Construction and Building Materials - April 2018

Published:	April 2018

Articles in this Issue

Author(s)	Title	Page(s)
Dong, Biqin / Ding, Weijian / Qin, Shaofeng / Fang, Guohao / Liu, Yuqing / Dong, Peng / Han, Shiwen / Xing, Feng / Hong, Shuxian	3D visualized tracing of rebar corrosion-inhibiting features in concrete with a novel chemical self-healing system	11-20
Muñoz, I. / Cifrian, E. / Andrés, A. / Miguel, G. San / Ruiz, D. / Viguri, J. R.	Analysis of environmental benefits associated with the incorporation of Waelz slag into fired bricks using LCA	178-186
Isailović, Ivan / Wistuba, Michael P.	Asphalt mixture layers’ interface bonding properties under monotonic and cyclic loading	590-597
Ibrahim, Mohamed Atef / Sharkawi, Alaa El-Din M. / El-Attar, Mohamed M. / Hodhod, Osama A.	Assessing the corrosion performance for concrete mixtures made of blended cements	21-30
Wood, Stephanie G. / Giannini, Eric R. / Ramsey, Monica A. / Moser, Robert D.	Autoclave test parameters for determining alkali-silica reactivity of concrete aggregates	683-691
Liu, Jie-Peng / Xu, Tian-Xiang / Wang, Yu-Hang / Guo, Ying	Axial behaviour of circular steel tubed concrete stub columns confined by CFRP materials	221-231
Ong, Chee Beng / Chang, Wen-Shao / Ansell, Martin P. / Brandon, Daniel / Sterley, Magdalena / Walker, Pete	Bench-scale fire tests of Dark Red Meranti and Spruce finger joints in tension	257-265
Cui, Wei / Yan, Wei-shuo / Song, Hui-fang / Wu, Xin-li	Blocking analysis of fresh self-compacting concrete based on the DEM	412-421
Deng, Mingke / Pan, Jiaojiao / Sun, Hongzhe	Bond behavior of steel bar embedded in Engineered Cementitious Composites under pullout load	705-714
Song, Zhengyang / Frühwirt, Thomas / Konietzky, Heinz	Characteristics of dissipated energy of concrete subjected to cyclic loading	47-60
Yuan, Jie / Wu, Yue / Zhang, Jiake	Characterization of air voids and frost resistance of concrete based on industrial computerized tomographical technology	975-983
Khoshnazar, Rahil / Shao, Yixin	Characterization of carbonation-cured cement paste using X-ray photoelectron spectroscopy	598-605
Kadhim, Ihsan Taha / Güneyisi, Esra Mete	Code based assessment of load capacity of steel tubular columns infilled with recycled aggregate concrete under compression	715-731
Li, L. G. / Zheng, J. Y. / Zhu, J. / Kwan, A. K. H.	Combined usage of micro-silica and nano-silica in concrete: SP demand, cementing efficiencies and synergistic effect	622-632
Jamshidi, Ali / Mohd Hasan, Mohd Rosli / Lee, Mei Ting	Comparative study on engineering properties and energy efficiency of asphalt mixes incorporating fly ash and cement	295-304
Lv, Quan / Huang, Weidong / Tang, Naipeng / Xiao, Feipeng	Comparison and relationship between indices for the characterization of the moisture resistance of asphalt–aggregate systems	580-589
Li, Beixing / Lv, Xingdong / Dong, Yun / Zhou, Shihua / Zhang, Jianfeng	Comparison of the retarding mechanisms of sodium gluconate and amino trimethylene phosphonic acid on cement hydration and the influence on cement performance	958-965
Richardson, I. G. / Li, S.	Composition and structure of an 18-year-old 5M KOH-activated ground granulated blast-furnace slag paste	404-411
Delongui, Lucas / Matuella, Matheus / Núñez, Washington Peres / Fedrigo, William / da Silva Filho, Luiz Carlos Pinto / Ceratti, Jorge Augusto Pereira	Construction and demolition waste parameters for rational pavement design	105-112
Zhang, Yong / Xu, Xiang / Liu, Shuran / Chen, Tengteng / Hu, Zhongwei	Crashworthiness design for bi-graded composite circular structures	633-649
Lee, Hyuk / Vimonsatit, Vanissorn / Chindaprasirt, Prinya / Ngo, Tuan / Mendis, Priyan	Creep properties of cement and alkali activated fly ash materials using nanoindentation technique	547-555
Zeng, Xiaohui / Li, Yirui / Ran, Yuzhou / Yang, Kai / Qu, Fulin / Wang, Ping	Deterioration mechanism of CA mortar due to simulated acid rain	1008-1015
Habibi, Alireza / Ghomashi, Jian	Development of an optimum mix design method for self-compacting concrete based on experimental results	113-123
