Construction and Building Materials - April 2018

Published:	April 2018

Articles in this Issue

Author(s)	Title	Page(s)
Abdelatif, Amged O. / Ožbolt, Jośko / Gambarelli, Serena	3D finite element modelling of corrosion of lap splice joints in concrete	124-131
Kizinievič, Olga / Kizinievič, Viktor / Malaiškienė, Jurgita	Analysis of the effect of paper sludge on the properties, microstructure and frost resistance of clay bricks	689-696
Li, Peilong / Jiang, Xiuming / Ding, Zhan / Zhao, Junkai / Shen, Minghan	Analysis of viscosity and composition properties for crumb rubber modified asphalt	638-647
Zhang, Zhiqing / Cong, Chengdong / Xi, WenBo / Li, Shiyun	Application research on the performances of pavement structure with foamed asphalt cold recycling mixture	396-402
Shamseldein, Ayman / Elshafie, Hany / Rashad, Ahmed / Kohail, M.	Assessment and restoration of bond strength of heat-damaged reinforced concrete elements	425-435
Guo, Yunlong / Markine, Valéri / Song, Jianing / Jing, Guoqing	Ballast degradation: Effect of particle size and shape using Los Angeles Abrasion test and image analysis	414-424
Abo Sabah, S. H. / Kueh, A. B. H. / Al-Fasih, M. Y.	Bio-inspired vs. conventional sandwich beams: A low-velocity repeated impact behavior exploration	193-204
Trujillo, Pasquale Basso / Jolin, Marc / Massicotte, Bruno / Bissonnette, Benoît	Bond strength of reinforcing bars encased with shotcrete	678-688
Xu, S. / Tabaković, A. / Liu, X. / Schlangen, E.	Calcium alginate capsules encapsulating rejuvenator as healing system for asphalt mastic	379-387
Zahra, Tatheer / Dhanasekar, Manicka	Characterisation and strategies for mitigation of the contact surface unevenness in dry-stack masonry	612-628
Siddiqua, Sumi / Barreto, Priscila N. M.	Chemical stabilization of rammed earth using calcium carbide residue and fly ash	364-371
Wang, Dezhi / Zhou, Xiangming / Fu, Bo / Zhang, Lirong	Chloride ion penetration resistance of concrete containing fly ash and silica fume against combined freezing-thawing and chloride attack	740-747
Li, Qiang / Wang, Zhibing / Li, Yuliang / Shang, Jianlin	Cold recycling of lime-fly ash stabilized macadam mixtures as pavement bases and subbases	306-314
Roman, Claudia / García-Morales, Moisés	Comparative assessment of the effect of micro- and nano- fillers on the microstructure and linear viscoelasticity of polyethylene-bitumen mastics	83-92
Kaur, Kamaldeep / Singh, Jaspal / Kaur, Manpreet	Compressive strength of rice husk ash based geopolymer: The effect of alkaline activator	188-192
Mandal, Tirupan / Yin, Hao / Ji, Richard	Correlating laboratory and full-scale reflective cracking tests for airfield pavements	47-58
Netinger Grubeša, Ivanka / Barišić, Ivana / Ducman, Vilma / Korat, Lidija	Draining capability of single-sized pervious concrete	252-260
Hayles, Meika / Sanchez, Leandro F. M. / Noël, Martin	Eco-efficient low cement recycled concrete aggregate mixtures for structural applications	724-732
Abdulkareem, Omar M. / Ben Fraj, Amor / Bouasker, Marwen / Khelidj, Abdelhafid	Effect of chemical and thermal activation on the microstructural and mechanical properties of more sustainable UHPC	567-577
Hashemi, Mohammad / Shafigh, Payam / Bin Karim, Mohamed Rehan / Atis, Cengiz Duran	The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement	553-566
Mi, Zhengxiang / Hu, Yu / Li, Qingbin / An, Zaizhan	Effect of curing humidity on the fracture properties of concrete	403-413
Oskouei, Asghar Vatani / Jafari, Armin / Bazli, Milad / Ghahri, Rasool	Effect of different retrofitting techniques on in-plane behavior of masonry wallettes	578-590
Son, H. M. / Park, S. M. / Jang, J. G. / Lee, H. K.	Effect of nano-silica on hydration and conversion of calcium aluminate cement	819-825
