Construction and Building Materials - December 2017

Published:	December 2017

Articles in this Issue

Author(s)	Title	Page(s)
Subhy, Ayad	Advanced analytical techniques in fatigue and rutting related characterisations of modified bitumen: Literature review	28-45
Huang, Zujian / Sun, Yimin / Musso, Florian	Assessment of bamboo application in building envelope by comparison with reference timber	844-860
Orlik-Kożdoń, Bożena	Assessment of the application efficiency of recycling materials in thermal insulations	476-485
Lu, Yiyan / Liu, Zhenzhen / Li, Shan / Li, Weijie	Behavior of steel fibers reinforced self-stressing and self-compacting concrete-filled steel tube subjected to bending	639-651
Hadi, Muhammad N. S. / Al-Tikrite, Ahmed	Behaviour of fibre-reinforced RPC columns under different loading conditions	293-306
Qi, Youjun / Fang, Hai / Shi, Huiyuan / Liu, Weiqing / Qi, Yujun / Bai, Yu	Bending performance of GFRP-wood sandwich beams with lattice-web reinforcement in flatwise and sidewise directions	532-545
Huang, Yiduo / Wang, Qiang / Shi, Mengxiao	Characteristics and reactivity of ferronickel slag powder	773-789
Burgos, Diana M. / Guzmán, Álvaro / Torres, Nancy / Delvasto, Silvio	Chloride ion resistance of self-compacting concretes incorporating volcanic materials	565-573
Park, S. M. / Lee, N. K. / Lee, H. K.	Circulating fluidized bed combustion ash as controlled low-strength material (CLSM) by alkaline activation	728-738
Bao, Jiuwen / Wang, Licheng	Combined effect of water and sustained compressive loading on chloride penetration into concrete	708-718
Kong, Dezhi / Xiao, Yue / Wu, Shaopeng / Tang, Ning / Ling, Juntao / Wang, Fusong	Comparative evaluation of designing asphalt treated base mixture with composite aggregate types	819-827
Mairitsch, Erwin / Harmuth, Harald	Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger	277-283
Cascardi, Alessio / Longo, Fabio / Micelli, Francesco / Aiello, Maria Antonietta	Compressive strength of confined column with Fiber Reinforced Mortar (FRM): New design-oriented-models	387-401
Abdulla, Nwzad Abduljabar	Concrete filled PVC tube: A review	321-329
Ranachowski, Zbigniew / Schabowicz, Krzysztof	The contribution of fiber reinforcement system to the overall toughness of cellulose fiber concrete panels	1028-1034
Patil, Shilpa / Karkare, Bilavari / Goyal, Shweta	Corrosion induced damage detection of in-service RC slabs using acoustic emission technique	123-130
Luna Molina, F. J. / Alonso Alonso, M. C. / Sánchez Moreno, M. / Jarabo Centenero, R.	Corrosion protection of galvanized rebars in ternary binder concrete exposed to chloride penetration	468-475
Mei, Sheng-qi / Zhang, Jie-chao / Wang, Yuan-Feng / Zou, Ruo-fei	Creep-recovery of normal strength and high strength concrete	175-183
Luo, Sang / Qian, Zhendong / Yang, Xu / Wang, Hui	Design of gussasphalt mixtures based on performance of gussasphalt binders, mastics and mixtures	131-141
He, Jialuo / Shi, Xianming	Developing an abiotic capsule-based self-healing system for cementitious materials: The state of knowledge	1096-1113
Cui, Wei / Huang, Junyan / Song, Huifang / Xiao, Ming	Development of two new anti-washout grouting materials using multi-way ANOVA in conjunction with grey relational analysis	184-198
Wang, Zike / Zhao, Xiao-Ling / Xian, Guijun / Wu, Gang / Singh Raman, R. K. / Al-Saadi, Saad	Durability study on interlaminar shear behaviour of basalt-, glass- and carbon-fibre reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment	985-1004
