Construction and Building Materials - Oktober 2019

Erschienen:	Oktober 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Ma, Yuefei / Li, Shengli / Wu, Yanqi / Wang, Dongwei / Liu, Meiyu	Acoustic emission testing method for the sleeve grouting compactness of fabricated structure	800-810
Pokhara, Prafulla / Ekamparam, Aravinth S. S. / Gupta, Akhilendra B. / Rai, Durgesh C. / Singh, Abhas	Activated alumina sludge as partial substitute for fine aggregates in brick making	244-252
Kong, DeCheng / Ni, Xiaoqing / Dong, Chaofang / Zhang, Liang / Yao, Jizheng / Man, Cheng / Wang, Li / Xiao, Kui / Li, Xiaogang	Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting	720-729
Barbero-Barrera, M. Mar / Santos, António J. C. / Veiga, M. Rosário	The appearance and luminous properties of lime and gypsum pastes: A comparative analysis of different methods of measurement	562-572
Momoh, Emmanuel Owoichoechi / Osofero, Adelaja Israel	Behaviour of oil palm broom fibres (OPBF) reinforced concrete	745-761
Meimaroglou, Nikiforos / Mouzakis, Charalampos	Cation Exchange Capacity (CEC), texture, consistency and organic matter in soil assessment for earth construction: The case of earth mortars	27-39
Hren, Miha / Kosec, Tadeja / Legat, Andraž	Characterization of stainless steel corrosion processes in mortar using various monitoring techniques	604-613
Wang, Chao / Chen, Yifang / Cao, Wei	A chemo-rheological approach to the healing characteristics of asphalt binders under short- and long-term oxidative aging	553-561
Baktheer, Abedulgader / Chudoba, Rostislav	Classification and evaluation of phenomenological numerical models for concrete fatigue behavior under compression	661-677
Mora, Ernesto / González, Guillermo / Romero, Pedro / Castellón, Erick	Control of water absorption in concrete materials by modification with hybrid hydrophobic silica particles	210-218
Lahoti, Mukund / Tan, Kang Hai / Yang, En-Hua	A critical review of geopolymer properties for structural fire-resistance applications	514-526
Wang, Xiaoran / Wang, Enyuan / Liu, Xiaofei	Damage characterization of concrete under multi-step loading by integrated ultrasonic and acoustic emission techniques	678-690
Xiao, Qian Hui / Cao, Zhi Yuan / Guan, Xiao / Li, Qiang / Liu, Xiao Lin	Damage to recycled concrete with different aggregate substitution rates from the coupled action of freeze-thaw cycles and sulfate attack	74-83
Karatas, Mehmet / Benli, Ahmet / Toprak, Hasan Anil	Effect of incorporation of raw vermiculite as partial sand replacement on the properties of self-compacting mortars at elevated temperature	163-176
Wang, Xiao-hua / Zhang, She-rong / Wang, Chao / Cao, Ke-lei / Wei, Pei-yong / Wang, Jia-xin	Effect of steel fibers on the compressive and splitting-tensile behaviors of cellular concrete with millimeter-size pores	60-73
Sadrmomtazi, Ali / Noorollahi, Zahra / Tahmouresi, Behzad / Saradar, Ashkan	Effects of hauling time on self-consolidating mortars containing metakaolin and natural zeolite	283-291
Hu, Xiongyu / He, Chuan / Feng, Kun / Liu, Sijing / Walton, Gabriel	Effects of polypyrrole coated rebar on corrosion behavior of tunnel lining with the combination effect of sustained loading and pre-existing cracks when exposed to chlorides	318-331
Uthaman, Sudha / George, R. P. / Vishwakarma, Vinita / Harilal, Manu / Philip, John	Enhanced seawater corrosion resistance of reinforcement in nanophase modified fly ash concrete	232-243
Dehghanpour, Heydar / Yilmaz, Kemalettin / Ipek, Metin	Evaluation of recycled nano carbon black and waste erosion wires in electrically conductive concretes	109-121
Rashid, Khuram / Ul Haq, Ehsan / Kamran, Muhammad Sajid / Munir, Nazish / Shahid, Amber / Hanif, Iqra	Experimental and finite element analysis on thermal conductivity of burnt clay bricks reinforced with fibers	190-199
Chen, Kongyang / Qiu, Hongxing / Sun, Menglin / Lam, Frank	Experimental and numerical study of moisture distribution and shrinkage crack propagation in cross section of timber members	219-231
Torres, Benjamín / Bertolesi, Elisa / Moragues, Juan J. / Calderón, Pedro A. / Adam, José M.	Experimental investigation of a full-scale timbrel masonry cross vault subjected to vertical settlement	421-432
Mohyeddin, Alireza / Gad, Emad F. / Lee, Jessey	Failure modes and tensile strength of screw anchors in non-cracked concrete	501-513
