Construction and Building Materials - décembre 2017

Publié:	décembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Chen, Yuxuan / Yu, Q. L. / Brouwers, H. J. H.	Acoustic performance and microstructural analysis of bio-based lightweight concrete containing miscanthus	839-851
Velay-Lizancos, Mirian / Azenha, Miguel / Martínez-Lage, Isabel / Vazquez-Burgo, Pablo	Addition of biomass ash in concrete: Effects on E-Modulus, electrical conductivity at early ages and their correlation	1126-1132
Veiga, Rosário	Air lime mortars: What else do we need to know to apply them in conservation and rehabilitation interventions? A review	132-140
Liu, Rong-gui / Ping, Shu / Yin, Jie / Huang, Jun-jie / Liu, Dan / Xie, Gui-hua	Analysis of parameters and influence factors on a piezoresistance model of CFRP materials	546-553
González-Taboada, Iris / González-Fonteboa, Belén / Martínez-Abella, Fernando / Seara-Paz, Sindy	Analysis of rheological behaviour of self-compacting concrete made with recycled aggregates	18-25
Qu, Bo / Weng, Xiong-zhong / Zhang, Jun / Mei, Jun-jie / Guo, Tian-xiong / Li, Ruo-fei / An, Shu-hua	Analysis on the deflection and load transfer capacity of a prefabricated airport prestressed concrete pavement	449-458
Chen, Shih-Huang / Lin, Deng-Fong / Luo, Huan-Lin / Lin, Zi-Yang	Application of reclaimed basic oxygen furnace slag asphalt pavement in road base aggregate	647-653
Wang, Bo / Wang, Peng / Chen, Yishun / Zhou, Jiannan / Kong, Xinli / Wu, Hao / Fan, Hualin / Jin, Fengnian	Blast responses of CFRP strengthened autoclaved aerated cellular concrete panels	226-236
Magalhães, Margareth da Silva / Faleschini, Flora / Pellegrino, Carlo / Brunelli, Katya	Cementing efficiency of electric arc furnace dust in mortars	141-150
Ho, Chih-Husan / Lo, Huang-Mu / Lin, Kae-Long / Lan, Ju-Ying	Characteristics of water-retaining porous ceramics with sandblasting waste	75-82
Ríos-Parada, Venustiano / Jiménez-Quero, Víctor Guillermo / Valdez-Tamez, Pedro Leobardo / Montes-Garcia, Pedro	Characterization and use of an untreated Mexican sugarcane bagasse ash as supplementary material for the preparation of ternary concretes	83-95
Wang, Lei / Zhang, Fu-Shen	Characterization of a novel sound absorption material derived from waste agricultural film	237-243
Aydin, Ertug / Arel, Hasan Şahan	Characterization of high-volume fly-ash cement pastes for sustainable construction applications	96-107
Kappel, Annemette / Ottosen, Lisbeth M. / Kirkelund, Gunvor M.	Colour, compressive strength and workability of mortars with an iron rich sewage sludge ash	1199-1205
Li, L. G. / Zhu, J. / Huang, Z. H. / Kwan, A. K. H. / Li, L. J.	Combined effects of micro-silica and nano-silica on durability of mortar	337-347
Kurda, Rawaz / de Brito, Jorge / Silvestre, José D.	Combined influence of recycled concrete aggregates and high contents of fly ash on concrete properties	554-572
Feng, Guyu / Wang, Xinyue / Zhang, Diantang / Cao, Haijian / Qian, Kun / Xiao, Xueliang	A comparative study on mechanical properties of surface modified polypropylene (PP) fabric reinforced concrete composites	372-381
Li, Jingjun / Niu, Jiangang / Wan, Chaojun / Liu, Xiaoqin / Jin, Zhiyi	Comparison of flexural property between high performance polypropylene fiber reinforced lightweight aggregate concrete and steel fiber reinforced lightweight aggregate concrete	729-736