Peng, Chao / Chen, Pengxu / You, Zhanping / Lv, Songtao / Zhang, Ran / Xu, Fang / Zhang, Hao / Chen, Hanlin	Effect of silane coupling agent on improving the adhesive properties between asphalt binder and aggregates	591-600
de Azevedo, Nagilla Huerb / Gleize, Philippe J. P.	Effect of silicon carbide nanowhiskers on hydration and mechanical properties of a Portland cement paste	388-395
Miao, Yinghao / Wang, Sudi / Guo, Liyan / Zheng, Xiaoheng / Huang, Yucheng / Wang, Linbing	Effect of temperature on deformation properties of unbound granular materials containing fine RAP	443-451
Vaitkevičius, Vitoldas / Šerelis, Evaldas / Kerševičius, Vidas	Effect of ultra-sonic activation on early hydration process in 3D concrete printing technology	354-363
Kanchanason, V. / Plank, J.	Effectiveness of a calcium silicate hydrate – Polycarboxylate ether (C-S-H–PCE) nanocomposite on early strength development of fly ash cement	20-27
Garijo, Lucía / Zhang, Xiaoxin / Ruiz, Gonzalo / Ortega, José Joaquín / Wu, Zhimin	The effects of dosage and production process on the mechanical and physical properties of natural hydraulic lime mortars	325-334
Siddig, Elfadil A. A. / Feng, Cheng Pei / Ming, Li Yi	Effects of ethylene vinyl acetate and nanoclay additions on high-temperature performance of asphalt binders	276-282
Çomak, Bekir / Bideci, Alper / Sallı Bideci, Özlem	Effects of hemp fibers on characteristics of cement based mortar	794-799
Min, Hongguang / Zhang, Weiping / Gu, Xianglin	Effects of load damage on moisture transport and relative humidity response in concrete	59-68
Wang, Nan / Yu, Hongfa / Bi, Wanli / Tan, Yongshan / Zhang, Na / Wu, Chengyou / Ma, Haiyan / Hua, Shi	Effects of sodium citrate and citric acid on the properties of magnesium oxysulfate cement	697-704
Li, Hedong / Li, Bo / Jin, Ruoyu / Li, Shan / Yu, Jin-Guang	Effects of sustained loading and corrosion on the performance of reinforced concrete beams	179-187
Al-Rousan, Rajai Z.	Empirical and NLFEA prediction of bond-slip behavior between DSSF concrete and anchored CFRP composites	530-542
Evangelista, Patricia P. A. / Kiperstok, Asher / Torres, Ednildo A. / Gonçalves, Jardel P.	Environmental performance analysis of residential buildings in Brazil using life cycle assessment (LCA)	748-761
Tarawneh, Bashar / Sbitnev, Andrey / Hakam, Yasser	Estimation of pressuremeter modulus and limit pressure from Cone Penetration Test for desert sands	299-305
Bonifazi, Giuseppe / Palmieri, Roberta / Serranti, Silvia	Evaluation of attached mortar on recycled concrete aggregates by hyperspectral imaging	835-842
Vo, My Linh / Plank, Johann	Evaluation of natural rubber latex as film forming additive in cementitious mortar	93-99
Nguyen, Khoa Tan / Le, Tuan Anh / Lee, Kihak	Evaluation of the mechanical properties of sea sand-based geopolymer concrete and the corrosion of embedded steel bar	462-472
Ortiz Navas, F. / Navarro-Gregori, Juan / Leiva Herdocia, G. / Serna, P. / Cuenca, E.	An experimental study on the shear behaviour of reinforced concrete beams with macro-synthetic fibres	888-899
Mohammadhosseini, Hossein / Tahir, Mahmood Md. / Sam, Abdul Rahman Mohd	The feasibility of improving impact resistance and strength properties of sustainable concrete composites by adding waste metalized plastic fibres	223-236
Alnahhal, Wael / Aljidda, Omar	Flexural behavior of basalt fiber reinforced concrete beams with recycled concrete coarse aggregates	165-178
Liu, Sai / Zhu, Deju / Li, Gaosheng / Yao, Yiming / Ou, Yunfu / Shi, Caijun / Du, Yunxing	Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads	859-876
Rasheed, M. Abdur / Prakash, S. Suriya / Raju, Gangadharan / Kawasaki, Yuma	Fracture studies on synthetic fiber reinforced cellular concrete using acoustic emission technique	100-112
