Construction and Building Materials - Juli 2018

Erschienen:	Juli 2018

Autor(en)	Titel	Seite(n)
Kim, G. M. / Yoon, H. N. / Lee, H. K.	Autogenous shrinkage and electrical characteristics of cement pastes and mortars with carbon nanotube and carbon fiber	428-435
Liu, Jiepeng / Teng, Yue / Zhang, Yusong / Wang, Xuanding / Chen, Y. Frank	Axial stress-strain behavior of high-strength concrete confined by circular thin-walled steel tubes	366-377
Ortega, A. Irene / Pellicer, Teresa M. / Calderón, Pedro A. / Adam, José M.	Axially loaded RC columns repaired on one side with cement-based mortars	1-9
Emara, M. / Barris, C. / Baena, M. / Torres, L. / Barros, J.	Bond behavior of NSM CFRP laminates in concrete under sustained loading	237-246
Mu, Yuandong / Liu, Zhichao / Wang, Fazhou / Huang, Xiao	Carbonation characteristics of γ-dicalcium silicate for low-carbon building material	322-331
Gao, Jie / Sha, Aimin / Wang, Zhenjun / Hu, Liqun / Yun, Di / Liu, Zhuangzhuang / Huang, Yue	Characterization of carbon fiber distribution in cement-based composites by Computed Tomography	134-147
Zuquan, Jin / Xia, Zhao / Tiejun, Zhao / Jianqing, Li	Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones	170-183
Deng, Mingke / Yang, Shuo	Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites	395-408
Ogura, Norihiko / Yatsumoto, Hitoshi / Nishida, Takahiro / Shiotani, Tomoki	Damage evaluation of an internal concrete in steel-plate bonded slabs with anchor-bolts	247-251
Jia, Yanshun / Liu, Guoqiang / Gao, Ying / Pei, Jianzhong / Zhao, Yulong / Zhang, Jiupeng	Degradation reliability modeling of stabilized base course materials based on a modulus decrement process	303-313
Chen, De / Liu, Feng / Yang, Fei / Jing, Lin / Feng, Wanhui / Lv, Jianbing / Luo, Qingzi	Dynamic compressive and splitting tensile response of unsaturated polyester polymer concrete material at different curing ages	477-498
Ouyang, Jian / Hu, Lijun / Li, Hongyan / Han, Baoguo	Effect of cement on the demulsifying behavior of over-stabilized asphalt emulsion during mixing	252-260
Khoshroo, Moein / Shirzadi Javid, Ali Akbar / Katebi, Ali	Effect of chloride treatment curing condition on the mechanical properties and durability of concrete containing zeolite and micro-nano-bubble water	417-427
Lee, Jaesung / Sheesley, Evan / Jing, Yuxiang / Xi, Yunping / Willam, Kaspar	The effect of heating and cooling on the bond strength between concrete and steel reinforcement bars with and without epoxy coating	230-236
Singh, Smita / Aswath, M. U. / Ranganath, R. V.	Effect of mechanical activation of red mud on the strength of geopolymer binder	91-101
Wang, Hui / Gao, Xiaojian / Liu, Junzhe	Effects of salt freeze-thaw cycles and cyclic loading on the piezoresistive properties of carbon nanofibers mortar	192-201
Dash, Manoj K. / Patro, Sanjaya K.	Effects of water cooled ferrochrome slag as fine aggregate on the properties of concrete	457-466
Chen, Yuxuan / Yu, Rui / Wang, Xinpeng / Chen, Jie / Shui, Zhonghe	Evaluation and optimization of Ultra-High Performance Concrete (UHPC) subjected to harsh ocean environment: Towards an application of Layered Double Hydroxides (LDHs)	51-62
Riara, Martin / Tang, Ping / Mo, Liantong / Hong, Wei / Chen, Meng / Wu, Shaopeng	Evaluation of moisture and temperature effect on crack healing of asphalt mortar and mixtures using healing agents	388-394
Takeuchi, Caori P. / Estrada, Martin / Linero, Dorian L.	Experimental and numerical modeling of shear behavior of laminated Guadua bamboo for different fiber directions	23-32
Xie, Jingchao / Wang, Wei / Sang, Pengfei / Liu, Jiaping	Experimental and numerical study of thermal performance of the PCM wall with solar radiation	443-456
Yu, Feng / Xu, Guoshi / Niu, Ditao / Cheng, Anchun / Wu, Ping / Kong, Zhengyi	Experimental study on PVC-CFRP confined concrete columns under low cyclic loading	287-302
You, Qinglong / Ma, Jinglian / Liu, Xin	An experimentally-based viscoelastic behavior of asphalt mastic at high temperatures	358-365
Gonen, Tahir	Freezing-thawing and impact resistance of concretes containing waste crumb rubbers	436-442
Sharma, Snigdha / Susan, Divya / Kothiyal, N. C. / Kaur, Ramanjit	Graphene oxide prepared from mechanically milled graphite: Effect on strength of novel fly-ash based cementitious matrix	10-22
