Construction and Building Materials - September 2019

Published:	September 2019

Articles in this Issue

Author(s)	Title	Page(s)
Hamidi, Fatemeh / Aslani, Farhad	Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges	582-609
Chen, Wei / Jin, Ruoyu / Xu, Yidong / Wanatowski, Dariusz / Li, Bo / Yan, Libo / Pan, Zhihong / Yang, Yang	Adopting recycled aggregates as sustainable construction materials: A review of the scientific literature	483-496
Cepuritis, Rolands / Skare, Elisabeth L. / Ramenskiy, Evgeny / Mørtsell, Ernst / Smeplass, Sverre / Li, Shizhao / Jacobsen, Stefan / Spangenberg, Jon	Analysing limitations of the FlowCyl as a one-point viscometer test for cement paste	333-340
Chen, Jiaqi / Wang, Hao / Xie, Pengyu / Najm, Husam	Analysis of thermal conductivity of porous concrete using laboratory measurements and microstructure models	90-98
Liaudat, Joaquín / Carol, Ignacio / López, Carlos M. / Leemann, Andreas	ASR expansions at the level of a single glass-cement paste interface: experimental results and proposal of a reaction-expansion mechanism	108-118
Cao, Jixing / Xiong, Haibei / Chen, Jiawei / Huynh, Alexandre	Bayesian parameter identification for empirical model of CLT connections	254-269
Faure, A. / Coudray, C. / Anger, B. / Moulin, I. / Colina, H. / Izoret, L. / Théry, F. / Smith, A.	Beneficial reuse of dam fine sediments as clinker raw material	365-384
Huang, Le / Xu, Lihua / Chi, Yin / Deng, Fangqian / Zhang, Aoli	Bond strength of deformed bar embedded in steel-polypropylene hybrid fiber reinforced concrete	176-192
Medeghini, Laura / Ferrini, Vincenzo / Di Nanni, Francesca / D'Uva, Francesco / Mignardi, Silvano / De Vito, Caterina	Ceramic pipes of the Roman aqueduct from Raiano village (L'Aquila, Italy): A technological study	618-627
Zhang, Derun / Luo, Rong / Zeng, Zhe	Characterization of surface free energy of mineral filler by spreading pressure approach	126-134
Liang, Chaofeng / Ma, Hongwang / Pan, Yiqian / Ma, Zhiming / Duan, Zhenhua / He, Zhihai	Chloride permeability and the caused steel corrosion in the concrete with carbonated recycled aggregate	506-518
Taherkhani, Hasan / Tajdini, Milad	Comparing the effects of nano-silica and hydrated lime on the properties of asphalt concrete	308-315
Tsangouri, Eleni / Gilabert, Francisco A. / De Belie, Nele / Van Hemelrijck, Danny / Zhu, Xingyi / Aggelis, Dimitrios G.	Concrete fracture toughness increase by embedding self-healing capsules using an integrated experimental approach	424-433
Jafari, Samira / Rots, Jan G. / Esposito, Rita	Core testing method to assess nonlinear behavior of brick masonry under compression: A comparative experimental study	193-205
Luo, Wenting / Li, Lin	Development of a new analytical water film depth (WFD) prediction model for asphalt pavement drainage evaluation	530-542
Hwang, Chao-Lung / Yehualaw, Mitiku Damtie / Vo, Duy-Hai / Huynh, Trong-Phuoc	Development of high-strength alkali-activated pastes containing high volumes of waste brick and ceramic powders	519-529
Xie, Xiaoli / Feng, Qingge / Chen, Zheng / Jiang, Li / Lu, Wei	Diffusion and distribution of chloride ions in carbonated concrete with fly ash	119-125
Caprili, Silvia / Salvatore, Walter / Valentini, Renzo / Ascanio, Cristiano / Luvarà, Gianbruno	Dual-Phase steel reinforcing bars in uncorroded and corroded conditions	162-175
Choe, Gyeongcheol / Kim, Gyuyong / Kim, Hongseop / Hwang, Euichul / Lee, Sangkyu / Nam, Jeongsoo	Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature	448-456
Keskin, Mustafa / Karacasu, Murat	Effect of boron containing additives on asphalt performance and sustainability perspective	434-447
Rajeshwar, B. K. / Jang, Indong / Yi, Chongku	Effect of microwave on mechanical properties of epoxy mortar	681-688