Yu, Ruien / Liu, Xiaolong / Zhang, Maorong / Zhu, Xijing / Fang, Changqing	Dynamic stability of ethylene-vinyl acetate copolymer/crumb rubber modified asphalt	284-292
Chen, Zhitao / Yang, En-Hua	Early age hydration of blended cement with different size fractions of municipal solid waste incineration bottom ash	880-890
Shen, Peiliang / Chen, Wei / Lu, Linnu / Geng, Haining / Li, Qiu	Effect of aggregate exposing and curing agent on the performance of exposed aggregate concrete	675-683
Hao, Gengren / Huang, Weidong / Yuan, Jie / Tang, Naipeng / Xiao, Feipeng	Effect of aging on chemical and rheological properties of SBS modified asphalt with different compositions	902-910
Sharifnia, Houri / Hindman, Daniel P.	Effect of manufacturing parameters on mechanical properties of southern yellow pine cross laminated timbers	314-320
Le, Huy Viet / Kim, Dong joo	Effect of matrix cracking on electrical resistivity of high performance fiber reinforced cementitious composites in tension	750-760
Singh, Surender / Ransinchung, G. D. / Kumar, Praveen	Effect of mineral admixtures on fresh, mechanical and durability properties of RAP inclusive concrete	19-27
Polat, Rıza / Demirboğa, Ramazan / Karagöl, Fatma	The effect of nano-MgO on the setting time, autogenous shrinkage, microstructure and mechanical properties of high performance cement paste and mortar	208-218
Koohestani, Babak	Effect of saline admixtures on mechanical and microstructural properties of cementitious matrices containing tailings	1019-1027
Demir, İlhami / Sevim, Özer	Effect of sulfate on cement mortars containing Li2SO4, LiNO3, Li2CO3 and LiBr	46-55
Isteita, Moad / Xi, Yunping	The effect of temperature variation on chloride penetration in concrete	73-82
Li, Yi / Liu, Liping / Xiao, Feipeng / Sun, Lijun	Effective temperature for predicting permanent deformation of asphalt pavement	871-879
Jin, Nan Ji / Yeon, Jaeheum / Seung, Inbae / Yeon, Kyu-Seok	Effects of curing temperature and hardener type on the mechanical properties of bisphenol F-type epoxy resin concrete	933-943
Němeček, Jiří / Li, Linfei / Xi, Yunping	Electrokinetic nanoparticle injection for remediating leaks in oil well cement	63-72
Kouchaki, Sareh / Roshani, Hossein / Prozzi, Jorge A. / Bernardo Hernandez, Joaquin	Evaluation of aggregates surface micro-texture using spectral analysis	944-955
Martin, Renaud-Pierre / Sanchez, Leandro / Fournier, Benoit / Toutlemonde, François	Evaluation of different techniques for the diagnosis & prognosis of Internal Swelling Reaction (ISR) mechanisms in concrete	956-964
Sounthararajah, Arooran / Wong, Leslie / Nguyen, Nhu / Bui, Ha Hong / Kodikara, Jayantha	Evaluation of flexural behaviour of cemented pavement material beams using distributed fibre optic sensors	965-975
Pires Leandro, Rodrigo / Vasconcelos, Kamilla L. / Bernucci, Liedi Légi Bariani	Evaluation of the laboratory compaction method on the air voids and the mechanical behavior of hot mix asphalt	424-434
Ameri, Mahmoud / Mohammadi, Reza / Vamegh, Mostafa / Molayem, Mohammad	Evaluation the effects of nanoclay on permanent deformation behavior of stone mastic asphalt mixtures	107-113
Saltan, Mehmet / Terzi, Serdal / Karahancer, Sebnem	Examination of hot mix asphalt and binder performance modified with nano silica	976-984
Lv, Le-Yang / Zhang, Hongzhi / Schlangen, Erik / Yang, Zhengxian / Xing, Feng	Experimental and numerical study of crack behaviour for capsule-based self-healing cementitious materials	219-229