Singh, Dharamveer / Chitragar, Srinivas F. / Ashish, Prabin Kumar	Comparison of moisture and fracture damage resistance of hot and warm asphalt mixes containing reclaimed pavement materials	1145-1153
Ben Fraj, Amor / Idir, Rachida	Concrete based on recycled aggregates – Recycling and environmental analysis: A case study of paris' region	952-964
Díaz de Terán, José Ramón / Haach, Vladimir G.	Crack opening prediction at casting joints with a new modified stress-strain law for embedded reinforcement	668-675
Khan, M. I. / Abbas, Y. M.	Curing optimization for strength and durability of silica fume and fuel ash concretes under hot weather conditions	1092-1105
Gopalakrishnan, Kasthurirangan / Khaitan, Siddhartha K. / Choudhary, Alok / Agrawal, Ankit	Deep Convolutional Neural Networks with transfer learning for computer vision-based data-driven pavement distress detection	322-330
Wu, Guangshun / Ma, Lichun / Jiang, Hua / Liu, Li	Directly grafting octa(aminophenyl) polyhedral oligomeric silsesquioxane onto carbon fibers for superior interfacial strength and hydrothermal aging resistance of silicone resin composites	1040-1046
Massaad, Georges / Roziere, Emmanuel / Loukili, Ahmed / Izoret, Laurent	Do the geometry and aggregates size influence external sulfate attack mechanism?	778-789
Othman, H. / Marzouk, H.	Dynamic identification of damage control characteristics of ultra-high performance fiber reinforced concrete	899-908
Drolet, C. / Duchesne, J. / Fournier, B.	Effect of alkali release by aggregates on alkali-silica reaction	263-276
Ducasse-Lapeyrusse, Jean / Gagné, Richard / Lors, Christine / Damidot, Denis	Effect of calcium gluconate, calcium lactate, and urea on the kinetics of self-healing in mortars	489-497
Heydariha, Jamshid Zohreh / Das, Sreekanta / Banting, Bennett	Effect of grout strength and block size on the performance of masonry beam	685-693
Ashrafi, Hamed / Bazli, Milad / Najafabadi, Esmaeil Pournamazian / Oskouei, Asghar Vatani	The effect of mechanical and thermal properties of FRP bars on their tensile performance under elevated temperatures	1001-1010
Han, Lili / Zheng, Mulian / Li, Jinglong / Li, Yifeng / Zhu, Yueming / Ma, Qiang	Effect of nano silica and pretreated rubber on the properties of terminal blend crumb rubber modified asphalt	277-291
Xiao, Huawen / Wang, Wei / Goh, Siang Huat	Effectiveness study for fly ash cement improved marine clay	1053-1064
Arel, Hasan Şahan / Aydin, Ertug	Effects of Ca-, Mg-, K-, and Na-lignosulfonates on the behavior of fresh concrete	1084-1091
Ma, Cong / Xie, Youjun / Long, Guangcheng / Chen, Bing / Chen, Longzhu	Effects of fly ash on mechanical and physical properties of earth-based construction	1074-1083
Li, L. G. / Lin, C. J. / Chen, G. M. / Kwan, A. K. H. / Jiang, T.	Effects of packing on compressive behaviour of recycled aggregate concrete	757-777
Lin, Kun / Liu, Hongjun / Wei, Chunli / Huang, Qin	Effects of shear rate on cyclic behavior of dry stack masonry joint	809-817
Zhang, Xiaowei / He, Yan / Lu, Chunxia / Huang, Zhou	Effects of sodium gluconate on early hydration and mortar performance of Portland cement-calcium aluminate cement-anhydrite binder	1065-1073
López-Zaldívar, O. / Lozano-Díez, R. V. / Verdú-Vázquez, A. / Llauradó-Pérez, N.	Effects of the addition of inertized MSW fly ash on calcium aluminate cement mortars	1106-1116
