Construction and Building Materials - August 2018

Published:	August 2018

Articles in this Issue

Author(s)	Title	Page(s)
Mechtcherine, Viktor / Grafe, Jasmin / Nerella, Venkatesh N. / Spaniol, Erik / Hertel, Martin / Füssel, Uwe	3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour	125-137
Angulo-Ramírez, Daniela Eugenia / Mejía de Gutiérrez, Ruby / Medeiros, Marcelo	Alkali-activated Portland blast furnace slag cement mortars: Performance to alkali-aggregate reaction	49-56
Liu, Yiquan / Sidhu, Kevindev Singh / Chen, Zhitao / Yang, En-Hua	Alkali-treated incineration bottom ash as supplementary cementitious materials	371-378
Kitek Kuzman, Manja / Klaric, Sanela / Pirc Barčić, Andreja / Vlosky, Richard P. / Janakieska, Marija M. / Grošelj, Petra	Architect perceptions of engineered wood products: An exploratory study of selected countries in Central and Southeast Europe	360-370
Alachek, Ibrahim / Reboul, Nadège / Jurkiewiez, Bruno	Bond strength’s degradation of GFRP-concrete elements under aggressive exposure conditions	512-525
Chlayon, Tom / Iwanami, Mitsuyasu / Chijiwa, Nobuhiro	Combined protective action of barnacles and biofilm on concrete surface in intertidal areas	477-487
Ferrotto, M. F. / Cavaleri, L. / Papia, M.	Compressive response of substandard steel-jacketed RC columns strengthened under sustained service loads: From the local to the global behavior	500-511
Fodil, Dif / Mohamed, Mouli	Compressive strength and corrosion evaluation of concretes containing pozzolana and perlite immersed in aggressive environments	25-34
Omranian, Seyed Reza / Hamzah, Meor Othman / Valentin, Jan / Mohd Hasan, Mohd Rosli	Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method	35-48
Luo, Rong / Huang, Tingting	Development of a three-dimensional diffusion model for water vapor diffusing into asphalt mixtures	526-536
Liang, Xiangwei / Wu, Chengqing / Su, Yu / Chen, Zhu / Li, Zhongxian	Development of ultra-high performance concrete with high fire resistance	400-412
Tang, Waiching / Mohseni, Ehsan / Wang, Zhiyu	Development of vegetation concrete technology for slope protection and greening	605-613
Angelidi, Myrsini / Vassilopoulos, Anastasios P. / Keller, Thomas	Ductile adhesively-bonded timber joints – Part 1: Experimental investigation	692-703
Angelidi, Myrsini / Keller, Thomas	Ductile adhesively-bonded timber joints – Part 2: Strain rate effect	704-713
Subathra Devi, V.	Durability properties of multiple blended concrete	649-660
Ahmad, M. A. A. / Abdul Majid, M. S. / Ridzuan, M. J. M. / Mazlee, M. N. / Gibson, A. G.	Dynamic mechanical analysis and effects of moisture on mechanical properties of interwoven hemp/polyethylene terephthalate (PET) hybrid composites	265-276
Gómez-Meijide, Breixo / Ajam, Harith / Lastra-González, Pedro / García, Álvaro	Effect of ageing and RAP content on the induction healing properties of asphalt mixtures	468-476
Zhang, Xiaoyuan / Gu, Xingyu / Lv, Junxiu	Effect of basalt fiber distribution on the flexural–tensile rheological performance of asphalt mortar	307-314
Xiang, Yu / Xie, Youjun / Long, Guangcheng	Effect of basalt fiber surface silane coupling agent coating on fiber-reinforced asphalt: From macro-mechanical performance to micro-interfacial mechanism	107-116
Jiao, Zhenzhen / Wang, Ying / Zheng, Wenzhong / Huang, Wenxuan	Effect of dosage of sodium carbonate on the strength and drying shrinkage of sodium hydroxide based alkali-activated slag paste	11-24
Gao, Shuling / Wang, Zhe / Wang, Wenchang / Qiu, Huafang	Effect of shrinkage-reducing admixture and expansive agent on mechanical properties and drying shrinkage of Engineered Cementitious Composite (ECC)	172-185
Sakthieswaran, N. / Sophia, M.	Effect of superplasticizers on the properties of latex modified gypsum plaster	675-691
Ma, Baoguo / Zhang, Ting / Tan, Hongbo / Liu, Xiaohai / Mei, Junpeng / Qi, Huahui / Jiang, Wenbin / Zou, Fubing	Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste	89-99
