Construction and Building Materials - März 2018

Erschienen:	März 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhang, Jie / Wang, Zhiyong / Yang, Huawei / Wang, Zhihua / Shu, Xuefeng	3D meso-scale modeling of reinforcement concrete with high volume fraction of randomly distributed aggregates	350-361
Najimi, Meysam / Ghafoori, Nader / Sharbaf, MohammadReza	Alkali-activated natural pozzolan/slag mortars: A parametric study	625-643
Ralegaonkar, R. / Gavali, H. / Aswath, P. / Abolmaali, S.	Application of chopped basalt fibers in reinforced mortar: A review	589-602
Li, Wenzhe / Cai, Liangcai / Wu, Yonggen / Liu, Qingtao / Yu, Hongjiang / Zhang, Chujie	Assessing recycled pavement concrete mechanical properties under joint action of freezing and fatigue via RSM	1-11
Ercan, Emre	Assessing the impact of retrofitting on structural safety in historical buildings via ambient vibration tests	337-349
Terjék, Anita / Dudás, Annamária	Ceramic Floor Slipperiness Classification – A new approach for assessing slip resistance of ceramic tiles	809-819
Masri, Tahar / Ounis, Houdayfa / Sedira, Lakhdar / Kaci, Abdelhak / Benchabane, Adel	Characterization of new composite material based on date palm leaflets and expanded polystyrene wastes	410-418
Ustabas, Ilker / Kaya, Ayberk	Comparing the pozzolanic activity properties of obsidian to those of fly ash and blast furnace slag	297-307
Eskelinen, Pekka / Pellinen, Terhi	Comparison of different radar technologies and frequencies for road pavement evaluation	888-898
Turk, Kazim / Nehdi, Moncef L.	Coupled effects of limestone powder and high-volume fly ash on mechanical properties of ECC	185-192
Sun, Wei	Development of a testing methodology for the design and quality control of carbon fiber reinforced polymer (CFRP) anchors	150-163
Carriço, A. / Bogas, J. A. / Hawreen, A. / Guedes, M.	Durability of multi-walled carbon nanotube reinforced concrete	121-133
Joshaghani, Alireza / Balapour, Mohammad / Ramezanianpour, Ali Akbar	Effect of controlled environmental conditions on mechanical, microstructural and durability properties of cement mortar	134-149
Du, Shaowen	Effect of curing conditions on properties of cement asphalt emulsion mixture	84-93
Dinh, Ba Huu / Park, Dae-Wook / Le, Tri Ho Minh	Effect of rejuvenators on the crack healing performance of recycled asphalt pavement by induction heating	246-254
Adu-Amankwah, Samuel / Black, Leon / Skocek, Jan / Ben Haha, Mohsen / Zajac, Maciej	Effect of sulfate additions on hydration and performance of ternary slag-limestone composite cements	451-462
Khoshroo, Moein / Shirzadi Javid, Ali Akbar / Katebi, Ali	Effects of micro-nano bubble water and binary mineral admixtures on the mechanical and durability properties of concrete	371-385
Ren, G. M. / Wu, H. / Fang, Q. / Liu, J. Z.	Effects of steel fiber content and type on dynamic compressive mechanical properties of UHPCC	29-43
Gharavi, N. / Zhang, H. / Xie, Y. / He, T.	End effect on determining shear modulus of timber beams in torsion tests	442-450
Bai, Shuya / Jiang, Linhua / Xu, Ning / Jin, Ming / Jiang, ShaoBo	Enhancement of mechanical and electrical properties of graphene/cement composite due to improved dispersion of graphene by addition of silica fume	433-441
Xu, Shujuan / Xie, Ning / Cheng, Xin / Huang, Shifeng / Feng, Lichao / Hou, Pengkun / Zhu, Yunzhe	Environmental resistance of cement concrete modified with low dosage nano particles	535-553
Liu, Simeng / Ma, Huixiang	Estimation of the stress level on a cross section of a reinforced concrete beam via Acoustic emission Intensity Distribution (AID) analysis	463-476
