Construction and Building Materials - avril 2018

Publié:	avril 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Dong, Biqin / Ding, Weijian / Qin, Shaofeng / Fang, Guohao / Liu, Yuqing / Dong, Peng / Han, Shiwen / Xing, Feng / Hong, Shuxian	3D visualized tracing of rebar corrosion-inhibiting features in concrete with a novel chemical self-healing system	11-20
Muñoz, I. / Cifrian, E. / Andrés, A. / Miguel, G. San / Ruiz, D. / Viguri, J. R.	Analysis of environmental benefits associated with the incorporation of Waelz slag into fired bricks using LCA	178-186
Isailović, Ivan / Wistuba, Michael P.	Asphalt mixture layers’ interface bonding properties under monotonic and cyclic loading	590-597
Ibrahim, Mohamed Atef / Sharkawi, Alaa El-Din M. / El-Attar, Mohamed M. / Hodhod, Osama A.	Assessing the corrosion performance for concrete mixtures made of blended cements	21-30
Wood, Stephanie G. / Giannini, Eric R. / Ramsey, Monica A. / Moser, Robert D.	Autoclave test parameters for determining alkali-silica reactivity of concrete aggregates	683-691
Liu, Jie-Peng / Xu, Tian-Xiang / Wang, Yu-Hang / Guo, Ying	Axial behaviour of circular steel tubed concrete stub columns confined by CFRP materials	221-231
Ong, Chee Beng / Chang, Wen-Shao / Ansell, Martin P. / Brandon, Daniel / Sterley, Magdalena / Walker, Pete	Bench-scale fire tests of Dark Red Meranti and Spruce finger joints in tension	257-265
Cui, Wei / Yan, Wei-shuo / Song, Hui-fang / Wu, Xin-li	Blocking analysis of fresh self-compacting concrete based on the DEM	412-421
Deng, Mingke / Pan, Jiaojiao / Sun, Hongzhe	Bond behavior of steel bar embedded in Engineered Cementitious Composites under pullout load	705-714
Song, Zhengyang / Frühwirt, Thomas / Konietzky, Heinz	Characteristics of dissipated energy of concrete subjected to cyclic loading	47-60
Yuan, Jie / Wu, Yue / Zhang, Jiake	Characterization of air voids and frost resistance of concrete based on industrial computerized tomographical technology	975-983
Khoshnazar, Rahil / Shao, Yixin	Characterization of carbonation-cured cement paste using X-ray photoelectron spectroscopy	598-605
Kadhim, Ihsan Taha / Güneyisi, Esra Mete	Code based assessment of load capacity of steel tubular columns infilled with recycled aggregate concrete under compression	715-731
Li, L. G. / Zheng, J. Y. / Zhu, J. / Kwan, A. K. H.	Combined usage of micro-silica and nano-silica in concrete: SP demand, cementing efficiencies and synergistic effect	622-632
Jamshidi, Ali / Mohd Hasan, Mohd Rosli / Lee, Mei Ting	Comparative study on engineering properties and energy efficiency of asphalt mixes incorporating fly ash and cement	295-304
Lv, Quan / Huang, Weidong / Tang, Naipeng / Xiao, Feipeng	Comparison and relationship between indices for the characterization of the moisture resistance of asphalt–aggregate systems	580-589
Li, Beixing / Lv, Xingdong / Dong, Yun / Zhou, Shihua / Zhang, Jianfeng	Comparison of the retarding mechanisms of sodium gluconate and amino trimethylene phosphonic acid on cement hydration and the influence on cement performance	958-965
Richardson, I. G. / Li, S.	Composition and structure of an 18-year-old 5M KOH-activated ground granulated blast-furnace slag paste	404-411
Delongui, Lucas / Matuella, Matheus / Núñez, Washington Peres / Fedrigo, William / da Silva Filho, Luiz Carlos Pinto / Ceratti, Jorge Augusto Pereira	Construction and demolition waste parameters for rational pavement design	105-112
Zhang, Yong / Xu, Xiang / Liu, Shuran / Chen, Tengteng / Hu, Zhongwei	Crashworthiness design for bi-graded composite circular structures	633-649
Lee, Hyuk / Vimonsatit, Vanissorn / Chindaprasirt, Prinya / Ngo, Tuan / Mendis, Priyan	Creep properties of cement and alkali activated fly ash materials using nanoindentation technique	547-555
Zeng, Xiaohui / Li, Yirui / Ran, Yuzhou / Yang, Kai / Qu, Fulin / Wang, Ping	Deterioration mechanism of CA mortar due to simulated acid rain	1008-1015
Habibi, Alireza / Ghomashi, Jian	Development of an optimum mix design method for self-compacting concrete based on experimental results	113-123
