Construction and Building Materials - November 2019

Erschienen:	November 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Kruger, Jacques / Zeranka, Stephan / van Zijl, Gideon	An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete	372-386
Zhu, Lin / Dang, Faning / Xue, Yi / Ding, Weihua / Zhang, Le	Analysis of micro-structural damage evolution of concrete through coupled X-ray computed tomography and gray-level co-occurrence matrices method	534-550
Jing, Lei / Yin, Shi-ping / Duan, Ke	Analysis of the interface bond property between the concrete and steel bar under textile reinforced concrete confinement	447-454
Zhang, Jiaguang / Zhao, Cheng / Zhou, Aijuan / Yang, Chao / Zhao, Lin / Li, Zhu	Aragonite formation induced by open cultures of microbial consortia to heal cracks in concrete: Insights into healing mechanisms and crystal polymorphs	815-822
Achara, Bitrus Emmanuel / Mohammed, Bashar S. / Liew, M. S.	Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology	796-814
Yoo, Doo-Yeol / Choi, Hong-Joon / Kim, Soonho	Bond-slip response of novel half-hooked steel fibers in ultra-high-performance concrete	743-761
Asad, Mohammad / Dhanasekar, Manicka / Zahra, Tatheer / Thambiratnam, David	Characterisation of polymer cement mortar composites containing carbon fibre or auxetic fabric overlays and inserts under flexure	863-879
Pyo, Sukhoon / Koh, Taehoon / Tafesse, Million / Kim, Hyeong-Ki	Chloride-induced corrosion of steel fiber near the surface of ultra-high performance concrete and its effect on flexural behavior with various thickness	206-213
Flores Larsen, Silvana / Hongn, Marcos / Castro, Nicolás / González, Silvina	Comparison of four in-situ methods for the determination of walls thermal resistance in free-running buildings with alternating heat flux in different seasons	455-473
Wang, Dan / Chang, Jun	Comparison on accelerated carbonation of β-C2S, Ca(OH)2, and C4AF: Reaction degree, multi-properties, and products	336-347
Sarkar, Prodip Kumar / Mitra, Nilanjan	Compressive response of tricalcium aluminate crystal: Molecular dynamics investigations	188-197
Kazemi, Mostafa / Madandoust, Rahmat / de Brito, Jorge	Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing	630-638
Kainuma, Shigenobu / Yang, Muye / Ishihara, Shuji / Kaneko, Akira / Yamauchi, Takao	Corrosion protection of steel members using an Al-Zn base sacrificial anode and fiber sheet in an atmospheric environment	880-893
Beghoura, Imed / Castro-Gomes, João	Design of alkali-activated aluminium powder foamed materials for precursors with different particle sizes	682-690
Mohammadi, Mohsen / Dai, Jian-Guo / Wu, Yu-Fei / Bai, Yu-Lei	Development of extended Drucker–Prager model for non-uniform FRP-confined concrete based on triaxial tests	1-18
Pham, Thong M. / Elchalakani, Mohamed / Hao, Hong / Lai, Jeffrey / Ameduri, Shaun / Tran, Tung M.	Durability characteristics of lightweight rubberized concrete	584-599
Valdés-Vidal, G. / Calabi-Floody, A. / Sanchez-Alonso, E. / Miró, R.	Effect of aggregate type on the fatigue durability of asphalt mixtures	124-131
Son, H. M. / Park, Solmoi / Kim, H. Y. / Seo, J. H. / Lee, H. K.	Effect of CaSO4 on hydration and phase conversion of calcium aluminate cement	40-47
Nguyen Amanjean, E. / Mouret, M. / Vidal, T.	Effect of design parameters on the properties of ultra-high performance fibre-reinforced concrete in the fresh state	1007-1017
Wang, Huakun / Yu, Yang / Yu, Jianxing / Xu, Weipeng / Chen, Haicheng / Wang, Zhaoyu / Han, Mengxue	Effect of pitting defects on the buckling strength of thick-wall cylinder under axial compression	226-241
Farooqi, Muhammad Usman / Ali, Majid	Effect of pre-treatment and content of wheat straw on energy absorption capability of concrete	572-583
Ziari, Hassan / Moniri, Ali / Bahri, Parastoo / Saghafi, Yasha	The effect of rejuvenators on the aging resistance of recycled asphalt mixtures	89-98
Chu, S. H. / Jiang, Y. / Kwan, A. K. H.	Effect of rigid fibres on aggregate packing	326-335
Guo, Hui / Tao, Junlin / Chen, Yu / Li, Dan / Jia, Bin / Zhai, Yue	Effect of steel and polypropylene fibers on the quasi-static and dynamic splitting tensile properties of high-strength concrete	504-514