Rasouli, Amir / Kavussi, Amir / Qazizadeh, Morteza Jalili / Taghikhani, Amir Hossein	Evaluating the effect of laboratory aging on fatigue behavior of asphalt mixtures containing hydrated lime	655-662
Latifi, Hassan / Hayati, Parham	Evaluating the effects of the wet and simple processes for including carbon Nanotube modifier in hot mix asphalt	326-336
Glinicki, M. A. / Antolik, A. / Gawlicki, M.	Evaluation of compatibility of neutron-shielding boron aggregates with Portland cement in mortar	731-738
Vandenberg, Aileen / Wille, Kay	Evaluation of resonance acoustic mixing technology using ultra high performance concrete	716-730
Foroutan, Maziar / Hassan, Marwa M. / Desrosiers, Natalie / Rupnow, Tyson	Evaluation of the reuse and recycling of drill cuttings in concrete applications	400-409
Qiu, Zhenyu / Chen, Wujun / Gao, Chengjun / Hu, Yu	Experimental and numerical study on nonlinear mechanical properties of laminated woven fabrics	672-681
Shabdin, M. / Zargaran, M. / Attari, Nader K. A.	Experimental diagonal tension (shear) test of Un-Reinforced Masonry (URM) walls strengthened with textile reinforced mortar (TRM)	704-715
Zhu, Han / Rong, Bin / Xie, Rong / Yang, Ziheng	Experimental investigation on the floating of rubber particles of crumb rubber concrete	644-654
Reboul, Nadège / Mesticou, Zyed / Si Larbi, Amir / Ferrier, Emmanuel	Experimental study of the in-plane cyclic behaviour of masonry walls strengthened by composite materials	70-83
Justo-Reinoso, Ismael / Srubar, Wil V. / Caicedo-Ramirez, Alejandro / Hernandez, Mark T.	Fine aggregate substitution by granular activated carbon can improve physical and mechanical properties of cement mortars	750-759
Tavira, Javier / Jiménez, José Ramón / Ayuso, Jesús / Sierra, María José / Ledesma, Enrique Fernández	Functional and structural parameters of a paved road section constructed with mixed recycled aggregates from non-selected construction and demolition waste with excavation soil	57-69
Gao, Jianhua / Yan, Kezhen / He, Weili / Yang, Shengfeng / You, Lingyun	High temperature performance of asphalt modified with Sasobit and Deurex	783-791
Zhang, Xiaoyue / Popovski, Marjan / Tannert, Thomas	High-capacity hold-down for mass-timber buildings	688-703
Wakjira, Tadesse G. / Ebead, Usama	Hybrid NSE/EB technique for shear strengthening of reinforced concrete beams using FRCM: Experimental study	164-177
Krishnan, Sreejith / Kanaujia, Swadesh Kumar / Mithia, Santanu / Bishnoi, Shashank	Hydration kinetics and mechanisms of carbonates from stone wastes in ternary blends with calcined clay	265-274
Uçal, Gültekin Ozan / Mahyar, Mahdi / Tokyay, Mustafa	Hydration of alinite cement produced from soda waste sludge	178-184
Anay, Rafal / Soltangharaei, Vafa / Assi, Lateef / DeVol, Timothy / Ziehl, Paul	Identification of damage mechanisms in cement paste based on acoustic emission	286-296
Tayfur, Sena / Alver, Ninel / Tanarslan, H. Murat / Ercan, Emre	Identifying CFRP strip width influence on fracture of RC beams by acoustic emission	864-876
Todorovic, J. / Janssen, H.	The impact of salt pore clogging on the hygric properties of bricks	850-863
Chen, Wen / Hao, Jianzhong / Tang, Ming	Improved estimate and accurate measurement of thermal stresses in FRP tendon	620-624
Morea, F. / Zerbino, R.	Improvement of asphalt mixture performance with glass macro-fibers	113-120
Zhu, Chongzheng / Xu, Guoqing / Zhang, Henglong / Xiao, Feipeng / Amirkhanian, Serji / Wu, Chaofan	Influence of different anti-stripping agents on the rheological properties of asphalt binder at high temperature	317-325
