Construction and Building Materials - September 2019

Erschienen:	September 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Hamidi, Fatemeh / Aslani, Farhad	Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges	582-609
Chen, Wei / Jin, Ruoyu / Xu, Yidong / Wanatowski, Dariusz / Li, Bo / Yan, Libo / Pan, Zhihong / Yang, Yang	Adopting recycled aggregates as sustainable construction materials: A review of the scientific literature	483-496
Cepuritis, Rolands / Skare, Elisabeth L. / Ramenskiy, Evgeny / Mørtsell, Ernst / Smeplass, Sverre / Li, Shizhao / Jacobsen, Stefan / Spangenberg, Jon	Analysing limitations of the FlowCyl as a one-point viscometer test for cement paste	333-340
Chen, Jiaqi / Wang, Hao / Xie, Pengyu / Najm, Husam	Analysis of thermal conductivity of porous concrete using laboratory measurements and microstructure models	90-98
Liaudat, Joaquín / Carol, Ignacio / López, Carlos M. / Leemann, Andreas	ASR expansions at the level of a single glass-cement paste interface: experimental results and proposal of a reaction-expansion mechanism	108-118
Cao, Jixing / Xiong, Haibei / Chen, Jiawei / Huynh, Alexandre	Bayesian parameter identification for empirical model of CLT connections	254-269
Faure, A. / Coudray, C. / Anger, B. / Moulin, I. / Colina, H. / Izoret, L. / Théry, F. / Smith, A.	Beneficial reuse of dam fine sediments as clinker raw material	365-384
Huang, Le / Xu, Lihua / Chi, Yin / Deng, Fangqian / Zhang, Aoli	Bond strength of deformed bar embedded in steel-polypropylene hybrid fiber reinforced concrete	176-192
Medeghini, Laura / Ferrini, Vincenzo / Di Nanni, Francesca / D'Uva, Francesco / Mignardi, Silvano / De Vito, Caterina	Ceramic pipes of the Roman aqueduct from Raiano village (L'Aquila, Italy): A technological study	618-627
Zhang, Derun / Luo, Rong / Zeng, Zhe	Characterization of surface free energy of mineral filler by spreading pressure approach	126-134
Liang, Chaofeng / Ma, Hongwang / Pan, Yiqian / Ma, Zhiming / Duan, Zhenhua / He, Zhihai	Chloride permeability and the caused steel corrosion in the concrete with carbonated recycled aggregate	506-518
Taherkhani, Hasan / Tajdini, Milad	Comparing the effects of nano-silica and hydrated lime on the properties of asphalt concrete	308-315
Tsangouri, Eleni / Gilabert, Francisco A. / De Belie, Nele / Van Hemelrijck, Danny / Zhu, Xingyi / Aggelis, Dimitrios G.	Concrete fracture toughness increase by embedding self-healing capsules using an integrated experimental approach	424-433
Jafari, Samira / Rots, Jan G. / Esposito, Rita	Core testing method to assess nonlinear behavior of brick masonry under compression: A comparative experimental study	193-205
Luo, Wenting / Li, Lin	Development of a new analytical water film depth (WFD) prediction model for asphalt pavement drainage evaluation	530-542
Hwang, Chao-Lung / Yehualaw, Mitiku Damtie / Vo, Duy-Hai / Huynh, Trong-Phuoc	Development of high-strength alkali-activated pastes containing high volumes of waste brick and ceramic powders	519-529
Xie, Xiaoli / Feng, Qingge / Chen, Zheng / Jiang, Li / Lu, Wei	Diffusion and distribution of chloride ions in carbonated concrete with fly ash	119-125
Caprili, Silvia / Salvatore, Walter / Valentini, Renzo / Ascanio, Cristiano / Luvarà, Gianbruno	Dual-Phase steel reinforcing bars in uncorroded and corroded conditions	162-175
Choe, Gyeongcheol / Kim, Gyuyong / Kim, Hongseop / Hwang, Euichul / Lee, Sangkyu / Nam, Jeongsoo	Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature	448-456
Keskin, Mustafa / Karacasu, Murat	Effect of boron containing additives on asphalt performance and sustainability perspective	434-447
Rajeshwar, B. K. / Jang, Indong / Yi, Chongku	Effect of microwave on mechanical properties of epoxy mortar	681-688
