Construction and Building Materials - December 2017

Published:	December 2017

Articles in this Issue

Author(s)	Title	Page(s)
Chen, Yuxuan / Yu, Q. L. / Brouwers, H. J. H.	Acoustic performance and microstructural analysis of bio-based lightweight concrete containing miscanthus	839-851
Velay-Lizancos, Mirian / Azenha, Miguel / Martínez-Lage, Isabel / Vazquez-Burgo, Pablo	Addition of biomass ash in concrete: Effects on E-Modulus, electrical conductivity at early ages and their correlation	1126-1132
Veiga, Rosário	Air lime mortars: What else do we need to know to apply them in conservation and rehabilitation interventions? A review	132-140
Liu, Rong-gui / Ping, Shu / Yin, Jie / Huang, Jun-jie / Liu, Dan / Xie, Gui-hua	Analysis of parameters and influence factors on a piezoresistance model of CFRP materials	546-553
González-Taboada, Iris / González-Fonteboa, Belén / Martínez-Abella, Fernando / Seara-Paz, Sindy	Analysis of rheological behaviour of self-compacting concrete made with recycled aggregates	18-25
Qu, Bo / Weng, Xiong-zhong / Zhang, Jun / Mei, Jun-jie / Guo, Tian-xiong / Li, Ruo-fei / An, Shu-hua	Analysis on the deflection and load transfer capacity of a prefabricated airport prestressed concrete pavement	449-458
Chen, Shih-Huang / Lin, Deng-Fong / Luo, Huan-Lin / Lin, Zi-Yang	Application of reclaimed basic oxygen furnace slag asphalt pavement in road base aggregate	647-653
Wang, Bo / Wang, Peng / Chen, Yishun / Zhou, Jiannan / Kong, Xinli / Wu, Hao / Fan, Hualin / Jin, Fengnian	Blast responses of CFRP strengthened autoclaved aerated cellular concrete panels	226-236
Magalhães, Margareth da Silva / Faleschini, Flora / Pellegrino, Carlo / Brunelli, Katya	Cementing efficiency of electric arc furnace dust in mortars	141-150
Ho, Chih-Husan / Lo, Huang-Mu / Lin, Kae-Long / Lan, Ju-Ying	Characteristics of water-retaining porous ceramics with sandblasting waste	75-82
Ríos-Parada, Venustiano / Jiménez-Quero, Víctor Guillermo / Valdez-Tamez, Pedro Leobardo / Montes-Garcia, Pedro	Characterization and use of an untreated Mexican sugarcane bagasse ash as supplementary material for the preparation of ternary concretes	83-95
Wang, Lei / Zhang, Fu-Shen	Characterization of a novel sound absorption material derived from waste agricultural film	237-243
Aydin, Ertug / Arel, Hasan Şahan	Characterization of high-volume fly-ash cement pastes for sustainable construction applications	96-107
Kappel, Annemette / Ottosen, Lisbeth M. / Kirkelund, Gunvor M.	Colour, compressive strength and workability of mortars with an iron rich sewage sludge ash	1199-1205
Li, L. G. / Zhu, J. / Huang, Z. H. / Kwan, A. K. H. / Li, L. J.	Combined effects of micro-silica and nano-silica on durability of mortar	337-347
Kurda, Rawaz / de Brito, Jorge / Silvestre, José D.	Combined influence of recycled concrete aggregates and high contents of fly ash on concrete properties	554-572
Feng, Guyu / Wang, Xinyue / Zhang, Diantang / Cao, Haijian / Qian, Kun / Xiao, Xueliang	A comparative study on mechanical properties of surface modified polypropylene (PP) fabric reinforced concrete composites	372-381
Li, Jingjun / Niu, Jiangang / Wan, Chaojun / Liu, Xiaoqin / Jin, Zhiyi	Comparison of flexural property between high performance polypropylene fiber reinforced lightweight aggregate concrete and steel fiber reinforced lightweight aggregate concrete	729-736