Chu, S. H.	Effect of paste volume on fresh and hardened properties of concrete	284-294
Emamian, Seyed Ali / Eskandari-Naddaf, Hamid	Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by ANN and GEP	8-27
Xie, Zhaoxing / Rizvi, Hashim / Purdy, Caitlin / Ali, Ayman / Mehta, Yusuf	Effect of rejuvenator types and mixing procedures on volumetric properties of asphalt mixtures with 50% RAP	457-464
Jiang, Haiqiang / Qi, Zhaojun / Yilmaz, Erol / Han, Jing / Qiu, Jingping / Dong, Chunlei	Effectiveness of alkali-activated slag as alternative binder on workability and early age compressive strength of cemented paste backfills	689-700
Khan, Rakibul I. / Ashraf, Warda	Effects of ground wollastonite on cement hydration kinetics and strength development	150-161
Onoue, Kozo	Energy consumption characteristics of concrete using granulated blast-furnace slag sand related to nucleation and propagation of microcracks	404-412
Wang, Rui / Xu, Gang / Chen, Xianhua / Zhou, Wenbin / Zhang, Hanyu	Evaluation of aging resistance for high-performance crumb tire rubber compound modified asphalt	497-505
Xue, Yongjie / Hu, Zhenhua / Wang, Chen / Xiao, Yue	Evaluation of dissolved organic carbon released from aged asphalt binder in aqueous solution	465-476
Abdulkareem, Muyideen / Ayeronfe, Fadeelat / Abd Majid, Muhd Zaimi / Mohd.Sam, Abdul Rahman / Kim, Jang-Ho Jay	Evaluation of effects of multi-varied atmospheric curing conditions on compressive strength of bacterial (bacillus subtilis) cement mortar	1-7
Guan, Cheng / Liu, Jinhao / Zhang, Houjiang / Wang, Xiping / Zhou, Lujing	Evaluation of modulus of elasticity and modulus of rupture of full-size wood composite panels supported on two nodal-lines using a vibration technique	64-72
García Calvo, J. L. / Carballosa, P. / Castillo, A. / Revuelta, D. / Gutiérrez, J. P. / Castellote, M.	Expansive concretes with photocatalytic activity for pavements: Enhanced performance and modifications of the expansive hydrates composition	394-403
Wang, Bo / Guan, Shaoyu / Zhang, Yi / Bai, Yongtao	Experimental behavior and failure modes of hybrid beam-to-column connections with RC wing-walls in industrial construction	628-643
Cadoni, Ezio / Forni, Daniele / Bonnet, Emmanuel / Dobruský, Svatopluk	Experimental study on direct tensile behaviour of UHPFRC under high strain-rates	667-680
Suárez-Riestra, F. / Estévez-Cimadevila, J. / Martín-Gutiérrez, E. / Otero-Chans, D.	Experimental, analytical and numerical vibration analysis of long-span timber-timber composite floors in self-tensioning and non-tensioning configurations	341-350
Zhang, Jun / Wang, Yizhuang David / Su, Yongtao	Fatigue damage evolution model of asphalt mixture considering influence of loading frequency	712-720
Barrias, António / Casas, Joan R. / Villalba, Sergi	Fatigue performance of distributed optical fiber sensors in reinforced concrete elements	214-223
Malladi, Haritha / Castorena, Cassie	Field measurements of emulsion application rates and pavement emulsion absorption in tack coats and chip seals	701-711
Ghavami, Masoud Seyed Mohammad / Hosseini, Maryam Sadat / Zavattieri, Pablo D. / Haddock, John E.	Flexible pavement drainage system effectiveness	99-107
Zhang, Ting / Niu, Ditao / Rong, Chong	GFRP-confined coral aggregate concrete cylinders: The experimental and theoretical analysis	206-213
Qian, Guoping / Yu, Huanan / Gong, Xiangbing / Zhao, Lu	Impact of Nano-TiO2 on the NO2 degradation and rheological performance of asphalt pavement	53-63
Mishra, Vinamra / Singh, Dharamveer	Impact of short-term aging temperatures of asphalt binder and aggregate roughness levels on bond strength	295-307