Souza, M. T. / Maykot, C. K. / Araújo, A. C. Z. / Raupp-Pereira, F. / Novaes de Oliveira, A. P.	Electrolytes' influence on foamability and foam stability of cement suspensions	363-371
Consoli, Nilo Cesar / Saldanha, Rodrigo Beck / Mallmann, José Eduardo Corrêa / de Paula, Thaís Martins / Hoch, Bruna Zakharia	Enhancement of strength of coal fly ash–carbide lime blends through chemical and mechanical activation	65-74
Riccardi, C. / Cannone Falchetto, A. / Losa, M. / Leandri, P.	Estimation of the SHStS transformation parameter based on volumetric composition	244-252
Gadri, Karima / Guettala, Abdelhamid	Evaluation of bond strength between sand concrete as new repair material and ordinary concrete substrate (The surface roughness effect)	1133-1144
Li, Yue / Wang, Peng / Wang, Zigeng	Evaluation of elastic modulus of cement paste corroded in bring solution with advanced homogenization method	600-609
Fakhri, Mansour / Ahmadi, Amin	Evaluation of fracture resistance of asphalt mixes involving steel slag and RAP: Susceptibility to aging level and freeze and thaw cycles	748-756
Mohajerani, Abbas / Ashdown, Matthew / Abdihashi, Luqmaan / Nazem, Majidreza	Expanded polystyrene geofoam in pavement construction	438-448
El-Zohairy, Ayman / Salim, Hani / Shaaban, Hesham / Mustafa, Suzan / El-Shihy, Ashraf	Experimental and FE parametric study on continuous steel-concrete composite beams strengthened with CFRP laminates	885-898
Kim, Gyu-Jin / Park, Sun-Jong / Kwak, Hyo-Gyoung	Experimental characterization of ultrasonic nonlinearity in concrete under cyclic change of prestressing force using Nonlinear Resonant Ultrasonic Spectroscopy	700-707
Yuan, Ming / Yan, Donghuang / Zhong, Hao / Liu, Yongming	Experimental investigation of high-cycle fatigue behavior for prestressed concrete box-girders	424-437
Morafa, Seyed Hasan / Saesaei, Amir Hossein / Mahdizadeh Gohari, Omid / Heidari Afshar, Mohamad Javad	An experimental investigation on applying the recycled aggregates obtained from oil contaminated concrete exposed to seawater as road unbound pavement materials	292-299
Li, Zhong-Xian / Li, Chang-Hui / Shi, Yun-Dong / Zhou, Xiao-Jie	Experimental investigation on mechanical properties of Hybrid Fibre Reinforced Concrete	930-942
Lv, Jing / Zhou, Tianhua / Du, Qiang / Wu, Hanheng	Experimental investigation on properties of gypsum-quicklime-soil grout material in the reparation of earthen site cracks	253-262
Jiang, Zhengwu / Qian, Chen / Chen, Qing	Experimental investigation on the volume stability of magnesium phosphate cement with different types of mineral admixtures	10-17
Ding, Xunhao / Ma, Tao / Zhang, Weiguang / Zhang, Deyu	Experimental study of stable crumb rubber asphalt and asphalt mixture	975-981
Džunuzović, N. / Komljenović, M. / Nikolić, V. / Ivanović, T.	External sulfate attack on alkali-activated fly ash-blast furnace slag composite	737-747
Amin, Sh. K. / EL-Sherbiny, S. A. / El-Magd, A. A. M. Abo / Belal, A. / Abadir, M. F.	Fabrication of geopolymer bricks using ceramic dust waste	610-620
Liu, Guoqiang / Jia, Yanshun / Yang, Tao / Du, Hui / Zhang, Jiupeng / Zhao, Yongli	Fatigue performance evaluation of asphalt mixtures based on energy-controlled loading mode	348-356
Pasandín, A. R. / Pérez, I.	Fatigue performance of bituminous mixtures made with recycled concrete aggregates and waste tire rubber	26-33
Younes, Taha / Al-Mayah, Adil / Topper, Tim	Fatigue performance of prestressed concrete beams using BFRP bars	313-321