Weng, Yiwei / Ruan, Shaoqin / Li, Mingyang / Mo, Liwu / Unluer, Cise / Tan, Ming Jen / Qian, Shunzhi	Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing	595-603
Chen, Jian-Shiuh / Yang, Chin Hung / Lee, Cheng-Te	Field evaluation of porous asphalt course for life-cycle cost analysis	20-26
Meng, Dan / Zhang, Y. X. / Lee, C. K.	Flexural fatigue behaviour of steel reinforced PVA-ECC beams	384-398
Newell, Michael / Garcia-Taengua, Emilio	Fresh and hardened state properties of hybrid graphene oxide/nanosilica cement composites	433-442
Chouhan, Harshwardhan Singh / Kalla, Pawan / Nagar, Ravindra / Gautam, Pradeep Kumar	Gainful utilization of dimensional limestone waste as fine aggregate in cement mortar mixes	363-374
Divya Rani, S. / Santhanam, Manu / Bais, Sangeeta	Historic incised plasterwork of India – Characteristics and microstructure	253-262
Zeng, Kun / Qiu, Tong / Bian, Xuecheng / Xiao, Ming / Huang, Hai	Identification of ballast condition using SmartRock and pattern recognition	50-59
Nayak, Ramesh Kumar	Influence of seawater aging on mechanical properties of nano-Al2O3 embedded glass fiber reinforced polymer nanocomposites	12-19
Quinteros-Mayne, R. / de Arteaga, I. / Goñi-Lasheras, R. / Villarino, A. / Villarino, J. I.	The influence of the elastic modulus on the finite element structural analysis of masonry arches	614-626
Xu, Mingfeng / Bao, Yi / Wu, Kai / Xia, Tian / Clack, Herek L. / Shi, Huisheng / Li, Victor C.	Influence of TiO2 incorporation methods on NOx abatement in Engineered Cementitious Composites	375-383
Taglieri, G. / Daniele, V. / Macera, L. / Mignemi, A.	Innovative and green nanolime treatment tailored to consolidate the original mortar of the façade of a medieval building in L'aquila (Italy)	643-650
Xi, Xun / Yang, Shangtong	Investigating the spatial development of corrosion of corner-located steel bar in concrete by X-ray computed tomography	177-189
Ding, Yongjie / Deng, Mei / Cao, Xuejuan / Yu, Miao / Tang, Boming	Investigation of mixing effect and molecular aggregation between virgin and aged asphalt	301-307
Tian, Ye / Chen, Changchang / Jin, Nanguo / Jin, Xianyu / Tian, Zushi / Yan, Dongming / Yu, Wei	An investigation on the three-dimensional transport of chloride ions in concrete based on X-ray computed tomography technology	443-455
Jing, Guoqing / Zhang, Xu / Jia, Wenli	Lateral resistance of polyurethane-reinforced ballast with the application of new bonding schemes: Laboratory tests and discrete element simulations	627-636
Xu, Dong-Sheng / Tang, Jian-Yi / Zou, Yan / Rui, Rui / Liu, Hua-Bei	Macro and micro investigation of gravel content on simple shear behavior of sand-gravel mixture	730-744
Hussein, Ahmed / Lipo, Blerta / Dal Pont, Stefano / Brocato, Maurizio	Mechanical characterization of Hyposand: A new material of sand solidified by sodium thiosulphate salt	479-490
Liu, Changjiang / Deng, Xiaowei / Liu, Jian / Hui, David	Mechanical properties and microstructures of hypergolic and calcined coal gangue based geopolymer recycled concrete	691-708
Wang, Meng / Xie, Youjun / Long, Guangcheng / Ma, Cong / Zeng, Xiaohui	Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes	151-162
Peng, Hui / Cui, Chao / Cai, C. S. / Liu, Yang / Liu, Zhen	Microstructure and microhardness property of the interface between a metakaolin/GGBFS-based geopolymer paste and granite aggregate	263-273
Pradipta, Ivan / Kong, Daniel / Tan, Joash Ban Lee	Natural organic antioxidants from green tea form a protective layer to inhibit corrosion of steel reinforcing bars embedded in mortar	351-362
Liu, Zhang-Rong / Ye, Wei-min / Zhang, Zhao / Wang, Qiong / Chen, Yong-Gui / Cui, Yu-Jun	A nonlinear particle packing model for multi-sized granular soils	274-282
Zhu, Huajun / Liang, Guangwei / Zhang, Zuhua / Wu, Qisheng / Du, Jianzhou	Partial replacement of metakaolin with thermally treated rice husk ash in metakaolin-based geopolymer	527-538
Jain, Abhishek / Gupta, Rajesh / Chaudhary, Sandeep	Performance of self-compacting concrete comprising granite cutting waste as fine aggregate	539-552
Mistri, Abhijit / Bhattacharyya, Sriman Kumar / Dhami, Navdeep / Mukherjee, Abhijit / Barai, Sudhirkumar V.	Petrographic investigation on recycled coarse aggregate and identification the reason behind the inferior performance	399-408
