Construction and Building Materials - avril 2018

Publié:	avril 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Abdelatif, Amged O. / Ožbolt, Jośko / Gambarelli, Serena	3D finite element modelling of corrosion of lap splice joints in concrete	124-131
Kizinievič, Olga / Kizinievič, Viktor / Malaiškienė, Jurgita	Analysis of the effect of paper sludge on the properties, microstructure and frost resistance of clay bricks	689-696
Li, Peilong / Jiang, Xiuming / Ding, Zhan / Zhao, Junkai / Shen, Minghan	Analysis of viscosity and composition properties for crumb rubber modified asphalt	638-647
Zhang, Zhiqing / Cong, Chengdong / Xi, WenBo / Li, Shiyun	Application research on the performances of pavement structure with foamed asphalt cold recycling mixture	396-402
Shamseldein, Ayman / Elshafie, Hany / Rashad, Ahmed / Kohail, M.	Assessment and restoration of bond strength of heat-damaged reinforced concrete elements	425-435
Guo, Yunlong / Markine, Valéri / Song, Jianing / Jing, Guoqing	Ballast degradation: Effect of particle size and shape using Los Angeles Abrasion test and image analysis	414-424
Abo Sabah, S. H. / Kueh, A. B. H. / Al-Fasih, M. Y.	Bio-inspired vs. conventional sandwich beams: A low-velocity repeated impact behavior exploration	193-204
Trujillo, Pasquale Basso / Jolin, Marc / Massicotte, Bruno / Bissonnette, Benoît	Bond strength of reinforcing bars encased with shotcrete	678-688
Xu, S. / Tabaković, A. / Liu, X. / Schlangen, E.	Calcium alginate capsules encapsulating rejuvenator as healing system for asphalt mastic	379-387
Zahra, Tatheer / Dhanasekar, Manicka	Characterisation and strategies for mitigation of the contact surface unevenness in dry-stack masonry	612-628
Siddiqua, Sumi / Barreto, Priscila N. M.	Chemical stabilization of rammed earth using calcium carbide residue and fly ash	364-371
Wang, Dezhi / Zhou, Xiangming / Fu, Bo / Zhang, Lirong	Chloride ion penetration resistance of concrete containing fly ash and silica fume against combined freezing-thawing and chloride attack	740-747
Li, Qiang / Wang, Zhibing / Li, Yuliang / Shang, Jianlin	Cold recycling of lime-fly ash stabilized macadam mixtures as pavement bases and subbases	306-314
Roman, Claudia / García-Morales, Moisés	Comparative assessment of the effect of micro- and nano- fillers on the microstructure and linear viscoelasticity of polyethylene-bitumen mastics	83-92
Kaur, Kamaldeep / Singh, Jaspal / Kaur, Manpreet	Compressive strength of rice husk ash based geopolymer: The effect of alkaline activator	188-192
Mandal, Tirupan / Yin, Hao / Ji, Richard	Correlating laboratory and full-scale reflective cracking tests for airfield pavements	47-58
Netinger Grubeša, Ivanka / Barišić, Ivana / Ducman, Vilma / Korat, Lidija	Draining capability of single-sized pervious concrete	252-260
Hayles, Meika / Sanchez, Leandro F. M. / Noël, Martin	Eco-efficient low cement recycled concrete aggregate mixtures for structural applications	724-732
Abdulkareem, Omar M. / Ben Fraj, Amor / Bouasker, Marwen / Khelidj, Abdelhafid	Effect of chemical and thermal activation on the microstructural and mechanical properties of more sustainable UHPC	567-577
Hashemi, Mohammad / Shafigh, Payam / Bin Karim, Mohamed Rehan / Atis, Cengiz Duran	The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement	553-566
Mi, Zhengxiang / Hu, Yu / Li, Qingbin / An, Zaizhan	Effect of curing humidity on the fracture properties of concrete	403-413
Oskouei, Asghar Vatani / Jafari, Armin / Bazli, Milad / Ghahri, Rasool	Effect of different retrofitting techniques on in-plane behavior of masonry wallettes	578-590
Son, H. M. / Park, S. M. / Jang, J. G. / Lee, H. K.	Effect of nano-silica on hydration and conversion of calcium aluminate cement	819-825
