Construction and Building Materials - November 2019

Published:	November 2019

Articles in this Issue

Author(s)	Title	Page(s)
Kruger, Jacques / Zeranka, Stephan / van Zijl, Gideon	An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete	372-386
Zhu, Lin / Dang, Faning / Xue, Yi / Ding, Weihua / Zhang, Le	Analysis of micro-structural damage evolution of concrete through coupled X-ray computed tomography and gray-level co-occurrence matrices method	534-550
Jing, Lei / Yin, Shi-ping / Duan, Ke	Analysis of the interface bond property between the concrete and steel bar under textile reinforced concrete confinement	447-454
Zhang, Jiaguang / Zhao, Cheng / Zhou, Aijuan / Yang, Chao / Zhao, Lin / Li, Zhu	Aragonite formation induced by open cultures of microbial consortia to heal cracks in concrete: Insights into healing mechanisms and crystal polymorphs	815-822
Achara, Bitrus Emmanuel / Mohammed, Bashar S. / Liew, M. S.	Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology	796-814
Yoo, Doo-Yeol / Choi, Hong-Joon / Kim, Soonho	Bond-slip response of novel half-hooked steel fibers in ultra-high-performance concrete	743-761
Asad, Mohammad / Dhanasekar, Manicka / Zahra, Tatheer / Thambiratnam, David	Characterisation of polymer cement mortar composites containing carbon fibre or auxetic fabric overlays and inserts under flexure	863-879
Pyo, Sukhoon / Koh, Taehoon / Tafesse, Million / Kim, Hyeong-Ki	Chloride-induced corrosion of steel fiber near the surface of ultra-high performance concrete and its effect on flexural behavior with various thickness	206-213
Flores Larsen, Silvana / Hongn, Marcos / Castro, Nicolás / González, Silvina	Comparison of four in-situ methods for the determination of walls thermal resistance in free-running buildings with alternating heat flux in different seasons	455-473
Wang, Dan / Chang, Jun	Comparison on accelerated carbonation of β-C2S, Ca(OH)2, and C4AF: Reaction degree, multi-properties, and products	336-347
Sarkar, Prodip Kumar / Mitra, Nilanjan	Compressive response of tricalcium aluminate crystal: Molecular dynamics investigations	188-197
Kazemi, Mostafa / Madandoust, Rahmat / de Brito, Jorge	Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing	630-638
Kainuma, Shigenobu / Yang, Muye / Ishihara, Shuji / Kaneko, Akira / Yamauchi, Takao	Corrosion protection of steel members using an Al-Zn base sacrificial anode and fiber sheet in an atmospheric environment	880-893
Beghoura, Imed / Castro-Gomes, João	Design of alkali-activated aluminium powder foamed materials for precursors with different particle sizes	682-690
Mohammadi, Mohsen / Dai, Jian-Guo / Wu, Yu-Fei / Bai, Yu-Lei	Development of extended Drucker–Prager model for non-uniform FRP-confined concrete based on triaxial tests	1-18
Pham, Thong M. / Elchalakani, Mohamed / Hao, Hong / Lai, Jeffrey / Ameduri, Shaun / Tran, Tung M.	Durability characteristics of lightweight rubberized concrete	584-599
Valdés-Vidal, G. / Calabi-Floody, A. / Sanchez-Alonso, E. / Miró, R.	Effect of aggregate type on the fatigue durability of asphalt mixtures	124-131
Son, H. M. / Park, Solmoi / Kim, H. Y. / Seo, J. H. / Lee, H. K.	Effect of CaSO4 on hydration and phase conversion of calcium aluminate cement	40-47
Nguyen Amanjean, E. / Mouret, M. / Vidal, T.	Effect of design parameters on the properties of ultra-high performance fibre-reinforced concrete in the fresh state	1007-1017
Wang, Huakun / Yu, Yang / Yu, Jianxing / Xu, Weipeng / Chen, Haicheng / Wang, Zhaoyu / Han, Mengxue	Effect of pitting defects on the buckling strength of thick-wall cylinder under axial compression	226-241
Farooqi, Muhammad Usman / Ali, Majid	Effect of pre-treatment and content of wheat straw on energy absorption capability of concrete	572-583
Ziari, Hassan / Moniri, Ali / Bahri, Parastoo / Saghafi, Yasha	The effect of rejuvenators on the aging resistance of recycled asphalt mixtures	89-98
Chu, S. H. / Jiang, Y. / Kwan, A. K. H.	Effect of rigid fibres on aggregate packing	326-335
