Construction and Building Materials - mai 2018

Publié:	mai 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Li, Zaoyuan / Deng, Zhizhong / Guo, Xiaoyang	An analysis of the microscopic cracking mechanism of hardened alkali-activated slag	466-484
Menapace, Ilaria / Cucalon, Lorena Garcia / Kaseer, Fawaz / Masad, Eyad / Martin, Amy Epps	Application of Low Field Nuclear Magnetic Resonance to evaluate asphalt binder viscosity in recycled mixes	725-736
Androjić, Ivica / Dolaček-Alduk, Zlata	Artificial neural network model for forecasting energy consumption in hot mix asphalt (HMA) production	424-432
Celauro, C. / Praticò, F. G.	Asphalt mixtures modified with basalt fibres for surface courses	245-253
Deng, Hanwen / Liao, Gongyun	Assessment of influence of self-healing behavior on water permeability and mechanical performance of ECC incorporating superabsorbent polymer (SAP) particles	455-465
Zomorodian, Mehdi / Yang, Guang / Belarbi, Abdeldjelil / Ayoub, Ashraf	Behavior of FRP-strengthened RC elements subjected to pure shear	378-391
Sassoni, Enrico / Graziani, Gabriela / Franzoni, Elisa / Scherer, George W.	Conversion of calcium sulfate dihydrate into calcium phosphates as a route for conservation of gypsum stuccoes and sulfated marble	290-301
Słomka-Słupik, Barbara / Podwórny, Jacek / Staszuk, Marcin	Corrosion of cement pastes made of CEM I and CEM III/A caused by a saturated water solution of ammonium chloride after 4 and 25 days of aggressive immersion	279-289
Foti, D. / Vacca, V. / Facchini, I.	DEM modeling and experimental analysis of the static behavior of a dry-joints masonry cross vaults	111-120
Gunn, D. A. / Chambers, J. E. / Dashwood, B. E. / Lacinska, A. / Dijkstra, T. / Uhlemann, S. / Swift, R. / Kirkham, M. / Milodowski, A. / Wragg, J. / Donohue, S.	Deterioration model and condition monitoring of aged railway embankment using non-invasive geophysics	668-678
Chou, Chung-Che / Lee, Chung-Sheng / Wu, Kai-Yi / Chin, V-Liam	Development and validation of a FRP-wrapped spiral corrugated tube for seismic performance of circular concrete columns	498-511
Fergani, Hamed / Di Benedetti, Matteo / Miàs Oller, Cristina / Lynsdale, Cyril / Guadagnini, Maurizio	Durability and degradation mechanisms of GFRP reinforcement subjected to severe environments and sustained stress	637-648
Li, P. P. / Yu, Q. L. / Brouwers, H. J. H.	Effect of coarse basalt aggregates on the properties of Ultra-high Performance Concrete (UHPC)	649-659
Li, Le / Mahmoodian, Mojtaba / Li, Chun-Qing / Robert, Dilan	Effect of corrosion and hydrogen embrittlement on microstructure and mechanical properties of mild steel	78-90
Xu, Xun / Xu, Yuanyuan / Duan, Liling	Effect of fineness and components of CFBC ash on performance of basic magnesium sulfate cement	801-811
Njindam, O. R. / Njoya, D. / Mache, J. R. / Mouafon, M. / Messan, A. / Njopwouo, D.	Effect of glass powder on the technological properties and microstructure of clay mixture for porcelain stoneware tiles manufacture	512-519
Wu, Yu-Ching / Xiao, Jianzhuang	The effect of microscopic cracks on chloride diffusivity of recycled aggregate concrete	326-346
Samantasinghar, Subhashree / Singh, Suresh Prasad	Effect of synthesis parameters on compressive strength of fly ash-slag blended geopolymer	225-234
Le, Huy Viet / Moon, Doyoung / Kim, Dong joo	Effects of ageing and storage conditions on the interfacial bond strength of steel fibers in mortars	129-141