Yang, Hu / Long, Diao / Lai, Zhenyu / He, Yuanjin / Tao, Yan / He, Xin / Wu, Jie / Lu, Zhongyuan / Lv, Shuzhen	Effects of bentonite on pore structure and permeability of cement mortar	276-283
Nguyễn, Huy Hoàng / Choi, Jeong-Il / Kim, Hyeong-Ki / Lee, Bang Yeon	Effects of the type of activator on the self-healing ability of fiber-reinforced alkali-activated slag-based composites at an early age	980-994
Devulapalli, Lekhaz / Kothandaraman, Saravanan / Sarang, Goutham	Evaluation of rejuvenator's effectiveness on the reclaimed asphalt pavement incorporated stone matrix asphalt mixtures	909-919
Wang, Susheng / Xu, Weiya / Yang, Lanlan	Experimental and elastoplastic model investigation on brittle-ductile transition and hydro-mechanical behaviors of cement mortar	19-28
Zhang, Kun / Zhao, Lun-Yang / Ni, Tao / Zhu, Qi-Zhi / Shen, Jie / Fan, Yun-Hui	Experimental investigation and multiscale modeling of reactive powder cement pastes subject to triaxial compressive stresses	242-254
Zhao, Chenjun / Yang, Jian / Wang, Xing-er / Azim, Iftikhar	Experimental investigation into the post-breakage performance of pre-cracked laminated glass plates	996-1006
Wei, Yongquan / Song, Chunyu / Chen, Bing / Ahmad, Muhammad Riaz	Experimental investigation on two new corn stalk biocomposites based on magnesium phosphate cement and ordinary Portland cement	700-710
Deyazada, M. / Vandoren, B. / Dragan, D. / Degee, H.	Experimental investigations on the resistance of masonry walls with AAC thermal break layer	474-492
Hu, Huan-Huan / Zuo, Xiao-Bao / Cui, Dong / Tang, Yu-Juan	Experimental study on leaching-abrasion behavior of concrete in flowing solution with low velocity	762-772
Feng, Wanhui / Liu, Feng / Yang, Fei / Li, Lijuan / Jing, Lin / Chen, Baiyu / Yuan, Bing	Experimental study on the effect of strain rates on the dynamic flexural properties of rubber concrete	408-419
Zheng, Qiangqiang / Cheng, Yunhai / Zong, Qi / Xu, Ying / Li, Fenghui / Chen, Peiyuan	Failure mechanism of different types of shotcrete based on modified Weibull distribution model	306-316
Fares, Galal / Albaroud, Mahmoud Hamad / Khan, M. Iqbal	Fine limestone dust from ornamental stone factories: A potential filler for a high-performance cementitious matrix	428-438
Schankoski, Rudiele Aparecida / Pilar, Ronaldo / de Matos, Paulo Ricardo / Prudêncio, Luiz Roberto / Ferron, Raissa Douglas	Fresh and hardened properties of self-compacting concretes produced with diabase and gneiss quarry by-product powders as alternative fillers	659-670
Wu, Yanguang / Lu, Bowen / Bai, Tao / Wang, Hao / Du, Feipeng / Zhang, Yunfei / Cai, Lu / Jiang, Can / Wang, Wenjun	Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges	930-949
Hosseini, Ehsan / Zakertabrizi, Mohammad / Habibnejad korayem, Asghar / Chen, Shujian / Kazemi Mohsenabadi, Saeed	Graphene oxide in ceramic-based layered structure: Nanosheet optimization	266-275
Du, Hongjian / Pang, Sze Dai	High performance cement composites with colloidal nano-silica	317-325
Huang, Guangping / Pudasainee, Deepak / Gupta, Rajender / Liu, Wei Victor	Hydration reaction and strength development of calcium sulfoaluminate cement-based mortar cured at cold temperatures	493-503
Zhang, Kechang / Wang, Fazhou / Rao, Meijuan / Zhang, Wenqin / Huang, Xiao	Influence of ZnO-doping on the properties of high-ferrite cement clinker	551-559
Ren, Darui / Liu, Baoguo / Sun, Jinglai / Song, Yu / Lin, Zhengjie / Liu, Bokai	Interevent acoustic emission character of three-point-bending tests on concrete beams by the nearest neighbor distance	359-371
Noroozi, Reza / Shafabakhsh, GholamAli / Kheyroddin, Ali / Mohammadzadeh Moghaddam, Abolfazl	Investigating the effects of recycled PET particles, shredded recycled steel fibers and Metakaolin powder on the properties of RCCP	173-187
Fan, Taotao / Wang, Xiushan / Gao, Yang / Zhang, Xiaoyuan	Investigating the interaction mechanism and effect of different calcium sulfate whiskers on performance of asphalt binder	515-533