Peng, Chao / Chen, Pengxu / You, Zhanping / Lv, Songtao / Zhang, Ran / Xu, Fang / Zhang, Hao / Chen, Hanlin	Effect of silane coupling agent on improving the adhesive properties between asphalt binder and aggregates	591-600
de Azevedo, Nagilla Huerb / Gleize, Philippe J. P.	Effect of silicon carbide nanowhiskers on hydration and mechanical properties of a Portland cement paste	388-395
Miao, Yinghao / Wang, Sudi / Guo, Liyan / Zheng, Xiaoheng / Huang, Yucheng / Wang, Linbing	Effect of temperature on deformation properties of unbound granular materials containing fine RAP	443-451
Vaitkevičius, Vitoldas / Šerelis, Evaldas / Kerševičius, Vidas	Effect of ultra-sonic activation on early hydration process in 3D concrete printing technology	354-363
Kanchanason, V. / Plank, J.	Effectiveness of a calcium silicate hydrate – Polycarboxylate ether (C-S-H–PCE) nanocomposite on early strength development of fly ash cement	20-27
Garijo, Lucía / Zhang, Xiaoxin / Ruiz, Gonzalo / Ortega, José Joaquín / Wu, Zhimin	The effects of dosage and production process on the mechanical and physical properties of natural hydraulic lime mortars	325-334
Siddig, Elfadil A. A. / Feng, Cheng Pei / Ming, Li Yi	Effects of ethylene vinyl acetate and nanoclay additions on high-temperature performance of asphalt binders	276-282
Çomak, Bekir / Bideci, Alper / Sallı Bideci, Özlem	Effects of hemp fibers on characteristics of cement based mortar	794-799
Min, Hongguang / Zhang, Weiping / Gu, Xianglin	Effects of load damage on moisture transport and relative humidity response in concrete	59-68
Wang, Nan / Yu, Hongfa / Bi, Wanli / Tan, Yongshan / Zhang, Na / Wu, Chengyou / Ma, Haiyan / Hua, Shi	Effects of sodium citrate and citric acid on the properties of magnesium oxysulfate cement	697-704
Li, Hedong / Li, Bo / Jin, Ruoyu / Li, Shan / Yu, Jin-Guang	Effects of sustained loading and corrosion on the performance of reinforced concrete beams	179-187
Al-Rousan, Rajai Z.	Empirical and NLFEA prediction of bond-slip behavior between DSSF concrete and anchored CFRP composites	530-542
Evangelista, Patricia P. A. / Kiperstok, Asher / Torres, Ednildo A. / Gonçalves, Jardel P.	Environmental performance analysis of residential buildings in Brazil using life cycle assessment (LCA)	748-761
Tarawneh, Bashar / Sbitnev, Andrey / Hakam, Yasser	Estimation of pressuremeter modulus and limit pressure from Cone Penetration Test for desert sands	299-305
Bonifazi, Giuseppe / Palmieri, Roberta / Serranti, Silvia	Evaluation of attached mortar on recycled concrete aggregates by hyperspectral imaging	835-842
Vo, My Linh / Plank, Johann	Evaluation of natural rubber latex as film forming additive in cementitious mortar	93-99
Nguyen, Khoa Tan / Le, Tuan Anh / Lee, Kihak	Evaluation of the mechanical properties of sea sand-based geopolymer concrete and the corrosion of embedded steel bar	462-472
Ortiz Navas, F. / Navarro-Gregori, Juan / Leiva Herdocia, G. / Serna, P. / Cuenca, E.	An experimental study on the shear behaviour of reinforced concrete beams with macro-synthetic fibres	888-899
Mohammadhosseini, Hossein / Tahir, Mahmood Md. / Sam, Abdul Rahman Mohd	The feasibility of improving impact resistance and strength properties of sustainable concrete composites by adding waste metalized plastic fibres	223-236
Alnahhal, Wael / Aljidda, Omar	Flexural behavior of basalt fiber reinforced concrete beams with recycled concrete coarse aggregates	165-178
Liu, Sai / Zhu, Deju / Li, Gaosheng / Yao, Yiming / Ou, Yunfu / Shi, Caijun / Du, Yunxing	Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads	859-876
Rasheed, M. Abdur / Prakash, S. Suriya / Raju, Gangadharan / Kawasaki, Yuma	Fracture studies on synthetic fiber reinforced cellular concrete using acoustic emission technique	100-112
