Construction and Building Materials - May 2018

Published:	May 2018

Articles in this Issue

Author(s)	Title	Page(s)
Li, Zaoyuan / Deng, Zhizhong / Guo, Xiaoyang	An analysis of the microscopic cracking mechanism of hardened alkali-activated slag	466-484
Menapace, Ilaria / Cucalon, Lorena Garcia / Kaseer, Fawaz / Masad, Eyad / Martin, Amy Epps	Application of Low Field Nuclear Magnetic Resonance to evaluate asphalt binder viscosity in recycled mixes	725-736
Androjić, Ivica / Dolaček-Alduk, Zlata	Artificial neural network model for forecasting energy consumption in hot mix asphalt (HMA) production	424-432
Celauro, C. / Praticò, F. G.	Asphalt mixtures modified with basalt fibres for surface courses	245-253
Deng, Hanwen / Liao, Gongyun	Assessment of influence of self-healing behavior on water permeability and mechanical performance of ECC incorporating superabsorbent polymer (SAP) particles	455-465
Zomorodian, Mehdi / Yang, Guang / Belarbi, Abdeldjelil / Ayoub, Ashraf	Behavior of FRP-strengthened RC elements subjected to pure shear	378-391
Sassoni, Enrico / Graziani, Gabriela / Franzoni, Elisa / Scherer, George W.	Conversion of calcium sulfate dihydrate into calcium phosphates as a route for conservation of gypsum stuccoes and sulfated marble	290-301
Słomka-Słupik, Barbara / Podwórny, Jacek / Staszuk, Marcin	Corrosion of cement pastes made of CEM I and CEM III/A caused by a saturated water solution of ammonium chloride after 4 and 25 days of aggressive immersion	279-289
Foti, D. / Vacca, V. / Facchini, I.	DEM modeling and experimental analysis of the static behavior of a dry-joints masonry cross vaults	111-120
Gunn, D. A. / Chambers, J. E. / Dashwood, B. E. / Lacinska, A. / Dijkstra, T. / Uhlemann, S. / Swift, R. / Kirkham, M. / Milodowski, A. / Wragg, J. / Donohue, S.	Deterioration model and condition monitoring of aged railway embankment using non-invasive geophysics	668-678
Chou, Chung-Che / Lee, Chung-Sheng / Wu, Kai-Yi / Chin, V-Liam	Development and validation of a FRP-wrapped spiral corrugated tube for seismic performance of circular concrete columns	498-511
Fergani, Hamed / Di Benedetti, Matteo / Miàs Oller, Cristina / Lynsdale, Cyril / Guadagnini, Maurizio	Durability and degradation mechanisms of GFRP reinforcement subjected to severe environments and sustained stress	637-648
Li, P. P. / Yu, Q. L. / Brouwers, H. J. H.	Effect of coarse basalt aggregates on the properties of Ultra-high Performance Concrete (UHPC)	649-659
Li, Le / Mahmoodian, Mojtaba / Li, Chun-Qing / Robert, Dilan	Effect of corrosion and hydrogen embrittlement on microstructure and mechanical properties of mild steel	78-90
Xu, Xun / Xu, Yuanyuan / Duan, Liling	Effect of fineness and components of CFBC ash on performance of basic magnesium sulfate cement	801-811
Njindam, O. R. / Njoya, D. / Mache, J. R. / Mouafon, M. / Messan, A. / Njopwouo, D.	Effect of glass powder on the technological properties and microstructure of clay mixture for porcelain stoneware tiles manufacture	512-519
Wu, Yu-Ching / Xiao, Jianzhuang	The effect of microscopic cracks on chloride diffusivity of recycled aggregate concrete	326-346
Samantasinghar, Subhashree / Singh, Suresh Prasad	Effect of synthesis parameters on compressive strength of fly ash-slag blended geopolymer	225-234
Le, Huy Viet / Moon, Doyoung / Kim, Dong joo	Effects of ageing and storage conditions on the interfacial bond strength of steel fibers in mortars	129-141
