Construction and Building Materials - août 2019

Publié:	août 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ashtiani, Milad Zokaei / Muench, Stephen T. / Gent, David / Uhlmeyer, Jeffrey S.	Application of satellite imagery in estimating stockpiled reclaimed asphalt pavement (RAP) inventory: A Washington State case study	292-300
Liu, Ziming / Wang, Xinming / Luo, Sang / Yang, Xu / Li, Qiang	Asphalt mixture design for porous ultra-thin overlay	251-264
Qiu, Wenjing / Fu, Shaojun / Ye, Jianqiao	Auto-generation methodology of complex-shaped coarse aggregate set of 3D concrete numerical test specimen	612-625
Gupta, Trilok / Siddique, Salman / Sharma, Ravi K. / Chaudhary, Sandeep	Behaviour of waste rubber powder and hybrid rubber concrete in aggressive environment	283-291
Jamshidi, Ali / White, Greg / Hosseinpour, Mehdi / Kurumisawa, Kiyofumi / Hamzah, Meor Othman	Characterization of effects of reclaimed asphalt pavement (RAP) source and content on dynamic modulus of hot mix asphalt concrete	487-497
Ingrassia, Lorenzo Paolo / Lu, Xiaohu / Ferrotti, Gilda / Canestrari, Francesco	Chemical and rheological investigation on the short- and long-term aging properties of bio-binders for road pavements	518-529
Afridi, Suleman / Sikandar, Muhammad Ali / Waseem, Muhammad / Nasir, Hasan / Naseer, Amjad	Chemical durability of superabsorbent polymer (SAP) based geopolymer mortars (GPMs)	530-542
Do, T. A. / Chen, H. L. / Leon, G. / Nguyen, T. H.	A combined finite difference and finite element model for temperature and stress predictions of cast-in-place cap beam on precast columns	172-184
Zheng, Chuanfeng / Li, Ruiming / Hu, Mingjun / Zou, Linlin	Determination of low-temperature crack control parameter of binding asphalt materials based on gray correlation analysis	226-233
Ashish, Deepankar Kumar / Verma, Surender Kumar	Determination of optimum mixture design method for self-compacting concrete: Validation of method with experimental results	664-678
González-Ortega, M. A. / Cavalaro, S. H. P. / Rodriguez de Sensale, G. / Aguado, A.	Durability of concrete with electric arc furnace slag aggregate	543-556
Miah, Md Jihad / Kallel, Hatem / Carré, Hélène / Pimienta, Pierre / La Borderie, Christian	The effect of compressive loading on the residual gas permeability of concrete	12-19
Ma, Baoguo / Jiang, Qi / Huang, Jian / Wang, Xin / Leng, Jinyue	Effect of different silica particles on flowability of gypsum powder for 3D powder printing	394-402
Khoshsirat, Vida / Bayesteh, Hamed / Sharifi, Mahdi	Effect of high salinity in grout on the performance of cement-stabilized marine clay	93-107
Bayiha, Blaise Ngwem / Billong, Ndigui / Yamb, Emmanuel / Kaze, Rodrigue Cyriaque / Nzengwa, Robert	Effect of limestone dosages on some properties of geopolymer from thermally activated halloysite	28-35
Tanzadeh, Reza / Vafaeian, Mahmood / Yusefzadeh Fard, Mikael	Effects of micro-nano-lime (CaCO3) particles on the strength and resilience of road clay beds	193-201
Liu, Kefei / Zhu, Juncai / Zhang, Kun / Wu, Junliang / Yin, Jian / Shi, Xianming	Effects of mixing sequence on mechanical properties of graphene oxide and warm mix additive composite modified asphalt binder	301-309
Peng, Kang / Zhou, Jiaqi / Zou, Quanle / Zhang, Jing / Wu, Fei	Effects of stress lower limit during cyclic loading and unloading on deformation characteristics of sandstones	202-215
Liu, Jintao / Jin, Hang / Gu, Chunping / Yang, Yang	Effects of zinc oxide nanoparticles on early-age hydration and the mechanical properties of cement paste	352-362