Shen, Haiying / Zhang, Shaodi / Cao, Jinzhen / Jiang, Jun / Wang, Wang	Improving anti-weathering performance of thermally modified wood by TiO 2 sol or/and paraffin emulsion	372-378
Çalışıcı, Mustafa / Gürü, Metin / Çubuk, M. Kürşat / Cansız, Ömer Faruk	Improving the aging resistance of bitumen by addition of polymer based diethylene glycol	283-288
Li, Ye / Tan, Kang Hai / Yang, En-Hua	Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature	629-637
Li, Lin / Wang, Ru / Lu, Qinyuan	Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar	911-922
Peng, Quanmin / Wang, Li / Lu, Qun	Influence of recycled coarse aggregate replacement percentage on fatigue performance of recycled aggregate concrete	347-353
Sharma, Devesh K. / Sharma, Rekha	Influence of rice husk ash and rice tiller ash along with chromate reducing agents on strength and hydration properties of Ordinary Portland Cement	843-850
Li, Guo / Yue, Jiang / Guo, Chenhao / Ji, Yongsheng	Influences of modified nanoparticles on hydrophobicity of concrete with organic film coating	1-7
Tong, Zheng / Gao, Jie / Zhang, Haitao	Innovative method for recognizing subgrade defects based on a convolutional neural network	69-82
Ding, Qingjun / Yang, Jun / Hou, Dongshuai / Zhang, Gaozhan	Insight on the mechanism of sulfate attacking on the cement paste with granulated blast furnace slag: An experimental and molecular dynamics study	601-611
Negi, P. / Chakraborty, T. / Kaur, Naveet / Bhalla, Suresh	Investigations on effectiveness of embedded PZT patches at varying orientations for monitoring concrete hydration using EMI technique	489-498
Cong, Lin / Wang, Tongjing / Tan, Le / Yuan, Junjie / Shi, Jiachen	Laboratory evaluation on performance of porous polyurethane mixtures and OGFC	436-442
Li, Jun / Cui, Xin-zhuang / Jin, Qing / Su, Jun-wei / Cui, She-qiang / Wang, Yi-Lin	Laboratory investigation of the durability of a new smart geosynthetic material	28-33
Al-Mosawe, Hasan / Thom, Nick / Airey, Gordon / Albayati, Amjad	Linear viscous approach to predict rut depth in asphalt mixtures	775-793
Wang, Ziguo / Sun, Yuyan / Wu, Hao / Zhang, Chunwei	Low velocity impact resistance of bio-inspired building ceramic composites with nacre-like structure	851-858
Khodabakhshian, Ali / de Brito, Jorge / Ghalehnovi, Mansour / Asadi Shamsabadi, Elyas	Mechanical, environmental and economic performance of structural concrete containing silica fume and marble industry waste powder	237-251
Thai, Duc-Kien / Kim, Seung-Eock / Bui, Tinh Quoc	Modified empirical formulas for predicting the thickness of RC panels under impact loading	261-275
Perlin, Lourenço Panosso / do Valle, Ângela / Pinto, Roberto Caldas de Andrade	New method to locate the pith position in a wood cross-section based on ultrasonic measurements	733-739
Aicher, Simon / Tapia, Cristóbal	Novel internally LVL-reinforced glued laminated timber beams with large holes	662-677
Somé, Saannibe Ciryle / Feeser, Arnaud / Pavoine, Alexandre	Numerical and experimental investigation of mode I cracking of asphalt concrete using semi-circular bending test	34-46
Majidi, Behzad / Rolfe, Philip / Fafard, Mario / Ziegler, Donald P. / Alamdari, Houshang	Numerical modeling of compaction and flow of coke/pitch mixtures using discrete element method	315-324
Song, Qiulei / Yu, Rui / Shui, Zhonghe / Wang, Xinpeng / Rao, Suduan / Lin, Zewen	Optimization of fibre orientation and distribution for a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): Experiments and mechanism analysis	8-19
Gama, Dennyele A. / Yan, Yu / Rodrigues, John Kennedy G. / Roque, Reynaldo	Optimizing the use of reactive terpolymer, polyphosphoric acid and high-density polyethylene to achieve asphalt binders with superior performance	522-529
Hiremath, Parameshwar N. / Yaragal, Subhash C.	Performance evaluation of reactive powder concrete with polypropylene fibers at elevated temperatures	499-512
