Construction and Building Materials - March 2018

Published:	March 2018

Articles in this Issue

Author(s)	Title	Page(s)
Asprone, Domenico / Auricchio, Ferdinando / Menna, Costantino / Mercuri, Valentina	3D printing of reinforced concrete elements: Technology and design approach	218-231
Pyo, Sukhoon / Abate, Selamu Yihune / Kim, Hyeong-Ki	Abrasion resistance of ultra high performance concrete incorporating coarser aggregate	11-16
Andreev, K. / Shetty, N. / Verstrynge, E.	Acoustic emission based damage limits and their correlation with fatigue resistance of refractory masonry	639-646
Hong, Bin / Xian, Guijun	Ageing of a thermosetting polyurethane and its pultruded carbon fiber plates subjected to seawater immersion	514-522
Coopamootoo, Kumaran / Masoero, Enrico	Cement pastes with UV-irradiated polypropylene: Fracture energy and the benefit of adding metakaolin	303-309
Hosen, Md. Akter / Jumaat, Mohd Zamin / Alengaram, U. Johnson / Ramli Sulong, N. H.	CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique	28-44
Zhang, Yuliang / Sun, Qiang / Yang, Xiuyuan	Changes in color and thermal properties of fly ash cement mortar after heat treatment	72-81
Choi, So Yeong / Choi, Yoon Suk / Yang, Eun Ik	Characteristics of volume change and heavy metal leaching in mortar specimens recycled heavyweight waste glass as fine aggregate	424-433
Nguyen, Phi Long / Vu, Xuan Hong / Ferrier, Emmanuel	Characterization of pultruded carbon fibre reinforced polymer (P-CFRP) under two elevated temperature-mechanical load cases: Residual and thermo-mechanical regimes	395-412
Thomas, R. J. / Ariyachandra, Erandi / Lezama, Diego / Peethamparan, Sulapha	Comparison of chloride permeability methods for Alkali-Activated concrete	104-111
Petkune, Natalja / Donchev, Ted / Hadavinia, Homayoun / Wertheim, David / Limbachiya, Mukesh	Comparison of the behaviour of steel, pure FRP and hybrid shear walls under cyclic seismic loading in aspect of stiffness degradation and energy absorption	621-630
Carneiro, José Ricardo / Morais, Miguel / de Lurdes Lopes, Maria	Degradation of polypropylene geotextiles with different chemical stabilisations in marine environments	877-886
Shi, Caijun / Jiao, Dengwu / Zhang, Jian / Wang, Dehui / Zhang, Yongjian / Farzadnia, Nima / Hu, Xiang	Design of high performance concrete with multiple performance requirements for #2 Dongting Lake Bridge	825-832
Ashish, Prabin Kumar / Singh, Dharamveer	Development of empirical model for predicting G∗/Sinδ and viscosity value for nanoclay and Carbon Nano Tube modified asphalt binder	363-371
Wan, Kai Tai / Zhu, Honggang / Yuen, Terry Y. P. / Chen, Binmeng / Hu, Chuanlin / Leung, Christopher K. Y. / Kuang, Jun Shang	Development of low drying shrinkage foamed concrete and hygro-mechanical finite element model for prefabricated building fasçade applications	939-957
Tang, Junwu / Cheng, Hua / Zhang, Qibin / Chen, Wei / Li, Qiu	Development of properties and microstructure of concrete with coral reef sand under sulphate attack and drying-wetting cycles	647-654
Yu, Kequan / Li, Lingzhi / Yu, Jiangtao / Wang, Yichao / Ye, Junhong / Xu, Qingfeng	Direct tensile properties of engineered cementitious composites: A review	346-362
Angius, Ezequiel / Ding, Haibo / Hesp, Simon A. M.	Durability assessment of asphalt binder	264-271
Samimi, Kianoosh / Kamali-Bernard, Siham / Maghsoudi, Ali Akbar	Durability of self-compacting concrete containing pumice and zeolite against acid attack, carbonation and marine environment	247-263
Nie, Liangxue / Xu, Jinyu / Bai, Erlei	Dynamic stress-strain relationship of concrete subjected to chloride and sulfate attack	232-240
Hani, Nadine / Nawawy, Omar / Ragab, Khaled S. / Kohail, Mohamed	The effect of different water/binder ratio and nano-silica dosage on the fresh and hardened properties of self-compacting concrete	504-513
Tavasoli, Syamak / Nili, Mahmoud / Serpoush, Behrad	Effect of GGBS on the frost resistance of self-consolidating concrete	717-722
Patel, Ravi A. / Perko, Janez / Jacques, Diederik / De Schutter, Geert / Ye, Guang / Van Bruegel, Klaas	Effective diffusivity of cement pastes from virtual microstructures: Role of gel porosity and capillary pore percolation	833-845
