Construction and Building Materials - August 2018

Erschienen:	August 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Mechtcherine, Viktor / Grafe, Jasmin / Nerella, Venkatesh N. / Spaniol, Erik / Hertel, Martin / Füssel, Uwe	3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour	125-137
Angulo-Ramírez, Daniela Eugenia / Mejía de Gutiérrez, Ruby / Medeiros, Marcelo	Alkali-activated Portland blast furnace slag cement mortars: Performance to alkali-aggregate reaction	49-56
Liu, Yiquan / Sidhu, Kevindev Singh / Chen, Zhitao / Yang, En-Hua	Alkali-treated incineration bottom ash as supplementary cementitious materials	371-378
Kitek Kuzman, Manja / Klaric, Sanela / Pirc Barčić, Andreja / Vlosky, Richard P. / Janakieska, Marija M. / Grošelj, Petra	Architect perceptions of engineered wood products: An exploratory study of selected countries in Central and Southeast Europe	360-370
Alachek, Ibrahim / Reboul, Nadège / Jurkiewiez, Bruno	Bond strength’s degradation of GFRP-concrete elements under aggressive exposure conditions	512-525
Chlayon, Tom / Iwanami, Mitsuyasu / Chijiwa, Nobuhiro	Combined protective action of barnacles and biofilm on concrete surface in intertidal areas	477-487
Ferrotto, M. F. / Cavaleri, L. / Papia, M.	Compressive response of substandard steel-jacketed RC columns strengthened under sustained service loads: From the local to the global behavior	500-511
Fodil, Dif / Mohamed, Mouli	Compressive strength and corrosion evaluation of concretes containing pozzolana and perlite immersed in aggressive environments	25-34
Omranian, Seyed Reza / Hamzah, Meor Othman / Valentin, Jan / Mohd Hasan, Mohd Rosli	Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method	35-48
Luo, Rong / Huang, Tingting	Development of a three-dimensional diffusion model for water vapor diffusing into asphalt mixtures	526-536
Liang, Xiangwei / Wu, Chengqing / Su, Yu / Chen, Zhu / Li, Zhongxian	Development of ultra-high performance concrete with high fire resistance	400-412
Tang, Waiching / Mohseni, Ehsan / Wang, Zhiyu	Development of vegetation concrete technology for slope protection and greening	605-613
Angelidi, Myrsini / Vassilopoulos, Anastasios P. / Keller, Thomas	Ductile adhesively-bonded timber joints – Part 1: Experimental investigation	692-703
Angelidi, Myrsini / Keller, Thomas	Ductile adhesively-bonded timber joints – Part 2: Strain rate effect	704-713
Subathra Devi, V.	Durability properties of multiple blended concrete	649-660
Ahmad, M. A. A. / Abdul Majid, M. S. / Ridzuan, M. J. M. / Mazlee, M. N. / Gibson, A. G.	Dynamic mechanical analysis and effects of moisture on mechanical properties of interwoven hemp/polyethylene terephthalate (PET) hybrid composites	265-276
Gómez-Meijide, Breixo / Ajam, Harith / Lastra-González, Pedro / García, Álvaro	Effect of ageing and RAP content on the induction healing properties of asphalt mixtures	468-476
Zhang, Xiaoyuan / Gu, Xingyu / Lv, Junxiu	Effect of basalt fiber distribution on the flexural–tensile rheological performance of asphalt mortar	307-314
Xiang, Yu / Xie, Youjun / Long, Guangcheng	Effect of basalt fiber surface silane coupling agent coating on fiber-reinforced asphalt: From macro-mechanical performance to micro-interfacial mechanism	107-116
Jiao, Zhenzhen / Wang, Ying / Zheng, Wenzhong / Huang, Wenxuan	Effect of dosage of sodium carbonate on the strength and drying shrinkage of sodium hydroxide based alkali-activated slag paste	11-24
Gao, Shuling / Wang, Zhe / Wang, Wenchang / Qiu, Huafang	Effect of shrinkage-reducing admixture and expansive agent on mechanical properties and drying shrinkage of Engineered Cementitious Composite (ECC)	172-185
Sakthieswaran, N. / Sophia, M.	Effect of superplasticizers on the properties of latex modified gypsum plaster	675-691