Singh, Dharamveer / Chitragar, Srinivas F. / Ashish, Prabin Kumar	Comparison of moisture and fracture damage resistance of hot and warm asphalt mixes containing reclaimed pavement materials	1145-1153
Ben Fraj, Amor / Idir, Rachida	Concrete based on recycled aggregates – Recycling and environmental analysis: A case study of paris' region	952-964
Díaz de Terán, José Ramón / Haach, Vladimir G.	Crack opening prediction at casting joints with a new modified stress-strain law for embedded reinforcement	668-675
Khan, M. I. / Abbas, Y. M.	Curing optimization for strength and durability of silica fume and fuel ash concretes under hot weather conditions	1092-1105
Gopalakrishnan, Kasthurirangan / Khaitan, Siddhartha K. / Choudhary, Alok / Agrawal, Ankit	Deep Convolutional Neural Networks with transfer learning for computer vision-based data-driven pavement distress detection	322-330
Wu, Guangshun / Ma, Lichun / Jiang, Hua / Liu, Li	Directly grafting octa(aminophenyl) polyhedral oligomeric silsesquioxane onto carbon fibers for superior interfacial strength and hydrothermal aging resistance of silicone resin composites	1040-1046
Massaad, Georges / Roziere, Emmanuel / Loukili, Ahmed / Izoret, Laurent	Do the geometry and aggregates size influence external sulfate attack mechanism?	778-789
Othman, H. / Marzouk, H.	Dynamic identification of damage control characteristics of ultra-high performance fiber reinforced concrete	899-908
Drolet, C. / Duchesne, J. / Fournier, B.	Effect of alkali release by aggregates on alkali-silica reaction	263-276
Ducasse-Lapeyrusse, Jean / Gagné, Richard / Lors, Christine / Damidot, Denis	Effect of calcium gluconate, calcium lactate, and urea on the kinetics of self-healing in mortars	489-497
Heydariha, Jamshid Zohreh / Das, Sreekanta / Banting, Bennett	Effect of grout strength and block size on the performance of masonry beam	685-693
Ashrafi, Hamed / Bazli, Milad / Najafabadi, Esmaeil Pournamazian / Oskouei, Asghar Vatani	The effect of mechanical and thermal properties of FRP bars on their tensile performance under elevated temperatures	1001-1010
Han, Lili / Zheng, Mulian / Li, Jinglong / Li, Yifeng / Zhu, Yueming / Ma, Qiang	Effect of nano silica and pretreated rubber on the properties of terminal blend crumb rubber modified asphalt	277-291
Xiao, Huawen / Wang, Wei / Goh, Siang Huat	Effectiveness study for fly ash cement improved marine clay	1053-1064
Arel, Hasan Şahan / Aydin, Ertug	Effects of Ca-, Mg-, K-, and Na-lignosulfonates on the behavior of fresh concrete	1084-1091
Ma, Cong / Xie, Youjun / Long, Guangcheng / Chen, Bing / Chen, Longzhu	Effects of fly ash on mechanical and physical properties of earth-based construction	1074-1083
Li, L. G. / Lin, C. J. / Chen, G. M. / Kwan, A. K. H. / Jiang, T.	Effects of packing on compressive behaviour of recycled aggregate concrete	757-777
Lin, Kun / Liu, Hongjun / Wei, Chunli / Huang, Qin	Effects of shear rate on cyclic behavior of dry stack masonry joint	809-817
Zhang, Xiaowei / He, Yan / Lu, Chunxia / Huang, Zhou	Effects of sodium gluconate on early hydration and mortar performance of Portland cement-calcium aluminate cement-anhydrite binder	1065-1073
López-Zaldívar, O. / Lozano-Díez, R. V. / Verdú-Vázquez, A. / Llauradó-Pérez, N.	Effects of the addition of inertized MSW fly ash on calcium aluminate cement mortars	1106-1116