Huang, Zujian / Sun, Yimin / Musso, Florian	Hygrothermal performance of natural bamboo fiber and bamboo charcoal as local construction infills in building envelope	342-357
Salemi, Milad / Wang, Hao	Image-aided random aggregate packing for computational modeling of asphalt concrete microstructure	467-476
Dong, Fuqiang / Yu, Xin / Wang, Tianyu / Yin, Long / Li, Ning / Si, Jingjing / Li, Jia	Influence of base asphalt aging levels on the foaming characteristics and rheological properties of foamed asphalt	43-50
Stolz, Carina M. / Masuero, Ângela B.	Influence of grains distribution on the rheological behavior of mortars	261-271
Al-Jabri, K. / Shoukry, H.	Influence of nano metakaolin on thermo-physical, mechanical and microstructural properties of high-volume ferrochrome slag mortar	210-221
Jiang, Yingjun / Deng, Changqing / Xue, Jinshun / Chen, Zhejiang	Investigation into the performance of asphalt mixture designed using different methods	378-387
Blom, Johan / Soenen, Hilde / Katsiki, Antigoni / van den Brande, Niko / Rahier, Hubert / van den bergh, Wim	Investigation of the bulk and surface microstructure of bitumen by atomic force microscopy	158-169
Vazzoler, Janaína dos Santos / Vieira, Geilma Lima / Teles, Claudia Rodrigues / Degen, Maxwell Klein / Teixeira, Roberta Arlêu	Investigation of the potential use of waste from ornamental stone processing after heat treatment for the production of cement-based paste	314-321
Xu, Yidong / Jin, Ruoyu	Measurement of reinforcement corrosion in concrete adopting ultrasonic tests and artificial neural network	125-133
Molaei Raisi, Elias / Vaseghi Amiri, Javad / Davoodi, Mohammad Reza	Mechanical performance of self-compacting concrete incorporating rice husk ash	148-157
Dobiszewska, Magdalena / Schindler, Anton K. / Pichór, Waldemar	Mechanical properties and interfacial transition zone microstructure of concrete with waste basalt powder addition	222-229
Chen, Zongwu / Jiao, Yuyong / Wu, Shaopeng / Tu, Fubin	Moisture-induced damage resistance of asphalt mixture entirely composed of gneiss and steel slag	332-341
Strangfeld, Christoph / Kruschwitz, Sabine	Monitoring of the absolute water content in porous materials based on embedded humidity sensors	511-521
Cheng, X. W. / Khorami, Morteza / Shi, Y. / Liu, K. Q. / Guo, X. Y. / Austin, Stephen / Saidani, Messaoud	A new approach to improve mechanical properties and durability of low-density oil well cement composite reinforced by cellulose fibres in microstructural scale	499-510
Lv, Songtao / Liu, Chaochao / Chen, Dong / Zheng, Jianlong / You, Zhanping / You, Lingyun	Normalization of fatigue characteristics for asphalt mixtures under different stress states	33-42
Jawdhari, Akram / Fam, Amir / Harik, Issam	Numerical study on the bond between CFRP rod panels (CRPs) and concrete	522-534
Yeon, Jung Heum / Kim, Kwan-Kyu	Potential applications of phase change materials to mitigate freeze-thaw deteriorations in concrete pavement	202-209
Tang, Waiching / Wang, Zhiyu / Mohseni, Ehsan / Wang, Shanyong	A practical ranking system for evaluation of industry viable phase change materials for use in concrete	272-286
Wang, Junfeng / Wang, Xuan / Zhan, Tianyi / Zhang, Yaoli / Lv, Chao / He, Qian / Fang, Lu / Lu, Xiaoning	Preparation of hydro-thermal surface-densified plywood inspired by the stiffness difference in "sandwich structure" of wood	83-90
Peña-Pichardo, Patricia / Martínez-Barrera, Gonzalo / Martínez-López, Miguel / Ureña-Núñez, Fernando / Reis, João Marciano Laredo dos	Recovery of cotton fibers from waste Blue-Jeans and its use in polyester concrete	409-416
Vakhshouri, Behnam / Nejadi, Shami	Size effect and age factor in mechanical properties of BST Light Weight Concrete	63-71
Ding, Yao / Yu, Ke-Quan / Yu, Jiang-Tao / Xu, Shi-lang	Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study	102-115
Liu, Mengmei / Han, Sen / Pan, Jun / Ren, Wanyan	Study on cohesion performance of waterborne epoxy resin emulsified asphalt as interlayer materials	72-82
Bisht, Kunal / Ramana, P. V.	Sustainable production of concrete containing discarded beverage glass as fine aggregate	116-124
Zhang, Yuanbo / Liu, Jicheng / Su, Zijian / Liu, Bingbing / Lu, Manman / Li, Guanghui / Anderson, Corby / Jiang, Tao	Utilizing blast furnace slags (BFS) to prepare high-temperature composite phase change materials (C-PCMs)	184-191