Wang, Xiao-Hui / Val, Dimitri V. / Zheng, Li / Jones, M. Roderick	Influence of loading and cracks on carbonation of RC elements made of different concrete types	12-28
Markandeya, Ananya / Shanahan, Natallia / Gunatilake, Dhanushika Mapa / Riding, Kyle A. / Zayed, A.	Influence of slag composition on cracking potential of slag-portland cement concrete	820-829
Yu, Xiaoniu / Qian, Chunxiang / Sun, Linzhu	The influence of the number of injections of bio-composite cement on the properties of bio-sandstone cemented by bio-composite cement	682-687
Xu, Shilang / Malik, Muhammad Akbar / Qi, Zhang / Huang, BoTao / Li, Qinghua / Sarkar, Manas	Influence of the PVA fibers and SiO2 NPs on the structural properties of fly ash based sustainable geopolymer	238-245
Luo, Jing / Chen, Xiaobo / Crump, Jada / Zhou, Hui / Davies, David G. / Zhou, Guangwen / Zhang, Ning / Jin, Congrui	Interactions of fungi with concrete: Significant importance for bio-based self-healing concrete	275-285
Du, Jiapei / Bu, Yuhuan / Shen, Zhonghou	Interfacial properties and nanostructural characteristics of epoxy resin in cement matrix	103-112
Wang, Han-Lin / Cui, Yu-Jun / Lamas-Lopez, Francisco / Calon, Nicolas / Saussine, Gilles / Dupla, Jean-Claude / Canou, Jean / Aimedieu, Patrick / Chen, Ren-Peng	Investigation on the mechanical behavior of track-bed materials at various contents of coarse grains	228-237
Jeoffroy, Etienne / Bouville, Florian / Bueno, Moises / Studart, André R. / Partl, Manfred N.	Iron-based particles for the magnetically-triggered crack healing of bituminous materials	775-782
Safiuddin, Md. / Yakhlaf, M. / Soudki, K. A.	Key mechanical properties and microstructure of carbon fibre reinforced self-consolidating concrete	477-488
Zhang, Bo / Zhang, Yunyun / Liao, Wenyu / Ma, Hongyan	Locally resonant meta-composite for sound-proof of building envelops: Analytical model and experiment	792-798
Song, Shiqi / Jiang, Linhua / Jiang, ShaoBo / Yan, Xiancui / Xu, Ning	The mechanical properties and electrochemical behavior of cement paste containing nano-MgO at different curing temperature	663-671
Huang, Zhenyu / Padmaja, Krishnan / Li, Shan / Liew, J. Y. Richard	Mechanical properties and microstructure of ultra-lightweight cement composites with fly ash cenospheres after exposure to high temperatures	760-774
Kong, Lijuan / Liu, Chun / Cao, Mengfan / Fang, Jun	Mechanism study of the role of biofilm played in sewage corrosion of mortar	44-56
Li, Ben / Baingam, Lalita / Kurumisawa, Kiyofumi / Nawa, Toyoharu / XiaoZhou, Liu	Micro-mechanical modelling for the prediction of alkali-silica reaction (ASR) expansion: Influence of curing temperature conditions	554-569
Hong, Geuntae / Choi, Seongcheol	Modeling rapid self-sealing of cracks in cementitious materials using superabsorbent polymers	570-578
Zhang, Linglei / Ji, Yongsheng / Huang, Guodong / Li, Jun / Hu, Yijie	Modification and enhancement of mechanical properties of dehydrated cement paste using ground granulated blast-furnace slag	525-534
Evangelides, Chris / Arampatzis, George / Tsambali, Ariadne-Anne / Tzanetaki, Eleni / Tzimopoulos, Christos	Moisture estimation in building materials with a simple procedure	830-836
Hong, Wan / Jiang, Yuchen / Li, Bing / Qin, Zheng / Hu, Xiamin	Nonlinear parameter identification of timber-concrete composite beams using long-gauge fiber optic sensors	217-227