Luo, Rong / Lv, Huijie / Liu, Hanqi	Development of Prony series models based on continuous relaxation spectrums for relaxation moduli determined using creep tests	758-770
Kim, Sun Gil / Park, Jun Kil / Kim, Dong joo	Direct tensile responses of aramid fiber reinforced cementitious composites and textile reinforced cementitious composites with 3D spacer fabric at high strain rates	232-243
Bravo, M. / de Brito, J. / Evangelista, L. / Pacheco, J.	Durability and shrinkage of concrete with CDW as recycled aggregates: Benefits from superplasticizer’s incorporation and influence of CDW composition	818-830
McIsaac, Anne / Fam, Amir	Durability under freeze–thaw cycles of concrete beams retrofitted with externally bonded FRPs using bio-based resins	244-256
Berrio, Ariel / Rodriguez, Claudia / Tobón, Jorge I.	Effect of Al2O3/SiO2 ratio on ye’elimite production on CSA cement	512-521
McIsaac, Anne / Fam, Amir	The effect of bio-based content in resin blends on tensile properties of FRP wet layup systems	328-337
Vejmelková, Eva / Koňáková, Dana / Doleželová, Magdalena / Scheinherrová, Lenka / Svora, Petr / Keppert, Martin / Reiterman, Pavel / Černý, Robert	Effect of calcined Czech claystone on the properties of high performance concrete: Microstructure, strength and durability	966-974
Lin, Cong / Tongjing, Wang	Effect of fine aggregate angularity on skid-resistance of asphalt pavement using accelerated pavement testing	41-46
Doleželová, Magdalena / Scheinherrová, Lenka / Krejsová, Jitka / Vimmrová, Alena	Effect of high temperatures on gypsum-based composites	82-90
López-Montero, Teresa / Crucho, João / Picado-Santos, Luís / Miró, Rodrigo	Effect of nanomaterials on ageing and moisture damage using the indirect tensile strength test	31-40
Zachariah, Jince P. / Sarkar, Partha Pratim / Debnath, Barnali / Pal, Manish	Effect of polypropylene fibres on bituminous concrete with brick as aggregate	867-876
Gao, Yang / Song, Zhigang / Xu, Qing	Effect of SnSO4 on physical and chemical properties of cement	490-500
Liu, Guoqiang / Yang, Tao / Li, Jing / Jia, Yanshun / Zhao, Yongli / Zhang, Jiupeng	Effects of aging on rheological properties of asphalt materials and asphalt-filler interaction ability	501-511
Ding, Xinxin / Li, Changyong / Han, Bing / Lu, Yazhao / Zhao, Shunbo	Effects of different deformed steel-fibers on preparation and fundamental properties of self-compacting SFRC	471-481
Akca, Abdullah Huzeyfe / Ozyurt, Nilufer	Effects of re-curing on microstructure of concrete after high temperature exposure	431-441
Abbass, Wasim / Khan, M. Iqbal / Mourad, Shehab	Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete	556-569
De Coster, Albéric / van der Wielen, Audrey / Grégoire, Colette / Lambot, Sébastien	Evaluation of pavement layer thicknesses using GPR: A comparison between full-wave inversion and the straight-ray method	91-104
Elsayed, M. / Ghrib, F. / Nehdi, M. L.	Experimental and analytical study on precast concrete dowel connections under quasi-static loading	692-704
Abdulraheem, Mustafa S. / kadhum, Mohammed M.	Experimental and numerical study on post-fire behaviour of concentrically loaded reinforced reactive powder concrete columns	877-892
Wang, Chao / Chen, Wensu / Hao, Hong / Zhang, Sherong / Song, Ran / Wang, Xiaohua	Experimental investigations of dynamic compressive properties of roller compacted concrete (RCC)	671-682
Wu, Meng / Zhang, Yunsheng / Liu, Guojian / Wu, Zhitao / Yang, Yonggan / Sun, Wei	Experimental study on the performance of lime-based low carbon cementitious materials	780-793
Yang, Xinwen / Shu, Yao / Zhou, Shunhua	An explicit periodic nonlinear model for evaluating dynamic response of damaged slab track involving material nonlinearity of damage in high speed railway	606-621
Mínguez, Jesús / González, Dorys C. / Vicente, Miguel A.	Fiber geometrical parameters of fiber-reinforced high strength concrete and their influence on the residual post-peak flexural tensile strength	906-922
Shon, Chang-Seon / Lee, Dongoun / Kim, Ji-Hyun / Chung, Chul-Woo	Freezing and thawing resistance of cellular concrete containing binary and ternary cementitious mixtures	73-81