Autor(en)

Titel

Seite(n)

Kim, G. M. / Yoon, H. N. / Lee, H. K.

Autogenous shrinkage and electrical characteristics of cement pastes and mortars with carbon nanotube and carbon fiber

428-435

Liu, Jiepeng / Teng, Yue / Zhang, Yusong / Wang, Xuanding / Chen, Y. Frank

Axial stress-strain behavior of high-strength concrete confined by circular thin-walled steel tubes

366-377

Ortega, A. Irene / Pellicer, Teresa M. / Calderón, Pedro A. / Adam, José M.

Axially loaded RC columns repaired on one side with cement-based mortars

1-9

Emara, M. / Barris, C. / Baena, M. / Torres, L. / Barros, J.

Bond behavior of NSM CFRP laminates in concrete under sustained loading

237-246

Mu, Yuandong / Liu, Zhichao / Wang, Fazhou / Huang, Xiao

Carbonation characteristics of γ-dicalcium silicate for low-carbon building material

322-331

Gao, Jie / Sha, Aimin / Wang, Zhenjun / Hu, Liqun / Yun, Di / Liu, Zhuangzhuang / Huang, Yue

Characterization of carbon fiber distribution in cement-based composites by Computed Tomography

134-147

Zuquan, Jin / Xia, Zhao / Tiejun, Zhao / Jianqing, Li

Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones

170-183

Deng, Mingke / Yang, Shuo

Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites

395-408

Ogura, Norihiko / Yatsumoto, Hitoshi / Nishida, Takahiro / Shiotani, Tomoki

Damage evaluation of an internal concrete in steel-plate bonded slabs with anchor-bolts

247-251

Jia, Yanshun / Liu, Guoqiang / Gao, Ying / Pei, Jianzhong / Zhao, Yulong / Zhang, Jiupeng

Degradation reliability modeling of stabilized base course materials based on a modulus decrement process

303-313

Chen, De / Liu, Feng / Yang, Fei / Jing, Lin / Feng, Wanhui / Lv, Jianbing / Luo, Qingzi

