Construction and Building Materials - Mai 2018

Erschienen:	Mai 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Perrot, A. / Rangeard, D. / Courteille, E.	3D printing of earth-based materials: Processing aspects	670-676
Ratanawilai, Thanate / Taneerat, Kampanart	Alternative polymeric matrices for wood-plastic composites: Effects on mechanical properties and resistance to natural weathering	349-357
Gao, Yun / Feng, Pan / Jiang, Jinyang	Analytical and numerical modeling of elastic moduli for cement based composites with solid mass fractal model	330-339
Hadi, Muhammad N. S. / Algburi, Atheer H. M. / Sheikh, M. Neaz / Carrigan, Allister T.	Axial and flexural behaviour of circular reinforced concrete columns strengthened with reactive powder concrete jacket and fibre reinforced polymer wrapping	717-727
Xiao, Huawen / Yao, Kai / Liu, Yong / Goh, Siang-Huat / Lee, Fook-Hou	Bender element measurement of small strain shear modulus of cement-treated marine clay – Effect of test setup and methodology	433-447
Calderon-Uriszar-Aldaca, I. / Briz, E. / Larrinaga, P. / García, H.	Bonding strength of stainless steel rebars in concretes exposed to marine environments	125-133
Wei, Yu-Ling / Kuo, Po-Jan / Yin, Yan-Zhi / Huang, Yao-Ting / Chung, Tai-Heng / Xie, Xiang-Qi	Co-sintering oyster shell with hazardous steel fly ash and harbor sediment into construction materials	224-232
Mohammed, Ali A. / Manalo, Allan C. / Maranan, Ginghis B. / Zhuge, Yan / Vijay, P. V.	Comparative study on the behaviour of different infill materials for pre-fabricated fibre composite repair systems	770-780
Shafieifar, Mohamadreza / Farzad, Mahsa / Azizinamini, Atorod	A comparison of existing analytical methods to predict the flexural capacity of Ultra High Performance Concrete (UHPC) beams	10-18
Buczyński, Przemysław / Iwański, Marek	Complex modulus change within the linear viscoelastic region of the mineral-cement mixture with foamed bitumen	52-62
Rodrigues, Fernanda / Matos, Raquel / Di Prizio, Moisés / Costa, Aníbal	Conservation level of residential buildings: Methodology evolution	781-786
Farhan, Ahmed Hilal / Dawson, Andrew Robert / Thom, Nicholas Howard	Damage propagation rate and mechanical properties of recycled steel fiber-reinforced and cement-bound granular materials used in pavement structure	112-124
Liu, Hongying / Li, Yan / Zhang, Qiang / Hao, Peiwen	Deformation characteristic and mechanism of blisters in cement concrete bridge deck pavement	358-369
Bhattacharjee, Sujal / Bajwa, Dilpreet S.	Degradation in the mechanical and thermo-mechanical properties of natural fiber filled polymer composites due to recycling	1-9
Allahverdi, Ali / Azimi, Seyed Amin / Alibabaie, Mehdi	Development of multi-strength grade green lightweight reactive powder concrete using expanded polystyrene beads	457-467
Wan, Baolin / Jiang, Cheng / Wu, Yu-Fei	Effect of defects in externally bonded FRP reinforced concrete	63-76
Kang, Sung-Hoon / Hong, Sung-Gul / Moon, Juhyuk	The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete	29-40
Sanjayan, Jay G. / Nematollahi, Behzad / Xia, Ming / Marchment, Taylor	Effect of surface moisture on inter-layer strength of 3D printed concrete	468-475
Luo, Zhe / Karki, Aashis / Pan, Ernian / Abbas, Ala R. / Arefin, Mir Shahnewaz / Hu, Biao	Effect of uncertain material property on system reliability in mechanistic-empirical pavement design	488-498