Zabihi, Niloufar / Ozkul, M. Hulusi	The fresh properties of nano silica incorporating polymer-modified cement pastes	570-579
Zima, Beata / Rucka, Magdalena	Guided ultrasonic waves for detection of debonding in bars partially embedded in grout	124-142
Moriya, Hirokazu	Identification of similar seismic events using a phase-only correlation technique	984-987
Nie, Shuai / Zhang, Wenqin / Hu, Shuguang / Liu, Zhichao / Wang, Fazhou	Improving the fluid transport properties of heat-cured concrete by internal curing	522-531
Liu, Hankun / Ren, Xiaodan / Li, Jie	Indentation tests based multi-scale random media modeling of concrete	209-220
Panchmatia, Parth / Olek, Jan / Kim, Taehwan	The influence of air cooled blast furnace slag (ACBFS) aggregate on the concentration of sulfates in concrete’s pore solution	394-403
Zhang, Longfei / Liang, Shanqing / Chen, Zhilin	Influence of particle size and addition of recycling phenolic foam on mechanical and flame retardant properties of wood-phenolic composites	1-10
Qudoos, Abdul / Kim, Hong Gi / Ryou, Jae-Suk	Influence of the surface roughness of crushed natural aggregates on the microhardness of the interfacial transition zone of concrete with mineral admixtures and polymer latex	946-957
Omar, Tarek / Nehdi, Moncef L. / Zayed, Tarek	Infrared thermography model for automated detection of delamination in RC bridge decks	313-327
Mai, Anh Duc / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Investigation on the behaviour of partial wrapping in comparison with full wrapping of square RC columns under different loading conditions	153-168
Gautam, Pradeep Kumar / Kalla, Pawan / Nagar, Ravindra / Agrawal, Rahul / Jethoo, Ajay Singh	Laboratory investigations on hot mix asphalt containing mining waste as aggregates	143-152
Farooq, Mohammad Adnan / Mir, Mohammad Shafi / Sharma, Ankit	Laboratory study on use of RAP in WMA pavements using rejuvenator	61-72
Lombillo, I. / Blanco, H. / Villegas, L. / Boffill, Y.	Laboratory validation of the hole-drilling technique on the most common load-bearing walls used in heritage constructions	280-294
Liu, Hui / Zhao, Yunliang / Peng, Changsheng / Song, Shaoxian / López–Valdivieso, Alejandro	Lime mortars – The role of carboxymethyl cellulose on the crystallization of calcium carbonate	169-177
Bocciarelli, Massimiliano / Cattaneo, Sara / Ferrari, Riccardo / Ostinelli, Andrea / Terminio, Andrea	Long-term behavior of self-compacting and normal vibrated concrete: Experiments and code predictions	650-659
Oliver-Ortega, Helena / Chamorro-Trenado, Miquel Àngel / Soler, Jordi / Mutjé, Pere / Vilaseca, Fabiola / Espinach, Francesc X.	Macro and micromechanical preliminary assessment of the tensile strength of particulate rapeseed sawdust reinforced polypropylene copolymer biocomposites for its use as building material	422-430
Dhar, Achyut / Rajasankar, J. / Anandavalli, N.	A mathematical formulation to find effective bulk and shear moduli of recycled aggregate concrete	747-757
Xie, Xiaogeng / Zhang, Tongsheng / Yang, Yongmin / Lin, Ziyu / Wei, Jiangxiong / Yu, Qijun	Maximum paste coating thickness without voids clogging of pervious concrete and its relationship to the rheological properties of cement paste	732-746
Michalik, Boguslaw / de With, Govert / Schroeyers, Wouter	Measurement of radioactivity in building materials – Problems encountered caused by possible disequilibrium in natural decay series	995-1002
Esquinas, A. R. / Motos-Pérez, D. / Jiménez, M. E. / Ramos, C. / Jiménez, J. R. / Fernández, J. M.	Mechanical and durability behaviour of self-compacting concretes for application in the manufacture of hazardous waste containers	442-458
Mohammadinia, Alireza / Disfani, Mahdi M. / Narsilio, Guillermo A. / Aye, Lu	Mechanical behaviour and load bearing mechanism of high porosity permeable pavements utilizing recycled tire aggregates	794-804
Zhang, Ziying / Zhang, Huizhen / Hu, Jun / Qi, Xiaoxiao / Bian, Yang / Shen, Ao / Xu, Pingping / Zhao, Yiangqiang	Microstructure evolution and mechanical properties of briefly heat-treated SAF 2507 super duplex stainless steel welds	338-345
