Construction and Building Materials - October 2019

Published:	October 2019

Articles in this Issue

Author(s)	Title	Page(s)
Ma, Yuefei / Li, Shengli / Wu, Yanqi / Wang, Dongwei / Liu, Meiyu	Acoustic emission testing method for the sleeve grouting compactness of fabricated structure	800-810
Pokhara, Prafulla / Ekamparam, Aravinth S. S. / Gupta, Akhilendra B. / Rai, Durgesh C. / Singh, Abhas	Activated alumina sludge as partial substitute for fine aggregates in brick making	244-252
Kong, DeCheng / Ni, Xiaoqing / Dong, Chaofang / Zhang, Liang / Yao, Jizheng / Man, Cheng / Wang, Li / Xiao, Kui / Li, Xiaogang	Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting	720-729
Barbero-Barrera, M. Mar / Santos, António J. C. / Veiga, M. Rosário	The appearance and luminous properties of lime and gypsum pastes: A comparative analysis of different methods of measurement	562-572
Momoh, Emmanuel Owoichoechi / Osofero, Adelaja Israel	Behaviour of oil palm broom fibres (OPBF) reinforced concrete	745-761
Meimaroglou, Nikiforos / Mouzakis, Charalampos	Cation Exchange Capacity (CEC), texture, consistency and organic matter in soil assessment for earth construction: The case of earth mortars	27-39
Hren, Miha / Kosec, Tadeja / Legat, Andraž	Characterization of stainless steel corrosion processes in mortar using various monitoring techniques	604-613
Wang, Chao / Chen, Yifang / Cao, Wei	A chemo-rheological approach to the healing characteristics of asphalt binders under short- and long-term oxidative aging	553-561
Baktheer, Abedulgader / Chudoba, Rostislav	Classification and evaluation of phenomenological numerical models for concrete fatigue behavior under compression	661-677
Mora, Ernesto / González, Guillermo / Romero, Pedro / Castellón, Erick	Control of water absorption in concrete materials by modification with hybrid hydrophobic silica particles	210-218
Lahoti, Mukund / Tan, Kang Hai / Yang, En-Hua	A critical review of geopolymer properties for structural fire-resistance applications	514-526
Wang, Xiaoran / Wang, Enyuan / Liu, Xiaofei	Damage characterization of concrete under multi-step loading by integrated ultrasonic and acoustic emission techniques	678-690
Xiao, Qian Hui / Cao, Zhi Yuan / Guan, Xiao / Li, Qiang / Liu, Xiao Lin	Damage to recycled concrete with different aggregate substitution rates from the coupled action of freeze-thaw cycles and sulfate attack	74-83
Karatas, Mehmet / Benli, Ahmet / Toprak, Hasan Anil	Effect of incorporation of raw vermiculite as partial sand replacement on the properties of self-compacting mortars at elevated temperature	163-176
Wang, Xiao-hua / Zhang, She-rong / Wang, Chao / Cao, Ke-lei / Wei, Pei-yong / Wang, Jia-xin	Effect of steel fibers on the compressive and splitting-tensile behaviors of cellular concrete with millimeter-size pores	60-73
Sadrmomtazi, Ali / Noorollahi, Zahra / Tahmouresi, Behzad / Saradar, Ashkan	Effects of hauling time on self-consolidating mortars containing metakaolin and natural zeolite	283-291
Hu, Xiongyu / He, Chuan / Feng, Kun / Liu, Sijing / Walton, Gabriel	Effects of polypyrrole coated rebar on corrosion behavior of tunnel lining with the combination effect of sustained loading and pre-existing cracks when exposed to chlorides	318-331
Uthaman, Sudha / George, R. P. / Vishwakarma, Vinita / Harilal, Manu / Philip, John	Enhanced seawater corrosion resistance of reinforcement in nanophase modified fly ash concrete	232-243
Dehghanpour, Heydar / Yilmaz, Kemalettin / Ipek, Metin	Evaluation of recycled nano carbon black and waste erosion wires in electrically conductive concretes	109-121
Rashid, Khuram / Ul Haq, Ehsan / Kamran, Muhammad Sajid / Munir, Nazish / Shahid, Amber / Hanif, Iqra	Experimental and finite element analysis on thermal conductivity of burnt clay bricks reinforced with fibers	190-199
Chen, Kongyang / Qiu, Hongxing / Sun, Menglin / Lam, Frank	Experimental and numerical study of moisture distribution and shrinkage crack propagation in cross section of timber members	219-231
Torres, Benjamín / Bertolesi, Elisa / Moragues, Juan J. / Calderón, Pedro A. / Adam, José M.	Experimental investigation of a full-scale timbrel masonry cross vault subjected to vertical settlement	421-432
Mohyeddin, Alireza / Gad, Emad F. / Lee, Jessey	Failure modes and tensile strength of screw anchors in non-cracked concrete	501-513