Lu, Zeguang / Wang, Meng / Jia, Wanda	Effects of cold press time on compressive strength, deformation rates and soaked properties of biomass brick	761-768
Abaeian, Reza / Pesaran Behbahani, Hamid / Moslem, Shahram Jalali	Effects of high temperatures on mechanical behavior of high strength concrete reinforced with high performance synthetic macro polypropylene (HPP) fibres	631-638
Liu, Sifeng / Kong, Yaning / Wan, Tingting / Zhao, Guorong	Effects of thermal-cooling cycling curing on the mechanical properties of EVA-modified concrete	443-450
Park, Hyeong Min / Kim, G. M. / Lee, Sol Yi / Jeon, Haemin / Kim, Seong Yun / Kim, Minkook / Kim, Jae Woo / Jung, Yong Chae / Yang, B. J.	Electrical resistivity reduction with pitch-based carbon fiber into multi-walled carbon nanotube (MWCNT)-embedded cement composites	484-493
Liu, Hanqi / Luo, Rong / Lv, Huijie	Establishing continuous relaxation spectrum based on complex modulus tests to construct relaxation modulus master curves in compliance with linear viscoelastic theory	372-384
Pfingsten, Johannes / Rickert, Joerg / Lipus, Klaus	Estimation of the content of ground granulated blast furnace slag and different pozzolanas in hardened concrete	931-938
Dundu, Morgan	Evolution of stress–strain models of stainless steel in structural engineering applications	413-423
Yin, Shenghua / Shao, Yajian / Wu, Aixiang / Wang, Yiming / Chen, Xun	Expansion and strength properties of cemented backfill using sulphidic mill tailings	138-148
Khooshechin, Maryam / Tanzadeh, Javad	Experimental and mechanical performance of shotcrete made with nanomaterials and fiber reinforcement	199-205
Wang, Xiao-hua / Zhang, She-rong / Wang, Chao / Song, Ran / Shang, Chao / Fang, Xin	Experimental investigation of the size effect of layered roller compacted concrete (RCC) under high-strain-rate loading	45-57
Falliano, Devid / De Domenico, Dario / Ricciardi, Giuseppe / Gugliandolo, Ernesto	Experimental investigation on the compressive strength of foamed concrete: Effect of curing conditions, cement type, foaming agent and dry density	735-749
Feng, Wanhui / Liu, Feng / Yang, Fei / Li, Lijuan / Jing, Lin	Experimental study on dynamic split tensile properties of rubber concrete	675-687
Ozturk, Murat / Akgol, Oguzhan / Sevim, Umur Korkut / Karaaslan, Muharrem / Demirci, Mustafa / Unal, Emin	Experimental work on mechanical, electromagnetic and microwave shielding effectiveness properties of mortar containing electric arc furnace slag	58-63
Tosti, Fabio / Bianchini Ciampoli, Luca / D'Amico, Fabrizio / Alani, Amir M. / Benedetto, Andrea	An experimental-based model for the assessment of the mechanical properties of road pavements using ground-penetrating radar	966-974
Wei, Linzhuo / Wang, Yichao / Yu, Jiangtao / Xiao, Jianzhuang / Xu, Shilang	Feasibility study of strain hardening magnesium oxychloride cement-based composites	750-760
Abd El Fattah, Ahmed / Al-Duais, Ibrahim / Riding, Kyle / Thomas, Michael	Field evaluation of corrosion mitigation on reinforced concrete in marine exposure conditions	663-674
Chen, Yong-hui / Zhang, Wan-lu / Zhao, Lun-Yang / Peng, Zhong-hao	Field in-situ stabilization of bored pile mud: Engineering properties and application for pavement	541-547
Chen, Yu / Feng, Ran / Gong, Wenzhi	Flexural behavior of concrete-filled aluminum alloy circular hollow section tubes	173-186
Kim, Taehwan / Davis, Jeffrey M. / Ley, M. Tyler / Kang, Shinhyu / Amrollahi, Pouya	Fly ash particle characterization for predicting concrete compressive strength	560-571
Ding, Yao / Dai, Jian-Guo / Shi, Cai-Jun	Fracture properties of alkali-activated slag and ordinary Portland cement concrete and mortar	310-320
Leijten, A. J. M.	A general bearing deformation model for timber	707-716
Valencia-Saavedra, William / Mejía de Gutiérrez, Ruby / Gordillo, Marisol	Geopolymeric concretes based on fly ash with high unburned content	697-706
Yankelevsky, D. Z. / Karinski, Y. S. / Zhutovsky, S. / Feldgun, V. R.	High-pressure uniaxial confined compression tests of mortars	523-532