Al-Majidi, Mohammed Haloob / Lampropoulos, Andreas P. / Cundy, Andrew B. / Tsioulou, Ourania T. / Al-Rekabi, Salam	A novel corrosion resistant repair technique for existing reinforced concrete (RC) elements using polyvinyl alcohol fibre reinforced geopolymer concrete (PVAFRGC)	603-619
Mohammed, Siline / Safiullah, Omary	Optimization of the SO3 content of an Algerian Portland cement: Study on the effect of various amounts of gypsum on cement properties	362-370
Nematzadeh, Mahdi / Dashti, Javad / Ganjavi, Behnoud	Optimizing compressive behavior of concrete containing fine recycled refractory brick aggregate together with calcium aluminate cement and polyvinyl alcohol fibers exposed to acidic environment	837-849
Athukorallage, Bhagya / Dissanayaka, Tharanga / Senadheera, Sanjaya / James, Darryl	Performance analysis of incorporating phase change materials in asphalt concrete pavements	419-432
Liu, Kaihua / Yan, Jiachuan / Zou, Chaoying	A pilot experimental study on seismic behavior of recycled aggregate concrete columns after freeze-thaw cycles	497-507
Zhou, Binbin / Gu, Xianglin / Guo, Hongyuan / Zhang, Weiping / Huang, Qinghua	Polarization behavior of activated reinforcing steel bars in concrete under chloride environments	877-887
Russo, Francesca / Biancardo, Salvatore Antonio / Formisano, Anna / Dell'Acqua, Gianluca	Predicting percent air voids content in compacted bituminous hot mixture specimens by varying the energy laboratory compaction and the bulk density assessment method	508-524
Tanikura, Izumi / Shintani, Ren / Sainoki, Atsushi / Watanabe, Shinya / Obara, Yuzo	Quantitative comparison of chipping- and hydrodemolition-induced microscopic damage evolution in concrete substrates	193-205
Soive, Anthony / Tran, Van Quan / Baroghel-Bouny, Véronique	Requirements and possible simplifications for multi-ionic transport models – Case of concrete subjected to wetting-drying cycles in marine environment	799-808
Gour, Khalid Ahmed / Ramadoss, Ravi / Selvaraj, Thirumalini	Revamping the traditional air lime mortar using the natural polymer – Areca nut for restoration application	255-264
Hao, Xiaolong / Zhou, Haiyang / Xie, Yanjun / Mu, Hailong / Wang, Qingwen	Sandwich-structured wood flour/HDPE composite panels: Reinforcement using a linear low-density polyethylene core layer	489-496
Wang, Bing / Li, Qinghua / Liu, Fei / Wang, Jianping / Xu, Shilang	Shear bond assessment of UHTCC repair using push-out test	206-216
Sharkawi, Aladdin M. / Abd-Elaty, Metwally A. / Khalifa, Omar H.	Synergistic influence of micro-nano silica mixture on durability performance of cementious materials	579-588
Ali, M. R. / Maslehuddin, M. / Shameem, M. / Barry, M. S.	Thermal-resistant lightweight concrete with polyethylene beads as coarse aggregates	739-749
Madej, Dominika / Kruk, Andrzej	Tracing the early and long-term hydration of fast setting cementitious material (Ca7ZrAl6O18) and calcium aluminate cement (CAC) pastes by means of electrochemical impedance spectroscopy and other methods	94-102
Wang, Y. / Li, C. H. / Hu, Y. Z.	Use of X-ray computed tomography to investigate the effect of rock blocks on meso-structural changes in soil-rock mixture under triaxial deformation	386-399
Kain, Günther / Lienbacher, Bernhard / Barbu, Marius-Catalin / Senck, Sascha / Petutschnigg, Alexander	Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling	308-316

Über diese
Datenseite
IssueID
35499
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - März 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - März 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.