Li, Shucai / Zhang, Jian / Li, Zhaofeng / Gao, Yifan / Qi, Yanhai / Li, Haiyan / Zhang, Qingsong	Investigation and practical application of a new cementitious anti-washout grouting material	66-77
Yang, Haijing / Plank, Johann / Sun, Zhenping	Investigation on the optimal chemical structure of methacrylate ester based polycarboxylate superplasticizers to be used as cement grinding aid under laboratory conditions: Effect of anionicity, side chain length and dosage on grinding efficiency, mortar	1018-1025
Gao, Junfeng / Wang, Hainian / Chen, Jiakang / Meng, Xianwei / You, Zhanping	Laboratory evaluation on comprehensive performance of polyurethane rubber particle mixture	29-39
Li, Jing / Shang, Min / Pan, Yuanyuan / Liu, Guoqiang / Chen, Anqi / Zhou, Jian / Zhao, Yongli	Laboratory improvement and field assessment of Volumetric design method based on multi-point Supported skeleton for asphalt mixtures (V-S method)	962-979
Li, Xiaosheng / Shui, Zhonghe / Yu, Rui / Wang, Xinpeng	Magnesium induced hydration kinetics of ultra-high performance concrete (UHPC) served in marine environment: Experiments and modelling	1056-1068
Cong, Lin / Shi, Jiachen / Wang, Tongjing / Yang, Fan / Zhu, Tiantong	A method to evaluate the segregation of compacted asphalt pavement by processing the images of paved asphalt mixture	622-629
Liu, Yinan / Guo, Limin / Wang, Weihong / Sun, Yanan / Wang, Haigang	Modifying wood veneer with silane coupling agent for decorating wood fiber/high-density polyethylene composite	691-699
Hou, Dongshuai / Xu, Xiaoqian / Ge, Yiming / Wang, Pan / Chen, Jizhou / Zhang, Jinrui	Molecular structure, dynamics and adsorption behavior of water molecules and ions on [0 1 0] surface of γ-FeOOH: A molecular dynamics approach	785-795
Challansonnex, A. / Casalinho, J. / Perré, P.	Non-Fickian diffusion in biosourced materials: Experimental determination of the memory function using minute samples	560-571
Fakhri, Hamidreza / Ragalwar, Ketan A. / Ranade, Ravi	On the use of Strain-Hardening Cementitious Composite covers to mitigate corrosion in reinforced concrete structures	850-862
Kristombu Baduge, Shanaka / Mendis, Priyan / San Nicolas, Rackel / Nguyen, Kate / Hajimohammadi, Ailar	Performance of lightweight hemp concrete with alkali-activated cenosphere binders exposed to elevated temperature	158-172
Saillio, Mickael / Baroghel-Bouny, Véronique / Bertin, Matthieu / Pradelle, Sylvain / Vincent, Julien	Phase assemblage of cement pastes with SCM at different ages	144-157
Chidiac, S. E. / Shafikhani, M.	Phenomenological model for quantifying concrete chloride diffusion coefficient	773-784
Arce, Carolina / Garzón, Eduardo / Sánchez-Soto, Pedro J.	Phyllite clays as raw materials replacing cement in mortars: Properties of new impermeabilizing mortars	348-358
Aragón, Guillermo / Aragón, Ángel / Santamaria, Amaia / Esteban, Alberto / Fiol, Francisco	Physical and mechanical characterization of a commercial rendering mortar using destructive and non-destructive techniques	835-849
Xu, Xu / Guo, Haoyan / Wang, XiaoFeng / Zhang, Mingxiang / Wang, Zhenjun / Yang, Bo	Physical properties and anti-aging characteristics of asphalt modified with nano-zinc oxide powder	732-742
Zhang, Yi / Wang, Kehan / Tao, Wen / Li, Dongxu	Preparation of microencapsulated phase change materials used graphene oxide to improve thermal stability and its incorporation in gypsum materials	48-56
Siddika, Ayesha / Mamun, Md. Abdullah Al / Alyousef, Rayed / Amran, Y. H. Mugahed / Aslani, Farhad / Alabduljabbar, Hisham	Properties and utilizations of waste tire rubber in concrete: A review	711-731
Oluwaseun Azeez, Mukhtar / Ahmad, Shamsad / Al-Dulaijan, Salah U. / Maslehuddin, Mohammed / Abbas Naqvi, Akhtar	Radiation shielding performance of heavy-weight concrete mixtures	284-291
James, Amala / Bazarchi, Ehsan / Chiniforush, Alireza A. / Panjebashi Aghdam, Parinaz / Hosseini, M. Reza / Akbarnezhad, Ali / Martek, Igor / Ghodoosi, Farzad	Rebar corrosion detection, protection, and rehabilitation of reinforced concrete structures in coastal environments: A review	1026-1039