Weng, Yiwei / Ruan, Shaoqin / Li, Mingyang / Mo, Liwu / Unluer, Cise / Tan, Ming Jen / Qian, Shunzhi	Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing	595-603
Chen, Jian-Shiuh / Yang, Chin Hung / Lee, Cheng-Te	Field evaluation of porous asphalt course for life-cycle cost analysis	20-26
Meng, Dan / Zhang, Y. X. / Lee, C. K.	Flexural fatigue behaviour of steel reinforced PVA-ECC beams	384-398
Newell, Michael / Garcia-Taengua, Emilio	Fresh and hardened state properties of hybrid graphene oxide/nanosilica cement composites	433-442
Chouhan, Harshwardhan Singh / Kalla, Pawan / Nagar, Ravindra / Gautam, Pradeep Kumar	Gainful utilization of dimensional limestone waste as fine aggregate in cement mortar mixes	363-374
Divya Rani, S. / Santhanam, Manu / Bais, Sangeeta	Historic incised plasterwork of India – Characteristics and microstructure	253-262
Zeng, Kun / Qiu, Tong / Bian, Xuecheng / Xiao, Ming / Huang, Hai	Identification of ballast condition using SmartRock and pattern recognition	50-59
Nayak, Ramesh Kumar	Influence of seawater aging on mechanical properties of nano-Al2O3 embedded glass fiber reinforced polymer nanocomposites	12-19
Quinteros-Mayne, R. / de Arteaga, I. / Goñi-Lasheras, R. / Villarino, A. / Villarino, J. I.	The influence of the elastic modulus on the finite element structural analysis of masonry arches	614-626
Xu, Mingfeng / Bao, Yi / Wu, Kai / Xia, Tian / Clack, Herek L. / Shi, Huisheng / Li, Victor C.	Influence of TiO2 incorporation methods on NOx abatement in Engineered Cementitious Composites	375-383
Taglieri, G. / Daniele, V. / Macera, L. / Mignemi, A.	Innovative and green nanolime treatment tailored to consolidate the original mortar of the façade of a medieval building in L'aquila (Italy)	643-650
Xi, Xun / Yang, Shangtong	Investigating the spatial development of corrosion of corner-located steel bar in concrete by X-ray computed tomography	177-189
Ding, Yongjie / Deng, Mei / Cao, Xuejuan / Yu, Miao / Tang, Boming	Investigation of mixing effect and molecular aggregation between virgin and aged asphalt	301-307
Tian, Ye / Chen, Changchang / Jin, Nanguo / Jin, Xianyu / Tian, Zushi / Yan, Dongming / Yu, Wei	An investigation on the three-dimensional transport of chloride ions in concrete based on X-ray computed tomography technology	443-455
Jing, Guoqing / Zhang, Xu / Jia, Wenli	Lateral resistance of polyurethane-reinforced ballast with the application of new bonding schemes: Laboratory tests and discrete element simulations	627-636
Xu, Dong-Sheng / Tang, Jian-Yi / Zou, Yan / Rui, Rui / Liu, Hua-Bei	Macro and micro investigation of gravel content on simple shear behavior of sand-gravel mixture	730-744
Hussein, Ahmed / Lipo, Blerta / Dal Pont, Stefano / Brocato, Maurizio	Mechanical characterization of Hyposand: A new material of sand solidified by sodium thiosulphate salt	479-490
Liu, Changjiang / Deng, Xiaowei / Liu, Jian / Hui, David	Mechanical properties and microstructures of hypergolic and calcined coal gangue based geopolymer recycled concrete	691-708
Wang, Meng / Xie, Youjun / Long, Guangcheng / Ma, Cong / Zeng, Xiaohui	Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes	151-162
Peng, Hui / Cui, Chao / Cai, C. S. / Liu, Yang / Liu, Zhen	Microstructure and microhardness property of the interface between a metakaolin/GGBFS-based geopolymer paste and granite aggregate	263-273
Pradipta, Ivan / Kong, Daniel / Tan, Joash Ban Lee	Natural organic antioxidants from green tea form a protective layer to inhibit corrosion of steel reinforcing bars embedded in mortar	351-362
Liu, Zhang-Rong / Ye, Wei-min / Zhang, Zhao / Wang, Qiong / Chen, Yong-Gui / Cui, Yu-Jun	A nonlinear particle packing model for multi-sized granular soils	274-282
Zhu, Huajun / Liang, Guangwei / Zhang, Zuhua / Wu, Qisheng / Du, Jianzhou	Partial replacement of metakaolin with thermally treated rice husk ash in metakaolin-based geopolymer	527-538
Jain, Abhishek / Gupta, Rajesh / Chaudhary, Sandeep	Performance of self-compacting concrete comprising granite cutting waste as fine aggregate	539-552
Mistri, Abhijit / Bhattacharyya, Sriman Kumar / Dhami, Navdeep / Mukherjee, Abhijit / Barai, Sudhirkumar V.	Petrographic investigation on recycled coarse aggregate and identification the reason behind the inferior performance	399-408
