Construction and Building Materials - July 2018

Published:	July 2018

Articles in this Issue

Author(s)	Title	Page(s)
Kim, G. M. / Yoon, H. N. / Lee, H. K.	Autogenous shrinkage and electrical characteristics of cement pastes and mortars with carbon nanotube and carbon fiber	428-435
Liu, Jiepeng / Teng, Yue / Zhang, Yusong / Wang, Xuanding / Chen, Y. Frank	Axial stress-strain behavior of high-strength concrete confined by circular thin-walled steel tubes	366-377
Ortega, A. Irene / Pellicer, Teresa M. / Calderón, Pedro A. / Adam, José M.	Axially loaded RC columns repaired on one side with cement-based mortars	1-9
Emara, M. / Barris, C. / Baena, M. / Torres, L. / Barros, J.	Bond behavior of NSM CFRP laminates in concrete under sustained loading	237-246
Mu, Yuandong / Liu, Zhichao / Wang, Fazhou / Huang, Xiao	Carbonation characteristics of γ-dicalcium silicate for low-carbon building material	322-331
Gao, Jie / Sha, Aimin / Wang, Zhenjun / Hu, Liqun / Yun, Di / Liu, Zhuangzhuang / Huang, Yue	Characterization of carbon fiber distribution in cement-based composites by Computed Tomography	134-147
Zuquan, Jin / Xia, Zhao / Tiejun, Zhao / Jianqing, Li	Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones	170-183
Deng, Mingke / Yang, Shuo	Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites	395-408
Ogura, Norihiko / Yatsumoto, Hitoshi / Nishida, Takahiro / Shiotani, Tomoki	Damage evaluation of an internal concrete in steel-plate bonded slabs with anchor-bolts	247-251
Jia, Yanshun / Liu, Guoqiang / Gao, Ying / Pei, Jianzhong / Zhao, Yulong / Zhang, Jiupeng	Degradation reliability modeling of stabilized base course materials based on a modulus decrement process	303-313
Chen, De / Liu, Feng / Yang, Fei / Jing, Lin / Feng, Wanhui / Lv, Jianbing / Luo, Qingzi	Dynamic compressive and splitting tensile response of unsaturated polyester polymer concrete material at different curing ages	477-498
Ouyang, Jian / Hu, Lijun / Li, Hongyan / Han, Baoguo	Effect of cement on the demulsifying behavior of over-stabilized asphalt emulsion during mixing	252-260
Khoshroo, Moein / Shirzadi Javid, Ali Akbar / Katebi, Ali	Effect of chloride treatment curing condition on the mechanical properties and durability of concrete containing zeolite and micro-nano-bubble water	417-427
Lee, Jaesung / Sheesley, Evan / Jing, Yuxiang / Xi, Yunping / Willam, Kaspar	The effect of heating and cooling on the bond strength between concrete and steel reinforcement bars with and without epoxy coating	230-236
Singh, Smita / Aswath, M. U. / Ranganath, R. V.	Effect of mechanical activation of red mud on the strength of geopolymer binder	91-101
Wang, Hui / Gao, Xiaojian / Liu, Junzhe	Effects of salt freeze-thaw cycles and cyclic loading on the piezoresistive properties of carbon nanofibers mortar	192-201
Dash, Manoj K. / Patro, Sanjaya K.	Effects of water cooled ferrochrome slag as fine aggregate on the properties of concrete	457-466
Chen, Yuxuan / Yu, Rui / Wang, Xinpeng / Chen, Jie / Shui, Zhonghe	Evaluation and optimization of Ultra-High Performance Concrete (UHPC) subjected to harsh ocean environment: Towards an application of Layered Double Hydroxides (LDHs)	51-62
Riara, Martin / Tang, Ping / Mo, Liantong / Hong, Wei / Chen, Meng / Wu, Shaopeng	Evaluation of moisture and temperature effect on crack healing of asphalt mortar and mixtures using healing agents	388-394
Takeuchi, Caori P. / Estrada, Martin / Linero, Dorian L.	Experimental and numerical modeling of shear behavior of laminated Guadua bamboo for different fiber directions	23-32
Xie, Jingchao / Wang, Wei / Sang, Pengfei / Liu, Jiaping	Experimental and numerical study of thermal performance of the PCM wall with solar radiation	443-456
Yu, Feng / Xu, Guoshi / Niu, Ditao / Cheng, Anchun / Wu, Ping / Kong, Zhengyi	Experimental study on PVC-CFRP confined concrete columns under low cyclic loading	287-302
You, Qinglong / Ma, Jinglian / Liu, Xin	An experimentally-based viscoelastic behavior of asphalt mastic at high temperatures	358-365
Gonen, Tahir	Freezing-thawing and impact resistance of concretes containing waste crumb rubbers	436-442
Sharma, Snigdha / Susan, Divya / Kothiyal, N. C. / Kaur, Ramanjit	Graphene oxide prepared from mechanically milled graphite: Effect on strength of novel fly-ash based cementitious matrix	10-22
Huang, Zujian / Sun, Yimin / Musso, Florian	Hygrothermal performance of natural bamboo fiber and bamboo charcoal as local construction infills in building envelope	342-357
