Construction and Building Materials - juillet 2018

Publié:	juillet 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Vidales Barriguete, Alejandra / Merino, Mercedes del Río / Atanes Sánchez, Evangelina / Piña Ramírez, Carolina / Viñas Arrebola, Carmen	Analysis of the feasibility of the use of CDW as a low-environmental-impact aggregate in conglomerates	83-91
Chen, Hongbing / Xu, Bin / Mo, Y. L. / Zhou, Tianmin	Behavior of meso-scale heterogeneous concrete under uniaxial tensile and compressive loadings	418-431
Shah, Vineet / Bishnoi, Shashank	Carbonation resistance of cements containing supplementary cementitious materials and its relation to various parameters of concrete	219-232
Maaroufi, Maroua / Abahri, Kamilia / El Hachem, Chady / Belarbi, Rafik	Characterization of EPS lightweight concrete microstructure by X-ray tomography with consideration of thermal variations	339-348
Rehman, Shahir / Iqbal, Shahid / Ali, Ahsan	Combined influence of glass powder and granular steel slag on fresh and mechanical properties of self-compacting concrete	153-160
Morillas, Héctor / Vazquez, Patricia / Maguregui, Maite / Marcaida, Iker / Silva, Luis F. O.	Composition and porosity study of original and restoration materials included in a coastal historical construction	384-392
Ilić, Biljana / Mitrović, Aleksandra / Miličić, Ljiljana / Zdujić, Miodrag	Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins	92-101
Tran, T-T. / Thi, V-D. / Khelifa, M. / Oudjene, M. / Rogaume, Y.	A constitutive numerical modelling of hybrid-based timber beams with partial composite action	462-472
Lozinguez, Eric / Barthélémy, Jean-François / Bouteiller, Véronique / Desbois, Tiffany	Contribution of Sacrificial Anode in reinforced concrete patch repair: Results of numerical simulations	405-417
Wu, Xun / Ye, Dihang / Li, Hui / Yu, Hua	Corrosion characteristics of S23043 duplex stainless steel bars	135-143
Thermou, Georgia E. / Hajirasouliha, Iman	Design-oriented models for concrete columns confined by steel-reinforced grout jackets	313-326
Kang, Yong Hak / Choi, Young Cheol	Development of non-sintered zero-OPC binders using circulating fluidized bed combustion ash	562-573
Cao, Zhilong / Xue, Lihui / Wu, Min / He, Bianyang / Yu, Jianying / Chen, Meizhu	Effect of etched Layered double hydroxides on anti ultraviolet aging properties of bitumen	42-50
Yoon, H. N. / Park, S. M. / Lee, H. K.	Effect of MgO on chloride penetration resistance of alkali-activated binder	584-592
Li, Tan / Xiao, Jianzhuang / Sui, Tongbo / Liang, Chaofeng / Li, Long	Effect of recycled coarse aggregate to damping variation of concrete	445-452
He, Hongsen / Zhang, Enhao / Fatokoun, Serge / Shan, Liyan	Effect of the softer binder on the performance of repeated RAP binder	280-287
Ayar, Pooyan	Effects of additives on the mechanical performance in recycled mixtures with bitumen emulsion: An overview	551-561
Kobayashi, Koichi / Suzuki, Masato / Dung, Le Anh / Yun, Hyun-Do / Rokugo, Keitetsu	The effects of PE and PVA fiber and water cement ratio on chloride penetration and rebar corrosion protection performance of cracked SHCC	372-383
Lee, Chih-Hsuan / Yang, Te-Hsin / Cheng, Ya-Wen / Lee, Chia-Ju	Effects of thermal modification on the surface and chemical properties of moso bamboo	59-71
Kim, Min-Jae / Kim, Soonho / Yoo, Doo-Yeol / Shin, Hyun-Oh	Enhancing mechanical properties of asphalt concrete using synthetic fibers	233-243