Shafieifar, Mohamadreza / Farzad, Mahsa / Azizinamini, Atorod	Experimental and numerical study on mechanical properties of Ultra High Performance Concrete (UHPC)	402-411
Martins, A. / Vasconcelos, G. / Costa, A. C.	Experimental assessment of the mechanical behaviour of ties on brick veneers anchored to brick masonry infills	515-531
Çalışkan, Özlem / Aras, Murat	Experimental investigation of behaviour and failure modes of chemical anchorages bonded to concrete	362-375
Kumar Suluguru, Ashok / Jayatheja, M. / Kar, Arkamitra / GuhaRay, Anasua / Surana, Shreyans R. / James, Naveen	Experimental studies on the microstructural, physical and chemical characteristics of building derived materials to assess their suitability in ground improvement	921-932
Li, Xin / Zheng, Xiaoyan / Ashraf, Mahmud / Li, Haitao	Experimental study on the longitudinal shear bond behavior of lightweight aggregate concrete – Closed profiled steel sheeting composite slabs	599-610
Ramakrishnan, K. / Pugazhmani, G. / Sripragadeesh, R. / Muthu, D. / Venkatasubramanian, C.	Experimental study on the mechanical and durability properties of concrete with waste glass powder and ground granulated blast furnace slag as supplementary cementitious materials	739-749
Wu, Shenghua / Zhang, Weiguang / Shen, Shihui / Li, Xiaojun / Muhunthan, Balasingam / Mohammad, Louay N.	Field-aged asphalt binder performance evaluation for Evotherm warm mix asphalt: Comparisons with hot mix asphalt	574-583
Shah, Asif H. / Sharma, U. K.	Fire resistance and spalling performance of confined concrete columns	161-174
Noor-E-Khuda, Sarkar / Albermani, Faris / Veidt, Martin	Flexural strength of weathered granites: Influence of freeze and thaw cycles	891-901
Castellanos, A. G. / Mawson, H. / Burke, V. / Prabhakar, P.	Fly-ash cenosphere/clay blended composites for impact resistant tiles	307-313
Liew, Yun-Ming / Heah, Cheng-Yong / Li, Long-yuan / Jaya, Nur Ain / Abdullah, Mohd Mustafa Al Bakri / Tan, Soo Jin / Hussin, Kamarudin	Formation of one-part-mixing geopolymers and geopolymer ceramics from geopolymer powder	9-18
Cabboi, Alessandro / Gentile, Carmelo / Saisi, Antonella	From continuous vibration monitoring to FEM-based damage assessment: Application on a stone-masonry tower	252-265
Liew, K. M. / Sojobi, A. O. / Zhang, L. W.	Green concrete: Prospects and challenges	1063-1095
Im, Healin / Lee, Yunsu / Kim, Do Hyeong / Inturu, Omkaram / Liu, Na / Lee, Sungho / Kwon, Seung-Jun / Lee, Han-Seung / Kim, Sunkook	A highly sensitive ultrathin-film iron corrosion sensor encapsulated by an anion exchange membrane embedded in mortar	506-514
Bahekar, Prasad V. / Gadve, Sangeeta S.	Impressed current cathodic protection of rebar in concrete using Carbon FRP laminate	242-251
Khan, Hasim Ali / Nanda, Radhikesh Prasad / Das, Diptesh	In-plane strength of masonry panel strengthened with geosynthetic	351-361
Sun, Jinfeng / Xu, Kai / Shi, Chaoqi / Ma, Jian / Li, Weifeng / Shen, Xiaodong	Influence of core/shell TiO2@SiO2 nanoparticles on cement hydration	114-122
Costa, E. B. C. / Cardoso, F. A. / John, V. M.	Influence of high contents of limestone fines on rheological behaviour and bond strength of cement-based mortars	1114-1126
Muthu Kumar, E. / Ramamurthy, K.	Influence of production on the strength, density and water absorption of aerated geopolymer paste and mortar using Class F fly ash	1137-1149
López, O. / Torres, I. / Guimarães, A. S. / Delgado, J. M. P. Q. / de Freitas, V. P.	Inter-laboratory variability results of porous building materials hygrothermal properties	412-423