Salemi, Milad / Wang, Hao	Image-aided random aggregate packing for computational modeling of asphalt concrete microstructure	467-476
Dong, Fuqiang / Yu, Xin / Wang, Tianyu / Yin, Long / Li, Ning / Si, Jingjing / Li, Jia	Influence of base asphalt aging levels on the foaming characteristics and rheological properties of foamed asphalt	43-50
Stolz, Carina M. / Masuero, Ângela B.	Influence of grains distribution on the rheological behavior of mortars	261-271
Al-Jabri, K. / Shoukry, H.	Influence of nano metakaolin on thermo-physical, mechanical and microstructural properties of high-volume ferrochrome slag mortar	210-221
Jiang, Yingjun / Deng, Changqing / Xue, Jinshun / Chen, Zhejiang	Investigation into the performance of asphalt mixture designed using different methods	378-387
Blom, Johan / Soenen, Hilde / Katsiki, Antigoni / van den Brande, Niko / Rahier, Hubert / van den bergh, Wim	Investigation of the bulk and surface microstructure of bitumen by atomic force microscopy	158-169
Vazzoler, Janaína dos Santos / Vieira, Geilma Lima / Teles, Claudia Rodrigues / Degen, Maxwell Klein / Teixeira, Roberta Arlêu	Investigation of the potential use of waste from ornamental stone processing after heat treatment for the production of cement-based paste	314-321
Xu, Yidong / Jin, Ruoyu	Measurement of reinforcement corrosion in concrete adopting ultrasonic tests and artificial neural network	125-133
Molaei Raisi, Elias / Vaseghi Amiri, Javad / Davoodi, Mohammad Reza	Mechanical performance of self-compacting concrete incorporating rice husk ash	148-157
Dobiszewska, Magdalena / Schindler, Anton K. / Pichór, Waldemar	Mechanical properties and interfacial transition zone microstructure of concrete with waste basalt powder addition	222-229
Chen, Zongwu / Jiao, Yuyong / Wu, Shaopeng / Tu, Fubin	Moisture-induced damage resistance of asphalt mixture entirely composed of gneiss and steel slag	332-341
Strangfeld, Christoph / Kruschwitz, Sabine	Monitoring of the absolute water content in porous materials based on embedded humidity sensors	511-521
Cheng, X. W. / Khorami, Morteza / Shi, Y. / Liu, K. Q. / Guo, X. Y. / Austin, Stephen / Saidani, Messaoud	A new approach to improve mechanical properties and durability of low-density oil well cement composite reinforced by cellulose fibres in microstructural scale	499-510
Lv, Songtao / Liu, Chaochao / Chen, Dong / Zheng, Jianlong / You, Zhanping / You, Lingyun	Normalization of fatigue characteristics for asphalt mixtures under different stress states	33-42
Jawdhari, Akram / Fam, Amir / Harik, Issam	Numerical study on the bond between CFRP rod panels (CRPs) and concrete	522-534
Yeon, Jung Heum / Kim, Kwan-Kyu	Potential applications of phase change materials to mitigate freeze-thaw deteriorations in concrete pavement	202-209
Tang, Waiching / Wang, Zhiyu / Mohseni, Ehsan / Wang, Shanyong	A practical ranking system for evaluation of industry viable phase change materials for use in concrete	272-286
Wang, Junfeng / Wang, Xuan / Zhan, Tianyi / Zhang, Yaoli / Lv, Chao / He, Qian / Fang, Lu / Lu, Xiaoning	Preparation of hydro-thermal surface-densified plywood inspired by the stiffness difference in "sandwich structure" of wood	83-90
Peña-Pichardo, Patricia / Martínez-Barrera, Gonzalo / Martínez-López, Miguel / Ureña-Núñez, Fernando / Reis, João Marciano Laredo dos	Recovery of cotton fibers from waste Blue-Jeans and its use in polyester concrete	409-416
Vakhshouri, Behnam / Nejadi, Shami	Size effect and age factor in mechanical properties of BST Light Weight Concrete	63-71
Ding, Yao / Yu, Ke-Quan / Yu, Jiang-Tao / Xu, Shi-lang	Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study	102-115
Liu, Mengmei / Han, Sen / Pan, Jun / Ren, Wanyan	Study on cohesion performance of waterborne epoxy resin emulsified asphalt as interlayer materials	72-82
Bisht, Kunal / Ramana, P. V.	Sustainable production of concrete containing discarded beverage glass as fine aggregate	116-124
Zhang, Yuanbo / Liu, Jicheng / Su, Zijian / Liu, Bingbing / Lu, Manman / Li, Guanghui / Anderson, Corby / Jiang, Tao	Utilizing blast furnace slags (BFS) to prepare high-temperature composite phase change materials (C-PCMs)	184-191

About this
data sheet
IssueID
35488
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - July 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - July 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.