Construction and Building Materials - May 2018

Published:	May 2018

Articles in this Issue

Author(s)	Title	Page(s)
Perrot, A. / Rangeard, D. / Courteille, E.	3D printing of earth-based materials: Processing aspects	670-676
Ratanawilai, Thanate / Taneerat, Kampanart	Alternative polymeric matrices for wood-plastic composites: Effects on mechanical properties and resistance to natural weathering	349-357
Gao, Yun / Feng, Pan / Jiang, Jinyang	Analytical and numerical modeling of elastic moduli for cement based composites with solid mass fractal model	330-339
Hadi, Muhammad N. S. / Algburi, Atheer H. M. / Sheikh, M. Neaz / Carrigan, Allister T.	Axial and flexural behaviour of circular reinforced concrete columns strengthened with reactive powder concrete jacket and fibre reinforced polymer wrapping	717-727
Xiao, Huawen / Yao, Kai / Liu, Yong / Goh, Siang-Huat / Lee, Fook-Hou	Bender element measurement of small strain shear modulus of cement-treated marine clay – Effect of test setup and methodology	433-447
Calderon-Uriszar-Aldaca, I. / Briz, E. / Larrinaga, P. / García, H.	Bonding strength of stainless steel rebars in concretes exposed to marine environments	125-133
Wei, Yu-Ling / Kuo, Po-Jan / Yin, Yan-Zhi / Huang, Yao-Ting / Chung, Tai-Heng / Xie, Xiang-Qi	Co-sintering oyster shell with hazardous steel fly ash and harbor sediment into construction materials	224-232
Mohammed, Ali A. / Manalo, Allan C. / Maranan, Ginghis B. / Zhuge, Yan / Vijay, P. V.	Comparative study on the behaviour of different infill materials for pre-fabricated fibre composite repair systems	770-780
Shafieifar, Mohamadreza / Farzad, Mahsa / Azizinamini, Atorod	A comparison of existing analytical methods to predict the flexural capacity of Ultra High Performance Concrete (UHPC) beams	10-18
Buczyński, Przemysław / Iwański, Marek	Complex modulus change within the linear viscoelastic region of the mineral-cement mixture with foamed bitumen	52-62
Rodrigues, Fernanda / Matos, Raquel / Di Prizio, Moisés / Costa, Aníbal	Conservation level of residential buildings: Methodology evolution	781-786
Farhan, Ahmed Hilal / Dawson, Andrew Robert / Thom, Nicholas Howard	Damage propagation rate and mechanical properties of recycled steel fiber-reinforced and cement-bound granular materials used in pavement structure	112-124
Liu, Hongying / Li, Yan / Zhang, Qiang / Hao, Peiwen	Deformation characteristic and mechanism of blisters in cement concrete bridge deck pavement	358-369
Bhattacharjee, Sujal / Bajwa, Dilpreet S.	Degradation in the mechanical and thermo-mechanical properties of natural fiber filled polymer composites due to recycling	1-9
Allahverdi, Ali / Azimi, Seyed Amin / Alibabaie, Mehdi	Development of multi-strength grade green lightweight reactive powder concrete using expanded polystyrene beads	457-467
Wan, Baolin / Jiang, Cheng / Wu, Yu-Fei	Effect of defects in externally bonded FRP reinforced concrete	63-76
Kang, Sung-Hoon / Hong, Sung-Gul / Moon, Juhyuk	The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete	29-40
Sanjayan, Jay G. / Nematollahi, Behzad / Xia, Ming / Marchment, Taylor	Effect of surface moisture on inter-layer strength of 3D printed concrete	468-475
Luo, Zhe / Karki, Aashis / Pan, Ernian / Abbas, Ala R. / Arefin, Mir Shahnewaz / Hu, Biao	Effect of uncertain material property on system reliability in mechanistic-empirical pavement design	488-498