Shen, Haiying / Zhang, Shaodi / Cao, Jinzhen / Jiang, Jun / Wang, Wang	Improving anti-weathering performance of thermally modified wood by TiO 2 sol or/and paraffin emulsion	372-378
Çalışıcı, Mustafa / Gürü, Metin / Çubuk, M. Kürşat / Cansız, Ömer Faruk	Improving the aging resistance of bitumen by addition of polymer based diethylene glycol	283-288
Li, Ye / Tan, Kang Hai / Yang, En-Hua	Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature	629-637
Li, Lin / Wang, Ru / Lu, Qinyuan	Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar	911-922
Peng, Quanmin / Wang, Li / Lu, Qun	Influence of recycled coarse aggregate replacement percentage on fatigue performance of recycled aggregate concrete	347-353
Sharma, Devesh K. / Sharma, Rekha	Influence of rice husk ash and rice tiller ash along with chromate reducing agents on strength and hydration properties of Ordinary Portland Cement	843-850
Li, Guo / Yue, Jiang / Guo, Chenhao / Ji, Yongsheng	Influences of modified nanoparticles on hydrophobicity of concrete with organic film coating	1-7
Tong, Zheng / Gao, Jie / Zhang, Haitao	Innovative method for recognizing subgrade defects based on a convolutional neural network	69-82
Ding, Qingjun / Yang, Jun / Hou, Dongshuai / Zhang, Gaozhan	Insight on the mechanism of sulfate attacking on the cement paste with granulated blast furnace slag: An experimental and molecular dynamics study	601-611
Negi, P. / Chakraborty, T. / Kaur, Naveet / Bhalla, Suresh	Investigations on effectiveness of embedded PZT patches at varying orientations for monitoring concrete hydration using EMI technique	489-498
Cong, Lin / Wang, Tongjing / Tan, Le / Yuan, Junjie / Shi, Jiachen	Laboratory evaluation on performance of porous polyurethane mixtures and OGFC	436-442
Li, Jun / Cui, Xin-zhuang / Jin, Qing / Su, Jun-wei / Cui, She-qiang / Wang, Yi-Lin	Laboratory investigation of the durability of a new smart geosynthetic material	28-33
Al-Mosawe, Hasan / Thom, Nick / Airey, Gordon / Albayati, Amjad	Linear viscous approach to predict rut depth in asphalt mixtures	775-793
Wang, Ziguo / Sun, Yuyan / Wu, Hao / Zhang, Chunwei	Low velocity impact resistance of bio-inspired building ceramic composites with nacre-like structure	851-858
Khodabakhshian, Ali / de Brito, Jorge / Ghalehnovi, Mansour / Asadi Shamsabadi, Elyas	Mechanical, environmental and economic performance of structural concrete containing silica fume and marble industry waste powder	237-251
Thai, Duc-Kien / Kim, Seung-Eock / Bui, Tinh Quoc	Modified empirical formulas for predicting the thickness of RC panels under impact loading	261-275
Perlin, Lourenço Panosso / do Valle, Ângela / Pinto, Roberto Caldas de Andrade	New method to locate the pith position in a wood cross-section based on ultrasonic measurements	733-739
Aicher, Simon / Tapia, Cristóbal	Novel internally LVL-reinforced glued laminated timber beams with large holes	662-677
Somé, Saannibe Ciryle / Feeser, Arnaud / Pavoine, Alexandre	Numerical and experimental investigation of mode I cracking of asphalt concrete using semi-circular bending test	34-46
Majidi, Behzad / Rolfe, Philip / Fafard, Mario / Ziegler, Donald P. / Alamdari, Houshang	Numerical modeling of compaction and flow of coke/pitch mixtures using discrete element method	315-324
Song, Qiulei / Yu, Rui / Shui, Zhonghe / Wang, Xinpeng / Rao, Suduan / Lin, Zewen	Optimization of fibre orientation and distribution for a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): Experiments and mechanism analysis	8-19
Gama, Dennyele A. / Yan, Yu / Rodrigues, John Kennedy G. / Roque, Reynaldo	Optimizing the use of reactive terpolymer, polyphosphoric acid and high-density polyethylene to achieve asphalt binders with superior performance	522-529
Hiremath, Parameshwar N. / Yaragal, Subhash C.	Performance evaluation of reactive powder concrete with polypropylene fibers at elevated temperatures	499-512