Souza, M. T. / Maykot, C. K. / Araújo, A. C. Z. / Raupp-Pereira, F. / Novaes de Oliveira, A. P.	Electrolytes' influence on foamability and foam stability of cement suspensions	363-371
Consoli, Nilo Cesar / Saldanha, Rodrigo Beck / Mallmann, José Eduardo Corrêa / de Paula, Thaís Martins / Hoch, Bruna Zakharia	Enhancement of strength of coal fly ash–carbide lime blends through chemical and mechanical activation	65-74
Riccardi, C. / Cannone Falchetto, A. / Losa, M. / Leandri, P.	Estimation of the SHStS transformation parameter based on volumetric composition	244-252
Gadri, Karima / Guettala, Abdelhamid	Evaluation of bond strength between sand concrete as new repair material and ordinary concrete substrate (The surface roughness effect)	1133-1144
Li, Yue / Wang, Peng / Wang, Zigeng	Evaluation of elastic modulus of cement paste corroded in bring solution with advanced homogenization method	600-609
Fakhri, Mansour / Ahmadi, Amin	Evaluation of fracture resistance of asphalt mixes involving steel slag and RAP: Susceptibility to aging level and freeze and thaw cycles	748-756
Mohajerani, Abbas / Ashdown, Matthew / Abdihashi, Luqmaan / Nazem, Majidreza	Expanded polystyrene geofoam in pavement construction	438-448
El-Zohairy, Ayman / Salim, Hani / Shaaban, Hesham / Mustafa, Suzan / El-Shihy, Ashraf	Experimental and FE parametric study on continuous steel-concrete composite beams strengthened with CFRP laminates	885-898
Kim, Gyu-Jin / Park, Sun-Jong / Kwak, Hyo-Gyoung	Experimental characterization of ultrasonic nonlinearity in concrete under cyclic change of prestressing force using Nonlinear Resonant Ultrasonic Spectroscopy	700-707
Yuan, Ming / Yan, Donghuang / Zhong, Hao / Liu, Yongming	Experimental investigation of high-cycle fatigue behavior for prestressed concrete box-girders	424-437
Morafa, Seyed Hasan / Saesaei, Amir Hossein / Mahdizadeh Gohari, Omid / Heidari Afshar, Mohamad Javad	An experimental investigation on applying the recycled aggregates obtained from oil contaminated concrete exposed to seawater as road unbound pavement materials	292-299
Li, Zhong-Xian / Li, Chang-Hui / Shi, Yun-Dong / Zhou, Xiao-Jie	Experimental investigation on mechanical properties of Hybrid Fibre Reinforced Concrete	930-942
Lv, Jing / Zhou, Tianhua / Du, Qiang / Wu, Hanheng	Experimental investigation on properties of gypsum-quicklime-soil grout material in the reparation of earthen site cracks	253-262
Jiang, Zhengwu / Qian, Chen / Chen, Qing	Experimental investigation on the volume stability of magnesium phosphate cement with different types of mineral admixtures	10-17
Ding, Xunhao / Ma, Tao / Zhang, Weiguang / Zhang, Deyu	Experimental study of stable crumb rubber asphalt and asphalt mixture	975-981
Džunuzović, N. / Komljenović, M. / Nikolić, V. / Ivanović, T.	External sulfate attack on alkali-activated fly ash-blast furnace slag composite	737-747
Amin, Sh. K. / EL-Sherbiny, S. A. / El-Magd, A. A. M. Abo / Belal, A. / Abadir, M. F.	Fabrication of geopolymer bricks using ceramic dust waste	610-620
Liu, Guoqiang / Jia, Yanshun / Yang, Tao / Du, Hui / Zhang, Jiupeng / Zhao, Yongli	Fatigue performance evaluation of asphalt mixtures based on energy-controlled loading mode	348-356
Pasandín, A. R. / Pérez, I.	Fatigue performance of bituminous mixtures made with recycled concrete aggregates and waste tire rubber	26-33
Younes, Taha / Al-Mayah, Adil / Topper, Tim	Fatigue performance of prestressed concrete beams using BFRP bars	313-321
