Construction and Building Materials - March 2018

Published:	March 2018

Articles in this Issue

Author(s)	Title	Page(s)
Zhang, Jie / Wang, Zhiyong / Yang, Huawei / Wang, Zhihua / Shu, Xuefeng	3D meso-scale modeling of reinforcement concrete with high volume fraction of randomly distributed aggregates	350-361
Najimi, Meysam / Ghafoori, Nader / Sharbaf, MohammadReza	Alkali-activated natural pozzolan/slag mortars: A parametric study	625-643
Ralegaonkar, R. / Gavali, H. / Aswath, P. / Abolmaali, S.	Application of chopped basalt fibers in reinforced mortar: A review	589-602
Li, Wenzhe / Cai, Liangcai / Wu, Yonggen / Liu, Qingtao / Yu, Hongjiang / Zhang, Chujie	Assessing recycled pavement concrete mechanical properties under joint action of freezing and fatigue via RSM	1-11
Ercan, Emre	Assessing the impact of retrofitting on structural safety in historical buildings via ambient vibration tests	337-349
Terjék, Anita / Dudás, Annamária	Ceramic Floor Slipperiness Classification – A new approach for assessing slip resistance of ceramic tiles	809-819
Masri, Tahar / Ounis, Houdayfa / Sedira, Lakhdar / Kaci, Abdelhak / Benchabane, Adel	Characterization of new composite material based on date palm leaflets and expanded polystyrene wastes	410-418
Ustabas, Ilker / Kaya, Ayberk	Comparing the pozzolanic activity properties of obsidian to those of fly ash and blast furnace slag	297-307
Eskelinen, Pekka / Pellinen, Terhi	Comparison of different radar technologies and frequencies for road pavement evaluation	888-898
Turk, Kazim / Nehdi, Moncef L.	Coupled effects of limestone powder and high-volume fly ash on mechanical properties of ECC	185-192
Sun, Wei	Development of a testing methodology for the design and quality control of carbon fiber reinforced polymer (CFRP) anchors	150-163
Carriço, A. / Bogas, J. A. / Hawreen, A. / Guedes, M.	Durability of multi-walled carbon nanotube reinforced concrete	121-133
Joshaghani, Alireza / Balapour, Mohammad / Ramezanianpour, Ali Akbar	Effect of controlled environmental conditions on mechanical, microstructural and durability properties of cement mortar	134-149
Du, Shaowen	Effect of curing conditions on properties of cement asphalt emulsion mixture	84-93
Dinh, Ba Huu / Park, Dae-Wook / Le, Tri Ho Minh	Effect of rejuvenators on the crack healing performance of recycled asphalt pavement by induction heating	246-254
Adu-Amankwah, Samuel / Black, Leon / Skocek, Jan / Ben Haha, Mohsen / Zajac, Maciej	Effect of sulfate additions on hydration and performance of ternary slag-limestone composite cements	451-462
Khoshroo, Moein / Shirzadi Javid, Ali Akbar / Katebi, Ali	Effects of micro-nano bubble water and binary mineral admixtures on the mechanical and durability properties of concrete	371-385
Ren, G. M. / Wu, H. / Fang, Q. / Liu, J. Z.	Effects of steel fiber content and type on dynamic compressive mechanical properties of UHPCC	29-43
Gharavi, N. / Zhang, H. / Xie, Y. / He, T.	End effect on determining shear modulus of timber beams in torsion tests	442-450
Bai, Shuya / Jiang, Linhua / Xu, Ning / Jin, Ming / Jiang, ShaoBo	Enhancement of mechanical and electrical properties of graphene/cement composite due to improved dispersion of graphene by addition of silica fume	433-441
Xu, Shujuan / Xie, Ning / Cheng, Xin / Huang, Shifeng / Feng, Lichao / Hou, Pengkun / Zhu, Yunzhe	Environmental resistance of cement concrete modified with low dosage nano particles	535-553