Demir, İlhami / Sevim, Özer / Tekin, Emrah	The effects of shrinkage-reducing admixtures used in self-compacting concrete on its strength and durability	153-165
Motahari Karein, S. Mahmoud / Joshaghani, Alireza / Ramezanianpour, A. A. / Isapour, Soroush / Karakouzian, Moses	Effects of the mechanical milling method on transport properties of self-compacting concrete containing perlite powder as a supplementary cementitious material	677-684
Zhihong, Nie / Zhengyu, Liang / Xiang, Wang / Jian, Gong	Evaluation of granular particle roundness using digital image processing and computational geometry	319-329
Kareem, Abbaas I. / Nikraz, Hamid / Asadi, Hossein	Evaluation of the double coated recycled concrete aggregates for hot mix asphalt	544-552
Herrera, René / Arrese, Ainhoa / de Hoyos-Martinez, Pedro L. / Labidi, Jalel / Llano-Ponte, Rodrigo	Evolution of thermally modified wood properties exposed to natural and artificial weathering and its potential as an element for façades systems	233-242
Wang, Yue / An, Mingzhe / Yu, Ziruo / Han, Bing / Ji, Wenyu	Experimental and cellular-automata-based analysis of chloride ion diffusion in reactive powder concrete subjected to freeze–thaw cycling	760-769
Duo, Li / Kan-liang, Tian / Hui-li, Zhang / Yu-yao, Wu / Kang-yi, Nie / Shi-can, Zhang	Experimental investigation of solidifying desert aeolian sand using microbially induced calcite precipitation	251-262
Zhang, Xiuli / Deng, Zongcai	Experimental study and theoretical analysis on axial compressive behavior of concrete columns reinforced with GFRP bars and PVA fibers	519-532
Morsy, M. S. / Shoukry, H. / Mokhtar, M. M. / Ali, Atif M. / El-Khodary, S. A.	Facile production of nano-scale metakaolin: An investigation into its effect on compressive strength, pore structure and microstructural characteristics of mortar	243-250
Hawileh, R. A. / Nawaz, W. / Abdalla, J. A.	Flexural behavior of reinforced concrete beams externally strengthened with Hardwire Steel-Fiber sheets	562-573
Zhang, Xuhui / Luo, Yuming / Wang, Lei / Zhang, Jianren / Wu, Wenpeng / Yang, Caiqian	Flexural strengthening of damaged RC T-beams using self-compacting concrete jacketing under different sustaining load	185-195
Wang, Chaohui / Chen, Qian / Fu, Hao / Chen, Jiao	Heat conduction effect of steel bridge deck with conductive gussasphalt concrete pavement	422-432
Malaiškienė, Jurgita / Kizinievič, Olga / Kizinievič, Viktor / Boris, Renata	The impact of primary sludge from paper industry on the properties of hardened cement paste and mortar	553-561
El-Sayed, Taha A. / Erfan, Abeer M.	Improving shear strength of beams using ferrocement composite	608-617
Wang, Yunyao / Shui, Zhonghe / Huang, Yun / Sun, Tao / Yu, Rui / Wang, Guiming	Improving the pozzolanic activity of metakaolin by urea intercalation technique	19-28
Hefni, Yasmin / Zaher, Yehia Abd El / Abdel Wahab, Mona	Influence of activation of fly ash on the mechanical properties of concrete	728-734
Koohestani, Babak / Khodadadi Darban, Ahmad / Yilmaz, Erol / Mokhtari, Pozhhan / Ganetri, Ikram	Influence of amine and vinyl functional groups of silanes on total performance of thermoplastic-based composites	98-105
El Boudour El Idrissi, Hicham / Daoudi, Lahcen / El Ouahabi, Meriam / Collin, Frédéric / Fagel, Nathalie	The influence of clay composition and lithology on the industrial potential of earthenware	650-659
Thomas, C. / Setién, J. / Polanco, J. A. / Cimentada, A. I. / Medina, C.	Influence of curing conditions on recycled aggregate concrete	618-625