Guo, Hui / Tao, Junlin / Chen, Yu / Li, Dan / Jia, Bin / Zhai, Yue	Effect of steel and polypropylene fibers on the quasi-static and dynamic splitting tensile properties of high-strength concrete	504-514
Yang, Hu / Long, Diao / Lai, Zhenyu / He, Yuanjin / Tao, Yan / He, Xin / Wu, Jie / Lu, Zhongyuan / Lv, Shuzhen	Effects of bentonite on pore structure and permeability of cement mortar	276-283
Nguyễn, Huy Hoàng / Choi, Jeong-Il / Kim, Hyeong-Ki / Lee, Bang Yeon	Effects of the type of activator on the self-healing ability of fiber-reinforced alkali-activated slag-based composites at an early age	980-994
Devulapalli, Lekhaz / Kothandaraman, Saravanan / Sarang, Goutham	Evaluation of rejuvenator's effectiveness on the reclaimed asphalt pavement incorporated stone matrix asphalt mixtures	909-919
Wang, Susheng / Xu, Weiya / Yang, Lanlan	Experimental and elastoplastic model investigation on brittle-ductile transition and hydro-mechanical behaviors of cement mortar	19-28
Zhang, Kun / Zhao, Lun-Yang / Ni, Tao / Zhu, Qi-Zhi / Shen, Jie / Fan, Yun-Hui	Experimental investigation and multiscale modeling of reactive powder cement pastes subject to triaxial compressive stresses	242-254
Zhao, Chenjun / Yang, Jian / Wang, Xing-er / Azim, Iftikhar	Experimental investigation into the post-breakage performance of pre-cracked laminated glass plates	996-1006
Wei, Yongquan / Song, Chunyu / Chen, Bing / Ahmad, Muhammad Riaz	Experimental investigation on two new corn stalk biocomposites based on magnesium phosphate cement and ordinary Portland cement	700-710
Deyazada, M. / Vandoren, B. / Dragan, D. / Degee, H.	Experimental investigations on the resistance of masonry walls with AAC thermal break layer	474-492
Hu, Huan-Huan / Zuo, Xiao-Bao / Cui, Dong / Tang, Yu-Juan	Experimental study on leaching-abrasion behavior of concrete in flowing solution with low velocity	762-772
Feng, Wanhui / Liu, Feng / Yang, Fei / Li, Lijuan / Jing, Lin / Chen, Baiyu / Yuan, Bing	Experimental study on the effect of strain rates on the dynamic flexural properties of rubber concrete	408-419
Zheng, Qiangqiang / Cheng, Yunhai / Zong, Qi / Xu, Ying / Li, Fenghui / Chen, Peiyuan	Failure mechanism of different types of shotcrete based on modified Weibull distribution model	306-316
Fares, Galal / Albaroud, Mahmoud Hamad / Khan, M. Iqbal	Fine limestone dust from ornamental stone factories: A potential filler for a high-performance cementitious matrix	428-438
Schankoski, Rudiele Aparecida / Pilar, Ronaldo / de Matos, Paulo Ricardo / Prudêncio, Luiz Roberto / Ferron, Raissa Douglas	Fresh and hardened properties of self-compacting concretes produced with diabase and gneiss quarry by-product powders as alternative fillers	659-670
Wu, Yanguang / Lu, Bowen / Bai, Tao / Wang, Hao / Du, Feipeng / Zhang, Yunfei / Cai, Lu / Jiang, Can / Wang, Wenjun	Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges	930-949
Hosseini, Ehsan / Zakertabrizi, Mohammad / Habibnejad korayem, Asghar / Chen, Shujian / Kazemi Mohsenabadi, Saeed	Graphene oxide in ceramic-based layered structure: Nanosheet optimization	266-275
Du, Hongjian / Pang, Sze Dai	High performance cement composites with colloidal nano-silica	317-325
Huang, Guangping / Pudasainee, Deepak / Gupta, Rajender / Liu, Wei Victor	Hydration reaction and strength development of calcium sulfoaluminate cement-based mortar cured at cold temperatures	493-503
Zhang, Kechang / Wang, Fazhou / Rao, Meijuan / Zhang, Wenqin / Huang, Xiao	Influence of ZnO-doping on the properties of high-ferrite cement clinker	551-559
Ren, Darui / Liu, Baoguo / Sun, Jinglai / Song, Yu / Lin, Zhengjie / Liu, Bokai	Interevent acoustic emission character of three-point-bending tests on concrete beams by the nearest neighbor distance	359-371
Noroozi, Reza / Shafabakhsh, GholamAli / Kheyroddin, Ali / Mohammadzadeh Moghaddam, Abolfazl	Investigating the effects of recycled PET particles, shredded recycled steel fibers and Metakaolin powder on the properties of RCCP	173-187
Fan, Taotao / Wang, Xiushan / Gao, Yang / Zhang, Xiaoyuan	Investigating the interaction mechanism and effect of different calcium sulfate whiskers on performance of asphalt binder	515-533