Feng, Hui / Pan, Lisha / Zheng, Qiang / Li, Jiacheng / Xu, Nai / Pang, Sujuan	Effects of molecular structure of polycarboxylate superplasticizers on their dispersion and adsorption behavior in cement paste with two kinds of stone powder	182-192
Kafodya, Innocent / Okonta, F.	Effects of natural fiber inclusions and pre-compression on the strength properties of lime-fly ash stabilised soil	737-746
Hou, Xiaomeng / Cao, Shaojun / Rong, Qin / Zheng, Wenzhong / Li, Gang	Effects of steel fiber and strain rate on the dynamic compressive stress-strain relationship in reactive powder concrete	570-581
Narayanan, Anuja / Shanmugasundaram, Prabavathy	Evaluation of heat resisting behaviour of basalt fibre reinforced FG tiles	679-689
Nogueira, Carnot L. / Rens, Kevin L.	Experimental analysis of cement-based materials under shear stress	392-401
Pourabbas Bilondi, Meysam / Toufigh, Mohammad Mohsen / Toufigh, Vahid	Experimental investigation of using a recycled glass powder-based geopolymer to improve the mechanical behavior of clay soils	302-313
Shen, Yongjiang / Xiang, Zhengliang / Ma, Fei / Mi, Feilong / Chen, Zixian	Experimental study of the gas diffusion coefficient of heated concrete	627-636
Zhao, Panpan / Guo, Chuigen / Li, Liping	Exploring the effect of melamine pyrophosphate and aluminum hypophosphite on flame retardant wood flour/polypropylene composites	193-199
Huang, T. / Zheng, J. L. / Lv, S. T. / Zhang, J. H. / Wen, P. H. / Bailey, C. G.	Failure criterion of an asphalt mixture under three-dimensional stress state	708-715
Koukouselis, Apostolos / Mistakidis, Euripidis	Failure modes and buckling capacity of thin cylindrical reinforced cementitious shells under axial compression	66-77
Li, Hongjiang / Liu, Songyu / Tong, Liyuan	Field investigation of the performance of composite foundations reinforced by DCM-bored piles under lateral loads	690-697
Wu, Qiang / Wang, Chong / Liang, Rui / Liu, Yongchang / Cheng, Jixiang / Kang, Yang	Fractional linear viscoelastic constitutive relations of anhydride-cured thermosetting rubber-like epoxy asphalt binders	582-590
Mai, Khai Quang / Park, Aron / Nguyen, Khoa Tan / Lee, Kihak	Full-scale static and dynamic experiments of hybrid CLT–concrete composite floor	55-65
Sun, Shichang / Lin, Junhao / Zhang, Peixin / Fang, Lin / Ma, Rui / Quan, Zonggang / Song, Xin	Geopolymer synthetized from sludge residue pretreated by the wet alkalinizing method: Compressive strength and immobilization efficiency of heavy metal	619-626
Rémond, Romain / Almeida, Giana / Perré, Patrick	The gripped-box model: A simple and robust formulation of sorption hysteresis for lignocellulosic materials	716-724
De la Varga, I. / Muñoz, J. F. / Bentz, D. P. / Spragg, R. P. / Stutzman, P. E. / Graybeal, B. A.	Grout-concrete interface bond performance: Effect of interface moisture on the tensile bond strength and grout microstructure	747-756
Coppola, Bartolomeo / Courard, Luc / Michel, Frédéric / Incarnato, Loredana / Scarfato, Paola / Di Maio, Luciano	Hygro-thermal and durability properties of a lightweight mortar made with foamed plastic waste aggregates	200-206
Nazari, Hossein / Naderi, Koorosh / Nejad, Fereidoon Moghadas	Improving aging resistance and fatigue performance of asphalt binders using inorganic nanoparticles	591-602