Luo, Rong / Lv, Huijie / Liu, Hanqi	Development of Prony series models based on continuous relaxation spectrums for relaxation moduli determined using creep tests	758-770
Kim, Sun Gil / Park, Jun Kil / Kim, Dong joo	Direct tensile responses of aramid fiber reinforced cementitious composites and textile reinforced cementitious composites with 3D spacer fabric at high strain rates	232-243
Bravo, M. / de Brito, J. / Evangelista, L. / Pacheco, J.	Durability and shrinkage of concrete with CDW as recycled aggregates: Benefits from superplasticizer’s incorporation and influence of CDW composition	818-830
McIsaac, Anne / Fam, Amir	Durability under freeze–thaw cycles of concrete beams retrofitted with externally bonded FRPs using bio-based resins	244-256
Berrio, Ariel / Rodriguez, Claudia / Tobón, Jorge I.	Effect of Al2O3/SiO2 ratio on ye’elimite production on CSA cement	512-521
McIsaac, Anne / Fam, Amir	The effect of bio-based content in resin blends on tensile properties of FRP wet layup systems	328-337
Vejmelková, Eva / Koňáková, Dana / Doleželová, Magdalena / Scheinherrová, Lenka / Svora, Petr / Keppert, Martin / Reiterman, Pavel / Černý, Robert	Effect of calcined Czech claystone on the properties of high performance concrete: Microstructure, strength and durability	966-974
Lin, Cong / Tongjing, Wang	Effect of fine aggregate angularity on skid-resistance of asphalt pavement using accelerated pavement testing	41-46
Doleželová, Magdalena / Scheinherrová, Lenka / Krejsová, Jitka / Vimmrová, Alena	Effect of high temperatures on gypsum-based composites	82-90
López-Montero, Teresa / Crucho, João / Picado-Santos, Luís / Miró, Rodrigo	Effect of nanomaterials on ageing and moisture damage using the indirect tensile strength test	31-40
Zachariah, Jince P. / Sarkar, Partha Pratim / Debnath, Barnali / Pal, Manish	Effect of polypropylene fibres on bituminous concrete with brick as aggregate	867-876
Gao, Yang / Song, Zhigang / Xu, Qing	Effect of SnSO4 on physical and chemical properties of cement	490-500
Liu, Guoqiang / Yang, Tao / Li, Jing / Jia, Yanshun / Zhao, Yongli / Zhang, Jiupeng	Effects of aging on rheological properties of asphalt materials and asphalt-filler interaction ability	501-511
Ding, Xinxin / Li, Changyong / Han, Bing / Lu, Yazhao / Zhao, Shunbo	Effects of different deformed steel-fibers on preparation and fundamental properties of self-compacting SFRC	471-481
Akca, Abdullah Huzeyfe / Ozyurt, Nilufer	Effects of re-curing on microstructure of concrete after high temperature exposure	431-441
Abbass, Wasim / Khan, M. Iqbal / Mourad, Shehab	Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete	556-569
De Coster, Albéric / van der Wielen, Audrey / Grégoire, Colette / Lambot, Sébastien	Evaluation of pavement layer thicknesses using GPR: A comparison between full-wave inversion and the straight-ray method	91-104
Elsayed, M. / Ghrib, F. / Nehdi, M. L.	Experimental and analytical study on precast concrete dowel connections under quasi-static loading	692-704
Abdulraheem, Mustafa S. / kadhum, Mohammed M.	Experimental and numerical study on post-fire behaviour of concentrically loaded reinforced reactive powder concrete columns	877-892
Wang, Chao / Chen, Wensu / Hao, Hong / Zhang, Sherong / Song, Ran / Wang, Xiaohua	Experimental investigations of dynamic compressive properties of roller compacted concrete (RCC)	671-682
Wu, Meng / Zhang, Yunsheng / Liu, Guojian / Wu, Zhitao / Yang, Yonggan / Sun, Wei	Experimental study on the performance of lime-based low carbon cementitious materials	780-793
Yang, Xinwen / Shu, Yao / Zhou, Shunhua	An explicit periodic nonlinear model for evaluating dynamic response of damaged slab track involving material nonlinearity of damage in high speed railway	606-621
Mínguez, Jesús / González, Dorys C. / Vicente, Miguel A.	Fiber geometrical parameters of fiber-reinforced high strength concrete and their influence on the residual post-peak flexural tensile strength	906-922
Shon, Chang-Seon / Lee, Dongoun / Kim, Ji-Hyun / Chung, Chul-Woo	Freezing and thawing resistance of cellular concrete containing binary and ternary cementitious mixtures	73-81