Dynamic compressive and splitting tensile response of unsaturated polyester polymer concrete material at different curing ages

477-498

Ouyang, Jian / Hu, Lijun / Li, Hongyan / Han, Baoguo

Effect of cement on the demulsifying behavior of over-stabilized asphalt emulsion during mixing

252-260

Khoshroo, Moein / Shirzadi Javid, Ali Akbar / Katebi, Ali

Effect of chloride treatment curing condition on the mechanical properties and durability of concrete containing zeolite and micro-nano-bubble water

417-427

Lee, Jaesung / Sheesley, Evan / Jing, Yuxiang / Xi, Yunping / Willam, Kaspar

The effect of heating and cooling on the bond strength between concrete and steel reinforcement bars with and without epoxy coating

230-236

Singh, Smita / Aswath, M. U. / Ranganath, R. V.

Effect of mechanical activation of red mud on the strength of geopolymer binder

91-101

Wang, Hui / Gao, Xiaojian / Liu, Junzhe

Effects of salt freeze-thaw cycles and cyclic loading on the piezoresistive properties of carbon nanofibers mortar

192-201

Dash, Manoj K. / Patro, Sanjaya K.

Effects of water cooled ferrochrome slag as fine aggregate on the properties of concrete

457-466

Chen, Yuxuan / Yu, Rui / Wang, Xinpeng / Chen, Jie / Shui, Zhonghe

Evaluation and optimization of Ultra-High Performance Concrete (UHPC) subjected to harsh ocean environment: Towards an application of Layered Double Hydroxides (LDHs)

51-62

Riara, Martin / Tang, Ping / Mo, Liantong / Hong, Wei / Chen, Meng / Wu, Shaopeng

Evaluation of moisture and temperature effect on crack healing of asphalt mortar and mixtures using healing agents

388-394

Takeuchi, Caori P. / Estrada, Martin / Linero, Dorian L.

Experimental and numerical modeling of shear behavior of laminated Guadua bamboo for different fiber directions

23-32

Xie, Jingchao / Wang, Wei / Sang, Pengfei / Liu, Jiaping

Experimental and numerical study of thermal performance of the PCM wall with solar radiation

443-456

Yu, Feng / Xu, Guoshi / Niu, Ditao / Cheng, Anchun / Wu, Ping / Kong, Zhengyi

Experimental study on PVC-CFRP confined concrete columns under low cyclic loading

287-302

You, Qinglong / Ma, Jinglian / Liu, Xin

An experimentally-based viscoelastic behavior of asphalt mastic at high temperatures

358-365

Gonen, Tahir

Freezing-thawing and impact resistance of concretes containing waste crumb rubbers

436-442

Sharma, Snigdha / Susan, Divya / Kothiyal, N. C. / Kaur, Ramanjit

Graphene oxide prepared from mechanically milled graphite: Effect on strength of novel fly-ash based cementitious matrix

10-22

Huang, Zujian / Sun, Yimin / Musso, Florian

Hygrothermal performance of natural bamboo fiber and bamboo charcoal as local construction infills in building envelope

342-357

Salemi, Milad / Wang, Hao

Image-aided random aggregate packing for computational modeling of asphalt concrete microstructure

467-476

Dong, Fuqiang / Yu, Xin / Wang, Tianyu / Yin, Long / Li, Ning / Si, Jingjing / Li, Jia

Influence of base asphalt aging levels on the foaming characteristics and rheological properties of foamed asphalt

43-50

Stolz, Carina M. / Masuero, Ângela B.

Influence of grains distribution on the rheological behavior of mortars

261-271

Al-Jabri, K. / Shoukry, H.

