Construction and Building Materials - mars 2018

Publié:	mars 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Asprone, Domenico / Auricchio, Ferdinando / Menna, Costantino / Mercuri, Valentina	3D printing of reinforced concrete elements: Technology and design approach	218-231
Pyo, Sukhoon / Abate, Selamu Yihune / Kim, Hyeong-Ki	Abrasion resistance of ultra high performance concrete incorporating coarser aggregate	11-16
Andreev, K. / Shetty, N. / Verstrynge, E.	Acoustic emission based damage limits and their correlation with fatigue resistance of refractory masonry	639-646
Hong, Bin / Xian, Guijun	Ageing of a thermosetting polyurethane and its pultruded carbon fiber plates subjected to seawater immersion	514-522
Coopamootoo, Kumaran / Masoero, Enrico	Cement pastes with UV-irradiated polypropylene: Fracture energy and the benefit of adding metakaolin	303-309
Hosen, Md. Akter / Jumaat, Mohd Zamin / Alengaram, U. Johnson / Ramli Sulong, N. H.	CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique	28-44
Zhang, Yuliang / Sun, Qiang / Yang, Xiuyuan	Changes in color and thermal properties of fly ash cement mortar after heat treatment	72-81
Choi, So Yeong / Choi, Yoon Suk / Yang, Eun Ik	Characteristics of volume change and heavy metal leaching in mortar specimens recycled heavyweight waste glass as fine aggregate	424-433
Nguyen, Phi Long / Vu, Xuan Hong / Ferrier, Emmanuel	Characterization of pultruded carbon fibre reinforced polymer (P-CFRP) under two elevated temperature-mechanical load cases: Residual and thermo-mechanical regimes	395-412
Thomas, R. J. / Ariyachandra, Erandi / Lezama, Diego / Peethamparan, Sulapha	Comparison of chloride permeability methods for Alkali-Activated concrete	104-111
Petkune, Natalja / Donchev, Ted / Hadavinia, Homayoun / Wertheim, David / Limbachiya, Mukesh	Comparison of the behaviour of steel, pure FRP and hybrid shear walls under cyclic seismic loading in aspect of stiffness degradation and energy absorption	621-630
Carneiro, José Ricardo / Morais, Miguel / de Lurdes Lopes, Maria	Degradation of polypropylene geotextiles with different chemical stabilisations in marine environments	877-886
Shi, Caijun / Jiao, Dengwu / Zhang, Jian / Wang, Dehui / Zhang, Yongjian / Farzadnia, Nima / Hu, Xiang	Design of high performance concrete with multiple performance requirements for #2 Dongting Lake Bridge	825-832
Ashish, Prabin Kumar / Singh, Dharamveer	Development of empirical model for predicting G∗/Sinδ and viscosity value for nanoclay and Carbon Nano Tube modified asphalt binder	363-371
Wan, Kai Tai / Zhu, Honggang / Yuen, Terry Y. P. / Chen, Binmeng / Hu, Chuanlin / Leung, Christopher K. Y. / Kuang, Jun Shang	Development of low drying shrinkage foamed concrete and hygro-mechanical finite element model for prefabricated building fasçade applications	939-957
Tang, Junwu / Cheng, Hua / Zhang, Qibin / Chen, Wei / Li, Qiu	Development of properties and microstructure of concrete with coral reef sand under sulphate attack and drying-wetting cycles	647-654
Yu, Kequan / Li, Lingzhi / Yu, Jiangtao / Wang, Yichao / Ye, Junhong / Xu, Qingfeng	Direct tensile properties of engineered cementitious composites: A review	346-362
Angius, Ezequiel / Ding, Haibo / Hesp, Simon A. M.	Durability assessment of asphalt binder	264-271
Samimi, Kianoosh / Kamali-Bernard, Siham / Maghsoudi, Ali Akbar	Durability of self-compacting concrete containing pumice and zeolite against acid attack, carbonation and marine environment	247-263
Nie, Liangxue / Xu, Jinyu / Bai, Erlei	Dynamic stress-strain relationship of concrete subjected to chloride and sulfate attack	232-240
Hani, Nadine / Nawawy, Omar / Ragab, Khaled S. / Kohail, Mohamed	The effect of different water/binder ratio and nano-silica dosage on the fresh and hardened properties of self-compacting concrete	504-513
Tavasoli, Syamak / Nili, Mahmoud / Serpoush, Behrad	Effect of GGBS on the frost resistance of self-consolidating concrete	717-722
Patel, Ravi A. / Perko, Janez / Jacques, Diederik / De Schutter, Geert / Ye, Guang / Van Bruegel, Klaas	Effective diffusivity of cement pastes from virtual microstructures: Role of gel porosity and capillary pore percolation	833-845