Demir, İlhami / Sevim, Özer / Tekin, Emrah	The effects of shrinkage-reducing admixtures used in self-compacting concrete on its strength and durability	153-165
Motahari Karein, S. Mahmoud / Joshaghani, Alireza / Ramezanianpour, A. A. / Isapour, Soroush / Karakouzian, Moses	Effects of the mechanical milling method on transport properties of self-compacting concrete containing perlite powder as a supplementary cementitious material	677-684
Zhihong, Nie / Zhengyu, Liang / Xiang, Wang / Jian, Gong	Evaluation of granular particle roundness using digital image processing and computational geometry	319-329
Kareem, Abbaas I. / Nikraz, Hamid / Asadi, Hossein	Evaluation of the double coated recycled concrete aggregates for hot mix asphalt	544-552
Herrera, René / Arrese, Ainhoa / de Hoyos-Martinez, Pedro L. / Labidi, Jalel / Llano-Ponte, Rodrigo	Evolution of thermally modified wood properties exposed to natural and artificial weathering and its potential as an element for façades systems	233-242
Wang, Yue / An, Mingzhe / Yu, Ziruo / Han, Bing / Ji, Wenyu	Experimental and cellular-automata-based analysis of chloride ion diffusion in reactive powder concrete subjected to freeze–thaw cycling	760-769
Duo, Li / Kan-liang, Tian / Hui-li, Zhang / Yu-yao, Wu / Kang-yi, Nie / Shi-can, Zhang	Experimental investigation of solidifying desert aeolian sand using microbially induced calcite precipitation	251-262
Zhang, Xiuli / Deng, Zongcai	Experimental study and theoretical analysis on axial compressive behavior of concrete columns reinforced with GFRP bars and PVA fibers	519-532
Morsy, M. S. / Shoukry, H. / Mokhtar, M. M. / Ali, Atif M. / El-Khodary, S. A.	Facile production of nano-scale metakaolin: An investigation into its effect on compressive strength, pore structure and microstructural characteristics of mortar	243-250
Hawileh, R. A. / Nawaz, W. / Abdalla, J. A.	Flexural behavior of reinforced concrete beams externally strengthened with Hardwire Steel-Fiber sheets	562-573
Zhang, Xuhui / Luo, Yuming / Wang, Lei / Zhang, Jianren / Wu, Wenpeng / Yang, Caiqian	Flexural strengthening of damaged RC T-beams using self-compacting concrete jacketing under different sustaining load	185-195
Wang, Chaohui / Chen, Qian / Fu, Hao / Chen, Jiao	Heat conduction effect of steel bridge deck with conductive gussasphalt concrete pavement	422-432
Malaiškienė, Jurgita / Kizinievič, Olga / Kizinievič, Viktor / Boris, Renata	The impact of primary sludge from paper industry on the properties of hardened cement paste and mortar	553-561
El-Sayed, Taha A. / Erfan, Abeer M.	Improving shear strength of beams using ferrocement composite	608-617
Wang, Yunyao / Shui, Zhonghe / Huang, Yun / Sun, Tao / Yu, Rui / Wang, Guiming	Improving the pozzolanic activity of metakaolin by urea intercalation technique	19-28
Hefni, Yasmin / Zaher, Yehia Abd El / Abdel Wahab, Mona	Influence of activation of fly ash on the mechanical properties of concrete	728-734
Koohestani, Babak / Khodadadi Darban, Ahmad / Yilmaz, Erol / Mokhtari, Pozhhan / Ganetri, Ikram	Influence of amine and vinyl functional groups of silanes on total performance of thermoplastic-based composites	98-105
El Boudour El Idrissi, Hicham / Daoudi, Lahcen / El Ouahabi, Meriam / Collin, Frédéric / Fagel, Nathalie	The influence of clay composition and lithology on the industrial potential of earthenware	650-659
Thomas, C. / Setién, J. / Polanco, J. A. / Cimentada, A. I. / Medina, C.	Influence of curing conditions on recycled aggregate concrete	618-625