Chu, S. H.	Effect of paste volume on fresh and hardened properties of concrete	284-294
Emamian, Seyed Ali / Eskandari-Naddaf, Hamid	Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by ANN and GEP	8-27
Xie, Zhaoxing / Rizvi, Hashim / Purdy, Caitlin / Ali, Ayman / Mehta, Yusuf	Effect of rejuvenator types and mixing procedures on volumetric properties of asphalt mixtures with 50% RAP	457-464
Jiang, Haiqiang / Qi, Zhaojun / Yilmaz, Erol / Han, Jing / Qiu, Jingping / Dong, Chunlei	Effectiveness of alkali-activated slag as alternative binder on workability and early age compressive strength of cemented paste backfills	689-700
Khan, Rakibul I. / Ashraf, Warda	Effects of ground wollastonite on cement hydration kinetics and strength development	150-161
Onoue, Kozo	Energy consumption characteristics of concrete using granulated blast-furnace slag sand related to nucleation and propagation of microcracks	404-412
Wang, Rui / Xu, Gang / Chen, Xianhua / Zhou, Wenbin / Zhang, Hanyu	Evaluation of aging resistance for high-performance crumb tire rubber compound modified asphalt	497-505
Xue, Yongjie / Hu, Zhenhua / Wang, Chen / Xiao, Yue	Evaluation of dissolved organic carbon released from aged asphalt binder in aqueous solution	465-476
Abdulkareem, Muyideen / Ayeronfe, Fadeelat / Abd Majid, Muhd Zaimi / Mohd.Sam, Abdul Rahman / Kim, Jang-Ho Jay	Evaluation of effects of multi-varied atmospheric curing conditions on compressive strength of bacterial (bacillus subtilis) cement mortar	1-7
Guan, Cheng / Liu, Jinhao / Zhang, Houjiang / Wang, Xiping / Zhou, Lujing	Evaluation of modulus of elasticity and modulus of rupture of full-size wood composite panels supported on two nodal-lines using a vibration technique	64-72
García Calvo, J. L. / Carballosa, P. / Castillo, A. / Revuelta, D. / Gutiérrez, J. P. / Castellote, M.	Expansive concretes with photocatalytic activity for pavements: Enhanced performance and modifications of the expansive hydrates composition	394-403
Wang, Bo / Guan, Shaoyu / Zhang, Yi / Bai, Yongtao	Experimental behavior and failure modes of hybrid beam-to-column connections with RC wing-walls in industrial construction	628-643
Cadoni, Ezio / Forni, Daniele / Bonnet, Emmanuel / Dobruský, Svatopluk	Experimental study on direct tensile behaviour of UHPFRC under high strain-rates	667-680
Suárez-Riestra, F. / Estévez-Cimadevila, J. / Martín-Gutiérrez, E. / Otero-Chans, D.	Experimental, analytical and numerical vibration analysis of long-span timber-timber composite floors in self-tensioning and non-tensioning configurations	341-350
Zhang, Jun / Wang, Yizhuang David / Su, Yongtao	Fatigue damage evolution model of asphalt mixture considering influence of loading frequency	712-720
Barrias, António / Casas, Joan R. / Villalba, Sergi	Fatigue performance of distributed optical fiber sensors in reinforced concrete elements	214-223
Malladi, Haritha / Castorena, Cassie	Field measurements of emulsion application rates and pavement emulsion absorption in tack coats and chip seals	701-711
Ghavami, Masoud Seyed Mohammad / Hosseini, Maryam Sadat / Zavattieri, Pablo D. / Haddock, John E.	Flexible pavement drainage system effectiveness	99-107
Zhang, Ting / Niu, Ditao / Rong, Chong	GFRP-confined coral aggregate concrete cylinders: The experimental and theoretical analysis	206-213
Qian, Guoping / Yu, Huanan / Gong, Xiangbing / Zhao, Lu	Impact of Nano-TiO2 on the NO2 degradation and rheological performance of asphalt pavement	53-63
Mishra, Vinamra / Singh, Dharamveer	Impact of short-term aging temperatures of asphalt binder and aggregate roughness levels on bond strength	295-307
Su, Yilin / Feng, Jianhang / Jin, Peng / Qian, Chunxiang	Influence of bacterial self-healing agent on early age performance of cement-based materials	224-234