Feng, Hui / Pan, Lisha / Zheng, Qiang / Li, Jiacheng / Xu, Nai / Pang, Sujuan	Effects of molecular structure of polycarboxylate superplasticizers on their dispersion and adsorption behavior in cement paste with two kinds of stone powder	182-192
Kafodya, Innocent / Okonta, F.	Effects of natural fiber inclusions and pre-compression on the strength properties of lime-fly ash stabilised soil	737-746
Hou, Xiaomeng / Cao, Shaojun / Rong, Qin / Zheng, Wenzhong / Li, Gang	Effects of steel fiber and strain rate on the dynamic compressive stress-strain relationship in reactive powder concrete	570-581
Narayanan, Anuja / Shanmugasundaram, Prabavathy	Evaluation of heat resisting behaviour of basalt fibre reinforced FG tiles	679-689
Nogueira, Carnot L. / Rens, Kevin L.	Experimental analysis of cement-based materials under shear stress	392-401
Pourabbas Bilondi, Meysam / Toufigh, Mohammad Mohsen / Toufigh, Vahid	Experimental investigation of using a recycled glass powder-based geopolymer to improve the mechanical behavior of clay soils	302-313
Shen, Yongjiang / Xiang, Zhengliang / Ma, Fei / Mi, Feilong / Chen, Zixian	Experimental study of the gas diffusion coefficient of heated concrete	627-636
Zhao, Panpan / Guo, Chuigen / Li, Liping	Exploring the effect of melamine pyrophosphate and aluminum hypophosphite on flame retardant wood flour/polypropylene composites	193-199
Huang, T. / Zheng, J. L. / Lv, S. T. / Zhang, J. H. / Wen, P. H. / Bailey, C. G.	Failure criterion of an asphalt mixture under three-dimensional stress state	708-715
Koukouselis, Apostolos / Mistakidis, Euripidis	Failure modes and buckling capacity of thin cylindrical reinforced cementitious shells under axial compression	66-77
Li, Hongjiang / Liu, Songyu / Tong, Liyuan	Field investigation of the performance of composite foundations reinforced by DCM-bored piles under lateral loads	690-697
Wu, Qiang / Wang, Chong / Liang, Rui / Liu, Yongchang / Cheng, Jixiang / Kang, Yang	Fractional linear viscoelastic constitutive relations of anhydride-cured thermosetting rubber-like epoxy asphalt binders	582-590
Mai, Khai Quang / Park, Aron / Nguyen, Khoa Tan / Lee, Kihak	Full-scale static and dynamic experiments of hybrid CLT–concrete composite floor	55-65
Sun, Shichang / Lin, Junhao / Zhang, Peixin / Fang, Lin / Ma, Rui / Quan, Zonggang / Song, Xin	Geopolymer synthetized from sludge residue pretreated by the wet alkalinizing method: Compressive strength and immobilization efficiency of heavy metal	619-626
Rémond, Romain / Almeida, Giana / Perré, Patrick	The gripped-box model: A simple and robust formulation of sorption hysteresis for lignocellulosic materials	716-724
De la Varga, I. / Muñoz, J. F. / Bentz, D. P. / Spragg, R. P. / Stutzman, P. E. / Graybeal, B. A.	Grout-concrete interface bond performance: Effect of interface moisture on the tensile bond strength and grout microstructure	747-756
Coppola, Bartolomeo / Courard, Luc / Michel, Frédéric / Incarnato, Loredana / Scarfato, Paola / Di Maio, Luciano	Hygro-thermal and durability properties of a lightweight mortar made with foamed plastic waste aggregates	200-206
Nazari, Hossein / Naderi, Koorosh / Nejad, Fereidoon Moghadas	Improving aging resistance and fatigue performance of asphalt binders using inorganic nanoparticles	591-602