Shen, Weiguo / Liu, Yi / Wang, Zhongwen / Cao, Lianghong / Wu, Dinglue / Wang, Yujie / Ji, Xiaoli	Influence of manufactured sand’s characteristics on its concrete performance	574-583
Vavričuk, Anja / Bokan-Bosiljkov, Violeta / Kramar, Sabina	The influence of metakaolin on the properties of natural hydraulic lime-based grouts for historic masonry repair	706-716
Lushnikova, A. / Zaoui, A.	Influence of single-walled carbon nantotubes structure and density on the ductility of cement paste	86-97
Farooq, Mohammed / Banthia, Nemkumar	An innovative FRP fibre for concrete reinforcement: Production of fibre, micromechanics, and durability	406-421
Lu, Xubin / Lim, Yee Yan / Soh, Chee Kiong	Investigating the performance of "Smart Probe" based indirect EMI technique for strength development monitoring of cementitious materials – Modelling and parametric study	134-152
Li, Yuanyuan / Wu, Shaopeng / Dai, Ying / Pang, Ling / Liu, Quantao / Xie, Jun / Kong, Dezhi	Investigation of sodium stearate organically modified LDHs effect on the anti aging properties of asphalt binder	509-518
Li, Yuanyuan / Wu, Shaopeng / Pang, Ling / Liu, Quantao / Wang, Zengfeng / Zhang, Aoming	Investigation of the effect of Mg-Al-LDH on pavement performance and aging resistance of styrene-butadiene-styrene modified asphalt	584-596
Deng, Mingke / Ma, Fudong / Ye, Wang / Liang, Xingwen	Investigation of the shear strength of HDC deep beams based on a modified direct strut-and-tie model	340-348
Cai, Liangcai / Shi, Xingang / Xue, Jing	Laboratory evaluation of composed modified asphalt binder and mixture containing nano-silica/rock asphalt/SBS	204-211
Shanbara, Hayder Kamil / Ruddock, Felicite / Atherton, William	A laboratory study of high-performance cold mix asphalt mixtures reinforced with natural and synthetic fibres	166-175
Wu, Hao-Liang / Jin, Fei / Bo, Yu-Lin / Du, Yan-Jun / Zheng, Jun-Xing	Leaching and microstructural properties of lead contaminated kaolin stabilized by GGBS-MgO in semi-dynamic leaching tests	626-634
Giunta, Marinella / Bressi, Sara / D'Angelo, Giacomo	Life cycle cost assessment of bitumen stabilised ballast: A novel maintenance strategy for railway track-bed	751-759
Al Menhosh, Adel / Wang, Yu / Wang, Yan / Augusthus-Nelson, Levingshan	Long term durability properties of concrete modified with metakaolin and polymer admixture	41-51
Alsaif, Abdulaziz / Koutas, Lampros / Bernal, Susan A. / Guadagnini, Maurizio / Pilakoutas, Kypros	Mechanical performance of steel fibre reinforced rubberised concrete for flexible concrete pavements	533-543
Song, Wei-Jie / Qiao, Wei-Guo / Yang, Xu-Xu / Lin, Deng-Ge / Li, Yan-Zhi	Mechanical properties and constitutive equations of crumb rubber mortars	660-669
Zhang, Runxiao / Panesar, Daman K.	Mechanical properties and rapid chloride permeability of carbonated concrete containing reactive MgO	77-85
Wei, Li / Chai, Shou Xi / Zhang, Hu Yuan / Shi, Qian	Mechanical properties of soil reinforced with both lime and four kinds of fiber	300-308
Witkowski, Hubert / Koniorczyk, Marcin	New sampling method to improve the reliability of FTIR analysis for Self-Compacting Concrete	196-203
Kim, Heonyoung / Kang, Donghoon / Oh, Seung Jae / Joo, Chulmin	Nondestructive evaluation on dispersion of steel fibers in UHPC using THz electromagnetic waves	293-299
Yang, Jia-qi / Smith, Scott T. / Wang, Zhenyu / Lim, Yee Yan	Numerical simulation of FRP-strengthened RC slabs anchored with FRP anchors	735-750