Mansourian, Ahmad / Hashemi, Shabnam / Aliha, Mohammad Reza Mohammad	Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement	10-18
Tahersima, Mohammad / Tikalsky, Paul	Experimental and numerical study on heating performance of the mass and thin concrete radiant floors with ground source systems	360-371
Kabir, Muhammad Ikramul / Subhani, Mahbube / Shrestha, Rijun / Samali, Bijan	Experimental and theoretical analysis of severely damaged concrete beams strengthened with CFRP	161-174
Shi, Jun / Li, Weitao / Zheng, Kaikai / Yang, Kangkang / Zhou, Guangchun	Experimental investigation into stressing state characteristics of large-curvature continuous steel box-girder bridge model	574-583
Jin, Liu / Zhang, Renbo / Tian, Yudong / Dou, Guoqin / Du, Xiuli	Experimental investigation on static and dynamic mechanical properties of steel fiber reinforced ultra-high-strength concretes	102-111
Xie, Jianhe / Huang, Liang / Guo, Yongchang / Li, Zhijian / Fang, Chi / Li, Lijuan / Wang, Junjie	Experimental study on the compressive and flexural behaviour of recycled aggregate concrete modified with silica fume and fibres	612-623
Secrieru, Egor / Khodor, Jad / Schröfl, Christof / Mechtcherine, Viktor	Formation of lubricating layer and flow type during pumping of cement-based materials	507-517
Silva, R. V. / de Brito, J. / Dhir, R. K.	Fresh-state performance of recycled aggregate concrete: A review	19-31
Ranieri, M. / Celauro, C.	Improvement of high modulus asphalt mixtures with average quality aggregate and bitumen by application of polymeric additives	183-194
Tran, Khiem Quang / Satomi, Tomoaki / Takahashi, Hiroshi	Improvement of mechanical behavior of cemented soil reinforced with waste cornsilk fibers	204-210
Lim, Jian Hui / Panda, Biranchi / Pham, Quang-Cuong	Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement	32-41
Shermi, C. / Dubey, R. N.	In-plane behaviour of unreinforced masonry panel strengthened with welded wire mesh and mortar	195-203
Karimi, Mohammad M. / Jahanbakhsh, Hamid / Jahangiri, Behnam / Nejad, F. Moghadas	Induced heating-healing characterization of activated carbon modified asphalt concrete under microwave radiation	254-271
Mahzabin, Mst. Sadia / Hock, Lim Jee / Hossain, Md. Shabbir / Kang, Lim Siong	The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite	518-528
Tang, W. C. / Wang, Z. / Liu, Y. / Cui, H. Z.	Influence of red mud on fresh and hardened properties of self-compacting concrete	288-300
Wu, Shuyin / Yang, Jun / Yang, Ruochong / Zhu, Jipeng / Liu, Song / Wang, Caoyuan	Investigation of microscopic air void structure of anti-freezing asphalt pavement with X-ray CT and MIP	473-483
Sadrinejad, Iman / Madandoust, Rahmat / Ranjbar, Malek Mohammad	The mechanical and durability properties of concrete containing hybrid synthetic fibers	72-82
Rocha, Thais da Silva / Dias, Dylmar Penteado / França, Fernando César Coelho / Guerra, Rafael Rangel de Salles / Marques, Larissa Rodrigues da Costa de Oliveira	Metakaolin-based geopolymer mortars with different alkaline activators (Na + and K + )	453-461
Liu, Kai / Li, Yao / Wang, Fang / Ren, Jingge / Xie, Hongzhou	Modeling and experimental study of multiple factors on mechanical strength of iron sand modified cement mortars	144-152
Tian, Ye / Tian, Zushi / Jin, Nanguo / Jin, Xianyu / Yu, Wei	A multiphase numerical simulation of chloride ions diffusion in concrete using electron microprobe analysis for characterizing properties of ITZ	432-444