Li, Shucai / Zhang, Jian / Li, Zhaofeng / Gao, Yifan / Qi, Yanhai / Li, Haiyan / Zhang, Qingsong	Investigation and practical application of a new cementitious anti-washout grouting material	66-77
Yang, Haijing / Plank, Johann / Sun, Zhenping	Investigation on the optimal chemical structure of methacrylate ester based polycarboxylate superplasticizers to be used as cement grinding aid under laboratory conditions: Effect of anionicity, side chain length and dosage on grinding efficiency, mortar	1018-1025
Gao, Junfeng / Wang, Hainian / Chen, Jiakang / Meng, Xianwei / You, Zhanping	Laboratory evaluation on comprehensive performance of polyurethane rubber particle mixture	29-39
Li, Jing / Shang, Min / Pan, Yuanyuan / Liu, Guoqiang / Chen, Anqi / Zhou, Jian / Zhao, Yongli	Laboratory improvement and field assessment of Volumetric design method based on multi-point Supported skeleton for asphalt mixtures (V-S method)	962-979
Li, Xiaosheng / Shui, Zhonghe / Yu, Rui / Wang, Xinpeng	Magnesium induced hydration kinetics of ultra-high performance concrete (UHPC) served in marine environment: Experiments and modelling	1056-1068
Cong, Lin / Shi, Jiachen / Wang, Tongjing / Yang, Fan / Zhu, Tiantong	A method to evaluate the segregation of compacted asphalt pavement by processing the images of paved asphalt mixture	622-629
Liu, Yinan / Guo, Limin / Wang, Weihong / Sun, Yanan / Wang, Haigang	Modifying wood veneer with silane coupling agent for decorating wood fiber/high-density polyethylene composite	691-699
Hou, Dongshuai / Xu, Xiaoqian / Ge, Yiming / Wang, Pan / Chen, Jizhou / Zhang, Jinrui	Molecular structure, dynamics and adsorption behavior of water molecules and ions on [0 1 0] surface of γ-FeOOH: A molecular dynamics approach	785-795
Challansonnex, A. / Casalinho, J. / Perré, P.	Non-Fickian diffusion in biosourced materials: Experimental determination of the memory function using minute samples	560-571
Fakhri, Hamidreza / Ragalwar, Ketan A. / Ranade, Ravi	On the use of Strain-Hardening Cementitious Composite covers to mitigate corrosion in reinforced concrete structures	850-862
Kristombu Baduge, Shanaka / Mendis, Priyan / San Nicolas, Rackel / Nguyen, Kate / Hajimohammadi, Ailar	Performance of lightweight hemp concrete with alkali-activated cenosphere binders exposed to elevated temperature	158-172
Saillio, Mickael / Baroghel-Bouny, Véronique / Bertin, Matthieu / Pradelle, Sylvain / Vincent, Julien	Phase assemblage of cement pastes with SCM at different ages	144-157
Chidiac, S. E. / Shafikhani, M.	Phenomenological model for quantifying concrete chloride diffusion coefficient	773-784
Arce, Carolina / Garzón, Eduardo / Sánchez-Soto, Pedro J.	Phyllite clays as raw materials replacing cement in mortars: Properties of new impermeabilizing mortars	348-358
Aragón, Guillermo / Aragón, Ángel / Santamaria, Amaia / Esteban, Alberto / Fiol, Francisco	Physical and mechanical characterization of a commercial rendering mortar using destructive and non-destructive techniques	835-849
Xu, Xu / Guo, Haoyan / Wang, XiaoFeng / Zhang, Mingxiang / Wang, Zhenjun / Yang, Bo	Physical properties and anti-aging characteristics of asphalt modified with nano-zinc oxide powder	732-742
Zhang, Yi / Wang, Kehan / Tao, Wen / Li, Dongxu	Preparation of microencapsulated phase change materials used graphene oxide to improve thermal stability and its incorporation in gypsum materials	48-56
Siddika, Ayesha / Mamun, Md. Abdullah Al / Alyousef, Rayed / Amran, Y. H. Mugahed / Aslani, Farhad / Alabduljabbar, Hisham	Properties and utilizations of waste tire rubber in concrete: A review	711-731
Oluwaseun Azeez, Mukhtar / Ahmad, Shamsad / Al-Dulaijan, Salah U. / Maslehuddin, Mohammed / Abbas Naqvi, Akhtar	Radiation shielding performance of heavy-weight concrete mixtures	284-291
James, Amala / Bazarchi, Ehsan / Chiniforush, Alireza A. / Panjebashi Aghdam, Parinaz / Hosseini, M. Reza / Akbarnezhad, Ali / Martek, Igor / Ghodoosi, Farzad	Rebar corrosion detection, protection, and rehabilitation of reinforced concrete structures in coastal environments: A review	1026-1039
