Construction and Building Materials - Dezember 2017

Erschienen:	Dezember 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Subhy, Ayad	Advanced analytical techniques in fatigue and rutting related characterisations of modified bitumen: Literature review	28-45
Huang, Zujian / Sun, Yimin / Musso, Florian	Assessment of bamboo application in building envelope by comparison with reference timber	844-860
Orlik-Kożdoń, Bożena	Assessment of the application efficiency of recycling materials in thermal insulations	476-485
Lu, Yiyan / Liu, Zhenzhen / Li, Shan / Li, Weijie	Behavior of steel fibers reinforced self-stressing and self-compacting concrete-filled steel tube subjected to bending	639-651
Hadi, Muhammad N. S. / Al-Tikrite, Ahmed	Behaviour of fibre-reinforced RPC columns under different loading conditions	293-306
Qi, Youjun / Fang, Hai / Shi, Huiyuan / Liu, Weiqing / Qi, Yujun / Bai, Yu	Bending performance of GFRP-wood sandwich beams with lattice-web reinforcement in flatwise and sidewise directions	532-545
Huang, Yiduo / Wang, Qiang / Shi, Mengxiao	Characteristics and reactivity of ferronickel slag powder	773-789
Burgos, Diana M. / Guzmán, Álvaro / Torres, Nancy / Delvasto, Silvio	Chloride ion resistance of self-compacting concretes incorporating volcanic materials	565-573
Park, S. M. / Lee, N. K. / Lee, H. K.	Circulating fluidized bed combustion ash as controlled low-strength material (CLSM) by alkaline activation	728-738
Bao, Jiuwen / Wang, Licheng	Combined effect of water and sustained compressive loading on chloride penetration into concrete	708-718
Kong, Dezhi / Xiao, Yue / Wu, Shaopeng / Tang, Ning / Ling, Juntao / Wang, Fusong	Comparative evaluation of designing asphalt treated base mixture with composite aggregate types	819-827
Mairitsch, Erwin / Harmuth, Harald	Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger	277-283
Cascardi, Alessio / Longo, Fabio / Micelli, Francesco / Aiello, Maria Antonietta	Compressive strength of confined column with Fiber Reinforced Mortar (FRM): New design-oriented-models	387-401
Abdulla, Nwzad Abduljabar	Concrete filled PVC tube: A review	321-329
Ranachowski, Zbigniew / Schabowicz, Krzysztof	The contribution of fiber reinforcement system to the overall toughness of cellulose fiber concrete panels	1028-1034
Patil, Shilpa / Karkare, Bilavari / Goyal, Shweta	Corrosion induced damage detection of in-service RC slabs using acoustic emission technique	123-130
Luna Molina, F. J. / Alonso Alonso, M. C. / Sánchez Moreno, M. / Jarabo Centenero, R.	Corrosion protection of galvanized rebars in ternary binder concrete exposed to chloride penetration	468-475
Mei, Sheng-qi / Zhang, Jie-chao / Wang, Yuan-Feng / Zou, Ruo-fei	Creep-recovery of normal strength and high strength concrete	175-183
Luo, Sang / Qian, Zhendong / Yang, Xu / Wang, Hui	Design of gussasphalt mixtures based on performance of gussasphalt binders, mastics and mixtures	131-141
He, Jialuo / Shi, Xianming	Developing an abiotic capsule-based self-healing system for cementitious materials: The state of knowledge	1096-1113
Cui, Wei / Huang, Junyan / Song, Huifang / Xiao, Ming	Development of two new anti-washout grouting materials using multi-way ANOVA in conjunction with grey relational analysis	184-198
Wang, Zike / Zhao, Xiao-Ling / Xian, Guijun / Wu, Gang / Singh Raman, R. K. / Al-Saadi, Saad	Durability study on interlaminar shear behaviour of basalt-, glass- and carbon-fibre reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment	985-1004
Yu, Ruien / Liu, Xiaolong / Zhang, Maorong / Zhu, Xijing / Fang, Changqing	Dynamic stability of ethylene-vinyl acetate copolymer/crumb rubber modified asphalt	284-292
Chen, Zhitao / Yang, En-Hua	Early age hydration of blended cement with different size fractions of municipal solid waste incineration bottom ash	880-890
Shen, Peiliang / Chen, Wei / Lu, Linnu / Geng, Haining / Li, Qiu	Effect of aggregate exposing and curing agent on the performance of exposed aggregate concrete	675-683
Hao, Gengren / Huang, Weidong / Yuan, Jie / Tang, Naipeng / Xiao, Feipeng	Effect of aging on chemical and rheological properties of SBS modified asphalt with different compositions	902-910
Sharifnia, Houri / Hindman, Daniel P.	Effect of manufacturing parameters on mechanical properties of southern yellow pine cross laminated timbers	314-320