Shen, Weiguo / Liu, Yi / Wang, Zhongwen / Cao, Lianghong / Wu, Dinglue / Wang, Yujie / Ji, Xiaoli	Influence of manufactured sand’s characteristics on its concrete performance	574-583
Vavričuk, Anja / Bokan-Bosiljkov, Violeta / Kramar, Sabina	The influence of metakaolin on the properties of natural hydraulic lime-based grouts for historic masonry repair	706-716
Lushnikova, A. / Zaoui, A.	Influence of single-walled carbon nantotubes structure and density on the ductility of cement paste	86-97
Farooq, Mohammed / Banthia, Nemkumar	An innovative FRP fibre for concrete reinforcement: Production of fibre, micromechanics, and durability	406-421
Lu, Xubin / Lim, Yee Yan / Soh, Chee Kiong	Investigating the performance of "Smart Probe" based indirect EMI technique for strength development monitoring of cementitious materials – Modelling and parametric study	134-152
Li, Yuanyuan / Wu, Shaopeng / Dai, Ying / Pang, Ling / Liu, Quantao / Xie, Jun / Kong, Dezhi	Investigation of sodium stearate organically modified LDHs effect on the anti aging properties of asphalt binder	509-518
Li, Yuanyuan / Wu, Shaopeng / Pang, Ling / Liu, Quantao / Wang, Zengfeng / Zhang, Aoming	Investigation of the effect of Mg-Al-LDH on pavement performance and aging resistance of styrene-butadiene-styrene modified asphalt	584-596
Deng, Mingke / Ma, Fudong / Ye, Wang / Liang, Xingwen	Investigation of the shear strength of HDC deep beams based on a modified direct strut-and-tie model	340-348
Cai, Liangcai / Shi, Xingang / Xue, Jing	Laboratory evaluation of composed modified asphalt binder and mixture containing nano-silica/rock asphalt/SBS	204-211
Shanbara, Hayder Kamil / Ruddock, Felicite / Atherton, William	A laboratory study of high-performance cold mix asphalt mixtures reinforced with natural and synthetic fibres	166-175
Wu, Hao-Liang / Jin, Fei / Bo, Yu-Lin / Du, Yan-Jun / Zheng, Jun-Xing	Leaching and microstructural properties of lead contaminated kaolin stabilized by GGBS-MgO in semi-dynamic leaching tests	626-634
Giunta, Marinella / Bressi, Sara / D'Angelo, Giacomo	Life cycle cost assessment of bitumen stabilised ballast: A novel maintenance strategy for railway track-bed	751-759
Al Menhosh, Adel / Wang, Yu / Wang, Yan / Augusthus-Nelson, Levingshan	Long term durability properties of concrete modified with metakaolin and polymer admixture	41-51
Alsaif, Abdulaziz / Koutas, Lampros / Bernal, Susan A. / Guadagnini, Maurizio / Pilakoutas, Kypros	Mechanical performance of steel fibre reinforced rubberised concrete for flexible concrete pavements	533-543
Song, Wei-Jie / Qiao, Wei-Guo / Yang, Xu-Xu / Lin, Deng-Ge / Li, Yan-Zhi	Mechanical properties and constitutive equations of crumb rubber mortars	660-669
Zhang, Runxiao / Panesar, Daman K.	Mechanical properties and rapid chloride permeability of carbonated concrete containing reactive MgO	77-85
Wei, Li / Chai, Shou Xi / Zhang, Hu Yuan / Shi, Qian	Mechanical properties of soil reinforced with both lime and four kinds of fiber	300-308
Witkowski, Hubert / Koniorczyk, Marcin	New sampling method to improve the reliability of FTIR analysis for Self-Compacting Concrete	196-203
Kim, Heonyoung / Kang, Donghoon / Oh, Seung Jae / Joo, Chulmin	Nondestructive evaluation on dispersion of steel fibers in UHPC using THz electromagnetic waves	293-299
Yang, Jia-qi / Smith, Scott T. / Wang, Zhenyu / Lim, Yee Yan	Numerical simulation of FRP-strengthened RC slabs anchored with FRP anchors	735-750