Kong, Xiangqing / Qi, Xuejian / Gu, Yihan / Lawan, Isah Abba / Qu, Yandong	Numerical evaluation of blast resistance of RC slab strengthened with AFRP	244-253
de Moraes Pinheiro, Sayonara Maria / Font, Alba / Soriano, Lourdes / Tashima, Mauro M. / Monzó, José / Borrachero, María Victoria / Payá, Jordi	Olive-stone biomass ash (OBA): An alternative alkaline source for the blast furnace slag activation	327-338
Luga, Erion / Atis, Cengiz Duran	Optimization of heat cured fly ash/slag blend geopolymer mortars designed by "Combined Design" method: Part 1	393-404
Saberian, Mohammad / Li, Jie / Nguyen, Bao / Wang, George	Permanent deformation behaviour of pavement base and subbase containing recycle concrete aggregate, coarse and fine crumb rubber	51-58
Cha, Sang-Lyul / Jin, Seung-Seop / An, Gyeong-Hee / Kim, Jin-Keun	A prediction approach of concrete properties at early ages by using a thermal stress device	120-134
Xu, Xinxin / Gu, Hairong / Dong, Qiangzhu / Li, Jinping / Jiao, Shengjie / Ren, Juan	Quick heating method of asphalt pavement in hot in-place recycling	211-218
Xu, Linglin / Liu, Siyu / Li, Nan / Peng, Yu / Wu, Kai / Wang, Peiming	Retardation effect of elevated temperature on the setting of calcium sulfoaluminate cement clinker	112-119
Xia, Tian / Zhou, Longmei / Xu, Jianhui / Qin, Yaping / Chen, Wenqiang / Dai, Jianfeng	Rheology and thermal stability of polymer modified bitumen with coexistence of amorphous phase and crystalline phase	272-279
Pradhan, Subhasis / Kumar, Shailendra / Barai, Sudhirkumar V.	Shear performance of recycled aggregate concrete beams: An insight for design aspects	593-611
Wan, Jiuming / Wu, Shaopeng / Xiao, Yue / Chen, Zongwu / Zhang, Dong	Study on the effective composition of steel slag for asphalt mixture induction heating purpose	542-550
Ahsan, Mohammad Badrul / Hossain, Zahid	Supplemental use of rice husk ash (RHA) as a cementitious material in concrete industry	1-9
Si, Wei / Ma, Biao / Zhou, Xue-yan / Ren, Jun-ping / Tian, Yu-xiang / Li, Yi	Temperature responses of asphalt mixture physical and finite element models constructed with phase change material	529-541
Huang, Bo-Tao / Li, Qing-hua / Xu, Shi-lang / Zhou, Bao-Min	Tensile fatigue behavior of fiber-reinforced cementitious material with high ductility: Experimental study and novel P - S - N model	349-359
Casagrande, Cézar Augusto / Pialarissi Cavalaro, Sergio Henrique / Longuini Repette, Wellington	Ultra-high performance fibre-reinforced cementitious composite with steel microfibres functionalized with silane	495-506
Abdallah, Sadoon / Rees, David W. A. / Ghaffar, Seyed Hamidreza / Fan, Mizi	Understanding the effects of hooked-end steel fibre geometry on the uniaxial tensile behaviour of self-compacting concrete	484-494
Jayasuriya, Anuruddha / Adams, Matthew P. / Bandelt, Matthew J.	Understanding variability in recycled aggregate concrete mechanical properties through numerical simulation and statistical evaluation	301-312
Li, Xiangguo / Liu, Zhuolin / Lv, Yang / Cai, Lixiong / Jiang, Dongbing / Jiang, Wenguang / Jian, Shouwei	Utilization of municipal solid waste incineration bottom ash in autoclaved aerated concrete	175-182

Informations
sur cette fiche
IssueID
35486
Publié(e) le:
12.12.2019
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - juillet 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juillet 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.