Lu, Zeguang / Wang, Meng / Jia, Wanda	Effects of cold press time on compressive strength, deformation rates and soaked properties of biomass brick	761-768
Abaeian, Reza / Pesaran Behbahani, Hamid / Moslem, Shahram Jalali	Effects of high temperatures on mechanical behavior of high strength concrete reinforced with high performance synthetic macro polypropylene (HPP) fibres	631-638
Liu, Sifeng / Kong, Yaning / Wan, Tingting / Zhao, Guorong	Effects of thermal-cooling cycling curing on the mechanical properties of EVA-modified concrete	443-450
Park, Hyeong Min / Kim, G. M. / Lee, Sol Yi / Jeon, Haemin / Kim, Seong Yun / Kim, Minkook / Kim, Jae Woo / Jung, Yong Chae / Yang, B. J.	Electrical resistivity reduction with pitch-based carbon fiber into multi-walled carbon nanotube (MWCNT)-embedded cement composites	484-493
Liu, Hanqi / Luo, Rong / Lv, Huijie	Establishing continuous relaxation spectrum based on complex modulus tests to construct relaxation modulus master curves in compliance with linear viscoelastic theory	372-384
Pfingsten, Johannes / Rickert, Joerg / Lipus, Klaus	Estimation of the content of ground granulated blast furnace slag and different pozzolanas in hardened concrete	931-938
Dundu, Morgan	Evolution of stress–strain models of stainless steel in structural engineering applications	413-423
Yin, Shenghua / Shao, Yajian / Wu, Aixiang / Wang, Yiming / Chen, Xun	Expansion and strength properties of cemented backfill using sulphidic mill tailings	138-148
Khooshechin, Maryam / Tanzadeh, Javad	Experimental and mechanical performance of shotcrete made with nanomaterials and fiber reinforcement	199-205
Wang, Xiao-hua / Zhang, She-rong / Wang, Chao / Song, Ran / Shang, Chao / Fang, Xin	Experimental investigation of the size effect of layered roller compacted concrete (RCC) under high-strain-rate loading	45-57
Falliano, Devid / De Domenico, Dario / Ricciardi, Giuseppe / Gugliandolo, Ernesto	Experimental investigation on the compressive strength of foamed concrete: Effect of curing conditions, cement type, foaming agent and dry density	735-749
Feng, Wanhui / Liu, Feng / Yang, Fei / Li, Lijuan / Jing, Lin	Experimental study on dynamic split tensile properties of rubber concrete	675-687
Ozturk, Murat / Akgol, Oguzhan / Sevim, Umur Korkut / Karaaslan, Muharrem / Demirci, Mustafa / Unal, Emin	Experimental work on mechanical, electromagnetic and microwave shielding effectiveness properties of mortar containing electric arc furnace slag	58-63
Tosti, Fabio / Bianchini Ciampoli, Luca / D'Amico, Fabrizio / Alani, Amir M. / Benedetto, Andrea	An experimental-based model for the assessment of the mechanical properties of road pavements using ground-penetrating radar	966-974
Wei, Linzhuo / Wang, Yichao / Yu, Jiangtao / Xiao, Jianzhuang / Xu, Shilang	Feasibility study of strain hardening magnesium oxychloride cement-based composites	750-760
Abd El Fattah, Ahmed / Al-Duais, Ibrahim / Riding, Kyle / Thomas, Michael	Field evaluation of corrosion mitigation on reinforced concrete in marine exposure conditions	663-674
Chen, Yong-hui / Zhang, Wan-lu / Zhao, Lun-Yang / Peng, Zhong-hao	Field in-situ stabilization of bored pile mud: Engineering properties and application for pavement	541-547
Chen, Yu / Feng, Ran / Gong, Wenzhi	Flexural behavior of concrete-filled aluminum alloy circular hollow section tubes	173-186
Kim, Taehwan / Davis, Jeffrey M. / Ley, M. Tyler / Kang, Shinhyu / Amrollahi, Pouya	Fly ash particle characterization for predicting concrete compressive strength	560-571
Ding, Yao / Dai, Jian-Guo / Shi, Cai-Jun	Fracture properties of alkali-activated slag and ordinary Portland cement concrete and mortar	310-320
Leijten, A. J. M.	A general bearing deformation model for timber	707-716
Valencia-Saavedra, William / Mejía de Gutiérrez, Ruby / Gordillo, Marisol	Geopolymeric concretes based on fly ash with high unburned content	697-706
Yankelevsky, D. Z. / Karinski, Y. S. / Zhutovsky, S. / Feldgun, V. R.	High-pressure uniaxial confined compression tests of mortars	523-532
