Construction and Building Materials - July 2018

Published:	July 2018

Articles in this Issue

Author(s)	Title	Page(s)
Vidales Barriguete, Alejandra / Merino, Mercedes del Río / Atanes Sánchez, Evangelina / Piña Ramírez, Carolina / Viñas Arrebola, Carmen	Analysis of the feasibility of the use of CDW as a low-environmental-impact aggregate in conglomerates	83-91
Chen, Hongbing / Xu, Bin / Mo, Y. L. / Zhou, Tianmin	Behavior of meso-scale heterogeneous concrete under uniaxial tensile and compressive loadings	418-431
Shah, Vineet / Bishnoi, Shashank	Carbonation resistance of cements containing supplementary cementitious materials and its relation to various parameters of concrete	219-232
Maaroufi, Maroua / Abahri, Kamilia / El Hachem, Chady / Belarbi, Rafik	Characterization of EPS lightweight concrete microstructure by X-ray tomography with consideration of thermal variations	339-348
Rehman, Shahir / Iqbal, Shahid / Ali, Ahsan	Combined influence of glass powder and granular steel slag on fresh and mechanical properties of self-compacting concrete	153-160
Morillas, Héctor / Vazquez, Patricia / Maguregui, Maite / Marcaida, Iker / Silva, Luis F. O.	Composition and porosity study of original and restoration materials included in a coastal historical construction	384-392
Ilić, Biljana / Mitrović, Aleksandra / Miličić, Ljiljana / Zdujić, Miodrag	Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins	92-101
Tran, T-T. / Thi, V-D. / Khelifa, M. / Oudjene, M. / Rogaume, Y.	A constitutive numerical modelling of hybrid-based timber beams with partial composite action	462-472
Lozinguez, Eric / Barthélémy, Jean-François / Bouteiller, Véronique / Desbois, Tiffany	Contribution of Sacrificial Anode in reinforced concrete patch repair: Results of numerical simulations	405-417
Wu, Xun / Ye, Dihang / Li, Hui / Yu, Hua	Corrosion characteristics of S23043 duplex stainless steel bars	135-143
Thermou, Georgia E. / Hajirasouliha, Iman	Design-oriented models for concrete columns confined by steel-reinforced grout jackets	313-326
Kang, Yong Hak / Choi, Young Cheol	Development of non-sintered zero-OPC binders using circulating fluidized bed combustion ash	562-573
Cao, Zhilong / Xue, Lihui / Wu, Min / He, Bianyang / Yu, Jianying / Chen, Meizhu	Effect of etched Layered double hydroxides on anti ultraviolet aging properties of bitumen	42-50
Yoon, H. N. / Park, S. M. / Lee, H. K.	Effect of MgO on chloride penetration resistance of alkali-activated binder	584-592
Li, Tan / Xiao, Jianzhuang / Sui, Tongbo / Liang, Chaofeng / Li, Long	Effect of recycled coarse aggregate to damping variation of concrete	445-452
He, Hongsen / Zhang, Enhao / Fatokoun, Serge / Shan, Liyan	Effect of the softer binder on the performance of repeated RAP binder	280-287
Ayar, Pooyan	Effects of additives on the mechanical performance in recycled mixtures with bitumen emulsion: An overview	551-561
Kobayashi, Koichi / Suzuki, Masato / Dung, Le Anh / Yun, Hyun-Do / Rokugo, Keitetsu	The effects of PE and PVA fiber and water cement ratio on chloride penetration and rebar corrosion protection performance of cracked SHCC	372-383
Lee, Chih-Hsuan / Yang, Te-Hsin / Cheng, Ya-Wen / Lee, Chia-Ju	Effects of thermal modification on the surface and chemical properties of moso bamboo	59-71
Kim, Min-Jae / Kim, Soonho / Yoo, Doo-Yeol / Shin, Hyun-Oh	Enhancing mechanical properties of asphalt concrete using synthetic fibers	233-243