Li, Ming / Gu, Shiyu / Li, Yue / Xie, Dongbo / Ou, Hongjuan / Guo, Xiaoyang	Research on the influence of sodium fatty alcohol polyoxyethylene ether sulfate on the microstructure and properties of Portland cement	214-225
Tsangouri, Eleni / Aggelis, Dimitrios G.	A review of acoustic emission as indicator of reinforcement effectiveness in concrete and cementitious composites	198-205
Zhang, Huyuan / Tan, Yu / Zhu, Fei / He, Dongjin / Zhu, Jianghong	Shrinkage property of bentonite-sand mixtures as influenced by sand content and water salinity	78-88
Su, Jun-Feng / Guo, Yan-Dong / Xie, Xin-Ming / Zhang, Xiao-Long / Mu, Ru / Wang, Ying-Yuan / Tan, Yi-qiu	Smart bituminous material combining anti-icing and self-healing functions using electrothermal graphene microcapsules containing oily rejuvenator	671-681
Mohamed, R. N. / Zamri, N. F. / Elliott, K. S. / Rahman, A. B. A. / Bakhary, N.	Steel fibre self-compacting concrete under biaxial loading	255-265
Rafiee, Roham / Sharifi, Parsa	Stochastic failure analysis of composite pipes subjected to random excitation	950-961
Gupta, Nikita / Siddique, Rafat	Strength and micro-structural properties of self-compacting concrete incorporating copper slag	894-908
Tang, Z. / Shan, B. / Li, W. G. / Peng, Q. / Xiao, Y.	Structural behavior of glubam I-joists	292-305
Pan, Gang / Li, Pengcheng / Chen, Lianjun / Liu, Guoming	A study of the effect of rheological properties of fresh concrete on shotcrete-rebound based on different additive components	1069-1080
Du, Hao / Hu, Xiamin / Xie, Zhong / Wang, Hanchen	Study on shear behavior of inclined cross lag screws for glulam-concrete composite beams	132-143
Zhang, Yanrong / Wu, Kai / Gao, Liang / Yan, Shang / Cai, Xiaopei	Study on the interlayer debonding and its effects on the mechanical properties of CRTS II slab track based on viscoelastic theory	387-407
Singh, Dharamveer / Showkat, Burhan / Sawant, Dheeraj	A study to compare virgin and target asphalt binder obtained from various RAP blending charts	109-123
Aparicio Secanellas, S. / Hernández, M. G. / Segura, I. / Morata, M. / Anaya, J. J.	A system designed to monitor in-situ the curing process of sprayed concrete	823-834
Demircilioğlu, Erman / Teomete, Egemen / Schlangen, Erik / Baeza, F. Javier	Temperature and moisture effects on electrical resistance and strain sensitivity of smart concrete	420-427
Muñoz, P. / Mendívil, M. A. / Letelier, V. / Morales, M. P.	Thermal and mechanical properties of fired clay bricks made by using grapevine shoots as pore forming agent. Influence of particle size and percentage of replacement	639-658
Lu, Wei / Duan, Qiangling / Chen, Haodong / Li, Huang / Liu, Yujun / Wang, Qingsong / Sun, Jinhua	Thermal response and resistance optimization of various types of point-supported glass facades	610-621
Stelzner, Ludwig / Powierza, Bartosz / Oesch, Tyler / Dlugosch, Raphael / Weise, Frank	Thermally-induced moisture transport in high-performance concrete studied by X-ray-CT and 1H-NMR	600-609
Yaras, Ali / Sutcu, Mucahit / Gencel, Osman / Erdogmus, Ertugrul	Use of carbonation sludge in clay based building materials processing for eco-friendly, lightweight and thermal insulation	57-65
Walubita, Lubinda F. / Faruk, Abu N. M. / Fuentes, Luis / Prakoso, Adrianus / Dessouky, Samer / Naik, Bhaven / Nyamuhokya, Tito	Using the Simple Punching Shear Test (SPST) for evaluating the HMA shear properties and predicting field rutting performance	920-929
Ruiz-Sánchez, A. / Sánchez-Polo, M. / Rozalen, M.	Waste marble dust: An interesting residue to produce cement	99-108
Cortês, Andreia / Almeida, João / de Brito, Jorge / Tadeu, António	Water retention and drainage capability of expanded cork agglomerate boards intended for application in green vertical systems	439-446
Chiniforush, A. A. / Valipour, H. / Akbarnezhad, A.	Water vapor diffusivity of engineered wood: Effect of temperature and moisture content	1040-1055

Über diese
Datenseite
IssueID
31153
Veröffentlicht am:
04.08.2019
Geändert am:
04.08.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - November 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - November 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.