Ma, Qianmin / Du, Haiyun / Zhou, Xintao / He, Kecheng / Lin, Zhiwei / Yan, Feng / Huang, Liping / Guo, Rongxin	Performance of copper slag contained mortars after exposure to elevated temperatures	378-386
Guo, Zheng / Zhu, Qi / Liu, Chuntao / Xing, Zipeng	Preparation of Ca-Al-Fe deicing salt and modified with sodium methyl silicate for reducing the influence of concrete structure	263-271
Wu, Chengyou / Chen, Cong / Zhang, Huifang / Tan, Yongshan / Yu, Hongfa	Preparation of magnesium oxysulfate cement using magnesium-rich byproducts from the production of lithium carbonate from salt lakes	597-607
Lynch, José Luis Villalba / Baykara, Haci / Cornejo, Mauricio / Soriano, Guillermo / Ulloa, Néstor A.	Preparation, characterization, and determination of mechanical and thermal stability of natural zeolite-based foamed geopolymers	448-456
Azreen, N. M. / Rashid, Raizal S. M. / Haniza, M. / Voo, Y. L. / Mugahed Amran, Y. H.	Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass	370-377
Panedpojaman, Pattamad / Tonnayopas, Danupon	Rebound hammer test to estimate compressive strength of heat exposed concrete	387-395
Yin, Fan / Garita, Josue / Taylor, Adam / West, Randy	Refining the indirect tensile (IDT) N flex Factor test to evaluate cracking resistance of asphalt mixtures for mix design and quality assurance	396-405
Clausi, Marina / Fernández-Jiménez, Ana M. / Palomo, Angel / Tarantino, Serena C. / Zema, Michele	Reuse of waste sandstone sludge via alkali activation in matrices of fly ash and metakaolin	212-223
Tam, Vivian W. Y. / Soomro, Mahfooz / Evangelista, Ana Catarina Jorge	A review of recycled aggregate in concrete applications (2000–2017)	272-292
Park, Sangjun / Lee, Euibae / Ko, Jeongwon / Yoo, Jaekang / Kim, Yongjic	Rheological properties of concrete using dune sand	685-695
Moretti, Juliana Petermann / Nunes, Sandra / Sales, Almir	Self-compacting concrete incorporating sugarcane bagasse ash	635-649
Lu, Youyuan / Shi, Guiyun / Liu, Yuqing / Ding, Zhu / Pan, Jinlong / Qin, Daoding / Dong, Biqin / Shao, Hongyu	Study on the effect of chloride ion on the early age hydration process of concrete by a non-contact monitoring method	499-508
Di Mundo, Rosa / Petrella, Andrea / Notarnicola, Michele	Surface and bulk hydrophobic cement composites by tyre rubber addition	176-184
Gomes, M. Glória / Flores-Colen, I. / da Silva, F. / Pedroso, M.	Thermal conductivity measurement of thermal insulating mortars with EPS and silica aerogel by steady-state and transient methods	696-705
Ge, Zhuang / Yao, Xiao / Wang, Xiaojing / Zhang, Wei / Yang, Tao	Thermal performance and microstructure of oil well cement paste containing subsphaeroidal konilite flour in HTHP conditions	787-794
Lo Presti, D. / Izquierdo, M. A. / Jiménez del Barco Carrión, A.	Towards storage-stable high-content recycled tyre rubber modified bitumen	106-111
Ingrassia, Lorenzo Paolo / Lu, Xiaohu / Canestrari, Francesco / Ferrotti, Gilda	Tribological characterization of bituminous binders with Warm Mix Asphalt additives	309-318
Fang, Guohao / Ho, Wing Kei / Tu, Wenlin / Zhang, Mingzhong	Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature	476-487

About this
data sheet
IssueID
35494
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - May 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - May 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.