Malkapur, Santhosh M. / Divakar, L. / Narasimhan, Mattur C. / Karkera, Narayana B. / Goverdhan, P. / Sathian, V. / Prasad, N. K.	Fresh and hardened properties of polymer incorporated self compacting concrete mixes for neutron radiation shielding	917-929
Antunes Boca Santa, Rozineide A. / Soares, Cíntia / Gracher Riella, Humberto	Geopolymers obtained from bottom ash as source of aluminosilicate cured at room temperature	459-466
Ogrodnik, Paweł / Szulej, Jacek	The impact of aeration of concrete based on ceramic aggregate, exposed to high temperatures, on its strength parameters	909-916
Sogbossi, Hognon / Verdier, Jérôme / Multon, Stéphane	Impact of reinforcement-concrete interfaces and cracking on gas transfer in concrete	521-533
Ding, Ling / Poursaee, Amir	The impact of sandblasting as a surface modification method on the corrosion behavior of steels in simulated concrete pore solution	591-599
Fabbri, Antonin / McGregor, Fionn	Impact of the determination of the sorption-desorption curves on the prediction of the hemp concrete hygrothermal behaviour	108-116
Fraile-Garcia, Esteban / Ferreiro-Cabello, Javier / Martinez de Pison Ascacibar, Eduardo / Fernandez Ceniceros, Julio / Pernía Espinoza, Alpha Verónica	Implementing a technically and economically viable system for recording data inside concrete	860-872
Rezvani, Moien / Proske, Tilo	Influence of chemical-mineralogical properties of limestone on the shrinkage behaviour of cement paste and concrete made of limestone-rich cements	818-828
Chen, Xuemei / Gao, Jianming / Yan, Yun / Liu, Yuanzheng	Investigation of expansion properties of cement paste with circulating fluidized bed fly ash	1154-1162
Wu, Y. T.	Low-temperature rheological behavior of ultraviolet irradiation aged matrix asphalt and rubber asphalt binders	708-717
Kim, Min-Jae / Kim, Soonho / Lee, Seul-Kee / Kim, Jun-Hwi / Lee, Kangwon / Yoo, Doo-Yeol	Mechanical properties of ultra-high-performance fiber-reinforced concrete at cryogenic temperatures	498-508
Wang, Zhao / Gong, Fuyuan / Zhang, Dawei / Hayashida, Hiroshi / Ueda, Tamon	Mesoscale simulation of concrete behavior with non-uniform frost damage with verification by CT imaging	203-213
Zhou, Wei / Zhao, Cheng / Liu, Xinghong / Chang, Xiaolin / Feng, Chuqiao	Mesoscopic simulation of thermo-mechanical behaviors in concrete under frost action	117-131
Li, Jingjun / Chen, Yuanhang / Wan, Chaojun	A mix-design method for lightweight aggregate self-compacting concrete based on packing and mortar film thickness theories	621-634
Samieadel, Alireza / Oldham, Daniel / Fini, Elham H.	Multi-scale characterization of the effect of wax on intermolecular interactions in asphalt binder	1163-1172
Alghamdi, Abdulrahman A. / Alharthi, Hamzah A.	Multiscale 3D finite-element modelling of the thermal conductivity of clay brick walls	1-9
Motahari Karein, S. Mahmoud / Ramezanianpour, A. A. / Ebadi, Taghi / Isapour, Soroush / Karakouzian, Moses	A new approach for application of silica fume in concrete: Wet granulation	573-581
Liu, Ming / Wu, Yiqiang / Wan, Hui	A new concept of wood bonding design for strength enhanced southern yellow pine wood products	694-699
Li, Sheng / Yang, Fan / Liu, Zhaohui	A new structure for continuously reinforced concrete pavement with road performance evaluation	1047-1052