She, Wei / Du, Yi / Zhao, Guotang / Feng, Pan / Zhang, Yunsheng / Cao, Xiaoyu	Influence of coarse fly ash on the performance of foam concrete and its application in high-speed railway roadbeds	153-166
Navarro, R. / Pereira, D. / Gimeno, A. / Del Barrio, S.	Influence of natural carbonation process in serpentinites used as construction and building materials	537-546
Yao, Zhanyong / Zhang, Jizhe / Gao, Faliang / Liu, Shengjie / Yu, Tenghai	Integrated utilization of recycled crumb rubber and polyethylene for enhancing the performance of modified bitumen	217-224
Firouzinia, M. / Shafabakhsh, Gh.	Investigation of the effect of nano-silica on thermal sensitivity of HMA using artificial neural network	527-536
Yalaz, Elif Tugba / Unlu Tavil, Aslihan / Celik, Oguz C.	Lifetime performance evaluation of stick and panel curtain wall systems by full-scale testing	254-271
Rashad, Alaa M.	Lightweight expanded clay aggregate as a building material – An overview	757-775
Ling, Zhibin / Yang, Huifeng / Liu, Weiqing / Zhu, Shijun / Chen, Xin	Local bond stress-slip relationships between glue laminated timber and epoxy bonded-in GFRP rod	1-12
Bairgi, Biswajit K. / Tarefder, Rafiqul A. / Ahmed, Mesbah U.	Long-term rutting and stripping characteristics of foamed warm-mix asphalt (WMA) through laboratory and field investigation	790-800
Feng, Hu / Chen, Gang / Hadi, Muhammad N. S. / Sheikh, M. Neaz / Zhou, Bowen	Mechanical behaviour of micro-fine steel fibre reinforced sulphoaluminate cement composite	91-100
Sideris, Kosmas K. / Tassos, Ch. / Chatzopoulos, A. / Manita, P.	Mechanical characteristics and durability of self compacting concretes produced with ladle furnace slag	660-667
Xu, Jun / Li, Fumin / Zhao, Jie / Huang, Lang	Model of time-dependent and stress-dependent chloride penetration of concrete under sustained axial pressure in the marine environment	207-216
Wang, Lanqin / Hou, Dongshuai / Shang, Huaishuai / Zhao, Tiejun	Molecular dynamics study on the Tri-calcium silicate hydration in sodium sulfate solution: Interface structure, dynamics and dissolution mechanism	402-417
Asadzadeh, Shervin / Khoshbayan, Soheil	Multi-objective optimization of influential factors on production process of foamed concrete using Box-Behnken approach	101-110
Hamard, Erwan / Lemercier, Blandine / Cazacliu, Bogdan / Razakamanantsoa, Andry / Morel, Jean-Claude	A new methodology to identify and quantify material resource at a large scale for earth construction – Application to cob in Brittany	485-497
Jin, Ruoyu / Chen, Qian / Soboyejo, Alfred B. O.	Non-linear and mixed regression models in predicting sustainable concrete strength	142-152
Haddad, Rami H. / Obaidat, Yasmeen T.	A nonlinear finite element model for shear deficient heat-damaged concrete beams repaired using NSM CFRP strips	314-325
Zhang, Shengli / Zhang, Changsuo / Liao, Lin / Wang, Chenlong	Numerical study of the effect of ITZ on the failure behaviour of concrete by using particle element modelling	776-789
Jamshidi Avanaki, Mohammad / Hoseini, Abdollah / Vahdani, Shahram / de la Fuente, Albert	Numerical-aided design of fiber reinforced concrete tunnel segment joints subjected to seismic loads	40-54
Coelho Martuscelli, Carolina / Cesar dos Santos, Júlio / Resende Oliveira, Pablo / Panzera, Tulio Hallak / Paulino Aguilar, Maria Teresa / Thomas García, Carlos	Polymer-cementitious composites containing recycled rubber particles	446-454