Zabihi, Niloufar / Ozkul, M. Hulusi	The fresh properties of nano silica incorporating polymer-modified cement pastes	570-579
Zima, Beata / Rucka, Magdalena	Guided ultrasonic waves for detection of debonding in bars partially embedded in grout	124-142
Moriya, Hirokazu	Identification of similar seismic events using a phase-only correlation technique	984-987
Nie, Shuai / Zhang, Wenqin / Hu, Shuguang / Liu, Zhichao / Wang, Fazhou	Improving the fluid transport properties of heat-cured concrete by internal curing	522-531
Liu, Hankun / Ren, Xiaodan / Li, Jie	Indentation tests based multi-scale random media modeling of concrete	209-220
Panchmatia, Parth / Olek, Jan / Kim, Taehwan	The influence of air cooled blast furnace slag (ACBFS) aggregate on the concentration of sulfates in concrete’s pore solution	394-403
Zhang, Longfei / Liang, Shanqing / Chen, Zhilin	Influence of particle size and addition of recycling phenolic foam on mechanical and flame retardant properties of wood-phenolic composites	1-10
Qudoos, Abdul / Kim, Hong Gi / Ryou, Jae-Suk	Influence of the surface roughness of crushed natural aggregates on the microhardness of the interfacial transition zone of concrete with mineral admixtures and polymer latex	946-957
Omar, Tarek / Nehdi, Moncef L. / Zayed, Tarek	Infrared thermography model for automated detection of delamination in RC bridge decks	313-327
Mai, Anh Duc / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Investigation on the behaviour of partial wrapping in comparison with full wrapping of square RC columns under different loading conditions	153-168
Gautam, Pradeep Kumar / Kalla, Pawan / Nagar, Ravindra / Agrawal, Rahul / Jethoo, Ajay Singh	Laboratory investigations on hot mix asphalt containing mining waste as aggregates	143-152
Farooq, Mohammad Adnan / Mir, Mohammad Shafi / Sharma, Ankit	Laboratory study on use of RAP in WMA pavements using rejuvenator	61-72
Lombillo, I. / Blanco, H. / Villegas, L. / Boffill, Y.	Laboratory validation of the hole-drilling technique on the most common load-bearing walls used in heritage constructions	280-294
Liu, Hui / Zhao, Yunliang / Peng, Changsheng / Song, Shaoxian / López–Valdivieso, Alejandro	Lime mortars – The role of carboxymethyl cellulose on the crystallization of calcium carbonate	169-177
Bocciarelli, Massimiliano / Cattaneo, Sara / Ferrari, Riccardo / Ostinelli, Andrea / Terminio, Andrea	Long-term behavior of self-compacting and normal vibrated concrete: Experiments and code predictions	650-659
Oliver-Ortega, Helena / Chamorro-Trenado, Miquel Àngel / Soler, Jordi / Mutjé, Pere / Vilaseca, Fabiola / Espinach, Francesc X.	Macro and micromechanical preliminary assessment of the tensile strength of particulate rapeseed sawdust reinforced polypropylene copolymer biocomposites for its use as building material	422-430
Dhar, Achyut / Rajasankar, J. / Anandavalli, N.	A mathematical formulation to find effective bulk and shear moduli of recycled aggregate concrete	747-757
Xie, Xiaogeng / Zhang, Tongsheng / Yang, Yongmin / Lin, Ziyu / Wei, Jiangxiong / Yu, Qijun	Maximum paste coating thickness without voids clogging of pervious concrete and its relationship to the rheological properties of cement paste	732-746
Michalik, Boguslaw / de With, Govert / Schroeyers, Wouter	Measurement of radioactivity in building materials – Problems encountered caused by possible disequilibrium in natural decay series	995-1002
Esquinas, A. R. / Motos-Pérez, D. / Jiménez, M. E. / Ramos, C. / Jiménez, J. R. / Fernández, J. M.	Mechanical and durability behaviour of self-compacting concretes for application in the manufacture of hazardous waste containers	442-458
Mohammadinia, Alireza / Disfani, Mahdi M. / Narsilio, Guillermo A. / Aye, Lu	Mechanical behaviour and load bearing mechanism of high porosity permeable pavements utilizing recycled tire aggregates	794-804
Zhang, Ziying / Zhang, Huizhen / Hu, Jun / Qi, Xiaoxiao / Bian, Yang / Shen, Ao / Xu, Pingping / Zhao, Yiangqiang	Microstructure evolution and mechanical properties of briefly heat-treated SAF 2507 super duplex stainless steel welds	338-345