Zhang, Xiaoyuan / Gu, Xingyu / Lv, Junxiu / Zhu, Zongkai / Zou, Xiaoyong	Numerical analysis of the rheological behaviors of basalt fiber reinforced asphalt mortar using ABAQUS	392-401
Hong, Yi / Li, Zuohua / Qiao, Guofu / Ou, Jinping	Numerical simulation and experimental investigation of the stray current corrosion of viaducts in the high-speed rail transit system	416-423
Gong, Jianqing / Deng, Guoqi / Shan, Bo	Performance evaluation of RPC exposed to high temperature combining ultrasonic test: A case study	194-202
Sadek, Dina M. / El-Attar, Mohamed M. / Ali, Ahmed M.	Physico-mechanical and durability characteristics of concrete paving blocks incorporating cement kiln dust	300-312
Machner, Alisa / Zajac, Maciej / Ben Haha, Mohsen / Kjellsen, Knut O. / Geiker, Mette R. / De Weerdt, Klaartje	Portland metakaolin cement containing dolomite or limestone – Similarities and differences in phase assemblage and compressive strength	214-225
Huang, Yuner / Young, Ben	Post-fire behaviour of ferritic stainless steel material	654-667
Ding, Haibo / Tetteh, Nathaniel / Hesp, Simon A. M.	Preliminary experience with improved asphalt cement specifications in the City of Kingston, Ontario, Canada	467-475
Zhang, Bingliu / Tan, Hongbo / Ma, Baoguo / Chen, Fangjie / Lv, Zhenghang / Li, Xin	Preparation and application of fine-grinded cement in cement-based material	34-41
Yu, Yanglun / Liu, Ru / Huang, Yuxiang / Meng, Fandan / Yu, Wenji	Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber	1032-1039
Deboodt, Tyler / Ideker, Jason H. / Isgor, O. Burkan / Wildenschild, Dorthe	Quantification of synthesized hydration products using synchrotron microtomography and spectral analysis	476-488
Martínez-Barrera, Gonzalo / Martínez-López, Miguel / González-Rivas, Nelly / del Coz-Diaz, Juan Jose / Ávila-Córdoba, Liliana / Reis, João Marciano Laredo dos / Gencel, Osman	Recycled cellulose from Tetra Pak packaging as reinforcement of polyester based composites	1018-1023
Sonat, C. / Lim, C. H. / Liska, M. / Unluer, C.	Recycling and reuse of reactive MgO cements – A feasibility study	172-181
Sol-Sánchez, M. / D'Angelo, G.	Review of the design and maintenance technologies used to decelerate the deterioration of ballasted railway tracks	402-415
Yaseri, Sajad / Hajiaghaei, Ghazal / Mohammadi, Farnaz / Mahdikhani, Mahdi / Farokhzad, Reza	The role of synthesis parameters on the workability, setting and strength properties of binary binder based geopolymer paste	534-545
Manzi, Stefania / Mazzotti, Claudio / Bignozzi, Maria Chiara	Self-compacting concrete with recycled concrete aggregate: Study of the long-term properties	582-590
Alghazali, Hayder H. / Myers, John J.	Shear behavior of full-scale high volume fly ash-self consolidating concrete (HVFA-SCC) beams	161-171
Pansuk, Withit / Nguyen, Thuc N. / Sato, Yasushiko / den Uijl, J. A. / Walraven, J. C.	Shear capacity of high performance fiber reinforced concrete I-beams	182-193
Li, X. / Grasley, Z. C. / Garboczi, E. J. / Bullard, J. W.	Simulation of the influence of intrinsic C-S-H aging on time-dependent relaxation of hydrating cement paste	1024-1031
Małyszko, Leszek / Kowalska, Edyta / Bilko, Piotr	Splitting tensile behavior of autoclaved aerated concrete: Comparison of different specimens' results	1190-1198
Canestrari, Francesco / Ingrassia, Lorenzo Paolo / Ferrotti, Gilda / Lu, Xiaohu	State of the art of tribological tests for bituminous binders	718-728