Raj, Amritha / Sathyan, Dhanya / Mini, K. M.	Physical and functional characteristics of foam concrete: A review	787-799
Moghadam, Mohamad Jamali / Ajalloeian, Rassoul / Hajiannia, Alborz	Preparation and application of alkali-activated materials based on waste glass and coal gangue: A review	84-98
Yang, Zhaotong / Mocadlo, Ryan / Zhao, Mengxuan / Sisson, Richard D. / Tao, Mingjiang / Liang, Jianyu	Preparation of a geopolymer from red mud slurry and class F fly ash and its behavior at elevated temperatures	308-317
Majd, Mehdi Tabatabaei / Shahrabi, Taghi / Ramezanzadeh, Bahram	Production of an eco-friendly anti-corrosion ceramic base nanostructured hybrid-film based on Nd (III)-C7H6N2 on the mild steel surface; Electrochemical and surface studies	456-468
Liu, Jianxing / Xiao, Jieling / Liu, Hao / Liu, Ganzhong / Wang, Ping / Lin, Yuke	Random generation method of ballast 2D topology based on particle characteristics	762-771
Prasanphan, Sitthisak / Wannagon, Anucha / Kobayashi, Takaomi / Jiemsirilers, Sirithan	Reaction mechanisms of calcined kaolin processing waste-based geopolymers in the presence of low alkali activator solution	409-420
Lemougna, Patrick N. / Yliniemi, Juho / Ismailov, Arnold / Levanen, Erkki / Tanskanen, Pekka / Kinnunen, Paivo / Röning, Juha / Illikainen, Mirja	Recycling lithium mine tailings in the production of low temperature (700–900 °C) ceramics: Effect of ladle slag and sodium compounds on the processing and final properties	332-344
Sha, Fei / Lin, Chunjin / Li, Zhaofeng / Liu, Rentai	Reinforcement simulation of water-rich and broken rock with Portland cement-based grout	292-300
Kaya, Derya / Topal, Ali / McNally, Tony	Relationship between processing parameters and aging with the rheological behaviour of SBS modified bitumen	345-350
Abo-Zaid, Laila / Hassan, Ahmed / Abdel-Hafez, L. M.	Repairing post-heated L-shaped RC columns with advanced thin concrete jacketing	573-585
Yang, Jian-hong / Fang, Huai-ying	Research into different methods for measuring the particle-size distribution of aggregates: An experimental comparison	469-478
Antunes, Ana / Faria, Paulina / Silva, Vitor / Brás, Ana	Rice husk-earth based composites: A novel bio-based panel for buildings refurbishment	99-108
Kanniyapan, Gunavathy / Nesan, Lenin Jawahar / Mohammad, Izran Sarrazin / Tan, Say Keat / Ponniah, Vignes	Selection criteria of building material for optimising maintainability	651-660
Fayed, Sabry / Basha, Ali / Hamoda, Ahmed	Shear strengthening of RC beams using aluminum plates: An experimental work	122-138
Liu, Yuyi / Chang, Che-Way / Namdar, Abdoullah / She, Yuexin / Lin, Chen-Hua / Yuan, Xiang / Yang, Qin	Stabilization of expansive soil using cementing material from rice husk ash and calcium carbide residue	1-11
Lu, Zichen / Merkl, Jan-Philip / Schmidtke, Christian / Pulkin, Maxim / Deschner, Florian / Wache, Steffen / Jin, Yu / Stephan, Dietmar	A systematic study on polymer modified alkali-activated slag – Part I: Stability analysis of colloidal polymer dispersion in sodium water glass	40-49
Hu, Ji-hong / Sun, Ming-qing / Li, Jun / Wei, Yun-pang / Chen, Jian-zhong	Tensile characteristics of strain-hardening cement-based composites with different curing ages	709-719
Guardia, Cynthia / Barluenga, Gonzalo / Palomar, Irene / Diarce, Gonzalo	Thermal enhanced cement-lime mortars with phase change materials (PCM), lightweight aggregate and cellulose fibers	586-594
Tian, Yu-xiang / Ma, Biao / Liu, Feng-wei / Li, Ning / Zhou, Xue-yan	Thermoregulation effect analysis of microencapsulated phase change thermoregulation agent for asphalt pavement	139-150
Blaauw, Sheldon A. / Maina, James W. / Horak, Emile	Towards a mix design model for the prediction of permeability of hot-mix asphalt	637-642
Mahdikhani, Mahdi / Khanban, MohamadReza	Utilization of industrial waste residue containing heavy metals as a substitute for fine aggregates	772-786
Perera, Sahan / Arulrajah, Arul / Wong, Yat Choy / Horpibulsuk, Suksun / Maghool, Farshid	Utilizing recycled PET blends with demolition wastes as construction materials	200-209
Cho, Byoung Hooi / Nam, Boo Hyun / Seo, Sangyeon / Kim, Jungil / An, Jinwoo / Youn, Heejung	Waterproofing performance of waterstop with adhesive bonding used at joints of underground concrete structures	491-500

About this
data sheet
IssueID
28455
Published on:
24/06/2019
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.