Malkapur, Santhosh M. / Divakar, L. / Narasimhan, Mattur C. / Karkera, Narayana B. / Goverdhan, P. / Sathian, V. / Prasad, N. K.	Fresh and hardened properties of polymer incorporated self compacting concrete mixes for neutron radiation shielding	917-929
Antunes Boca Santa, Rozineide A. / Soares, Cíntia / Gracher Riella, Humberto	Geopolymers obtained from bottom ash as source of aluminosilicate cured at room temperature	459-466
Ogrodnik, Paweł / Szulej, Jacek	The impact of aeration of concrete based on ceramic aggregate, exposed to high temperatures, on its strength parameters	909-916
Sogbossi, Hognon / Verdier, Jérôme / Multon, Stéphane	Impact of reinforcement-concrete interfaces and cracking on gas transfer in concrete	521-533
Ding, Ling / Poursaee, Amir	The impact of sandblasting as a surface modification method on the corrosion behavior of steels in simulated concrete pore solution	591-599
Fabbri, Antonin / McGregor, Fionn	Impact of the determination of the sorption-desorption curves on the prediction of the hemp concrete hygrothermal behaviour	108-116
Fraile-Garcia, Esteban / Ferreiro-Cabello, Javier / Martinez de Pison Ascacibar, Eduardo / Fernandez Ceniceros, Julio / Pernía Espinoza, Alpha Verónica	Implementing a technically and economically viable system for recording data inside concrete	860-872
Rezvani, Moien / Proske, Tilo	Influence of chemical-mineralogical properties of limestone on the shrinkage behaviour of cement paste and concrete made of limestone-rich cements	818-828
Chen, Xuemei / Gao, Jianming / Yan, Yun / Liu, Yuanzheng	Investigation of expansion properties of cement paste with circulating fluidized bed fly ash	1154-1162
Wu, Y. T.	Low-temperature rheological behavior of ultraviolet irradiation aged matrix asphalt and rubber asphalt binders	708-717
Kim, Min-Jae / Kim, Soonho / Lee, Seul-Kee / Kim, Jun-Hwi / Lee, Kangwon / Yoo, Doo-Yeol	Mechanical properties of ultra-high-performance fiber-reinforced concrete at cryogenic temperatures	498-508
Wang, Zhao / Gong, Fuyuan / Zhang, Dawei / Hayashida, Hiroshi / Ueda, Tamon	Mesoscale simulation of concrete behavior with non-uniform frost damage with verification by CT imaging	203-213
Zhou, Wei / Zhao, Cheng / Liu, Xinghong / Chang, Xiaolin / Feng, Chuqiao	Mesoscopic simulation of thermo-mechanical behaviors in concrete under frost action	117-131
Li, Jingjun / Chen, Yuanhang / Wan, Chaojun	A mix-design method for lightweight aggregate self-compacting concrete based on packing and mortar film thickness theories	621-634
Samieadel, Alireza / Oldham, Daniel / Fini, Elham H.	Multi-scale characterization of the effect of wax on intermolecular interactions in asphalt binder	1163-1172
Alghamdi, Abdulrahman A. / Alharthi, Hamzah A.	Multiscale 3D finite-element modelling of the thermal conductivity of clay brick walls	1-9
Motahari Karein, S. Mahmoud / Ramezanianpour, A. A. / Ebadi, Taghi / Isapour, Soroush / Karakouzian, Moses	A new approach for application of silica fume in concrete: Wet granulation	573-581
Liu, Ming / Wu, Yiqiang / Wan, Hui	A new concept of wood bonding design for strength enhanced southern yellow pine wood products	694-699
Li, Sheng / Yang, Fan / Liu, Zhaohui	A new structure for continuously reinforced concrete pavement with road performance evaluation	1047-1052