Ma, Baoguo / Zhang, Ting / Tan, Hongbo / Liu, Xiaohai / Mei, Junpeng / Qi, Huahui / Jiang, Wenbin / Zou, Fubing	Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste	89-99
Elaqra, Hossam / Rustom, Rifat	Effect of using glass powder as cement replacement on rheological and mechanical properties of cement paste	326-335
Xie, Yue / Li, Jun / Lu, Zhongyuan / Jiang, Jun / Niu, Yunhui	Effects of bentonite slurry on air-void structure and properties of foamed concrete	207-219
Soares, António / de Fátima Júlio, Maria / Flores-Colen, Inês / Ilharco, Laura M. / de Brito, Jorge	EN 998-1 performance requirements for thermal aerogel-based renders	453-460
Sreeram, Anand / Leng, Zhen / Zhang, Yuan / Padhan, Rabindra Kumar	Evaluation of RAP binder mobilisation and blending efficiency in bituminous mixtures: An approach using ATR-FTIR and artificial aggregate	245-253
Jiang, Hongguang / Zhang, Jizhe / Sun, Changjun / Liu, Shengjie / Liang, Ming / Yao, Zhanyong	Experimental assessment on engineering properties of aged bitumen incorporating a developed rejuvenator	1-10
Liu, Lang / Fang, Zhiyu / Qi, Chongchong / Zhang, Bo / Guo, Lijie / Song, Ki-Il	Experimental investigation on the relationship between pore characteristics and unconfined compressive strength of cemented paste backfill	254-264
Yu, Zhenpeng / Huang, Qiao / Xie, Xinghua / Xiao, Ning	Experimental study and failure criterion analysis of plain concrete under combined compression-shear stress	198-206
Mahyar, Mahdi / Turhan Erdoğan, Sinan / Tokyay, Mustafa	Extension of the chemical index model for estimating Alkali-Silica reaction mitigation efficiency to slags and natural pozzolans	587-597
Li, Lijuan / Hou, Bin / Lu, Zhongyu / Liu, Feng	Fatigue behaviour of sea sand concrete beams reinforced with basalt fibre-reinforced polymer bars	160-171
Savva, Pericles / Petrou, Michael F.	Highly absorptive normal weight aggregates for internal curing of concrete	80-88
Wang, Duanyi / Liang, Xiayi / Jiang, Caifeng / Pan, Yanzhu	Impact analysis of Carboxyl Latex on the performance of semi-flexible pavement using warm-mix technology	566-575
Guo, Ming-Zhi / Tu, Zhenjun / Poon, Chi Sun / Shi, Caijun	Improvement of properties of architectural mortars prepared with 100% recycled glass by CO2 curing	138-150
Mo, Kim Hung / Lee, Hong Jie / Liu, Michael Yong Jing / Ling, Tung-Chai	Incorporation of expanded vermiculite lightweight aggregate in cement mortar	302-306
Evans, Mark / Lucas, Andrew / Ingram, Ian	The inspection of level crossing rails using guided waves	614-618
Savva, Pericles / Nicolaides, Demetris / Petrou, Michael F.	Internal curing for mitigating high temperature concreting effects	598-604
Ma, Zexin / Liu, Liping / Sun, Lijun	Investigation of top-down cracking performance of in-situ asphalt mixtures based on accelerated pavement testing and laboratory tests	277-284
Zhang, Gaowang / Zhang, Hongliang / Bu, Xinde / Yang, Hongzhi	Laboratory study on performances of bimaleimide/unsaturated polyester resin modified asphalt	576-586
Gupta, Trilok / Siddique, Salman / Sharma, Ravi Kumar / Chaudhary, Sandeep	Lateral force microscopic examination of calcium silicate hydrate in rubber ash concrete	461-467
Laukkanen, Olli-Ville / Soenen, Hilde / Winter, H. Henning / Seppälä, Jukka	Low-temperature rheological and morphological characterization of SBS modified bitumen	348-359
Foti, D. / Cavallo, D.	Mechanical behavior of concretes made with non-conventional organic origin calcareous aggregates	100-106
Guo, Xiaolu / Pan, Xuejiao	Mechanical properties and mechanisms of fiber reinforced fly ash–steel slag based geopolymer mortar	633-641
Cuenca, Estefanía / Tejedor, Antonio / Ferrara, Liberato	A methodology to assess crack-sealing effectiveness of crystalline admixtures under repeated cracking-healing cycles	619-632