Elaqra, Hossam / Rustom, Rifat	Effect of using glass powder as cement replacement on rheological and mechanical properties of cement paste	326-335
Xie, Yue / Li, Jun / Lu, Zhongyuan / Jiang, Jun / Niu, Yunhui	Effects of bentonite slurry on air-void structure and properties of foamed concrete	207-219
Soares, António / de Fátima Júlio, Maria / Flores-Colen, Inês / Ilharco, Laura M. / de Brito, Jorge	EN 998-1 performance requirements for thermal aerogel-based renders	453-460
Sreeram, Anand / Leng, Zhen / Zhang, Yuan / Padhan, Rabindra Kumar	Evaluation of RAP binder mobilisation and blending efficiency in bituminous mixtures: An approach using ATR-FTIR and artificial aggregate	245-253
Jiang, Hongguang / Zhang, Jizhe / Sun, Changjun / Liu, Shengjie / Liang, Ming / Yao, Zhanyong	Experimental assessment on engineering properties of aged bitumen incorporating a developed rejuvenator	1-10
Liu, Lang / Fang, Zhiyu / Qi, Chongchong / Zhang, Bo / Guo, Lijie / Song, Ki-Il	Experimental investigation on the relationship between pore characteristics and unconfined compressive strength of cemented paste backfill	254-264
Yu, Zhenpeng / Huang, Qiao / Xie, Xinghua / Xiao, Ning	Experimental study and failure criterion analysis of plain concrete under combined compression-shear stress	198-206
Mahyar, Mahdi / Turhan Erdoğan, Sinan / Tokyay, Mustafa	Extension of the chemical index model for estimating Alkali-Silica reaction mitigation efficiency to slags and natural pozzolans	587-597
Li, Lijuan / Hou, Bin / Lu, Zhongyu / Liu, Feng	Fatigue behaviour of sea sand concrete beams reinforced with basalt fibre-reinforced polymer bars	160-171
Savva, Pericles / Petrou, Michael F.	Highly absorptive normal weight aggregates for internal curing of concrete	80-88
Wang, Duanyi / Liang, Xiayi / Jiang, Caifeng / Pan, Yanzhu	Impact analysis of Carboxyl Latex on the performance of semi-flexible pavement using warm-mix technology	566-575
Guo, Ming-Zhi / Tu, Zhenjun / Poon, Chi Sun / Shi, Caijun	Improvement of properties of architectural mortars prepared with 100% recycled glass by CO2 curing	138-150
Mo, Kim Hung / Lee, Hong Jie / Liu, Michael Yong Jing / Ling, Tung-Chai	Incorporation of expanded vermiculite lightweight aggregate in cement mortar	302-306
Evans, Mark / Lucas, Andrew / Ingram, Ian	The inspection of level crossing rails using guided waves	614-618
Savva, Pericles / Nicolaides, Demetris / Petrou, Michael F.	Internal curing for mitigating high temperature concreting effects	598-604
Ma, Zexin / Liu, Liping / Sun, Lijun	Investigation of top-down cracking performance of in-situ asphalt mixtures based on accelerated pavement testing and laboratory tests	277-284
Zhang, Gaowang / Zhang, Hongliang / Bu, Xinde / Yang, Hongzhi	Laboratory study on performances of bimaleimide/unsaturated polyester resin modified asphalt	576-586
Gupta, Trilok / Siddique, Salman / Sharma, Ravi Kumar / Chaudhary, Sandeep	Lateral force microscopic examination of calcium silicate hydrate in rubber ash concrete	461-467
Laukkanen, Olli-Ville / Soenen, Hilde / Winter, H. Henning / Seppälä, Jukka	Low-temperature rheological and morphological characterization of SBS modified bitumen	348-359
Foti, D. / Cavallo, D.	Mechanical behavior of concretes made with non-conventional organic origin calcareous aggregates	100-106
Guo, Xiaolu / Pan, Xuejiao	Mechanical properties and mechanisms of fiber reinforced fly ash–steel slag based geopolymer mortar	633-641
Cuenca, Estefanía / Tejedor, Antonio / Ferrara, Liberato	A methodology to assess crack-sealing effectiveness of crystalline admixtures under repeated cracking-healing cycles	619-632
Long, Wu-Jian / Gu, Yu-Cun / Xiao, Bing-Xu / Zhang, Qi-ming / Xing, Feng	Micro-mechanical properties and multi-scaled pore structure of graphene oxide cement paste: Synergistic application of nanoindentation, X-ray computed tomography, and SEM-EDS analysis	661-674