She, Wei / Du, Yi / Zhao, Guotang / Feng, Pan / Zhang, Yunsheng / Cao, Xiaoyu	Influence of coarse fly ash on the performance of foam concrete and its application in high-speed railway roadbeds	153-166
Navarro, R. / Pereira, D. / Gimeno, A. / Del Barrio, S.	Influence of natural carbonation process in serpentinites used as construction and building materials	537-546
Yao, Zhanyong / Zhang, Jizhe / Gao, Faliang / Liu, Shengjie / Yu, Tenghai	Integrated utilization of recycled crumb rubber and polyethylene for enhancing the performance of modified bitumen	217-224
Firouzinia, M. / Shafabakhsh, Gh.	Investigation of the effect of nano-silica on thermal sensitivity of HMA using artificial neural network	527-536
Yalaz, Elif Tugba / Unlu Tavil, Aslihan / Celik, Oguz C.	Lifetime performance evaluation of stick and panel curtain wall systems by full-scale testing	254-271
Rashad, Alaa M.	Lightweight expanded clay aggregate as a building material – An overview	757-775
Ling, Zhibin / Yang, Huifeng / Liu, Weiqing / Zhu, Shijun / Chen, Xin	Local bond stress-slip relationships between glue laminated timber and epoxy bonded-in GFRP rod	1-12
Bairgi, Biswajit K. / Tarefder, Rafiqul A. / Ahmed, Mesbah U.	Long-term rutting and stripping characteristics of foamed warm-mix asphalt (WMA) through laboratory and field investigation	790-800
Feng, Hu / Chen, Gang / Hadi, Muhammad N. S. / Sheikh, M. Neaz / Zhou, Bowen	Mechanical behaviour of micro-fine steel fibre reinforced sulphoaluminate cement composite	91-100
Sideris, Kosmas K. / Tassos, Ch. / Chatzopoulos, A. / Manita, P.	Mechanical characteristics and durability of self compacting concretes produced with ladle furnace slag	660-667
Xu, Jun / Li, Fumin / Zhao, Jie / Huang, Lang	Model of time-dependent and stress-dependent chloride penetration of concrete under sustained axial pressure in the marine environment	207-216
Wang, Lanqin / Hou, Dongshuai / Shang, Huaishuai / Zhao, Tiejun	Molecular dynamics study on the Tri-calcium silicate hydration in sodium sulfate solution: Interface structure, dynamics and dissolution mechanism	402-417
Asadzadeh, Shervin / Khoshbayan, Soheil	Multi-objective optimization of influential factors on production process of foamed concrete using Box-Behnken approach	101-110
Hamard, Erwan / Lemercier, Blandine / Cazacliu, Bogdan / Razakamanantsoa, Andry / Morel, Jean-Claude	A new methodology to identify and quantify material resource at a large scale for earth construction – Application to cob in Brittany	485-497
Jin, Ruoyu / Chen, Qian / Soboyejo, Alfred B. O.	Non-linear and mixed regression models in predicting sustainable concrete strength	142-152
Haddad, Rami H. / Obaidat, Yasmeen T.	A nonlinear finite element model for shear deficient heat-damaged concrete beams repaired using NSM CFRP strips	314-325
Zhang, Shengli / Zhang, Changsuo / Liao, Lin / Wang, Chenlong	Numerical study of the effect of ITZ on the failure behaviour of concrete by using particle element modelling	776-789
Jamshidi Avanaki, Mohammad / Hoseini, Abdollah / Vahdani, Shahram / de la Fuente, Albert	Numerical-aided design of fiber reinforced concrete tunnel segment joints subjected to seismic loads	40-54
Coelho Martuscelli, Carolina / Cesar dos Santos, Júlio / Resende Oliveira, Pablo / Panzera, Tulio Hallak / Paulino Aguilar, Maria Teresa / Thomas García, Carlos	Polymer-cementitious composites containing recycled rubber particles	446-454