Zhang, Xiaoyuan / Gu, Xingyu / Lv, Junxiu / Zhu, Zongkai / Zou, Xiaoyong	Numerical analysis of the rheological behaviors of basalt fiber reinforced asphalt mortar using ABAQUS	392-401
Hong, Yi / Li, Zuohua / Qiao, Guofu / Ou, Jinping	Numerical simulation and experimental investigation of the stray current corrosion of viaducts in the high-speed rail transit system	416-423
Gong, Jianqing / Deng, Guoqi / Shan, Bo	Performance evaluation of RPC exposed to high temperature combining ultrasonic test: A case study	194-202
Sadek, Dina M. / El-Attar, Mohamed M. / Ali, Ahmed M.	Physico-mechanical and durability characteristics of concrete paving blocks incorporating cement kiln dust	300-312
Machner, Alisa / Zajac, Maciej / Ben Haha, Mohsen / Kjellsen, Knut O. / Geiker, Mette R. / De Weerdt, Klaartje	Portland metakaolin cement containing dolomite or limestone – Similarities and differences in phase assemblage and compressive strength	214-225
Huang, Yuner / Young, Ben	Post-fire behaviour of ferritic stainless steel material	654-667
Ding, Haibo / Tetteh, Nathaniel / Hesp, Simon A. M.	Preliminary experience with improved asphalt cement specifications in the City of Kingston, Ontario, Canada	467-475
Zhang, Bingliu / Tan, Hongbo / Ma, Baoguo / Chen, Fangjie / Lv, Zhenghang / Li, Xin	Preparation and application of fine-grinded cement in cement-based material	34-41
Yu, Yanglun / Liu, Ru / Huang, Yuxiang / Meng, Fandan / Yu, Wenji	Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber	1032-1039
Deboodt, Tyler / Ideker, Jason H. / Isgor, O. Burkan / Wildenschild, Dorthe	Quantification of synthesized hydration products using synchrotron microtomography and spectral analysis	476-488
Martínez-Barrera, Gonzalo / Martínez-López, Miguel / González-Rivas, Nelly / del Coz-Diaz, Juan Jose / Ávila-Córdoba, Liliana / Reis, João Marciano Laredo dos / Gencel, Osman	Recycled cellulose from Tetra Pak packaging as reinforcement of polyester based composites	1018-1023
Sonat, C. / Lim, C. H. / Liska, M. / Unluer, C.	Recycling and reuse of reactive MgO cements – A feasibility study	172-181
Sol-Sánchez, M. / D'Angelo, G.	Review of the design and maintenance technologies used to decelerate the deterioration of ballasted railway tracks	402-415
Yaseri, Sajad / Hajiaghaei, Ghazal / Mohammadi, Farnaz / Mahdikhani, Mahdi / Farokhzad, Reza	The role of synthesis parameters on the workability, setting and strength properties of binary binder based geopolymer paste	534-545
Manzi, Stefania / Mazzotti, Claudio / Bignozzi, Maria Chiara	Self-compacting concrete with recycled concrete aggregate: Study of the long-term properties	582-590
Alghazali, Hayder H. / Myers, John J.	Shear behavior of full-scale high volume fly ash-self consolidating concrete (HVFA-SCC) beams	161-171
Pansuk, Withit / Nguyen, Thuc N. / Sato, Yasushiko / den Uijl, J. A. / Walraven, J. C.	Shear capacity of high performance fiber reinforced concrete I-beams	182-193
Li, X. / Grasley, Z. C. / Garboczi, E. J. / Bullard, J. W.	Simulation of the influence of intrinsic C-S-H aging on time-dependent relaxation of hydrating cement paste	1024-1031
Małyszko, Leszek / Kowalska, Edyta / Bilko, Piotr	Splitting tensile behavior of autoclaved aerated concrete: Comparison of different specimens' results	1190-1198
Canestrari, Francesco / Ingrassia, Lorenzo Paolo / Ferrotti, Gilda / Lu, Xiaohu	State of the art of tribological tests for bituminous binders	718-728