Saleh, Hosam M. / El-Saied, Fathy A. / Salaheldin, Taher A. / Hezo, Aya A.	Influence of severe climatic variability on the structural, mechanical and chemical stability of cement kiln dust-slag-nanosilica composite used for radwaste solidification	556-567
Mostofinejad, Davood / Hosseini, Seyed Mohammad / Nader Tehrani, Bahareh / Eftekhar, Mohammad Reza / Dyari, Mohsen	Innovative warp and woof strap (WWS) method to anchor the FRP sheets in strengthened concrete beams	351-364
Sangoju, Bhaskar / Ramanjaneyulu, K. / Sasmal, Saptarshi / Srinivas, V. / Sivasubramanian, K.	NDT for condition assessment of IDCT RC walls and repair measures for long term durability	270-283
Tong, Zheng / Guo, Haoyan / Gao, Jie / Wang, Zhenjun	A novel method for multi-scale carbon fiber distribution characterization in cement-based composites	40-52
Salvador, Renan P. / Rambo, Dimas A. S. / Bueno, Roberto M. / Silva, Kaio T. / de Figueiredo, Antonio D.	On the use of blast-furnace slag in sprayed concrete applications	543-555
Kang, Sung-Hoon / Jeong, Yeonung / Kim, Min Ook / Moon, Juhyuk	Pozzolanic reaction on alkali-activated Class F fly ash for ambient condition curable structural materials	235-244
Ning, Chao-Lie / Wang, Liping / Du, Wenqi	A practical approach to predict the hysteresis loop of reinforced concrete columns failing in different modes	644-656
Salamati, Mohammad / Kamyabjou, Ghazal / Mohamadi, Mohadese / Taghizade, Katayoun / Kowsari, Elaheh	Preparation of TiO2@W-VO2 thermochromic thin film for the application of energy efficient smart windows and energy modeling studies of the produced glass	477-482
Zhang, Jiufu / Yan, Yun / Hu, Zhihua / Xie, Xiaoli / Yang, Lin	Properties and hydration behavior of Ti-extracted residues-red gypsum based cementitious materials	610-617
Rajhans, Puja / Chand, Gaurav / Kisku, Nishikant / Panda, Sarat Kumar / Nayak, Sanket	Proposed mix design method for producing sustainable self compacting heat cured recycled aggregate concrete and its microstructural investigation	568-581
Yan, Kezhen / Li, Lanlan / Zheng, kaigao / Ge, Dongdong	Research on properties of bitumen mortar containing municipal solid waste incineration fly ash	657-666
Li, Linfeng / Liu, Weifeng / Ma, Meng / Jing, Guoqing / Liu, Weining	Research on the dynamic behaviour of the railway ballast assembly subject to the low loading condition based on a tridimensional DEM-FDM coupled approach	135-149
Ma, Xianwei / Liu, Jianhui / Shi, Caijun	A review on the use of LWA as an internal curing agent of high performance cement-based materials	385-393
Behnia, Behzad / Reis, Henrique	Self-healing of thermal cracks in asphalt pavements	316-322
Cai, Lixiong / Li, Xiangguo / Liu, Wenli / Ma, Baoguo / Lv, Yang	The slurry and physical-mechanical performance of autoclaved aerated concrete with high content solid wastes: Effect of grinding process	28-39
Li, Jing / Yang, Song / Liu, Yu / Muhammad, Yaseen / Su, Zhibin / Yang, Jing	Studies on the properties of modified heavy calcium carbonate and SBS composite modified asphalt	413-423
Robinson, W. Jeremy / Doyle, Jesse D.	Tensile performance evaluation of joint adhesive for asphalt pavements	245-253
Chowdhury, Debasish / Neogi, Subhasis	Thermal performance evaluation of traditional walls and roof used in tropical climate using guarded hot box	73-89
Wang, Xue / Shen, Shihui / Huang, Hai / Zhang, Zhidong	Towards smart compaction: Particle movement characteristics from laboratory to the field	323-332

Über diese
Datenseite
IssueID
28434
Veröffentlicht am:
07.06.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - September 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - September 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.