Li, Dongqi / Li, Zongli / Lv, Congcong / Zhang, Guohui / Yin, Yueming	A predictive model of the effective tensile and compressive strengths of concrete considering porosity and pore size	520-526
Liu, Yun-Lin / Wang, Yan-Shuai / Fang, Guohao / Alrefaei, Yazan / Dong, Biqin / Xing, Feng	A preliminary study on capsule-based self-healing grouting materials for grouted splice sleeve connection	418-423
Gherdaoui, M. / Guenfoud, M. / Madi, R.	Punching behavior of strengthened and repaired RC slabs with CFRP	272-278
Ali, Yasir / Irfan, Muhammad / Zeeshan, Muhammad / Hafeez, Imran / Ahmed, Shafeeq	Revisiting the relationship of dynamic and resilient modulus test for asphaltic concrete mixtures	698-707
Lizárraga, José Manuel / Ramírez, Antonio / Díaz, Patrícia / Marcobal, José R. / Gallego, Juan	Short-term performance appraisal of half-warm mix asphalt mixtures containing high (70%) and total RAP contents (100%): From laboratory mix design to its full-scale implementation	433-445
Cristelo, Nuno / Fernández-Jiménez, Ana / Vieira, Castorina / Miranda, Tiago / Palomo, Angel	Stabilisation of construction and demolition waste with a high fines content using alkali activated fly ash	26-39
Lim, Sopokhem / Raju, Ramiz Ahmed / Matsuda, Mitsuhiro / Okamoto, Takehiro / Akiyama, Mitsuyoshi	Structural behavior prediction of SFRC beams by a novel integrated approach of X-ray imaging and finite element method	347-365
Gilbert, Benoit P. / Underhill, Ian D. / Fernando, Dilum / Bailleres, Henri / Miller, Dane	Structural behaviour of hardwood veneer-based circular hollow sections of different compactness	557-569
Meng, Rui / Liu, Tao / Zhang, Yimin / Huang, Jing / Yuan, Yizhong / Hu, Pengcheng	Synchronous activation of Si and Al in vanadium-bearing shale leaching residue via sodium carbonate additive	20-25
Huseien, Ghasan Fahim / Ismail, Mohammad / Tahir, Mahmood Md. / Mirza, Jahangir / Khalid, Nur Hafizah A. / Asaad, Mohammad Ali / Husein, Ahmed Abdulameer / Sarbini, Noor Nabilah	Synergism between palm oil fuel ash and slag: Production of environmental-friendly alkali activated mortars with enhanced properties	235-244
Li, Hua / Tian, Qian / Zhao, Haitao / Lu, Anqun / Liu, Jiaping	Temperature sensitivity of MgO expansive agent and its application in temperature crack mitigation in shiplock mass concrete	613-618
Lassoued, Mouna / Mnasri, Taoufik / Hidouri, Abdelmoumen / Ben Younes, Rached	Thermomechanical behavior of Tunisian palm fibers before and after alkalization	121-128
Yurdakul, Arife / Dolekcekic, Emrah / Gunkaya, Goktug / Kavas, Taner / Karasu, Bekir	The usage of newly developed glass fibre in cement structure and their characterization	13-19
Tahami, Seyed Amid / Arabani, Mahyar / Foroutan Mirhosseini, Ali	Usage of two biomass ashes as filler in hot mix asphalt	547-556
Zhou, Xingye / Wang, Xudong / Yuan, Ye / Li, Chun	Using large-scale test to investigate the surface strain of cement/asphalt concrete	603-612
Galvão, J. / Flores-Colen, I. / de Brito, J. / Veiga, M. R.	Variability of in-situ testing on rendered walls in natural ageing conditions – Rebound hammer and ultrasound techniques	167-181
Nerella, Venkatesh Naidu / Mechtcherine, Viktor	Virtual Sliding Pipe Rheometer for estimating pumpability of concrete	366-377

Informations
sur cette fiche
IssueID
35493
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mai 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mai 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.