Shadkam, Hamid Reza / Dadsetan, Sina / Tadayon, Mohsen / Sanchez, Leandro F. M. / Zakeri, Jabbar Ali	An investigation of the effects of limestone powder and Viscosity Modifying Agent in durability related parameters of self-consolidating concrete (SCC)	152-160
Gong, Xiangbing / Romero, Pedro / Dong, Zejiao / Li, Yang	Investigation on the low temperature property of asphalt fine aggregate matrix and asphalt mixture including the environmental factors	56-62
Dolzycki, Bohdan / Jaczewski, Mariusz / Szydlowski, Cezary	The long-term properties of mineral-cement-emulsion mixtures	799-808
Li, Mingchao / Zhang, Mengxi / Hu, Yu / Zhang, Jinrui	Mechanical properties investigation of high-fluidity impermeable and anti-cracking concrete in high roller-compacted concrete dams	861-870
Faria, Paulina / Duarte, Paulo / Barbosa, Davide / Ferreira, Isabel	New composite of natural hydraulic lime mortar with graphene oxide	1150-1157
Pei, Huafu / Shao, Hongyu / Li, Zongjin	A novel early-age shrinkage measurement method based on non-contact electrical resistivity and FBG sensing techniques	1158-1162
Xu, Fei / Chen, Ju / Chan, Tak-Ming	Numerical analysis and punching shear fracture based design of longitudinal plate to concrete-filled CHS connections	91-106
Diakhate, Malick / Angellier, Nicolas / Moutou Pitti, Rostand / Dubois, Frédéric	On the crack tip propagation monitoring within wood material: Cluster analysis of acoustic emission data compared with numerical modelling	911-920
Varanda, Catarina / Portugal, Inês / Ribeiro, Jorge / Silva, Artur M. S. / Silva, Carlos M.	Optimization of bitumen formulations using mixture design of experiments (MDOE)	611-620
Qu, Yandong / Liu, Wanli / Gwarzo, Musa / Zhang, Wenjiao / Zhai, Cheng / Kong, Xiangqing	Parametric study of anti-explosion performance of reinforced concrete T-shaped beam strengthened with steel plates	692-707
Hussein, Ahmed Abdulameer / Jaya, Ramadhansyah Putra / Hassan, Norhidayah Abdul / Yaacob, Haryati / Huseien, Ghasan Fahim / Ibrahim, Mohd Haziman Wan	Performance of nanoceramic powder on the chemical and physical properties of bitumen	496-505
Sánchez, Martha L. / Morales, Luz Y. / Caicedo, Juan D.	Physical and mechanical properties of agglomerated panels made from bamboo fiber and vegetable resin	330-339
Zhu, Hongbo / Li, Chen / Cheng, Yijie / Jiang, Zhengwu / Wu, Kaifan	Pozzolanicity of fly ash modified by fluidized bed reactor–vapor deposition	719-727
Mohajerani, Abbas / Vajna, John / Cheung, Tsz Ho Homan / Kurmus, Halenur / Arulrajah, Arul / Horpibulsuk, Suksun	Practical recycling applications of crushed waste glass in construction materials: A review	443-467
Guo, Wenhao / Hu, Jie / Wang, Yangyang / Zhang, Zhangmin / Yin, Suhong / Wei, Jiangxiong / Yu, Qijun	Preparation and performance of conductive mortar based on lightweight conductive aggregates	340-350
Man, Jianzong / Gao, Wenyuan / Yan, Shuang / Liu, Guishan / Hao, Hongshun	Preparation of porous brick from diatomite and sugar filter mud at lower temperature	1035-1042
Wang, Xiang / Xia, Jun / Nanayakkara, Ominda / Li, Yishen	Properties of high-performance cementitious composites containing recycled rubber crumb	1127-1136
Sunayana, Sushree / Barai, Sudhirkumar V.	Recycled aggregate concrete incorporating fly ash: Comparative study on particle packing and conventional method	376-386
Xuedong, Guo / Mingzhi, Sun / Wenting, Dai / Kaixuan, Zhu / Jilu, Li	Research on the fatigue whole life of asphalt mixture based on the nonlinear damage theory	546-554