Mashaly, Ahmed O. / Shalaby, Basel N. / Rashwan, Mohammed A.	Performance of mortar and concrete incorporating granite sludge as cement replacement	800-818
Jerônimo, Valdith Lopes / Meira, Gibson Rocha / da Silva Filho, Luiz Carlos Pinto	Performance of self-compacting concretes with wastes from heavy ceramic industry against corrosion by chlorides	900-910
Zehtabchi, Ali / Hashemi, Seyed Amir Hossein / Asadi, Somayeh	Predicting the strength of polymer-modified thin-layer asphalt with fuzzy logic	826-834
Zhang, Dong / Chen, Meizhu / Wu, Shaopeng / Liu, Quantao / Wan, Jiuming	Preparation of expanded graphite/polyethylene glycol composite phase change material for thermoregulation of asphalt binder	513-521
Gomes, S. / Dias-Da-Costa, D. / Neves, L. A. C. / Hadigheh, S. A. / Fernandes, P. / Júlio, E.	Probabilistic-based characterisation of the mechanical properties of CFRP laminates	132-141
Lameiras, Rodrigo / Barros, Joaquim A. O. / Valente, Isabel B. / Xavier, José / Azenha, Miguel	Pull-out behaviour of glass-fibre reinforced polymer perforated plate connectors embedded in concrete. Part II: Prediction of load carrying capacity	142-164
Martínez Fernández, Pablo / Hidalgo Signes, Carlos / Villalba Sanchís, Ignacio / Pérez Mira, Domingo / Insa Franco, Ricardo	Real scale evaluation of vibration mitigation of sub-ballast layers with added tyre-derived aggregate	335-346
Zeng, Yihua / Botte, Wouter / Caspeele, Robby	Reliability analysis of FRP strengthened RC beams considering compressive membrane action	473-488
Mukhtar, Faisal M. / Faysal, Rayhan M.	A review of test methods for studying the FRP-concrete interfacial bond behavior	877-887
Zhang, Peng / Dai, Yuqing / Ding, Xiaoya / Zhou, Chunsheng / Xue, Xiao / Zhao, Tiejun	Self-healing behaviour of multiple microcracks of strain hardening cementitious composites (SHCC)	705-715
Walubita, Lubinda F. / Nyamuhokya, Tito P. / Naik, Bhaven / Holleran, Irina / Dessouky, Samer	Sensitivity analysis and validation of the Simple Punching Shear Test (SPST) for screening HMA mixes	205-214
Siddique, Salman / Shrivastava, Sandeep / Chaudhary, Sandeep / Gupta, Trilok	Strength and impact resistance properties of concrete containing fine bone china ceramic aggregate	289-298
Song, Haemin / Jeong, Yeonung / Bae, Sungchul / Jun, Yubin / Yoon, Seyoon / Oh, Jae Eun	A study of thermal decomposition of phases in cementitious systems using HT-XRD and TG	648-661
Qian, Shanshan / Yao, Yan / Wang, Ziming / Cui, Suping / Liu, Xiao / Jiang, Haidong / Guo, Zhaolai / Lai, Guanghong / Xu, Qian / Guan, Jianan	Synthesis, characterization and working mechanism of a novel polycarboxylate superplasticizer for concrete possessing reduced viscosity	452-461
Zhang, Meng / Qian, Zhendong / Zhou, Yadong / Liu, Yang	Test and evaluation for effects of aggregates fragmentation on performance of lightweight asphalt concrete	215-222
Ma, Gao / Li, Hui / Yan, Libo / Huang, Liang	Testing and analysis of basalt FRP-confined damaged concrete cylinders under axial compression loading	762-774
Madrid, Maggi / Orbe, Aimar / Carré, Hélène / García, Yokasta	Thermal performance of sawdust and lime-mud concrete masonry units	113-123
Lin, Peng / Huang, Weidong / Tang, Naipeng / Xiao, Feipeng / Li, Yi	Understanding the low temperature properties of Terminal Blend hybrid asphalt through chemical and thermal analysis methods	543-552
Jadhav, Umesh U. / Lahoti, Mukund / Chen, Zhitao / Qiu, Jishen / Cao, Bin / Yang, En-Hua	Viability of bacterial spores and crack healing in bacteria-containing geopolymer	716-723

Informations
sur cette fiche
IssueID
35495
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - avril 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - avril 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.