Wood, D. / Vailati, C. / Menges, A. / Rüggeberg, M.	Hygroscopically actuated wood elements for weather responsive and self-forming building parts – Facilitating upscaling and complex shape changes	782-791
Fang, Yuan / Chen, Pu / Huo, Ruili / Liang, Yajie / Wang, Lu / Liu, Weiqing	Hygrothermal ageing of polymeric sandwich structures used in structural engineering	812-824
Chewe Ngapeya, Gelen Gaël / Waldmann, Danièle / Scholzen, Franck	Impact of the height imperfections of masonry blocks on the load bearing capacity of dry-stack masonry walls	898-913
Saxena, Shekhar / Tembhurkar, A. R.	Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concrete	126-137
Tan, Hongbo / Zhang, Xun / Guo, Yulin / Ma, Baoguo / Jian, Shouwei / He, Xingyang / Zhi, Zhenzhen / Liu, Xiaohai	Improvement in fluidity loss of magnesia phosphate cement by incorporating polycarboxylate superplasticizer	887-897
González, Francisco / Fernández, Jaime / Agranati, Galit / Villanueva, Paula	Influence of construction conditions on strength of post installed bonded anchors	272-283
Massana, Jordi / Reyes, Encarnación / Bernal, Jesús / León, Néstor / Sánchez-Espinosa, Elvira	Influence of nano- and micro-silica additions on the durability of a high-performance self-compacting concrete	93-103
Abate, Selamu Yihune / Song, Keum-Il / Song, Jin-Kyu / Lee, Bang Yeon / Kim, Hyeong-Ki	Internal curing effect of raw and carbonated recycled aggregate on the properties of high-strength slag-cement mortar	64-71
Liu, Ya / Zhang, Jing / Jiang, Yongjia / Li, Chenxuan / Xi, Zhonghua / Cai, Jun / Xie, Hongfeng	Investigation of secondary phase separation and mechanical properties of epoxy SBS-modified asphalts	163-172
Li, Yuanyuan / Wu, Shaopeng / Amirkhanian, Serji	Investigation of the graphene oxide and asphalt interaction and its effect on asphalt pavement performance	572-584
Basha Nusrath Unnisa, Chan / Nirmala Devi, Gowraraju / Hemapriya, Venkatesan / Chitra, Subramanian / Chung, Ill-Min / Kim, Seung-Hyun / Prabakaran, Mayakrishnan	Linear polyesters as effective corrosion inhibitors for steel rebars in chloride induced alkaline medium – An electrochemical approach	866-876
Yang, Lu / Gao, Yang / Shi, Gang / Wang, Xun / Bai, Yu	Low cycle fatigue property and fracture behavior of low yield point steels	688-696
Ai, Demi / Zhu, Hongping / Luo, Hui / Wang, Chao	Mechanical impedance based embedded piezoelectric transducer for reinforced concrete structural impact damage detection: A comparative study	472-483
Nepomuceno, Miguel C. S. / Isidoro, Rui A. S. / Catarino, José P. G.	Mechanical performance evaluation of concrete made with recycled ceramic coarse aggregates from industrial brick waste	284-294
Saeedi Javadi, Armin / Badiee, Hassan / Sabermahani, Mohsen	Mechanical properties and durability of bio-blocks with recycled concrete aggregates	859-865
Liang, Xiangwei / Wu, Chengqing	Meso-scale modelling of steel fibre reinforced concrete with high strength	187-198
Zhou, Rongxin / Lu, Yong	A mesoscale interface approach to modelling fractures in concrete for material investigation	608-620
Xu, Peijun / Zhu, Xingtian / Cong, Peiliang / Du, Xiaoming / Zhang, Ru	Modification of alkyl group terminated hyperbranched polyester on paving epoxy asphalt	295-302
Ameri, Mahmoud / Vamegh, Mostafa / Chavoshian Naeni, Seyed Farhad / Molayem, Mohammad	Moisture susceptibility evaluation of asphalt mixtures containing Evonik, Zycotherm and hydrated lime	958-965
Chen, Changhong / Zhang, Qian / Keer, Leon M. / Yao, Yao / Huang, Ying	The multi-factor effect of tensile strength of concrete in numerical simulation based on the Monte Carlo random aggregate distribution	585-595
Fernández-Fanjul, Avelino / Tenza-Abril, Antonio José / Baeza-Brotons, Francisco	A new methodology for determining water absorption of lightweight, normal-weight and heavyweight aggregates in a viscous medium	596-607
Wang, Lei / Zou, Fuliao / Fang, Xiaoliang / Tsang, Daniel C. W. / Poon, Chi Sun / Leng, Zhen / Baek, Kitae	A novel type of controlled low strength material derived from alum sludge and green materials	792-800
Kariou, F. A. / Triantafyllou, S. P. / Bournas, D. A. / Koutas, L. N.	Out-of-plane response of masonry walls strengthened using textile-mortar system	769-781
