Construction and Building Materials - August 2019

Published:	August 2019

Articles in this Issue

Author(s)	Title	Page(s)
Ashtiani, Milad Zokaei / Muench, Stephen T. / Gent, David / Uhlmeyer, Jeffrey S.	Application of satellite imagery in estimating stockpiled reclaimed asphalt pavement (RAP) inventory: A Washington State case study	292-300
Liu, Ziming / Wang, Xinming / Luo, Sang / Yang, Xu / Li, Qiang	Asphalt mixture design for porous ultra-thin overlay	251-264
Qiu, Wenjing / Fu, Shaojun / Ye, Jianqiao	Auto-generation methodology of complex-shaped coarse aggregate set of 3D concrete numerical test specimen	612-625
Gupta, Trilok / Siddique, Salman / Sharma, Ravi K. / Chaudhary, Sandeep	Behaviour of waste rubber powder and hybrid rubber concrete in aggressive environment	283-291
Jamshidi, Ali / White, Greg / Hosseinpour, Mehdi / Kurumisawa, Kiyofumi / Hamzah, Meor Othman	Characterization of effects of reclaimed asphalt pavement (RAP) source and content on dynamic modulus of hot mix asphalt concrete	487-497
Ingrassia, Lorenzo Paolo / Lu, Xiaohu / Ferrotti, Gilda / Canestrari, Francesco	Chemical and rheological investigation on the short- and long-term aging properties of bio-binders for road pavements	518-529
Afridi, Suleman / Sikandar, Muhammad Ali / Waseem, Muhammad / Nasir, Hasan / Naseer, Amjad	Chemical durability of superabsorbent polymer (SAP) based geopolymer mortars (GPMs)	530-542
Do, T. A. / Chen, H. L. / Leon, G. / Nguyen, T. H.	A combined finite difference and finite element model for temperature and stress predictions of cast-in-place cap beam on precast columns	172-184
Zheng, Chuanfeng / Li, Ruiming / Hu, Mingjun / Zou, Linlin	Determination of low-temperature crack control parameter of binding asphalt materials based on gray correlation analysis	226-233
Ashish, Deepankar Kumar / Verma, Surender Kumar	Determination of optimum mixture design method for self-compacting concrete: Validation of method with experimental results	664-678
González-Ortega, M. A. / Cavalaro, S. H. P. / Rodriguez de Sensale, G. / Aguado, A.	Durability of concrete with electric arc furnace slag aggregate	543-556
Miah, Md Jihad / Kallel, Hatem / Carré, Hélène / Pimienta, Pierre / La Borderie, Christian	The effect of compressive loading on the residual gas permeability of concrete	12-19
Ma, Baoguo / Jiang, Qi / Huang, Jian / Wang, Xin / Leng, Jinyue	Effect of different silica particles on flowability of gypsum powder for 3D powder printing	394-402
Khoshsirat, Vida / Bayesteh, Hamed / Sharifi, Mahdi	Effect of high salinity in grout on the performance of cement-stabilized marine clay	93-107
Bayiha, Blaise Ngwem / Billong, Ndigui / Yamb, Emmanuel / Kaze, Rodrigue Cyriaque / Nzengwa, Robert	Effect of limestone dosages on some properties of geopolymer from thermally activated halloysite	28-35
Tanzadeh, Reza / Vafaeian, Mahmood / Yusefzadeh Fard, Mikael	Effects of micro-nano-lime (CaCO3) particles on the strength and resilience of road clay beds	193-201
Liu, Kefei / Zhu, Juncai / Zhang, Kun / Wu, Junliang / Yin, Jian / Shi, Xianming	Effects of mixing sequence on mechanical properties of graphene oxide and warm mix additive composite modified asphalt binder	301-309
Peng, Kang / Zhou, Jiaqi / Zou, Quanle / Zhang, Jing / Wu, Fei	Effects of stress lower limit during cyclic loading and unloading on deformation characteristics of sandstones	202-215
Liu, Jintao / Jin, Hang / Gu, Chunping / Yang, Yang	Effects of zinc oxide nanoparticles on early-age hydration and the mechanical properties of cement paste	352-362
