adel / Mirshafiei, Ebrahim	Experimental and theoretical studies of ordinary Portland cement composites contains nano LSCO perovskite with Fokker-Planck and chemical reaction equations	247-255
Liu, Hao / Xiao, Jieling / Wang, Ping / Liu, Ganzhong / Gao, Mingyuan / Li, Shaozheng	Experimental investigation of the characteristics of a granular ballast bed under cyclic longitudinal loading	214-224
Aydın, Ferhat	Experimental investigation of thermal expansion and concrete strength effects on FRP bars behavior embedded in concrete	1-8
Liu, Tiejun / Qin, Shanshan / Zou, Dujian / Song, Wen	Experimental investigation on the durability performances of concrete using cathode ray tube glass as fine aggregate under chloride ion penetration or sulfate attack	634-642
Muñoz, Rosana / Lourenço, Paulo B. / Moreira, Susana	Experimental results on mechanical behaviour of metal anchors in historic stone masonry	643-655
Vu, Van Thang / Chupin, Olivier / Piau, Jean-Michel / Hammoum, Ferhat / Bouron, Stephane	Experimental study and modeling of the behavior of partially saturated asphalt concrete under freezing condition	169-178
Knox, C. L. / Dizhur, D. / Ingham, J. M.	Experimental study on scale effects in clay brick masonry prisms and wall panels investigating compression and shear related properties	706-713
Ling, S. K. / Kwan, A. K. H.	Filler technology for low-carbon high-dimensional stability concrete	87-96
Jawdhari, A. / Harik, I.	Finite element analysis of RC beams strengthened in flexure with CFRP rod panels	751-766
Wastiels, Jan / Van Ackeren, Johan / Tysmans, Tine / Van Paepegem, Wim	Flexural impact response of textile reinforced inorganic phosphate cement composites (TRC)	296-304
Imanzadeh, S. / Hibouche, A. / Jarno, A. / Taïbi, S.	Formulating and optimizing the compressive strength of a raw earth concrete by mixture design	149-159
Abd Elmoaty, Abd Elmoaty M.	Four-years carbonation and chloride induced steel corrosion of sulfate-contaminated aggregates concrete	539-556
Matalkah, Faris / Soroushian, Parviz	Freeze thaw and deicer salt scaling resistance of concrete prepared with alkali aluminosilicate cement	200-213
Peng, Bin / Wang, Dongdong / Zong, Gang / Zhang, Yumei	Homogenization strategy for brick masonry walls under in-plane loading	656-667
Chhun, Ponleu / Sellier, Alain / Lacarrière, Laurie / Chataigner, Sylvain / Gaillet, Laurent	Incremental modeling of relaxation of prestressing wires under variable loading and temperature	337-342
Müller, Torsten / Krämer, Christina / Pritzel, Christian / Bornemann, Rainer / Kowald, Torsten L. / Trettin, Reinhard H. F. / Bolívar, Peter Haring	Influence of cocamidopropyl betaine on the formation and carbonation of portlandite – A microscopy study	793-797
Mohammed, Monketh / Parry, Tony / Grenfell, James (J R. A. ).	Influence of fibres on rheological properties and toughness of bituminous binder	901-911
Hashemi, M. J. / Jamshidi, M. / Aghdam, J. Hassanpour	Investigating fracture mechanics and flexural properties of unsaturated polyester polymer concrete (UP-PC)	767-775
Xu, Jinzhi / Hao, Peiwen / Zhang, Depeng / Yuan, Gaoang	Investigation of reclaimed asphalt pavement blending efficiency based on micro-mechanical properties of layered asphalt binders	390-401
Scribot, Cyril / Maherzi, Walid / Benzerzour, Mahfoud / Mamindy-Pajany, Yannick / Abriak, Nor-Edine	A laboratory-scale experimental investigation on the reuse of a modified red mud in ceramic materials production	21-31
Ramezanianpour, Ali Akbar / Moeini, Mohammad Amin	Mechanical and durability properties of alkali activated slag coating mortars containing nanosilica and silica fume	611-621
Tabatabai, Habib / Janbaz, Morteza / Nabizadeh, Azam	Mechanical and thermo-gravimetric properties of unsaturated polyester resin blended with FGD gypsum	438-445
Bui, Ngoc Kien / Satomi, Tomoaki / Takahashi, Hiroshi	Mechanical properties of concrete containing 100% treated coarse recycled concrete aggregate	496-507
Hu, Hang / Papastergiou, Panos / Angelakopoulos, Harris / Guadagnini, Maurizio / Pilakoutas, Kypros	Mechanical properties of SFRC using blended manufactured and recycled tyre steel fibres	376-389
Bishnoi, Shashank / Joseph, Shiju / Kaur, Amarpreet	Microstructural modelling of the strength of mortars containing fly ash using µic	912-920
Abdulkareem, Omar M. / Ben Fraj, Amor / Bouasker, Marwen / Khelidj, Abdelhafid	Mixture design and early age investigations of more sustainable UHPC	235-246
Lee, Changgil / Park, Seunghee / Bolander, John E. / Pyo, Sukhoon	Monitoring the hardening process of ultra high performance concrete using decomposed modes of guided waves	267-276