Influence of nano metakaolin on thermo-physical, mechanical and microstructural properties of high-volume ferrochrome slag mortar

210-221

Jiang, Yingjun / Deng, Changqing / Xue, Jinshun / Chen, Zhejiang

Investigation into the performance of asphalt mixture designed using different methods

378-387

Blom, Johan / Soenen, Hilde / Katsiki, Antigoni / van den Brande, Niko / Rahier, Hubert / van den bergh, Wim

Investigation of the bulk and surface microstructure of bitumen by atomic force microscopy

158-169

Vazzoler, Janaína dos Santos / Vieira, Geilma Lima / Teles, Claudia Rodrigues / Degen, Maxwell Klein / Teixeira, Roberta Arlêu

Investigation of the potential use of waste from ornamental stone processing after heat treatment for the production of cement-based paste

314-321

Xu, Yidong / Jin, Ruoyu

Measurement of reinforcement corrosion in concrete adopting ultrasonic tests and artificial neural network

125-133

Molaei Raisi, Elias / Vaseghi Amiri, Javad / Davoodi, Mohammad Reza

Mechanical performance of self-compacting concrete incorporating rice husk ash

148-157

Dobiszewska, Magdalena / Schindler, Anton K. / Pichór, Waldemar

Mechanical properties and interfacial transition zone microstructure of concrete with waste basalt powder addition

222-229

Chen, Zongwu / Jiao, Yuyong / Wu, Shaopeng / Tu, Fubin

Moisture-induced damage resistance of asphalt mixture entirely composed of gneiss and steel slag

332-341

Strangfeld, Christoph / Kruschwitz, Sabine

Monitoring of the absolute water content in porous materials based on embedded humidity sensors

511-521

Cheng, X. W. / Khorami, Morteza / Shi, Y. / Liu, K. Q. / Guo, X. Y. / Austin, Stephen / Saidani, Messaoud

A new approach to improve mechanical properties and durability of low-density oil well cement composite reinforced by cellulose fibres in microstructural scale

499-510

Lv, Songtao / Liu, Chaochao / Chen, Dong / Zheng, Jianlong / You, Zhanping / You, Lingyun

Normalization of fatigue characteristics for asphalt mixtures under different stress states

33-42

Jawdhari, Akram / Fam, Amir / Harik, Issam

Numerical study on the bond between CFRP rod panels (CRPs) and concrete

522-534

Yeon, Jung Heum / Kim, Kwan-Kyu

Potential applications of phase change materials to mitigate freeze-thaw deteriorations in concrete pavement

202-209

Tang, Waiching / Wang, Zhiyu / Mohseni, Ehsan / Wang, Shanyong

A practical ranking system for evaluation of industry viable phase change materials for use in concrete

272-286

Wang, Junfeng / Wang, Xuan / Zhan, Tianyi / Zhang, Yaoli / Lv, Chao / He, Qian / Fang, Lu / Lu, Xiaoning

Preparation of hydro-thermal surface-densified plywood inspired by the stiffness difference in "sandwich structure" of wood

83-90

Peña-Pichardo, Patricia / Martínez-Barrera, Gonzalo / Martínez-López, Miguel / Ureña-Núñez, Fernando / Reis, João Marciano Laredo dos

Recovery of cotton fibers from waste Blue-Jeans and its use in polyester concrete

409-416

Vakhshouri, Behnam / Nejadi, Shami

Size effect and age factor in mechanical properties of BST Light Weight Concrete

63-71

Ding, Yao / Yu, Ke-Quan / Yu, Jiang-Tao / Xu, Shi-lang

Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study

102-115

Liu, Mengmei / Han, Sen / Pan, Jun / Ren, Wanyan

Study on cohesion performance of waterborne epoxy resin emulsified asphalt as interlayer materials

72-82

Bisht, Kunal / Ramana, P. V.

Sustainable production of concrete containing discarded beverage glass as fine aggregate

116-124

Zhang, Yuanbo / Liu, Jicheng / Su, Zijian / Liu, Bingbing / Lu, Manman / Li, Guanghui / Anderson, Corby / Jiang, Tao

Utilizing blast furnace slags (BFS) to prepare high-temperature composite phase change materials (C-PCMs)

184-191

Anzeige

Construction and Building Materials - Juli 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.