Wood, D. / Vailati, C. / Menges, A. / Rüggeberg, M.	Hygroscopically actuated wood elements for weather responsive and self-forming building parts – Facilitating upscaling and complex shape changes	782-791
Fang, Yuan / Chen, Pu / Huo, Ruili / Liang, Yajie / Wang, Lu / Liu, Weiqing	Hygrothermal ageing of polymeric sandwich structures used in structural engineering	812-824
Chewe Ngapeya, Gelen Gaël / Waldmann, Danièle / Scholzen, Franck	Impact of the height imperfections of masonry blocks on the load bearing capacity of dry-stack masonry walls	898-913
Saxena, Shekhar / Tembhurkar, A. R.	Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concrete	126-137
Tan, Hongbo / Zhang, Xun / Guo, Yulin / Ma, Baoguo / Jian, Shouwei / He, Xingyang / Zhi, Zhenzhen / Liu, Xiaohai	Improvement in fluidity loss of magnesia phosphate cement by incorporating polycarboxylate superplasticizer	887-897
González, Francisco / Fernández, Jaime / Agranati, Galit / Villanueva, Paula	Influence of construction conditions on strength of post installed bonded anchors	272-283
Massana, Jordi / Reyes, Encarnación / Bernal, Jesús / León, Néstor / Sánchez-Espinosa, Elvira	Influence of nano- and micro-silica additions on the durability of a high-performance self-compacting concrete	93-103
Abate, Selamu Yihune / Song, Keum-Il / Song, Jin-Kyu / Lee, Bang Yeon / Kim, Hyeong-Ki	Internal curing effect of raw and carbonated recycled aggregate on the properties of high-strength slag-cement mortar	64-71
Liu, Ya / Zhang, Jing / Jiang, Yongjia / Li, Chenxuan / Xi, Zhonghua / Cai, Jun / Xie, Hongfeng	Investigation of secondary phase separation and mechanical properties of epoxy SBS-modified asphalts	163-172
Li, Yuanyuan / Wu, Shaopeng / Amirkhanian, Serji	Investigation of the graphene oxide and asphalt interaction and its effect on asphalt pavement performance	572-584
Basha Nusrath Unnisa, Chan / Nirmala Devi, Gowraraju / Hemapriya, Venkatesan / Chitra, Subramanian / Chung, Ill-Min / Kim, Seung-Hyun / Prabakaran, Mayakrishnan	Linear polyesters as effective corrosion inhibitors for steel rebars in chloride induced alkaline medium – An electrochemical approach	866-876
Yang, Lu / Gao, Yang / Shi, Gang / Wang, Xun / Bai, Yu	Low cycle fatigue property and fracture behavior of low yield point steels	688-696
Ai, Demi / Zhu, Hongping / Luo, Hui / Wang, Chao	Mechanical impedance based embedded piezoelectric transducer for reinforced concrete structural impact damage detection: A comparative study	472-483
Nepomuceno, Miguel C. S. / Isidoro, Rui A. S. / Catarino, José P. G.	Mechanical performance evaluation of concrete made with recycled ceramic coarse aggregates from industrial brick waste	284-294
Saeedi Javadi, Armin / Badiee, Hassan / Sabermahani, Mohsen	Mechanical properties and durability of bio-blocks with recycled concrete aggregates	859-865
Liang, Xiangwei / Wu, Chengqing	Meso-scale modelling of steel fibre reinforced concrete with high strength	187-198
Zhou, Rongxin / Lu, Yong	A mesoscale interface approach to modelling fractures in concrete for material investigation	608-620
Xu, Peijun / Zhu, Xingtian / Cong, Peiliang / Du, Xiaoming / Zhang, Ru	Modification of alkyl group terminated hyperbranched polyester on paving epoxy asphalt	295-302
Ameri, Mahmoud / Vamegh, Mostafa / Chavoshian Naeni, Seyed Farhad / Molayem, Mohammad	Moisture susceptibility evaluation of asphalt mixtures containing Evonik, Zycotherm and hydrated lime	958-965
Chen, Changhong / Zhang, Qian / Keer, Leon M. / Yao, Yao / Huang, Ying	The multi-factor effect of tensile strength of concrete in numerical simulation based on the Monte Carlo random aggregate distribution	585-595
Fernández-Fanjul, Avelino / Tenza-Abril, Antonio José / Baeza-Brotons, Francisco	A new methodology for determining water absorption of lightweight, normal-weight and heavyweight aggregates in a viscous medium	596-607
Wang, Lei / Zou, Fuliao / Fang, Xiaoliang / Tsang, Daniel C. W. / Poon, Chi Sun / Leng, Zhen / Baek, Kitae	A novel type of controlled low strength material derived from alum sludge and green materials	792-800
Kariou, F. A. / Triantafyllou, S. P. / Bournas, D. A. / Koutas, L. N.	Out-of-plane response of masonry walls strengthened using textile-mortar system	769-781