Liu, Simeng / Ma, Huixiang	Estimation of the stress level on a cross section of a reinforced concrete beam via Acoustic emission Intensity Distribution (AID) analysis	463-476
Rasouli, Amir / Kavussi, Amir / Qazizadeh, Morteza Jalili / Taghikhani, Amir Hossein	Evaluating the effect of laboratory aging on fatigue behavior of asphalt mixtures containing hydrated lime	655-662
Latifi, Hassan / Hayati, Parham	Evaluating the effects of the wet and simple processes for including carbon Nanotube modifier in hot mix asphalt	326-336
Glinicki, M. A. / Antolik, A. / Gawlicki, M.	Evaluation of compatibility of neutron-shielding boron aggregates with Portland cement in mortar	731-738
Vandenberg, Aileen / Wille, Kay	Evaluation of resonance acoustic mixing technology using ultra high performance concrete	716-730
Foroutan, Maziar / Hassan, Marwa M. / Desrosiers, Natalie / Rupnow, Tyson	Evaluation of the reuse and recycling of drill cuttings in concrete applications	400-409
Qiu, Zhenyu / Chen, Wujun / Gao, Chengjun / Hu, Yu	Experimental and numerical study on nonlinear mechanical properties of laminated woven fabrics	672-681
Shabdin, M. / Zargaran, M. / Attari, Nader K. A.	Experimental diagonal tension (shear) test of Un-Reinforced Masonry (URM) walls strengthened with textile reinforced mortar (TRM)	704-715
Zhu, Han / Rong, Bin / Xie, Rong / Yang, Ziheng	Experimental investigation on the floating of rubber particles of crumb rubber concrete	644-654
Reboul, Nadège / Mesticou, Zyed / Si Larbi, Amir / Ferrier, Emmanuel	Experimental study of the in-plane cyclic behaviour of masonry walls strengthened by composite materials	70-83
Justo-Reinoso, Ismael / Srubar, Wil V. / Caicedo-Ramirez, Alejandro / Hernandez, Mark T.	Fine aggregate substitution by granular activated carbon can improve physical and mechanical properties of cement mortars	750-759
Tavira, Javier / Jiménez, José Ramón / Ayuso, Jesús / Sierra, María José / Ledesma, Enrique Fernández	Functional and structural parameters of a paved road section constructed with mixed recycled aggregates from non-selected construction and demolition waste with excavation soil	57-69
Gao, Jianhua / Yan, Kezhen / He, Weili / Yang, Shengfeng / You, Lingyun	High temperature performance of asphalt modified with Sasobit and Deurex	783-791
Zhang, Xiaoyue / Popovski, Marjan / Tannert, Thomas	High-capacity hold-down for mass-timber buildings	688-703
Wakjira, Tadesse G. / Ebead, Usama	Hybrid NSE/EB technique for shear strengthening of reinforced concrete beams using FRCM: Experimental study	164-177
Krishnan, Sreejith / Kanaujia, Swadesh Kumar / Mithia, Santanu / Bishnoi, Shashank	Hydration kinetics and mechanisms of carbonates from stone wastes in ternary blends with calcined clay	265-274
Uçal, Gültekin Ozan / Mahyar, Mahdi / Tokyay, Mustafa	Hydration of alinite cement produced from soda waste sludge	178-184
Anay, Rafal / Soltangharaei, Vafa / Assi, Lateef / DeVol, Timothy / Ziehl, Paul	Identification of damage mechanisms in cement paste based on acoustic emission	286-296
Tayfur, Sena / Alver, Ninel / Tanarslan, H. Murat / Ercan, Emre	Identifying CFRP strip width influence on fracture of RC beams by acoustic emission	864-876
Todorovic, J. / Janssen, H.	The impact of salt pore clogging on the hygric properties of bricks	850-863
Chen, Wen / Hao, Jianzhong / Tang, Ming	Improved estimate and accurate measurement of thermal stresses in FRP tendon	620-624
Morea, F. / Zerbino, R.	Improvement of asphalt mixture performance with glass macro-fibers	113-120