Pham, N.-P. / Toumi, A. / Turatsinze, A.	Evaluating damage of rubberized cement-based composites under aggressive environments	234-241
Aminul Haque, M. / Chen, Bing / Ahmad, Muhammad Riaz / Shah, Syed Farasat Ali	Evaluating the physical and strength properties of fibre reinforced magnesium phosphate cement mortar considering mass loss	427-440
Jia, Wenli / Markine, Valéri / Guo, Yunlong / Jing, Guoqing	Experimental and numerical investigations on the shear behaviour of recycled railway ballast	310-320
Arain, Muhammad Fahad / Wang, Mingxue / Chen, Jianyong / Zhang, Huapeng	Experimental and numerical study on tensile behavior of surface modified PVA fiber reinforced strain-hardening cementitious composites (PVA-SHCC)	403-415
Gao, Shuling / Jin, Jiapeng / Hu, Guanhua / Qi, Lin	Experimental investigation of the interface bond properties between SHCC and concrete under sulfate attack	651-663
Hu, Bo / Lv, Heng-Lin / Kundu, Tribikram	Experimental study on seismic behavior of reinforced concrete frame in primary and middle schools with different strengthening methods	473-486
Chu, Huaibao / Yang, Xiaolin / Li, Shuanjie / Liang, Weimin	Experimental study on the blasting-vibration safety standard for young concrete based on the damage accumulation effect	20-27
Guo, Xiaolu / Zhang, Tangjun / Song, Meng	Hydrothermal synthesized and nano-modified wall materials from solid wastes	242-250
Guo, Minglei / Xiao, Jia / Wang, Jialei	Impact of the coupled substitution of CaCO3 and CaSO4·2H2O on chloride binding behavior in hydrated C3A pastes	638-650
Yoo, Doo-Yeol / Kim, Soonho / Lee, Jin-Young / You, Ilhwan / Lee, Seung-Jung	Implication of calcium sulfoaluminate-based expansive agent on tensile behavior of ultra-high-performance fiber-reinforced concrete	679-693
Wang, Yan-Shuai / Alrefaei, Yazan / Dai, Jian-Guo	Improvement of early-age properties of silico-aluminophosphate geopolymer using dead burnt magnesia	1-11
Ozturk, Savas / Sutcu, Mucahit / Erdogmus, Ertugrul / Gencel, Osman	Influence of tea waste concentration in the physical, mechanical and thermal properties of brick clay mixtures	592-599
Simão, Luana de Carvalho Ribeiro / Nogueira, André Baltazar / Monte, Renata / Salvador, Renan P. / de Figueiredo, Antonio Domingues	Influence of the instability of the double punch test on the post-crack response of fiber-reinforced concrete	185-192
Marani, Afshin / Nehdi, Moncef L.	Integrating phase change materials in construction materials: Critical review	36-49
Ziari, Hassan / Divandari, Hassan / Hajiloo, Mojtaba / Amini, Amir	Investigating the effect of amorphous carbon powder on the moisture sensitivity, fatigue performance and rutting resistance of rubberized asphalt concrete mixtures	62-72
Shatarat, Nasim / Alhaq, Abeer Abed / Katkhuda, Hasan / Jaber, Mu'tasime Abdel	Investigation of axial compressive behavior of reinforced concrete columns using Recycled Coarse Aggregate and Recycled Asphalt Pavement aggregate	384-393
Kürklü, Gökhan / Gorhan, Gokhan	Investigation of usability of quarry dust waste in fly ash-based geopolymer adhesive mortar production	498-506
Izzi, Matteo / Polastri, Andrea	Low cycle ductile performance of screws used in timber structures	416-426
Singh, Tripti / Page, Dave / Simpson, Ian	Manufactured structural timber building materials and their durability	84-92
Çelikten, Serhat / Sarıdemir, Mustafa / Özgür Deneme, İbrahim	Mechanical and microstructural properties of alkali-activated slag and slag + fly ash mortars exposed to high temperature	50-61