Gill, Anhad Singh / Siddique, Rafat	Strength and micro-structural properties of self-compacting concrete containing metakaolin and rice husk ash	51-64
Behnood, Ali / Olek, Jan	Stress-dependent behavior and rutting resistance of modified asphalt binders: An MSCR approach	635-646
Nugroho, Naresworo / Bahtiar, Effendi Tri	Structural grading of Gigantochloa apus bamboo based on its flexural properties	1173-1189
Liu, Guojian / Zhang, Yunsheng / Wu, Meng / Huang, Ran	Study of depassivation of carbon steel in simulated concrete pore solution using different equivalent circuits	357-362
Robayo-Salazar, Rafael Andres / de Gutiérrez, Mejía / Puertas, Francisca	Study of synergy between a natural volcanic pozzolan and a granulated blast furnace slag in the production of geopolymeric pastes and mortars	151-160
Hesami, Ebrahim / Mehdizadeh, Gholamreza	Study of the amine-based liquid anti-stripping agents by simulating hot mix asphalt plant production process	1011-1017
Sun, Lijian / Guo, Hongchao / Liu, YunHe	Study on seismic behavior of steel frame with external hanging concrete walls containing recycled aggregates	790-808
Li, Xin / Lin, Xujian / Lin, Kui / Ji, Tao	Study on the degradation mechanism of sulphoaluminate cement sea sand concrete eroded by biological sulfuric acid	331-336
Li, Guoxin / Zhang, Ai / Song, Zhanping / Shi, Chen / Wang, Yan / Zhang, Junjie	Study on the resistance to seawater corrosion of the cementitious systems containing ordinary Portland cement or/and calcium aluminate cement	852-859
Zaidi, Syed Farrukh Alam / Ul Haq, Ehsan / Nur, Khushnuda / Ejaz, Noveed / Anis-ur-Rehman, M. / Zubair, Muhammad / Naveed, Muhammad	Synthesis & characterization of natural soil based inorganic polymer foam for thermal insulations	994-1000
Li, Xiuling / Bao, Yi / Wu, Lele / Yan, Qingxi / Ma, Hongyan / Chen, Genda / Zhang, Huining	Thermal and mechanical properties of high-performance fiber-reinforced cementitious composites after exposure to high temperatures	829-838
Senise, S. / Carrera, V. / Navarro, F. J. / Partal, P.	Thermomechanical and microstructural evaluation of hybrid rubberised bitumen containing a thermoplastic polymer	873-884
Samson, Gabriel / Cyr, Martin / Gao, Xiao Xiao	Thermomechanical performance of blended metakaolin-GGBS alkali-activated foam concrete	982-993
Shao, Wei / Shi, Danda / Jiang, Jianping / Chen, Youliang	Time-dependent lateral bearing behaviour of corrosion-damaged RC pipe piles in marine environments	676-684
Ling, Meng / Luo, Xue / Gu, Fan / Lytton, Robert L.	Time-temperature-aging-depth shift functions for dynamic modulus master curves of asphalt mixtures	943-951
Marastoni, Diego / Benedetti, Andrea / Pelà, Luca / Pignagnoli, Giacomo	Torque Penetrometric Test for the in-situ characterisation of historical mortars: fracture mechanics interpretation and experimental validation	509-520
Khalil, Noura / Aouad, Georges / El Cheikh, Khadija / Remond, Sébastien	Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars	382-391
Sadeghnejad, Mostafa / Shafabakhsh, GholamAli	Use of Nano SiO 2 and Nano TiO 2 to improve the mechanical behaviour of stone mastic asphalt mixtures	965-974
Lim, S. / Lee, W. / Choo, H. / Lee, C.	Utilization of high carbon fly ash and copper slag in electrically conductive controlled low strength material	42-50

About this
data sheet
IssueID
22653
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.