Zhu, Chongzheng / Xu, Guoqing / Zhang, Henglong / Xiao, Feipeng / Amirkhanian, Serji / Wu, Chaofan	Influence of different anti-stripping agents on the rheological properties of asphalt binder at high temperature	317-325
Wang, Xiao-Hui / Val, Dimitri V. / Zheng, Li / Jones, M. Roderick	Influence of loading and cracks on carbonation of RC elements made of different concrete types	12-28
Markandeya, Ananya / Shanahan, Natallia / Gunatilake, Dhanushika Mapa / Riding, Kyle A. / Zayed, A.	Influence of slag composition on cracking potential of slag-portland cement concrete	820-829
Yu, Xiaoniu / Qian, Chunxiang / Sun, Linzhu	The influence of the number of injections of bio-composite cement on the properties of bio-sandstone cemented by bio-composite cement	682-687
Xu, Shilang / Malik, Muhammad Akbar / Qi, Zhang / Huang, BoTao / Li, Qinghua / Sarkar, Manas	Influence of the PVA fibers and SiO2 NPs on the structural properties of fly ash based sustainable geopolymer	238-245
Luo, Jing / Chen, Xiaobo / Crump, Jada / Zhou, Hui / Davies, David G. / Zhou, Guangwen / Zhang, Ning / Jin, Congrui	Interactions of fungi with concrete: Significant importance for bio-based self-healing concrete	275-285
Du, Jiapei / Bu, Yuhuan / Shen, Zhonghou	Interfacial properties and nanostructural characteristics of epoxy resin in cement matrix	103-112
Wang, Han-Lin / Cui, Yu-Jun / Lamas-Lopez, Francisco / Calon, Nicolas / Saussine, Gilles / Dupla, Jean-Claude / Canou, Jean / Aimedieu, Patrick / Chen, Ren-Peng	Investigation on the mechanical behavior of track-bed materials at various contents of coarse grains	228-237
Jeoffroy, Etienne / Bouville, Florian / Bueno, Moises / Studart, André R. / Partl, Manfred N.	Iron-based particles for the magnetically-triggered crack healing of bituminous materials	775-782
Safiuddin, Md. / Yakhlaf, M. / Soudki, K. A.	Key mechanical properties and microstructure of carbon fibre reinforced self-consolidating concrete	477-488
Zhang, Bo / Zhang, Yunyun / Liao, Wenyu / Ma, Hongyan	Locally resonant meta-composite for sound-proof of building envelops: Analytical model and experiment	792-798
Song, Shiqi / Jiang, Linhua / Jiang, ShaoBo / Yan, Xiancui / Xu, Ning	The mechanical properties and electrochemical behavior of cement paste containing nano-MgO at different curing temperature	663-671
Huang, Zhenyu / Padmaja, Krishnan / Li, Shan / Liew, J. Y. Richard	Mechanical properties and microstructure of ultra-lightweight cement composites with fly ash cenospheres after exposure to high temperatures	760-774
Kong, Lijuan / Liu, Chun / Cao, Mengfan / Fang, Jun	Mechanism study of the role of biofilm played in sewage corrosion of mortar	44-56
Li, Ben / Baingam, Lalita / Kurumisawa, Kiyofumi / Nawa, Toyoharu / XiaoZhou, Liu	Micro-mechanical modelling for the prediction of alkali-silica reaction (ASR) expansion: Influence of curing temperature conditions	554-569
Hong, Geuntae / Choi, Seongcheol	Modeling rapid self-sealing of cracks in cementitious materials using superabsorbent polymers	570-578
Zhang, Linglei / Ji, Yongsheng / Huang, Guodong / Li, Jun / Hu, Yijie	Modification and enhancement of mechanical properties of dehydrated cement paste using ground granulated blast-furnace slag	525-534
Evangelides, Chris / Arampatzis, George / Tsambali, Ariadne-Anne / Tzanetaki, Eleni / Tzimopoulos, Christos	Moisture estimation in building materials with a simple procedure	830-836
Hong, Wan / Jiang, Yuchen / Li, Bing / Qin, Zheng / Hu, Xiamin	Nonlinear parameter identification of timber-concrete composite beams using long-gauge fiber optic sensors	217-227