Mansourian, Ahmad / Hashemi, Shabnam / Aliha, Mohammad Reza Mohammad	Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement	10-18
Tahersima, Mohammad / Tikalsky, Paul	Experimental and numerical study on heating performance of the mass and thin concrete radiant floors with ground source systems	360-371
Kabir, Muhammad Ikramul / Subhani, Mahbube / Shrestha, Rijun / Samali, Bijan	Experimental and theoretical analysis of severely damaged concrete beams strengthened with CFRP	161-174
Shi, Jun / Li, Weitao / Zheng, Kaikai / Yang, Kangkang / Zhou, Guangchun	Experimental investigation into stressing state characteristics of large-curvature continuous steel box-girder bridge model	574-583
Jin, Liu / Zhang, Renbo / Tian, Yudong / Dou, Guoqin / Du, Xiuli	Experimental investigation on static and dynamic mechanical properties of steel fiber reinforced ultra-high-strength concretes	102-111
Xie, Jianhe / Huang, Liang / Guo, Yongchang / Li, Zhijian / Fang, Chi / Li, Lijuan / Wang, Junjie	Experimental study on the compressive and flexural behaviour of recycled aggregate concrete modified with silica fume and fibres	612-623
Secrieru, Egor / Khodor, Jad / Schröfl, Christof / Mechtcherine, Viktor	Formation of lubricating layer and flow type during pumping of cement-based materials	507-517
Silva, R. V. / de Brito, J. / Dhir, R. K.	Fresh-state performance of recycled aggregate concrete: A review	19-31
Ranieri, M. / Celauro, C.	Improvement of high modulus asphalt mixtures with average quality aggregate and bitumen by application of polymeric additives	183-194
Tran, Khiem Quang / Satomi, Tomoaki / Takahashi, Hiroshi	Improvement of mechanical behavior of cemented soil reinforced with waste cornsilk fibers	204-210
Lim, Jian Hui / Panda, Biranchi / Pham, Quang-Cuong	Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement	32-41
Shermi, C. / Dubey, R. N.	In-plane behaviour of unreinforced masonry panel strengthened with welded wire mesh and mortar	195-203
Karimi, Mohammad M. / Jahanbakhsh, Hamid / Jahangiri, Behnam / Nejad, F. Moghadas	Induced heating-healing characterization of activated carbon modified asphalt concrete under microwave radiation	254-271
Mahzabin, Mst. Sadia / Hock, Lim Jee / Hossain, Md. Shabbir / Kang, Lim Siong	The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite	518-528
Tang, W. C. / Wang, Z. / Liu, Y. / Cui, H. Z.	Influence of red mud on fresh and hardened properties of self-compacting concrete	288-300
Wu, Shuyin / Yang, Jun / Yang, Ruochong / Zhu, Jipeng / Liu, Song / Wang, Caoyuan	Investigation of microscopic air void structure of anti-freezing asphalt pavement with X-ray CT and MIP	473-483
Sadrinejad, Iman / Madandoust, Rahmat / Ranjbar, Malek Mohammad	The mechanical and durability properties of concrete containing hybrid synthetic fibers	72-82
Rocha, Thais da Silva / Dias, Dylmar Penteado / França, Fernando César Coelho / Guerra, Rafael Rangel de Salles / Marques, Larissa Rodrigues da Costa de Oliveira	Metakaolin-based geopolymer mortars with different alkaline activators (Na + and K + )	453-461
Liu, Kai / Li, Yao / Wang, Fang / Ren, Jingge / Xie, Hongzhou	Modeling and experimental study of multiple factors on mechanical strength of iron sand modified cement mortars	144-152
Tian, Ye / Tian, Zushi / Jin, Nanguo / Jin, Xianyu / Yu, Wei	A multiphase numerical simulation of chloride ions diffusion in concrete using electron microprobe analysis for characterizing properties of ITZ	432-444