Long, Wu-Jian / Gu, Yu-Cun / Xiao, Bing-Xu / Zhang, Qi-ming / Xing, Feng	Micro-mechanical properties and multi-scaled pore structure of graphene oxide cement paste: Synergistic application of nanoindentation, X-ray computed tomography, and SEM-EDS analysis	661-674
Zhang, Wei / Han, Baoguo / Yu, Xun / Ruan, Yanfeng / Ou, Jinping	Nano boron nitride modified reactive powder concrete	186-197
Peng, Fengping / Ni, Yaru / Zhou, Qiang / Kou, Jiahui / Lu, Chunhua / Xu, Zhongzi	New g-C3N4 based photocatalytic cement with enhanced visible-light photocatalytic activity by constructing muscovite sheet/SnO2 structures	315-325
Caprili, Silvia / Salvatore, Walter / Valentini, Renzo / Ascanio, Cristiano / Luvarà, Gianbruno	A new generation of high-ductile Dual-Phase steel reinforcing bars	66-79
Jiang, Wen-Qiang / Shen, Xiao-han / Xia, Jin / Mao, Li-xuan / Yang, Jian / Liu, Qing-feng	A numerical study on chloride diffusion in freeze-thaw affected concrete	553-565
Phrompet, Chaiwat / Sriwong, Chaval / Maensiri, Santi / Chindaprasirt, Prinya / Ruttanapun, Chesta	Optical and dielectric properties of nano-sized tricalcium aluminate hexahydrate (C3AH6) cement	57-65
Espinoza-Luque, Arturo F. / Al-Qadi, Imad L. / Ozer, Hasan	Optimizing rejuvenator content in asphalt concrete to enhance its durability	642-648
Maccarini, Helena / Vasconcelos, Graça / Rodrigues, Hugo / Ortega, Javier / Lourenço, Paulo B.	Out-of-plane behavior of stone masonry walls: Experimental and numerical analysis	430-452
Tajra, Feras / Abd Elrahman, Mohamed / Chung, Sang-Yeop / Stephan, Dietmar	Performance assessment of core-shell structured lightweight aggregate produced by cold bonding pelletization process	220-231
Hu, Zun-Xiang / Hu, Xiang-Ming / Cheng, Wei-Min / Zhao, Yan-Yun / Wu, Ming-Yue	Performance optimization of one-component polyurethane healing agent for self-healing concrete	151-159
Chen, Fangjie / Li, Chun-Qing / Baji, Hassan / Ma, Baoguo	Quantification of steel-concrete interface in reinforced concrete using Backscattered Electron imaging technique	420-429
Farhan, Ahmed Hilal / Dawson, Andrew Robert / Thom, Nicholas Howard	Recycled hybrid fiber-reinforced & cement-stabilized pavement mixtures: Tensile properties and cracking characterization	488-499
Sreedhar, Shashwath / Coleri, Erdem / Haddadi, Sogol Sadat	Selection of a performance test to assess the cracking resistance of asphalt concrete materials	285-293
Lin, Feng / Hua, Jiayao	Shear transfer of concrete strengthened with externally bonded CFRP strips inclined to shear plane	379-389
Subashi de Silva, G. H. M. J. / Mallwattha, M. P. D. P.	Strength, durability, thermal and run-off properties of fired clay roof tiles incorporated with ceramic sludge	390-399
Zhang, Haitao / Gong, Mingyang	Study on durability of composite-modified asphalt mixture based on inherent and improved performance	539-552
Cai, X. / Wu, K. H. / Huang, W. K. / Wan, C.	Study on the correlation between aggregate skeleton characteristics and rutting performance of asphalt mixture	294-301
Ye, Qianqian / Wang, Wen / Zhang, Wei / Li, Jianzhang / Chen, Hui	Tuning the phase structure and mechanical performance of magnesium oxychloride cements by curing temperature and H2O/MgCl2 ratio	413-419
Kuz'min, M. P. / Larionov, L. M. / Kondratiev, V. V. / Kuz'mina, M. Yu. / Grigoriev, V. G. / Kuz'mina, A. S.	Use of the burnt rock of coal deposits slag heaps in the concrete products manufacturing	117-124
Cicek, Bugra / Karadagli, Emirhan / Duman, Fatma	Valorisation of boron mining wastes in the production of wall and floor tiles	232-244
Fang, Guohao / Liu, Yuqing / Qin, Shaofeng / Ding, Weijian / Zhang, Jianchao / Hong, Shuxian / Xing, Feng / Dong, Biqin	Visualized tracing of crack self-healing features in cement/microcapsule system with X-ray microcomputed tomography	336-347

Über diese
Datenseite
IssueID
35485
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.