Li, Ming / Gu, Shiyu / Li, Yue / Xie, Dongbo / Ou, Hongjuan / Guo, Xiaoyang	Research on the influence of sodium fatty alcohol polyoxyethylene ether sulfate on the microstructure and properties of Portland cement	214-225
Tsangouri, Eleni / Aggelis, Dimitrios G.	A review of acoustic emission as indicator of reinforcement effectiveness in concrete and cementitious composites	198-205
Zhang, Huyuan / Tan, Yu / Zhu, Fei / He, Dongjin / Zhu, Jianghong	Shrinkage property of bentonite-sand mixtures as influenced by sand content and water salinity	78-88
Su, Jun-Feng / Guo, Yan-Dong / Xie, Xin-Ming / Zhang, Xiao-Long / Mu, Ru / Wang, Ying-Yuan / Tan, Yi-qiu	Smart bituminous material combining anti-icing and self-healing functions using electrothermal graphene microcapsules containing oily rejuvenator	671-681
Mohamed, R. N. / Zamri, N. F. / Elliott, K. S. / Rahman, A. B. A. / Bakhary, N.	Steel fibre self-compacting concrete under biaxial loading	255-265
Rafiee, Roham / Sharifi, Parsa	Stochastic failure analysis of composite pipes subjected to random excitation	950-961
Gupta, Nikita / Siddique, Rafat	Strength and micro-structural properties of self-compacting concrete incorporating copper slag	894-908
Tang, Z. / Shan, B. / Li, W. G. / Peng, Q. / Xiao, Y.	Structural behavior of glubam I-joists	292-305
Pan, Gang / Li, Pengcheng / Chen, Lianjun / Liu, Guoming	A study of the effect of rheological properties of fresh concrete on shotcrete-rebound based on different additive components	1069-1080
Du, Hao / Hu, Xiamin / Xie, Zhong / Wang, Hanchen	Study on shear behavior of inclined cross lag screws for glulam-concrete composite beams	132-143
Zhang, Yanrong / Wu, Kai / Gao, Liang / Yan, Shang / Cai, Xiaopei	Study on the interlayer debonding and its effects on the mechanical properties of CRTS II slab track based on viscoelastic theory	387-407
Singh, Dharamveer / Showkat, Burhan / Sawant, Dheeraj	A study to compare virgin and target asphalt binder obtained from various RAP blending charts	109-123
Aparicio Secanellas, S. / Hernández, M. G. / Segura, I. / Morata, M. / Anaya, J. J.	A system designed to monitor in-situ the curing process of sprayed concrete	823-834
Demircilioğlu, Erman / Teomete, Egemen / Schlangen, Erik / Baeza, F. Javier	Temperature and moisture effects on electrical resistance and strain sensitivity of smart concrete	420-427
Muñoz, P. / Mendívil, M. A. / Letelier, V. / Morales, M. P.	Thermal and mechanical properties of fired clay bricks made by using grapevine shoots as pore forming agent. Influence of particle size and percentage of replacement	639-658
Lu, Wei / Duan, Qiangling / Chen, Haodong / Li, Huang / Liu, Yujun / Wang, Qingsong / Sun, Jinhua	Thermal response and resistance optimization of various types of point-supported glass facades	610-621
Stelzner, Ludwig / Powierza, Bartosz / Oesch, Tyler / Dlugosch, Raphael / Weise, Frank	Thermally-induced moisture transport in high-performance concrete studied by X-ray-CT and 1H-NMR	600-609
Yaras, Ali / Sutcu, Mucahit / Gencel, Osman / Erdogmus, Ertugrul	Use of carbonation sludge in clay based building materials processing for eco-friendly, lightweight and thermal insulation	57-65
Walubita, Lubinda F. / Faruk, Abu N. M. / Fuentes, Luis / Prakoso, Adrianus / Dessouky, Samer / Naik, Bhaven / Nyamuhokya, Tito	Using the Simple Punching Shear Test (SPST) for evaluating the HMA shear properties and predicting field rutting performance	920-929
Ruiz-Sánchez, A. / Sánchez-Polo, M. / Rozalen, M.	Waste marble dust: An interesting residue to produce cement	99-108
Cortês, Andreia / Almeida, João / de Brito, Jorge / Tadeu, António	Water retention and drainage capability of expanded cork agglomerate boards intended for application in green vertical systems	439-446
Chiniforush, A. A. / Valipour, H. / Akbarnezhad, A.	Water vapor diffusivity of engineered wood: Effect of temperature and moisture content	1040-1055

About this
data sheet
IssueID
31153
Published on:
04/08/2019
Last updated on:
04/08/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.