Kong, Xiangqing / Qi, Xuejian / Gu, Yihan / Lawan, Isah Abba / Qu, Yandong	Numerical evaluation of blast resistance of RC slab strengthened with AFRP	244-253
de Moraes Pinheiro, Sayonara Maria / Font, Alba / Soriano, Lourdes / Tashima, Mauro M. / Monzó, José / Borrachero, María Victoria / Payá, Jordi	Olive-stone biomass ash (OBA): An alternative alkaline source for the blast furnace slag activation	327-338
Luga, Erion / Atis, Cengiz Duran	Optimization of heat cured fly ash/slag blend geopolymer mortars designed by "Combined Design" method: Part 1	393-404
Saberian, Mohammad / Li, Jie / Nguyen, Bao / Wang, George	Permanent deformation behaviour of pavement base and subbase containing recycle concrete aggregate, coarse and fine crumb rubber	51-58
Cha, Sang-Lyul / Jin, Seung-Seop / An, Gyeong-Hee / Kim, Jin-Keun	A prediction approach of concrete properties at early ages by using a thermal stress device	120-134
Xu, Xinxin / Gu, Hairong / Dong, Qiangzhu / Li, Jinping / Jiao, Shengjie / Ren, Juan	Quick heating method of asphalt pavement in hot in-place recycling	211-218
Xu, Linglin / Liu, Siyu / Li, Nan / Peng, Yu / Wu, Kai / Wang, Peiming	Retardation effect of elevated temperature on the setting of calcium sulfoaluminate cement clinker	112-119
Xia, Tian / Zhou, Longmei / Xu, Jianhui / Qin, Yaping / Chen, Wenqiang / Dai, Jianfeng	Rheology and thermal stability of polymer modified bitumen with coexistence of amorphous phase and crystalline phase	272-279
Pradhan, Subhasis / Kumar, Shailendra / Barai, Sudhirkumar V.	Shear performance of recycled aggregate concrete beams: An insight for design aspects	593-611
Wan, Jiuming / Wu, Shaopeng / Xiao, Yue / Chen, Zongwu / Zhang, Dong	Study on the effective composition of steel slag for asphalt mixture induction heating purpose	542-550
Ahsan, Mohammad Badrul / Hossain, Zahid	Supplemental use of rice husk ash (RHA) as a cementitious material in concrete industry	1-9
Si, Wei / Ma, Biao / Zhou, Xue-yan / Ren, Jun-ping / Tian, Yu-xiang / Li, Yi	Temperature responses of asphalt mixture physical and finite element models constructed with phase change material	529-541
Huang, Bo-Tao / Li, Qing-hua / Xu, Shi-lang / Zhou, Bao-Min	Tensile fatigue behavior of fiber-reinforced cementitious material with high ductility: Experimental study and novel P - S - N model	349-359
Casagrande, Cézar Augusto / Pialarissi Cavalaro, Sergio Henrique / Longuini Repette, Wellington	Ultra-high performance fibre-reinforced cementitious composite with steel microfibres functionalized with silane	495-506
Abdallah, Sadoon / Rees, David W. A. / Ghaffar, Seyed Hamidreza / Fan, Mizi	Understanding the effects of hooked-end steel fibre geometry on the uniaxial tensile behaviour of self-compacting concrete	484-494
Jayasuriya, Anuruddha / Adams, Matthew P. / Bandelt, Matthew J.	Understanding variability in recycled aggregate concrete mechanical properties through numerical simulation and statistical evaluation	301-312
Li, Xiangguo / Liu, Zhuolin / Lv, Yang / Cai, Lixiong / Jiang, Dongbing / Jiang, Wenguang / Jian, Shouwei	Utilization of municipal solid waste incineration bottom ash in autoclaved aerated concrete	175-182

About this
data sheet
IssueID
35486
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - July 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - July 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.