Liu, Cheng / Huang, Ran / Zhang, Yunsheng / Liu, Zhiyong / Zhang, Mingzhong	Modelling of irregular-shaped cement particles and microstructural development of Portland cement	362-378
Gökçe, H. Süleyman / Andiç-Çakir, Özge	A new method for determination of dynamic stability of self-consolidating concrete: 3-Compartment sieve test	305-312
Hawreen, A. / Bogas, J. A. / Dias, A. P. S.	On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes	459-470
Sebaaly, Haissam / Varma, Sudhir / Maina, James W.	Optimizing asphalt mix design process using artificial neural network and genetic algorithm	660-670
Furtado, André / Rodrigues, Hugo / Arêde, António / Varum, Humberto	Out-of-plane behavior of masonry infilled RC frames based on the experimental tests available: A systematic review	831-848
Yıldırım, Gürkan / Sarwary, Mohammad Haroon / Al-Dahawi, Ali / Öztürk, Oğuzhan / Anil, Özgür / Şahmaran, Mustafa	Piezoresistive behavior of CF- and CNT-based reinforced concrete beams subjected to static flexural loading: Shear failure investigation	266-279
Guo, Yiqun / Zhang, Tongsheng / Liu, Xiangyang / Tian, Wenli / Chen, Peng / Wei, Jiangxiong / Yu, Qijun	The pore fillability of cementitious materials and its application in predicting compressive strength of gap-graded blended cements	805-817
Wu, Jiandong / Zhang, Zerui / Zhang, Yi / Li, Dongxu	Preparation and characterization of ultra-lightweight foamed geopolymer (UFG) based on fly ash-metakaolin blends	771-779
Cao, Ming / Wang, Chuanyong / Xia, Ru / Chen, Peng / Miao, Jibin / Yang, Bin / Qian, Jiasheng / Tang, Yongzhi	Preparation and performance of the modified high-strength/high-modulus polyvinyl alcohol fiber/polyurethane grouting materials	482-489
Liu, Jia / Qu, Weilian / Nikitas, Nikolaos / Ji, Zeliang	Research on extending the fatigue life of railway steel bridges by using intelligent control	532-546
Du, Yinfei / Chen, Jiaqi / Han, Zheng / Liu, Weizheng	A review on solutions for improving rutting resistance of asphalt pavement and test methods	893-905
Mohammed, A. / Sanjayan, J. G. / Nazari, A. / Al-Saadi, N. T. K.	The role of graphene oxide in limited long-term carbonation of cement-based matrix	858-866
Abbas, Y. M.	Simplex-lattice strength and permeability optimization of concrete incorporating silica fume and natural pozzolan	199-208
Vilar, Juan / Vázquez-Herrero, Cristina M. / Mendoza, Carlos Javier / Meli, Roberto / Aire, Carlos	Statistical validation of new maturity functions for high-strength self-consolidating concrete mixes	931-945
Binas, V. / Papadaki, D. / Maggos, Th. / Katsanaki, A. / Kiriakidis, G.	Study of innovative photocatalytic cement based coatings: The effect of supporting materials	923-930
Sirdesai, N. N. / Gupta, Tushar / Singh, T. N. / Ranjith, P. G.	Studying the acoustic emission response of an Indian monumental sandstone under varying temperatures and strains	346-361
Shin, Hyun-Oh / Min, Kyung-Hwan / Mitchell, Denis	Uniaxial behavior of circular ultra-high-performance fiber-reinforced concrete columns confined by spiral reinforcement	379-393
Swamy, Aravind Krishna / Matolia, Varun / Ramana, G. V.	Use of angle of repose of aggregates as an indicator of asphalt concrete properties	849-857
Pepin, S.	Using RESRAD-BUILD to assess the external dose from the natural radioactivity of building materials	1003-1007
Gibeaux, Soizic / Vazquez, Patricia / De Kock, Tim / Cnudde, Veerle / Thomachot-Schneider, Celine	Weathering assessment under X-ray tomography of building stones exposed to acid atmospheres at current pollution rate	187-198
Vaičiukynienė, Danutė / Michalik, Boguslaw / Bonczyk, Michał / Vaičiukynas, Vilimantas / Kantautas, Aras / Krulikauskaitė, Jūratė	Zeolitized bottom ashes from biomass combustion as cement replacing components	988-994

Informations
sur cette fiche
IssueID
35497
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - avril 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - avril 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.