Nieuwoudt, P. D. / Babafemi, A. J. / Boshoff, W. P.	The response of cracked steel fibre reinforced concrete under various sustained stress levels on both the macro and single fibre level	828-843
Pang, Yuan / Hao, Peiwen	A review of water transport in dense-graded asphalt mixtures	1005-1018
Ye, Hailong / Jin, Nanguo / Fu, Chuanqing / Jin, Xianyu	Rust distribution and corrosion-induced cracking patterns of corner-located rebar in concrete cover	684-691
Zhang, Zhigang / Zhang, Qian	Self-healing ability of Engineered Cementitious Composites (ECC) under different exposure environments	142-151
Botella, Ramón / Pérez-Jiménez, Félix E. / Riahi, Ebrahim / López-Montero, Teresa / Miró, Rodrigo / Martìnez, Adriana H.	Self-heating and other reversible phenomena in cyclic testing of bituminous materials	809-818
Yu, Zaijun / Fan, Mizi	Short- and long-term performance of wood based panel products subjected to various stress modes	652-660
Xia, Wei-Yi / Feng, Ya-Song / Jin, Fei / Zhang, Li-Ming / Du, Yan-Jun	Stabilization and solidification of a heavy metal contaminated site soil using a hydroxyapatite based binder	199-207
Ortiz, J. A. / de la Fuente, A. / Mena Sebastia, F. / Segura, I. / Aguado, A.	Steel-fibre-reinforced self-compacting concrete with 100% recycled mixed aggregates suitable for structural applications	230-241
Lin, Jian-Ping / Wang, Guannan / Bao, Guangjian / Xu, Rongqiao	Stiffness matrix for the analysis and design of partial-interaction composite beams	761-772
Deng, Zhiheng / Wang, Yumei / Sheng, Jun / Hu, Xu	Strength and deformation of recycled aggregate concrete under triaxial compression	1043-1052
Moreno-Navarro, F. / Sol-Sánchez, M. / Rubio-Gámez, M. C.	Structural analysis of polymer modified bituminous materials in the rehabilitation of light-medium traffic volume roads	621-631
Peng, Songtao / Li, Xiang / Wu, Zhenyu / Chen, Jiankang / Lu, Xiang	Study of the key technologies of application of tuff powder concrete at the Daigo hydropower station in Tibet	1-8
Wang, Lan / Ren, Minda / Xing, YongMing / Chen, Gang	Study on affecting factors of interface crack for asphalt mixture based on microstructure	1053-1062
Lemougna, Patrick N. / Wang, Kai-tuo / Tang, Qing / Cui, Xue-min	Study on the development of inorganic polymers from red mud and slag system: Application in mortar and lightweight materials	486-495
Georgin, J. F. / Maach, N. / Pommay, J.	Sulphate crystallization modelling and surface reactivity in solution	266-276
Jiang, Jia-Fei / Xiao, Ping-cheng / Li, Ben-ben	True-triaxial compressive behaviour of concrete under passive confinement	584-598
Bernat-Maso, Ernest / Teneva, Elitsa / Escrig, Christian / Gil, Lluís	Ultrasound transmission method to assess raw earthen materials	555-564
Kim, Hak-Young	Urea additives for reduction of hydration heat in cement composites	790-798
Pantawee, Saksith / Sinsiri, Theerawat / Jaturapitakkul, Chai / Chindaprasirt, Prinya	Utilization of hemp concrete using hemp shiv as coarse aggregate with aluminium sulfate [Al2(SO4)3] and hydrated lime [Ca(OH)2] treatment	435-442
Bhardwaj, Bavita / Kumar, Pardeep	Waste foundry sand in concrete: A review	661-674
Garcia Otto, Gustavo / Simonin, Jean-Michel / Piau, Jean-Michel / Cottineau, Louis-Marie / Chupin, Olivier / Momm, Leto / Valente, Amir Mattar	Weigh-in-motion (WIM) sensor response model using pavement stress and deflection	83-90
Elinwa, Augustine U. / Umar, Mohammed	X-ray diffraction and microstructure studies of gum Arabic-cement concrete	632-638

About this
data sheet
IssueID
22652
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.