Liu, Cheng / Huang, Ran / Zhang, Yunsheng / Liu, Zhiyong / Zhang, Mingzhong	Modelling of irregular-shaped cement particles and microstructural development of Portland cement	362-378
Gökçe, H. Süleyman / Andiç-Çakir, Özge	A new method for determination of dynamic stability of self-consolidating concrete: 3-Compartment sieve test	305-312
Hawreen, A. / Bogas, J. A. / Dias, A. P. S.	On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes	459-470
Sebaaly, Haissam / Varma, Sudhir / Maina, James W.	Optimizing asphalt mix design process using artificial neural network and genetic algorithm	660-670
Furtado, André / Rodrigues, Hugo / Arêde, António / Varum, Humberto	Out-of-plane behavior of masonry infilled RC frames based on the experimental tests available: A systematic review	831-848
Yıldırım, Gürkan / Sarwary, Mohammad Haroon / Al-Dahawi, Ali / Öztürk, Oğuzhan / Anil, Özgür / Şahmaran, Mustafa	Piezoresistive behavior of CF- and CNT-based reinforced concrete beams subjected to static flexural loading: Shear failure investigation	266-279
Guo, Yiqun / Zhang, Tongsheng / Liu, Xiangyang / Tian, Wenli / Chen, Peng / Wei, Jiangxiong / Yu, Qijun	The pore fillability of cementitious materials and its application in predicting compressive strength of gap-graded blended cements	805-817
Wu, Jiandong / Zhang, Zerui / Zhang, Yi / Li, Dongxu	Preparation and characterization of ultra-lightweight foamed geopolymer (UFG) based on fly ash-metakaolin blends	771-779
Cao, Ming / Wang, Chuanyong / Xia, Ru / Chen, Peng / Miao, Jibin / Yang, Bin / Qian, Jiasheng / Tang, Yongzhi	Preparation and performance of the modified high-strength/high-modulus polyvinyl alcohol fiber/polyurethane grouting materials	482-489
Liu, Jia / Qu, Weilian / Nikitas, Nikolaos / Ji, Zeliang	Research on extending the fatigue life of railway steel bridges by using intelligent control	532-546
Du, Yinfei / Chen, Jiaqi / Han, Zheng / Liu, Weizheng	A review on solutions for improving rutting resistance of asphalt pavement and test methods	893-905
Mohammed, A. / Sanjayan, J. G. / Nazari, A. / Al-Saadi, N. T. K.	The role of graphene oxide in limited long-term carbonation of cement-based matrix	858-866
Abbas, Y. M.	Simplex-lattice strength and permeability optimization of concrete incorporating silica fume and natural pozzolan	199-208
Vilar, Juan / Vázquez-Herrero, Cristina M. / Mendoza, Carlos Javier / Meli, Roberto / Aire, Carlos	Statistical validation of new maturity functions for high-strength self-consolidating concrete mixes	931-945
Binas, V. / Papadaki, D. / Maggos, Th. / Katsanaki, A. / Kiriakidis, G.	Study of innovative photocatalytic cement based coatings: The effect of supporting materials	923-930
Sirdesai, N. N. / Gupta, Tushar / Singh, T. N. / Ranjith, P. G.	Studying the acoustic emission response of an Indian monumental sandstone under varying temperatures and strains	346-361
Shin, Hyun-Oh / Min, Kyung-Hwan / Mitchell, Denis	Uniaxial behavior of circular ultra-high-performance fiber-reinforced concrete columns confined by spiral reinforcement	379-393
Swamy, Aravind Krishna / Matolia, Varun / Ramana, G. V.	Use of angle of repose of aggregates as an indicator of asphalt concrete properties	849-857
Pepin, S.	Using RESRAD-BUILD to assess the external dose from the natural radioactivity of building materials	1003-1007
Gibeaux, Soizic / Vazquez, Patricia / De Kock, Tim / Cnudde, Veerle / Thomachot-Schneider, Celine	Weathering assessment under X-ray tomography of building stones exposed to acid atmospheres at current pollution rate	187-198
Vaičiukynienė, Danutė / Michalik, Boguslaw / Bonczyk, Michał / Vaičiukynas, Vilimantas / Kantautas, Aras / Krulikauskaitė, Jūratė	Zeolitized bottom ashes from biomass combustion as cement replacing components	988-994

About this
data sheet
IssueID
35497
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - April 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - April 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.