Raj, Amritha / Sathyan, Dhanya / Mini, K. M.	Physical and functional characteristics of foam concrete: A review	787-799
Moghadam, Mohamad Jamali / Ajalloeian, Rassoul / Hajiannia, Alborz	Preparation and application of alkali-activated materials based on waste glass and coal gangue: A review	84-98
Yang, Zhaotong / Mocadlo, Ryan / Zhao, Mengxuan / Sisson, Richard D. / Tao, Mingjiang / Liang, Jianyu	Preparation of a geopolymer from red mud slurry and class F fly ash and its behavior at elevated temperatures	308-317
Majd, Mehdi Tabatabaei / Shahrabi, Taghi / Ramezanzadeh, Bahram	Production of an eco-friendly anti-corrosion ceramic base nanostructured hybrid-film based on Nd (III)-C7H6N2 on the mild steel surface; Electrochemical and surface studies	456-468
Liu, Jianxing / Xiao, Jieling / Liu, Hao / Liu, Ganzhong / Wang, Ping / Lin, Yuke	Random generation method of ballast 2D topology based on particle characteristics	762-771
Prasanphan, Sitthisak / Wannagon, Anucha / Kobayashi, Takaomi / Jiemsirilers, Sirithan	Reaction mechanisms of calcined kaolin processing waste-based geopolymers in the presence of low alkali activator solution	409-420
Lemougna, Patrick N. / Yliniemi, Juho / Ismailov, Arnold / Levanen, Erkki / Tanskanen, Pekka / Kinnunen, Paivo / Röning, Juha / Illikainen, Mirja	Recycling lithium mine tailings in the production of low temperature (700–900 °C) ceramics: Effect of ladle slag and sodium compounds on the processing and final properties	332-344
Sha, Fei / Lin, Chunjin / Li, Zhaofeng / Liu, Rentai	Reinforcement simulation of water-rich and broken rock with Portland cement-based grout	292-300
Kaya, Derya / Topal, Ali / McNally, Tony	Relationship between processing parameters and aging with the rheological behaviour of SBS modified bitumen	345-350
Abo-Zaid, Laila / Hassan, Ahmed / Abdel-Hafez, L. M.	Repairing post-heated L-shaped RC columns with advanced thin concrete jacketing	573-585
Yang, Jian-hong / Fang, Huai-ying	Research into different methods for measuring the particle-size distribution of aggregates: An experimental comparison	469-478
Antunes, Ana / Faria, Paulina / Silva, Vitor / Brás, Ana	Rice husk-earth based composites: A novel bio-based panel for buildings refurbishment	99-108
Kanniyapan, Gunavathy / Nesan, Lenin Jawahar / Mohammad, Izran Sarrazin / Tan, Say Keat / Ponniah, Vignes	Selection criteria of building material for optimising maintainability	651-660
Fayed, Sabry / Basha, Ali / Hamoda, Ahmed	Shear strengthening of RC beams using aluminum plates: An experimental work	122-138
Liu, Yuyi / Chang, Che-Way / Namdar, Abdoullah / She, Yuexin / Lin, Chen-Hua / Yuan, Xiang / Yang, Qin	Stabilization of expansive soil using cementing material from rice husk ash and calcium carbide residue	1-11
Lu, Zichen / Merkl, Jan-Philip / Schmidtke, Christian / Pulkin, Maxim / Deschner, Florian / Wache, Steffen / Jin, Yu / Stephan, Dietmar	A systematic study on polymer modified alkali-activated slag – Part I: Stability analysis of colloidal polymer dispersion in sodium water glass	40-49
Hu, Ji-hong / Sun, Ming-qing / Li, Jun / Wei, Yun-pang / Chen, Jian-zhong	Tensile characteristics of strain-hardening cement-based composites with different curing ages	709-719
Guardia, Cynthia / Barluenga, Gonzalo / Palomar, Irene / Diarce, Gonzalo	Thermal enhanced cement-lime mortars with phase change materials (PCM), lightweight aggregate and cellulose fibers	586-594
Tian, Yu-xiang / Ma, Biao / Liu, Feng-wei / Li, Ning / Zhou, Xue-yan	Thermoregulation effect analysis of microencapsulated phase change thermoregulation agent for asphalt pavement	139-150
Blaauw, Sheldon A. / Maina, James W. / Horak, Emile	Towards a mix design model for the prediction of permeability of hot-mix asphalt	637-642
Mahdikhani, Mahdi / Khanban, MohamadReza	Utilization of industrial waste residue containing heavy metals as a substitute for fine aggregates	772-786
Perera, Sahan / Arulrajah, Arul / Wong, Yat Choy / Horpibulsuk, Suksun / Maghool, Farshid	Utilizing recycled PET blends with demolition wastes as construction materials	200-209
Cho, Byoung Hooi / Nam, Boo Hyun / Seo, Sangyeon / Kim, Jungil / An, Jinwoo / Youn, Heejung	Waterproofing performance of waterstop with adhesive bonding used at joints of underground concrete structures	491-500

Über diese
Datenseite
IssueID
28455
Veröffentlicht am:
24.06.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.