Hou, Dianhao / Han, Meizhao / Muhammad, Yaseen / Liu, Yu / Zhang, Fenglei / Yin, Yuhua / Duan, Shaochan / Li, Jing	Performance evaluation of modified asphalt based trackless tack coat materials	385-394
Dubois, V. / Leblanc, A. / Carpentier, O. / Alhaik, G. / Wirquin, E.	Performances of flax shive-based lightweight composites with rapid hardening	17-27
Wang, X. F. / Zhang, J. H. / Zhao, W. / Han, R. / Han, N. X. / Xing, F.	Permeability and pore structure of microcapsule-based self-healing cementitious composite	149-162
Davraz, Metin / Ceylan, Hakan / Topçu, İlker Bekir / Uygunoğlu, Tayfun	Pozzolanic effect of andesite waste powder on mechanical properties of high strength concrete	494-503
Wang, Rui / Ren, Miao / Gao, Xiaojian / Qin, Ling	Preparation and properties of fatty acids based thermal energy storage aggregate concrete	1-10
Alvarez, Allex E. / Mora, Juan C. / Espinosa, Leidy V.	Quantification of stone-on-stone contact in permeable friction course mixtures based on image analysis	462-471
Sharma, Krishneel K. / Deo, Ravin N. / Kumar, Ajal / Mamun, Kabir	Rebar corrosion due to chlorides in synergy with sodium, potassium, and magnesium	533-540
Penellum, Matthew / Sharma, Bhavna / Shah, Darshil U. / Foster, Robert M. / Ramage, Michael H.	Relationship of structure and stiffness in laminated bamboo composites	241-246
Gao, Xifeng / Zhang, Xupeng / Liu, Hongbo / Chen, Zhihua / Li, Hongqiang	Residual mechanical properties of stainless steels S30408 and S31608 after fire exposure	82-92
Gamerro, Julien / Robeller, Christopher / Weinand, Yves	Rotational mechanical behaviour of wood-wood connections with application to double-layered folded timber-plate structure	434-442
Nguyễn, Huy Hoàng / Choi, Jeong-Il / Song, Keum-Il / Song, Jin-Kyu / Huh, Jungwon / Lee, Bang Yeon	Self-healing properties of cement-based and alkali-activated slag-based fiber-reinforced composites	801-811
Sore, Seick Omar / Messan, Adamah / Prud'homme, Elodie / Escadeillas, Gilles / Tsobnang, François	Stabilization of compressed earth blocks (CEBs) by geopolymer binder based on local materials from Burkina Faso	333-345
Geraldo, Rodrigo H. / Teixeira, Otacisio G. / Matos, Samile R. C. / Silva, Francisco G. S. / Gonçalves, Jardel P. / Camarini, Gladis	Study of alkali-activated mortar used as conventional repair in reinforced concrete	914-919
Vassaux, S. / Gaudefroy, V. / Boulangé, L. / Soro, L. Jean / Pévère, A. / Michelet, A. / Barragan-Montero, V. / Mouillet, V.	Study of remobilization phenomena at reclaimed asphalt binder/virgin binder interphases for recycled asphalt mixtures using novel microscopic methodologies	846-858
Gao, Yingli / He, Bei / Xiao, Minqiang / Fang, Zaosheng / Dai, Kaiming	Study on properties and mechanisms of luminescent cement-based pavement materials with super-hydrophobic function	548-559
Xargay, Hernán / Folino, Paula / Sambataro, Luciano / Etse, Guillermo	Temperature effects on failure behavior of self-compacting high strength plain and fiber reinforced concrete	723-734
Shen, Dejian / Jiang, Jinliang / Zhang, Mingyue / Yao, Panpan / Jiang, Guoqing	Tensile creep and cracking potential of high performance concrete internally cured with super absorbent polymers at early age	451-461
Murmu, Anant L. / Patel, A.	Towards sustainable bricks production: An overview	112-125
Amiri, Ali / Bundur, Zeynep Başaran	Use of corn-steep liquor as an alternative carbon source for biomineralization in cement-based materials and its impact on performance	655-662
Hassine, Mohamed Ahmed / Beck, Kévin / Brunetaud, Xavier / Al-Mukhtar, Muzahim	Use of electrical resistance measurement to assess the water saturation profile in porous limestones during capillary imbibition	206-217
Kabeer, K. I. Syed Ahmed / Vyas, Ashok Kumar	Utilization of marble powder as fine aggregate in mortar mixes	321-332
Luo, Rong / Liu, Ziyao / Huang, Tingting / Tu, Chongzhi	Water vapor passing through asphalt mixtures under different relative humidity differentials	920-930

Informations
sur cette fiche
IssueID
35500
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.