Zhang, Wei / Han, Baoguo / Yu, Xun / Ruan, Yanfeng / Ou, Jinping	Nano boron nitride modified reactive powder concrete	186-197
Peng, Fengping / Ni, Yaru / Zhou, Qiang / Kou, Jiahui / Lu, Chunhua / Xu, Zhongzi	New g-C3N4 based photocatalytic cement with enhanced visible-light photocatalytic activity by constructing muscovite sheet/SnO2 structures	315-325
Caprili, Silvia / Salvatore, Walter / Valentini, Renzo / Ascanio, Cristiano / Luvarà, Gianbruno	A new generation of high-ductile Dual-Phase steel reinforcing bars	66-79
Jiang, Wen-Qiang / Shen, Xiao-han / Xia, Jin / Mao, Li-xuan / Yang, Jian / Liu, Qing-feng	A numerical study on chloride diffusion in freeze-thaw affected concrete	553-565
Phrompet, Chaiwat / Sriwong, Chaval / Maensiri, Santi / Chindaprasirt, Prinya / Ruttanapun, Chesta	Optical and dielectric properties of nano-sized tricalcium aluminate hexahydrate (C3AH6) cement	57-65
Espinoza-Luque, Arturo F. / Al-Qadi, Imad L. / Ozer, Hasan	Optimizing rejuvenator content in asphalt concrete to enhance its durability	642-648
Maccarini, Helena / Vasconcelos, Graça / Rodrigues, Hugo / Ortega, Javier / Lourenço, Paulo B.	Out-of-plane behavior of stone masonry walls: Experimental and numerical analysis	430-452
Tajra, Feras / Abd Elrahman, Mohamed / Chung, Sang-Yeop / Stephan, Dietmar	Performance assessment of core-shell structured lightweight aggregate produced by cold bonding pelletization process	220-231
Hu, Zun-Xiang / Hu, Xiang-Ming / Cheng, Wei-Min / Zhao, Yan-Yun / Wu, Ming-Yue	Performance optimization of one-component polyurethane healing agent for self-healing concrete	151-159
Chen, Fangjie / Li, Chun-Qing / Baji, Hassan / Ma, Baoguo	Quantification of steel-concrete interface in reinforced concrete using Backscattered Electron imaging technique	420-429
Farhan, Ahmed Hilal / Dawson, Andrew Robert / Thom, Nicholas Howard	Recycled hybrid fiber-reinforced & cement-stabilized pavement mixtures: Tensile properties and cracking characterization	488-499
Sreedhar, Shashwath / Coleri, Erdem / Haddadi, Sogol Sadat	Selection of a performance test to assess the cracking resistance of asphalt concrete materials	285-293
Lin, Feng / Hua, Jiayao	Shear transfer of concrete strengthened with externally bonded CFRP strips inclined to shear plane	379-389
Subashi de Silva, G. H. M. J. / Mallwattha, M. P. D. P.	Strength, durability, thermal and run-off properties of fired clay roof tiles incorporated with ceramic sludge	390-399
Zhang, Haitao / Gong, Mingyang	Study on durability of composite-modified asphalt mixture based on inherent and improved performance	539-552
Cai, X. / Wu, K. H. / Huang, W. K. / Wan, C.	Study on the correlation between aggregate skeleton characteristics and rutting performance of asphalt mixture	294-301
Ye, Qianqian / Wang, Wen / Zhang, Wei / Li, Jianzhang / Chen, Hui	Tuning the phase structure and mechanical performance of magnesium oxychloride cements by curing temperature and H2O/MgCl2 ratio	413-419
Kuz'min, M. P. / Larionov, L. M. / Kondratiev, V. V. / Kuz'mina, M. Yu. / Grigoriev, V. G. / Kuz'mina, A. S.	Use of the burnt rock of coal deposits slag heaps in the concrete products manufacturing	117-124
Cicek, Bugra / Karadagli, Emirhan / Duman, Fatma	Valorisation of boron mining wastes in the production of wall and floor tiles	232-244
Fang, Guohao / Liu, Yuqing / Qin, Shaofeng / Ding, Weijian / Zhang, Jianchao / Hong, Shuxian / Xing, Feng / Dong, Biqin	Visualized tracing of crack self-healing features in cement/microcapsule system with X-ray microcomputed tomography	336-347

About this
data sheet
IssueID
35485
Published on:
12/12/2019
Last updated on:
09/01/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - August 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - August 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.