Su, Yilin / Feng, Jianhang / Jin, Peng / Qian, Chunxiang	Influence of bacterial self-healing agent on early age performance of cement-based materials	224-234
Saleh, Hosam M. / El-Saied, Fathy A. / Salaheldin, Taher A. / Hezo, Aya A.	Influence of severe climatic variability on the structural, mechanical and chemical stability of cement kiln dust-slag-nanosilica composite used for radwaste solidification	556-567
Mostofinejad, Davood / Hosseini, Seyed Mohammad / Nader Tehrani, Bahareh / Eftekhar, Mohammad Reza / Dyari, Mohsen	Innovative warp and woof strap (WWS) method to anchor the FRP sheets in strengthened concrete beams	351-364
Sangoju, Bhaskar / Ramanjaneyulu, K. / Sasmal, Saptarshi / Srinivas, V. / Sivasubramanian, K.	NDT for condition assessment of IDCT RC walls and repair measures for long term durability	270-283
Tong, Zheng / Guo, Haoyan / Gao, Jie / Wang, Zhenjun	A novel method for multi-scale carbon fiber distribution characterization in cement-based composites	40-52
Salvador, Renan P. / Rambo, Dimas A. S. / Bueno, Roberto M. / Silva, Kaio T. / de Figueiredo, Antonio D.	On the use of blast-furnace slag in sprayed concrete applications	543-555
Kang, Sung-Hoon / Jeong, Yeonung / Kim, Min Ook / Moon, Juhyuk	Pozzolanic reaction on alkali-activated Class F fly ash for ambient condition curable structural materials	235-244
Ning, Chao-Lie / Wang, Liping / Du, Wenqi	A practical approach to predict the hysteresis loop of reinforced concrete columns failing in different modes	644-656
Salamati, Mohammad / Kamyabjou, Ghazal / Mohamadi, Mohadese / Taghizade, Katayoun / Kowsari, Elaheh	Preparation of TiO2@W-VO2 thermochromic thin film for the application of energy efficient smart windows and energy modeling studies of the produced glass	477-482
Zhang, Jiufu / Yan, Yun / Hu, Zhihua / Xie, Xiaoli / Yang, Lin	Properties and hydration behavior of Ti-extracted residues-red gypsum based cementitious materials	610-617
Rajhans, Puja / Chand, Gaurav / Kisku, Nishikant / Panda, Sarat Kumar / Nayak, Sanket	Proposed mix design method for producing sustainable self compacting heat cured recycled aggregate concrete and its microstructural investigation	568-581
Yan, Kezhen / Li, Lanlan / Zheng, kaigao / Ge, Dongdong	Research on properties of bitumen mortar containing municipal solid waste incineration fly ash	657-666
Li, Linfeng / Liu, Weifeng / Ma, Meng / Jing, Guoqing / Liu, Weining	Research on the dynamic behaviour of the railway ballast assembly subject to the low loading condition based on a tridimensional DEM-FDM coupled approach	135-149
Ma, Xianwei / Liu, Jianhui / Shi, Caijun	A review on the use of LWA as an internal curing agent of high performance cement-based materials	385-393
Behnia, Behzad / Reis, Henrique	Self-healing of thermal cracks in asphalt pavements	316-322
Cai, Lixiong / Li, Xiangguo / Liu, Wenli / Ma, Baoguo / Lv, Yang	The slurry and physical-mechanical performance of autoclaved aerated concrete with high content solid wastes: Effect of grinding process	28-39
Li, Jing / Yang, Song / Liu, Yu / Muhammad, Yaseen / Su, Zhibin / Yang, Jing	Studies on the properties of modified heavy calcium carbonate and SBS composite modified asphalt	413-423
Robinson, W. Jeremy / Doyle, Jesse D.	Tensile performance evaluation of joint adhesive for asphalt pavements	245-253
Chowdhury, Debasish / Neogi, Subhasis	Thermal performance evaluation of traditional walls and roof used in tropical climate using guarded hot box	73-89
Wang, Xue / Shen, Shihui / Huang, Hai / Zhang, Zhidong	Towards smart compaction: Particle movement characteristics from laboratory to the field	323-332

About this
data sheet
IssueID
28434
Published on:
07/06/2019
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.