Pham, N.-P. / Toumi, A. / Turatsinze, A.	Evaluating damage of rubberized cement-based composites under aggressive environments	234-241
Aminul Haque, M. / Chen, Bing / Ahmad, Muhammad Riaz / Shah, Syed Farasat Ali	Evaluating the physical and strength properties of fibre reinforced magnesium phosphate cement mortar considering mass loss	427-440
Jia, Wenli / Markine, Valéri / Guo, Yunlong / Jing, Guoqing	Experimental and numerical investigations on the shear behaviour of recycled railway ballast	310-320
Arain, Muhammad Fahad / Wang, Mingxue / Chen, Jianyong / Zhang, Huapeng	Experimental and numerical study on tensile behavior of surface modified PVA fiber reinforced strain-hardening cementitious composites (PVA-SHCC)	403-415
Gao, Shuling / Jin, Jiapeng / Hu, Guanhua / Qi, Lin	Experimental investigation of the interface bond properties between SHCC and concrete under sulfate attack	651-663
Hu, Bo / Lv, Heng-Lin / Kundu, Tribikram	Experimental study on seismic behavior of reinforced concrete frame in primary and middle schools with different strengthening methods	473-486
Chu, Huaibao / Yang, Xiaolin / Li, Shuanjie / Liang, Weimin	Experimental study on the blasting-vibration safety standard for young concrete based on the damage accumulation effect	20-27
Guo, Xiaolu / Zhang, Tangjun / Song, Meng	Hydrothermal synthesized and nano-modified wall materials from solid wastes	242-250
Guo, Minglei / Xiao, Jia / Wang, Jialei	Impact of the coupled substitution of CaCO3 and CaSO4·2H2O on chloride binding behavior in hydrated C3A pastes	638-650
Yoo, Doo-Yeol / Kim, Soonho / Lee, Jin-Young / You, Ilhwan / Lee, Seung-Jung	Implication of calcium sulfoaluminate-based expansive agent on tensile behavior of ultra-high-performance fiber-reinforced concrete	679-693
Wang, Yan-Shuai / Alrefaei, Yazan / Dai, Jian-Guo	Improvement of early-age properties of silico-aluminophosphate geopolymer using dead burnt magnesia	1-11
Ozturk, Savas / Sutcu, Mucahit / Erdogmus, Ertugrul / Gencel, Osman	Influence of tea waste concentration in the physical, mechanical and thermal properties of brick clay mixtures	592-599
Simão, Luana de Carvalho Ribeiro / Nogueira, André Baltazar / Monte, Renata / Salvador, Renan P. / de Figueiredo, Antonio Domingues	Influence of the instability of the double punch test on the post-crack response of fiber-reinforced concrete	185-192
Marani, Afshin / Nehdi, Moncef L.	Integrating phase change materials in construction materials: Critical review	36-49
Ziari, Hassan / Divandari, Hassan / Hajiloo, Mojtaba / Amini, Amir	Investigating the effect of amorphous carbon powder on the moisture sensitivity, fatigue performance and rutting resistance of rubberized asphalt concrete mixtures	62-72
Shatarat, Nasim / Alhaq, Abeer Abed / Katkhuda, Hasan / Jaber, Mu'tasime Abdel	Investigation of axial compressive behavior of reinforced concrete columns using Recycled Coarse Aggregate and Recycled Asphalt Pavement aggregate	384-393
Kürklü, Gökhan / Gorhan, Gokhan	Investigation of usability of quarry dust waste in fly ash-based geopolymer adhesive mortar production	498-506
Izzi, Matteo / Polastri, Andrea	Low cycle ductile performance of screws used in timber structures	416-426
Singh, Tripti / Page, Dave / Simpson, Ian	Manufactured structural timber building materials and their durability	84-92
Çelikten, Serhat / Sarıdemir, Mustafa / Özgür Deneme, İbrahim	Mechanical and microstructural properties of alkali-activated slag and slag + fly ash mortars exposed to high temperature	50-61