Hou, Dianhao / Han, Meizhao / Muhammad, Yaseen / Liu, Yu / Zhang, Fenglei / Yin, Yuhua / Duan, Shaochan / Li, Jing	Performance evaluation of modified asphalt based trackless tack coat materials	385-394
Dubois, V. / Leblanc, A. / Carpentier, O. / Alhaik, G. / Wirquin, E.	Performances of flax shive-based lightweight composites with rapid hardening	17-27
Wang, X. F. / Zhang, J. H. / Zhao, W. / Han, R. / Han, N. X. / Xing, F.	Permeability and pore structure of microcapsule-based self-healing cementitious composite	149-162
Davraz, Metin / Ceylan, Hakan / Topçu, İlker Bekir / Uygunoğlu, Tayfun	Pozzolanic effect of andesite waste powder on mechanical properties of high strength concrete	494-503
Wang, Rui / Ren, Miao / Gao, Xiaojian / Qin, Ling	Preparation and properties of fatty acids based thermal energy storage aggregate concrete	1-10
Alvarez, Allex E. / Mora, Juan C. / Espinosa, Leidy V.	Quantification of stone-on-stone contact in permeable friction course mixtures based on image analysis	462-471
Sharma, Krishneel K. / Deo, Ravin N. / Kumar, Ajal / Mamun, Kabir	Rebar corrosion due to chlorides in synergy with sodium, potassium, and magnesium	533-540
Penellum, Matthew / Sharma, Bhavna / Shah, Darshil U. / Foster, Robert M. / Ramage, Michael H.	Relationship of structure and stiffness in laminated bamboo composites	241-246
Gao, Xifeng / Zhang, Xupeng / Liu, Hongbo / Chen, Zhihua / Li, Hongqiang	Residual mechanical properties of stainless steels S30408 and S31608 after fire exposure	82-92
Gamerro, Julien / Robeller, Christopher / Weinand, Yves	Rotational mechanical behaviour of wood-wood connections with application to double-layered folded timber-plate structure	434-442
Nguyễn, Huy Hoàng / Choi, Jeong-Il / Song, Keum-Il / Song, Jin-Kyu / Huh, Jungwon / Lee, Bang Yeon	Self-healing properties of cement-based and alkali-activated slag-based fiber-reinforced composites	801-811
Sore, Seick Omar / Messan, Adamah / Prud'homme, Elodie / Escadeillas, Gilles / Tsobnang, François	Stabilization of compressed earth blocks (CEBs) by geopolymer binder based on local materials from Burkina Faso	333-345
Geraldo, Rodrigo H. / Teixeira, Otacisio G. / Matos, Samile R. C. / Silva, Francisco G. S. / Gonçalves, Jardel P. / Camarini, Gladis	Study of alkali-activated mortar used as conventional repair in reinforced concrete	914-919
Vassaux, S. / Gaudefroy, V. / Boulangé, L. / Soro, L. Jean / Pévère, A. / Michelet, A. / Barragan-Montero, V. / Mouillet, V.	Study of remobilization phenomena at reclaimed asphalt binder/virgin binder interphases for recycled asphalt mixtures using novel microscopic methodologies	846-858
Gao, Yingli / He, Bei / Xiao, Minqiang / Fang, Zaosheng / Dai, Kaiming	Study on properties and mechanisms of luminescent cement-based pavement materials with super-hydrophobic function	548-559
Xargay, Hernán / Folino, Paula / Sambataro, Luciano / Etse, Guillermo	Temperature effects on failure behavior of self-compacting high strength plain and fiber reinforced concrete	723-734
Shen, Dejian / Jiang, Jinliang / Zhang, Mingyue / Yao, Panpan / Jiang, Guoqing	Tensile creep and cracking potential of high performance concrete internally cured with super absorbent polymers at early age	451-461
Murmu, Anant L. / Patel, A.	Towards sustainable bricks production: An overview	112-125
Amiri, Ali / Bundur, Zeynep Başaran	Use of corn-steep liquor as an alternative carbon source for biomineralization in cement-based materials and its impact on performance	655-662
Hassine, Mohamed Ahmed / Beck, Kévin / Brunetaud, Xavier / Al-Mukhtar, Muzahim	Use of electrical resistance measurement to assess the water saturation profile in porous limestones during capillary imbibition	206-217
Kabeer, K. I. Syed Ahmed / Vyas, Ashok Kumar	Utilization of marble powder as fine aggregate in mortar mixes	321-332
Luo, Rong / Liu, Ziyao / Huang, Tingting / Tu, Chongzhi	Water vapor passing through asphalt mixtures under different relative humidity differentials	920-930

About this
data sheet
IssueID
35500
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.