Al-Majidi, Mohammed Haloob / Lampropoulos, Andreas P. / Cundy, Andrew B. / Tsioulou, Ourania T. / Al-Rekabi, Salam	A novel corrosion resistant repair technique for existing reinforced concrete (RC) elements using polyvinyl alcohol fibre reinforced geopolymer concrete (PVAFRGC)	603-619
Mohammed, Siline / Safiullah, Omary	Optimization of the SO3 content of an Algerian Portland cement: Study on the effect of various amounts of gypsum on cement properties	362-370
Nematzadeh, Mahdi / Dashti, Javad / Ganjavi, Behnoud	Optimizing compressive behavior of concrete containing fine recycled refractory brick aggregate together with calcium aluminate cement and polyvinyl alcohol fibers exposed to acidic environment	837-849
Athukorallage, Bhagya / Dissanayaka, Tharanga / Senadheera, Sanjaya / James, Darryl	Performance analysis of incorporating phase change materials in asphalt concrete pavements	419-432
Liu, Kaihua / Yan, Jiachuan / Zou, Chaoying	A pilot experimental study on seismic behavior of recycled aggregate concrete columns after freeze-thaw cycles	497-507
Zhou, Binbin / Gu, Xianglin / Guo, Hongyuan / Zhang, Weiping / Huang, Qinghua	Polarization behavior of activated reinforcing steel bars in concrete under chloride environments	877-887
Russo, Francesca / Biancardo, Salvatore Antonio / Formisano, Anna / Dell'Acqua, Gianluca	Predicting percent air voids content in compacted bituminous hot mixture specimens by varying the energy laboratory compaction and the bulk density assessment method	508-524
Tanikura, Izumi / Shintani, Ren / Sainoki, Atsushi / Watanabe, Shinya / Obara, Yuzo	Quantitative comparison of chipping- and hydrodemolition-induced microscopic damage evolution in concrete substrates	193-205
Soive, Anthony / Tran, Van Quan / Baroghel-Bouny, Véronique	Requirements and possible simplifications for multi-ionic transport models – Case of concrete subjected to wetting-drying cycles in marine environment	799-808
Gour, Khalid Ahmed / Ramadoss, Ravi / Selvaraj, Thirumalini	Revamping the traditional air lime mortar using the natural polymer – Areca nut for restoration application	255-264
Hao, Xiaolong / Zhou, Haiyang / Xie, Yanjun / Mu, Hailong / Wang, Qingwen	Sandwich-structured wood flour/HDPE composite panels: Reinforcement using a linear low-density polyethylene core layer	489-496
Wang, Bing / Li, Qinghua / Liu, Fei / Wang, Jianping / Xu, Shilang	Shear bond assessment of UHTCC repair using push-out test	206-216
Sharkawi, Aladdin M. / Abd-Elaty, Metwally A. / Khalifa, Omar H.	Synergistic influence of micro-nano silica mixture on durability performance of cementious materials	579-588
Ali, M. R. / Maslehuddin, M. / Shameem, M. / Barry, M. S.	Thermal-resistant lightweight concrete with polyethylene beads as coarse aggregates	739-749
Madej, Dominika / Kruk, Andrzej	Tracing the early and long-term hydration of fast setting cementitious material (Ca7ZrAl6O18) and calcium aluminate cement (CAC) pastes by means of electrochemical impedance spectroscopy and other methods	94-102
Wang, Y. / Li, C. H. / Hu, Y. Z.	Use of X-ray computed tomography to investigate the effect of rock blocks on meso-structural changes in soil-rock mixture under triaxial deformation	386-399
Kain, Günther / Lienbacher, Bernhard / Barbu, Marius-Catalin / Senck, Sascha / Petutschnigg, Alexander	Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling	308-316

About this
data sheet
IssueID
35499
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.