Gill, Anhad Singh / Siddique, Rafat	Strength and micro-structural properties of self-compacting concrete containing metakaolin and rice husk ash	51-64
Behnood, Ali / Olek, Jan	Stress-dependent behavior and rutting resistance of modified asphalt binders: An MSCR approach	635-646
Nugroho, Naresworo / Bahtiar, Effendi Tri	Structural grading of Gigantochloa apus bamboo based on its flexural properties	1173-1189
Liu, Guojian / Zhang, Yunsheng / Wu, Meng / Huang, Ran	Study of depassivation of carbon steel in simulated concrete pore solution using different equivalent circuits	357-362
Robayo-Salazar, Rafael Andres / de Gutiérrez, Mejía / Puertas, Francisca	Study of synergy between a natural volcanic pozzolan and a granulated blast furnace slag in the production of geopolymeric pastes and mortars	151-160
Hesami, Ebrahim / Mehdizadeh, Gholamreza	Study of the amine-based liquid anti-stripping agents by simulating hot mix asphalt plant production process	1011-1017
Sun, Lijian / Guo, Hongchao / Liu, YunHe	Study on seismic behavior of steel frame with external hanging concrete walls containing recycled aggregates	790-808
Li, Xin / Lin, Xujian / Lin, Kui / Ji, Tao	Study on the degradation mechanism of sulphoaluminate cement sea sand concrete eroded by biological sulfuric acid	331-336
Li, Guoxin / Zhang, Ai / Song, Zhanping / Shi, Chen / Wang, Yan / Zhang, Junjie	Study on the resistance to seawater corrosion of the cementitious systems containing ordinary Portland cement or/and calcium aluminate cement	852-859
Zaidi, Syed Farrukh Alam / Ul Haq, Ehsan / Nur, Khushnuda / Ejaz, Noveed / Anis-ur-Rehman, M. / Zubair, Muhammad / Naveed, Muhammad	Synthesis & characterization of natural soil based inorganic polymer foam for thermal insulations	994-1000
Li, Xiuling / Bao, Yi / Wu, Lele / Yan, Qingxi / Ma, Hongyan / Chen, Genda / Zhang, Huining	Thermal and mechanical properties of high-performance fiber-reinforced cementitious composites after exposure to high temperatures	829-838
Senise, S. / Carrera, V. / Navarro, F. J. / Partal, P.	Thermomechanical and microstructural evaluation of hybrid rubberised bitumen containing a thermoplastic polymer	873-884
Samson, Gabriel / Cyr, Martin / Gao, Xiao Xiao	Thermomechanical performance of blended metakaolin-GGBS alkali-activated foam concrete	982-993
Shao, Wei / Shi, Danda / Jiang, Jianping / Chen, Youliang	Time-dependent lateral bearing behaviour of corrosion-damaged RC pipe piles in marine environments	676-684
Ling, Meng / Luo, Xue / Gu, Fan / Lytton, Robert L.	Time-temperature-aging-depth shift functions for dynamic modulus master curves of asphalt mixtures	943-951
Marastoni, Diego / Benedetti, Andrea / Pelà, Luca / Pignagnoli, Giacomo	Torque Penetrometric Test for the in-situ characterisation of historical mortars: fracture mechanics interpretation and experimental validation	509-520
Khalil, Noura / Aouad, Georges / El Cheikh, Khadija / Remond, Sébastien	Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars	382-391
Sadeghnejad, Mostafa / Shafabakhsh, GholamAli	Use of Nano SiO 2 and Nano TiO 2 to improve the mechanical behaviour of stone mastic asphalt mixtures	965-974
Lim, S. / Lee, W. / Choo, H. / Lee, C.	Utilization of high carbon fly ash and copper slag in electrically conductive controlled low strength material	42-50

Informations
sur cette fiche
IssueID
22653
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.