Wu, Zhijun / Cui, Wenjun / Fan, Lifeng / Liu, Quansheng	Mesomechanism of the dynamic tensile fracture and fragmentation behaviour of concrete with heterogeneous mesostructure	573-591
Tran, Manh Tien / Vu, Xuan Hong / Ferrier, Emmanuel	Mesoscale experimental investigation of thermomechanical behaviour of the carbon textile reinforced refractory concrete under simultaneous mechanical loading and elevated temperature	156-171
Yamashita, Makio / Tanaka, Hisanobu / Sakai, Etsuo / Tsuchiya, Koichi	Mineralogical study of high SO3 clinker produced using waste gypsum board in a cement kiln	507-517
Yu, Yuguo / Chen, Xiaojun / Gao, Wei / Wu, Di / Castel, Arnaud	Modelling non-isothermal chloride ingress in unsaturated cement-based materials	441-455
Sun, Wei / Liu, Haifeng / Pan, Chunlin / He, Tao	Modelling of a novel strong and ductile FRP composite	73-83
Teixeira, Otacisio G. / Geraldo, Rodrigo H. / da Silva, Francisco Gabriel / Gonçalves, Jardel P. / Camarini, Gladis	Mortar type influence on mechanical performance of repaired reinforced concrete beams	372-383
Du, Jiapei / Bu, Yuhuan / Shen, Zhonghou / Cao, Xuechao	A novel fluid for use in oil and gas well construction to prevent the oil and gas leak from the wellbore	626-637
Zhu, Juncai / Zhang, Kun / Liu, Kefei / Shi, Xianming	Performance of hot and warm mix asphalt mixtures enhanced by nano-sized graphene oxide	273-282
Zheng, Yu / Zhou, Lingzhu / Taylor, Su. E. / Ma, Hongwei	Serviceability of one-way high-volume fly ash-self-compacting concrete slabs reinforced with basalt FRP bars	108-127
Liu, Bing / Feng, Chao / Deng, Zhiheng	Shear behavior of three types of recycled aggregate concrete	557-572
Cinitha, A. / Sampath, V. / Kesavan, K.	Strain monitoring of low carbon steel in a corrosive environment using fiber Bragg technology	265-272
Praveenkumar, T. R. / Vijayalakshmi, M. M. / Meddah, M. S.	Strengths and durability performances of blended cement concrete with TiO2 nanoparticles and rice husk ash	343-351
Marques, Rui / Lourenço, Paulo B.	Structural behaviour and design rules of confined masonry walls: Review and proposals	137-155
Jia, Meng / Zhang, Zengping / Wei, Long / Wu, Xingjiao / Cui, Xin / Zhang, Hongliang / Lv, Wenjiang / Zhang, Qiang	Study on properties and mechanism of organic montmorillonite modified bitumens: View from the selection of organic reagents	331-342
Chen, Yuan-Yuan / Chen, Chun-tsun / Wang, Her-Yung	Study on the influence of the average lubricant quantity of aggregates on the concrete engineering properties	321-330
Musaddiq Laskar, Sulaem / Talukdar, Sudip	A study on the performance of damaged RC members repaired using ultra-fine slag based geopolymer mortar	216-225
Cheng, Congmi / He, Juan / Zhang, Jian / Yang, Yinan	Study on the time-dependent mechanical properties of glass fiber reinforced cement (GRC) with fly ash or slag	128-136
Sen, Sushobhan / Roesler, Jeffery	Thermal and optical characterization of asphalt field cores for microscale urban heat island analysis	600-611
Li, Jing / Shang, Min / Liu, Guoqiang / Yang, Tao / Pan, Yuanyuan / Zhou, Jian / Zhao, Yongli	Two-step improvements of volumetric design method based on multi-point supported skeleton for asphalt mixtures	456-472
Faiyas, A. P. A. / Erich, S. J. F. / Huinink, H. P. / Adan, O. C. G.	Understanding the water absorption from MHEC modified glue mortar into porous tile: Influence of pre-drying	363-371

Informations
sur cette fiche
IssueID
28433
Publié(e) le:
07.06.2019
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - août 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - août 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.