Mashaly, Ahmed O. / Shalaby, Basel N. / Rashwan, Mohammed A.	Performance of mortar and concrete incorporating granite sludge as cement replacement	800-818
Jerônimo, Valdith Lopes / Meira, Gibson Rocha / da Silva Filho, Luiz Carlos Pinto	Performance of self-compacting concretes with wastes from heavy ceramic industry against corrosion by chlorides	900-910
Zehtabchi, Ali / Hashemi, Seyed Amir Hossein / Asadi, Somayeh	Predicting the strength of polymer-modified thin-layer asphalt with fuzzy logic	826-834
Zhang, Dong / Chen, Meizhu / Wu, Shaopeng / Liu, Quantao / Wan, Jiuming	Preparation of expanded graphite/polyethylene glycol composite phase change material for thermoregulation of asphalt binder	513-521
Gomes, S. / Dias-Da-Costa, D. / Neves, L. A. C. / Hadigheh, S. A. / Fernandes, P. / Júlio, E.	Probabilistic-based characterisation of the mechanical properties of CFRP laminates	132-141
Lameiras, Rodrigo / Barros, Joaquim A. O. / Valente, Isabel B. / Xavier, José / Azenha, Miguel	Pull-out behaviour of glass-fibre reinforced polymer perforated plate connectors embedded in concrete. Part II: Prediction of load carrying capacity	142-164
Martínez Fernández, Pablo / Hidalgo Signes, Carlos / Villalba Sanchís, Ignacio / Pérez Mira, Domingo / Insa Franco, Ricardo	Real scale evaluation of vibration mitigation of sub-ballast layers with added tyre-derived aggregate	335-346
Zeng, Yihua / Botte, Wouter / Caspeele, Robby	Reliability analysis of FRP strengthened RC beams considering compressive membrane action	473-488
Mukhtar, Faisal M. / Faysal, Rayhan M.	A review of test methods for studying the FRP-concrete interfacial bond behavior	877-887
Zhang, Peng / Dai, Yuqing / Ding, Xiaoya / Zhou, Chunsheng / Xue, Xiao / Zhao, Tiejun	Self-healing behaviour of multiple microcracks of strain hardening cementitious composites (SHCC)	705-715
Walubita, Lubinda F. / Nyamuhokya, Tito P. / Naik, Bhaven / Holleran, Irina / Dessouky, Samer	Sensitivity analysis and validation of the Simple Punching Shear Test (SPST) for screening HMA mixes	205-214
Siddique, Salman / Shrivastava, Sandeep / Chaudhary, Sandeep / Gupta, Trilok	Strength and impact resistance properties of concrete containing fine bone china ceramic aggregate	289-298
Song, Haemin / Jeong, Yeonung / Bae, Sungchul / Jun, Yubin / Yoon, Seyoon / Oh, Jae Eun	A study of thermal decomposition of phases in cementitious systems using HT-XRD and TG	648-661
Qian, Shanshan / Yao, Yan / Wang, Ziming / Cui, Suping / Liu, Xiao / Jiang, Haidong / Guo, Zhaolai / Lai, Guanghong / Xu, Qian / Guan, Jianan	Synthesis, characterization and working mechanism of a novel polycarboxylate superplasticizer for concrete possessing reduced viscosity	452-461
Zhang, Meng / Qian, Zhendong / Zhou, Yadong / Liu, Yang	Test and evaluation for effects of aggregates fragmentation on performance of lightweight asphalt concrete	215-222
Ma, Gao / Li, Hui / Yan, Libo / Huang, Liang	Testing and analysis of basalt FRP-confined damaged concrete cylinders under axial compression loading	762-774
Madrid, Maggi / Orbe, Aimar / Carré, Hélène / García, Yokasta	Thermal performance of sawdust and lime-mud concrete masonry units	113-123
Lin, Peng / Huang, Weidong / Tang, Naipeng / Xiao, Feipeng / Li, Yi	Understanding the low temperature properties of Terminal Blend hybrid asphalt through chemical and thermal analysis methods	543-552
Jadhav, Umesh U. / Lahoti, Mukund / Chen, Zhitao / Qiu, Jishen / Cao, Bin / Yang, En-Hua	Viability of bacterial spores and crack healing in bacteria-containing geopolymer	716-723

About this
data sheet
IssueID
35495
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - April 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - April 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.