Lu, Zeyu / Hanif, Asad / Lu, Cong / Liu, Kaiju / Sun, Guoxing / Li, Zongjin	A novel lightweight cementitious composite with enhanced thermal insulation and mechanical properties by extrusion technique	446-449
Deng, Jun / Li, Junhui / Wang, Yi / Xie, Weizhi	Numerical study on notched steel beams strengthened by CFRP plates	622-633
She, Wei / Zhao, Guotang / Cai, Degou / Jiang, Jinyang / Cao, Xiaoyu	Numerical study on the effect of pore shapes on the thermal behaviors of cellular concrete	113-121
Zuo, Wenqiang / Liu, Jiaping / Tian, Qian / Xu, Wen / She, Wei / Feng, Pan / Miao, Changwen	Optimum design of low-binder Self-Compacting Concrete based on particle packing theories	938-948
Liu, Kefei / Zhang, Kun / Shi, Xianming	Performance evaluation and modification mechanism analysis of asphalt binders modified by graphene oxide	880-889
Bedon, Chiara / Zhang, Xihong / Santos, Filipe / Honfi, Dániel / Kozłowski, Marcin / Arrigoni, Michel / Figuli, Lucia / Lange, David	Performance of structural glass facades under extreme loads – Design methods, existing research, current issues and trends	921-937
Zhu, Cong / Zhang, Jianxin / Peng, Jiahui / Cao, Wenxiang / Liu, Jiangsen	Physical and mechanical properties of gypsum-based composites reinforced with PVA and PP fibers	695-705
Sena da Fonseca, B. / Ferreira Pinto, A. P. / Piçarra, S. / Montemor, M. F.	The potential action of single functionalization treatments and combined treatments for the consolidation of carbonate stones	586-599
Luo, Yang / Zheng, Shili / Ma, Shuhua / Liu, Chunli / Wang, Xiaohui	Preparation of sintered foamed ceramics derived entirely from coal fly ash	529-538
Li, Wei / Hong, Jinxiang / Zhu, Xiaobin / Yang, Dingyi / Bai, Yun / Liu, Jiaping / Miao, Changwen	Retardation mechanism of anionic asphalt emulsion on the hydration of Portland cement	714-723
Chen, Yuchi / Wang, Teng / Zhou, Min / Hou, Haobo / Xue, Yongjie / Wang, Hao	Rice husk and sewage sludge co-combustion ash: Leaching behavior analysis and cementitious property	63-72
Liu, Ping / Hu, Dean / Wu, Qiankun / Liu, Xuemei	Sensitivity and uncertainty analysis of interfacial effect in SHPB tests for concrete-like materials	414-427
Vieira, Darli Rodrigues / Moreira, Adrianne Lúcia Ribeiro / Calmon, João Luiz / Dominicini, Wagner Klippel	Service life modeling of a bridge in a tropical marine environment for durable design	315-325
Wang, Sihao / He, Jun / Liu, Yuqing / Li, Chuanxi / Xin, Haohui	Shear capacity of a novel joint between corrugated steel web and concrete lower slab	360-375
Pastor, José L. / Ortega, J. Marcos / Climent, Miguel A. / Sánchez, Isidro	Skin friction coefficient change on cement grouts for micropiles due to sulfate attack	80-86
Ruano, Gonzalo / Isla, Facundo / Luccioni, Bibiana / Zerbino, Raul / Giaccio, Graciela	Steel fibers pull-out after exposure to high temperatures and its contribution to the residual mechanical behavior of high strength concrete	571-585
Sajid, Sikandar H. / Ali, Syed M. / Carino, Nicholas J. / Saeed, Salman / Sajid, Hizb Ullah / Chouinard, Luc	Strength estimation of concrete masonry units using stress-wave methods	518-528
Zhao, Yan-Ru / Wang, Lei / Lei, Zhen-Kun / Han, Xiao-Feng / Shi, Jin-Na	Study on bending damage and failure of basalt fiber reinforced concrete under freeze-thaw cycles	460-470
Li, Ming / Xie, Dongbo / Shu, Qiugui / Ou, Hongjuan / Guo, Xiaoyang	Study on sodium fatty alcohol polyoxyethyleneether sulfate relieve the contamination of oil well cement with mineral oil-based drilling fluids	450-459
Rajhans, Puja / Panda, Sarat Kumar / Nayak, Sanket	Sustainable self compacting concrete from C&D waste by improving the microstructures of concrete ITZ	557-570
Badache, Abdelhak / Benosman, Ahmed Soufiane / Senhadji, Yassine / Mouli, Mohamed	Thermo-physical and mechanical characteristics of sand-based lightweight composite mortars with recycled high-density polyethylene (HDPE)	40-52
Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa / Mesbah, Habib A. / Hossain, Khandaker M. Anwar	Use of recycled glass powder to improve the performance properties of high volume fly ash-engineered cementitious composites	53-62
Bigdeli, Yasser / Barbato, Michele / Gutierrez-Wing, Maria Teresa / Lofton, Charles D.	Use of slurry fluorogypsum (FG) with controlled pH-adjustment in FG-based blends	160-168

Informations
sur cette fiche
IssueID
35502
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - février 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - février 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.