Li, Dongqi / Li, Zongli / Lv, Congcong / Zhang, Guohui / Yin, Yueming	A predictive model of the effective tensile and compressive strengths of concrete considering porosity and pore size	520-526
Liu, Yun-Lin / Wang, Yan-Shuai / Fang, Guohao / Alrefaei, Yazan / Dong, Biqin / Xing, Feng	A preliminary study on capsule-based self-healing grouting materials for grouted splice sleeve connection	418-423
Gherdaoui, M. / Guenfoud, M. / Madi, R.	Punching behavior of strengthened and repaired RC slabs with CFRP	272-278
Ali, Yasir / Irfan, Muhammad / Zeeshan, Muhammad / Hafeez, Imran / Ahmed, Shafeeq	Revisiting the relationship of dynamic and resilient modulus test for asphaltic concrete mixtures	698-707
Lizárraga, José Manuel / Ramírez, Antonio / Díaz, Patrícia / Marcobal, José R. / Gallego, Juan	Short-term performance appraisal of half-warm mix asphalt mixtures containing high (70%) and total RAP contents (100%): From laboratory mix design to its full-scale implementation	433-445
Cristelo, Nuno / Fernández-Jiménez, Ana / Vieira, Castorina / Miranda, Tiago / Palomo, Angel	Stabilisation of construction and demolition waste with a high fines content using alkali activated fly ash	26-39
Lim, Sopokhem / Raju, Ramiz Ahmed / Matsuda, Mitsuhiro / Okamoto, Takehiro / Akiyama, Mitsuyoshi	Structural behavior prediction of SFRC beams by a novel integrated approach of X-ray imaging and finite element method	347-365
Gilbert, Benoit P. / Underhill, Ian D. / Fernando, Dilum / Bailleres, Henri / Miller, Dane	Structural behaviour of hardwood veneer-based circular hollow sections of different compactness	557-569
Meng, Rui / Liu, Tao / Zhang, Yimin / Huang, Jing / Yuan, Yizhong / Hu, Pengcheng	Synchronous activation of Si and Al in vanadium-bearing shale leaching residue via sodium carbonate additive	20-25
Huseien, Ghasan Fahim / Ismail, Mohammad / Tahir, Mahmood Md. / Mirza, Jahangir / Khalid, Nur Hafizah A. / Asaad, Mohammad Ali / Husein, Ahmed Abdulameer / Sarbini, Noor Nabilah	Synergism between palm oil fuel ash and slag: Production of environmental-friendly alkali activated mortars with enhanced properties	235-244
Li, Hua / Tian, Qian / Zhao, Haitao / Lu, Anqun / Liu, Jiaping	Temperature sensitivity of MgO expansive agent and its application in temperature crack mitigation in shiplock mass concrete	613-618
Lassoued, Mouna / Mnasri, Taoufik / Hidouri, Abdelmoumen / Ben Younes, Rached	Thermomechanical behavior of Tunisian palm fibers before and after alkalization	121-128
Yurdakul, Arife / Dolekcekic, Emrah / Gunkaya, Goktug / Kavas, Taner / Karasu, Bekir	The usage of newly developed glass fibre in cement structure and their characterization	13-19
Tahami, Seyed Amid / Arabani, Mahyar / Foroutan Mirhosseini, Ali	Usage of two biomass ashes as filler in hot mix asphalt	547-556
Zhou, Xingye / Wang, Xudong / Yuan, Ye / Li, Chun	Using large-scale test to investigate the surface strain of cement/asphalt concrete	603-612
Galvão, J. / Flores-Colen, I. / de Brito, J. / Veiga, M. R.	Variability of in-situ testing on rendered walls in natural ageing conditions – Rebound hammer and ultrasound techniques	167-181
Nerella, Venkatesh Naidu / Mechtcherine, Viktor	Virtual Sliding Pipe Rheometer for estimating pumpability of concrete	366-377

About this
data sheet
IssueID
35493
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - May 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - May 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.