Ma, Qianmin / Du, Haiyun / Zhou, Xintao / He, Kecheng / Lin, Zhiwei / Yan, Feng / Huang, Liping / Guo, Rongxin	Performance of copper slag contained mortars after exposure to elevated temperatures	378-386
Guo, Zheng / Zhu, Qi / Liu, Chuntao / Xing, Zipeng	Preparation of Ca-Al-Fe deicing salt and modified with sodium methyl silicate for reducing the influence of concrete structure	263-271
Wu, Chengyou / Chen, Cong / Zhang, Huifang / Tan, Yongshan / Yu, Hongfa	Preparation of magnesium oxysulfate cement using magnesium-rich byproducts from the production of lithium carbonate from salt lakes	597-607
Lynch, José Luis Villalba / Baykara, Haci / Cornejo, Mauricio / Soriano, Guillermo / Ulloa, Néstor A.	Preparation, characterization, and determination of mechanical and thermal stability of natural zeolite-based foamed geopolymers	448-456
Azreen, N. M. / Rashid, Raizal S. M. / Haniza, M. / Voo, Y. L. / Mugahed Amran, Y. H.	Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass	370-377
Panedpojaman, Pattamad / Tonnayopas, Danupon	Rebound hammer test to estimate compressive strength of heat exposed concrete	387-395
Yin, Fan / Garita, Josue / Taylor, Adam / West, Randy	Refining the indirect tensile (IDT) N flex Factor test to evaluate cracking resistance of asphalt mixtures for mix design and quality assurance	396-405
Clausi, Marina / Fernández-Jiménez, Ana M. / Palomo, Angel / Tarantino, Serena C. / Zema, Michele	Reuse of waste sandstone sludge via alkali activation in matrices of fly ash and metakaolin	212-223
Tam, Vivian W. Y. / Soomro, Mahfooz / Evangelista, Ana Catarina Jorge	A review of recycled aggregate in concrete applications (2000–2017)	272-292
Park, Sangjun / Lee, Euibae / Ko, Jeongwon / Yoo, Jaekang / Kim, Yongjic	Rheological properties of concrete using dune sand	685-695
Moretti, Juliana Petermann / Nunes, Sandra / Sales, Almir	Self-compacting concrete incorporating sugarcane bagasse ash	635-649
Lu, Youyuan / Shi, Guiyun / Liu, Yuqing / Ding, Zhu / Pan, Jinlong / Qin, Daoding / Dong, Biqin / Shao, Hongyu	Study on the effect of chloride ion on the early age hydration process of concrete by a non-contact monitoring method	499-508
Di Mundo, Rosa / Petrella, Andrea / Notarnicola, Michele	Surface and bulk hydrophobic cement composites by tyre rubber addition	176-184
Gomes, M. Glória / Flores-Colen, I. / da Silva, F. / Pedroso, M.	Thermal conductivity measurement of thermal insulating mortars with EPS and silica aerogel by steady-state and transient methods	696-705
Ge, Zhuang / Yao, Xiao / Wang, Xiaojing / Zhang, Wei / Yang, Tao	Thermal performance and microstructure of oil well cement paste containing subsphaeroidal konilite flour in HTHP conditions	787-794
Lo Presti, D. / Izquierdo, M. A. / Jiménez del Barco Carrión, A.	Towards storage-stable high-content recycled tyre rubber modified bitumen	106-111
Ingrassia, Lorenzo Paolo / Lu, Xiaohu / Canestrari, Francesco / Ferrotti, Gilda	Tribological characterization of bituminous binders with Warm Mix Asphalt additives	309-318
Fang, Guohao / Ho, Wing Kei / Tu, Wenlin / Zhang, Mingzhong	Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature	476-487

Über diese
Datenseite
IssueID
35494
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Mai 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Mai 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.