Wu, Zhijun / Cui, Wenjun / Fan, Lifeng / Liu, Quansheng	Mesomechanism of the dynamic tensile fracture and fragmentation behaviour of concrete with heterogeneous mesostructure	573-591
Tran, Manh Tien / Vu, Xuan Hong / Ferrier, Emmanuel	Mesoscale experimental investigation of thermomechanical behaviour of the carbon textile reinforced refractory concrete under simultaneous mechanical loading and elevated temperature	156-171
Yamashita, Makio / Tanaka, Hisanobu / Sakai, Etsuo / Tsuchiya, Koichi	Mineralogical study of high SO3 clinker produced using waste gypsum board in a cement kiln	507-517
Yu, Yuguo / Chen, Xiaojun / Gao, Wei / Wu, Di / Castel, Arnaud	Modelling non-isothermal chloride ingress in unsaturated cement-based materials	441-455
Sun, Wei / Liu, Haifeng / Pan, Chunlin / He, Tao	Modelling of a novel strong and ductile FRP composite	73-83
Teixeira, Otacisio G. / Geraldo, Rodrigo H. / da Silva, Francisco Gabriel / Gonçalves, Jardel P. / Camarini, Gladis	Mortar type influence on mechanical performance of repaired reinforced concrete beams	372-383
Du, Jiapei / Bu, Yuhuan / Shen, Zhonghou / Cao, Xuechao	A novel fluid for use in oil and gas well construction to prevent the oil and gas leak from the wellbore	626-637
Zhu, Juncai / Zhang, Kun / Liu, Kefei / Shi, Xianming	Performance of hot and warm mix asphalt mixtures enhanced by nano-sized graphene oxide	273-282
Zheng, Yu / Zhou, Lingzhu / Taylor, Su. E. / Ma, Hongwei	Serviceability of one-way high-volume fly ash-self-compacting concrete slabs reinforced with basalt FRP bars	108-127
Liu, Bing / Feng, Chao / Deng, Zhiheng	Shear behavior of three types of recycled aggregate concrete	557-572
Cinitha, A. / Sampath, V. / Kesavan, K.	Strain monitoring of low carbon steel in a corrosive environment using fiber Bragg technology	265-272
Praveenkumar, T. R. / Vijayalakshmi, M. M. / Meddah, M. S.	Strengths and durability performances of blended cement concrete with TiO2 nanoparticles and rice husk ash	343-351
Marques, Rui / Lourenço, Paulo B.	Structural behaviour and design rules of confined masonry walls: Review and proposals	137-155
Jia, Meng / Zhang, Zengping / Wei, Long / Wu, Xingjiao / Cui, Xin / Zhang, Hongliang / Lv, Wenjiang / Zhang, Qiang	Study on properties and mechanism of organic montmorillonite modified bitumens: View from the selection of organic reagents	331-342
Chen, Yuan-Yuan / Chen, Chun-tsun / Wang, Her-Yung	Study on the influence of the average lubricant quantity of aggregates on the concrete engineering properties	321-330
Musaddiq Laskar, Sulaem / Talukdar, Sudip	A study on the performance of damaged RC members repaired using ultra-fine slag based geopolymer mortar	216-225
Cheng, Congmi / He, Juan / Zhang, Jian / Yang, Yinan	Study on the time-dependent mechanical properties of glass fiber reinforced cement (GRC) with fly ash or slag	128-136
Sen, Sushobhan / Roesler, Jeffery	Thermal and optical characterization of asphalt field cores for microscale urban heat island analysis	600-611
Li, Jing / Shang, Min / Liu, Guoqiang / Yang, Tao / Pan, Yuanyuan / Zhou, Jian / Zhao, Yongli	Two-step improvements of volumetric design method based on multi-point supported skeleton for asphalt mixtures	456-472
Faiyas, A. P. A. / Erich, S. J. F. / Huinink, H. P. / Adan, O. C. G.	Understanding the water absorption from MHEC modified glue mortar into porous tile: Influence of pre-drying	363-371

About this
data sheet
IssueID
28433
Published on:
07/06/2019
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - August 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - August 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.