Le, Huy Viet / Kim, Dong joo	Effect of matrix cracking on electrical resistivity of high performance fiber reinforced cementitious composites in tension	750-760
Singh, Surender / Ransinchung, G. D. / Kumar, Praveen	Effect of mineral admixtures on fresh, mechanical and durability properties of RAP inclusive concrete	19-27
Polat, Rıza / Demirboğa, Ramazan / Karagöl, Fatma	The effect of nano-MgO on the setting time, autogenous shrinkage, microstructure and mechanical properties of high performance cement paste and mortar	208-218
Koohestani, Babak	Effect of saline admixtures on mechanical and microstructural properties of cementitious matrices containing tailings	1019-1027
Demir, İlhami / Sevim, Özer	Effect of sulfate on cement mortars containing Li2SO4, LiNO3, Li2CO3 and LiBr	46-55
Isteita, Moad / Xi, Yunping	The effect of temperature variation on chloride penetration in concrete	73-82
Li, Yi / Liu, Liping / Xiao, Feipeng / Sun, Lijun	Effective temperature for predicting permanent deformation of asphalt pavement	871-879
Jin, Nan Ji / Yeon, Jaeheum / Seung, Inbae / Yeon, Kyu-Seok	Effects of curing temperature and hardener type on the mechanical properties of bisphenol F-type epoxy resin concrete	933-943
Němeček, Jiří / Li, Linfei / Xi, Yunping	Electrokinetic nanoparticle injection for remediating leaks in oil well cement	63-72
Kouchaki, Sareh / Roshani, Hossein / Prozzi, Jorge A. / Bernardo Hernandez, Joaquin	Evaluation of aggregates surface micro-texture using spectral analysis	944-955
Martin, Renaud-Pierre / Sanchez, Leandro / Fournier, Benoit / Toutlemonde, François	Evaluation of different techniques for the diagnosis & prognosis of Internal Swelling Reaction (ISR) mechanisms in concrete	956-964
Sounthararajah, Arooran / Wong, Leslie / Nguyen, Nhu / Bui, Ha Hong / Kodikara, Jayantha	Evaluation of flexural behaviour of cemented pavement material beams using distributed fibre optic sensors	965-975
Pires Leandro, Rodrigo / Vasconcelos, Kamilla L. / Bernucci, Liedi Légi Bariani	Evaluation of the laboratory compaction method on the air voids and the mechanical behavior of hot mix asphalt	424-434
Ameri, Mahmoud / Mohammadi, Reza / Vamegh, Mostafa / Molayem, Mohammad	Evaluation the effects of nanoclay on permanent deformation behavior of stone mastic asphalt mixtures	107-113
Saltan, Mehmet / Terzi, Serdal / Karahancer, Sebnem	Examination of hot mix asphalt and binder performance modified with nano silica	976-984
Lv, Le-Yang / Zhang, Hongzhi / Schlangen, Erik / Yang, Zhengxian / Xing, Feng	Experimental and numerical study of crack behaviour for capsule-based self-healing cementitious materials	219-229
Shafieifar, Mohamadreza / Farzad, Mahsa / Azizinamini, Atorod	Experimental and numerical study on mechanical properties of Ultra High Performance Concrete (UHPC)	402-411
Martins, A. / Vasconcelos, G. / Costa, A. C.	Experimental assessment of the mechanical behaviour of ties on brick veneers anchored to brick masonry infills	515-531
Çalışkan, Özlem / Aras, Murat	Experimental investigation of behaviour and failure modes of chemical anchorages bonded to concrete	362-375
Kumar Suluguru, Ashok / Jayatheja, M. / Kar, Arkamitra / GuhaRay, Anasua / Surana, Shreyans R. / James, Naveen	Experimental studies on the microstructural, physical and chemical characteristics of building derived materials to assess their suitability in ground improvement	921-932
Li, Xin / Zheng, Xiaoyan / Ashraf, Mahmud / Li, Haitao	Experimental study on the longitudinal shear bond behavior of lightweight aggregate concrete – Closed profiled steel sheeting composite slabs	599-610
Ramakrishnan, K. / Pugazhmani, G. / Sripragadeesh, R. / Muthu, D. / Venkatasubramanian, C.	Experimental study on the mechanical and durability properties of concrete with waste glass powder and ground granulated blast furnace slag as supplementary cementitious materials	739-749
Wu, Shenghua / Zhang, Weiguang / Shen, Shihui / Li, Xiaojun / Muhunthan, Balasingam / Mohammad, Louay N.	Field-aged asphalt binder performance evaluation for Evotherm warm mix asphalt: Comparisons with hot mix asphalt	574-583
Shah, Asif H. / Sharma, U. K.	Fire resistance and spalling performance of confined concrete columns	161-174
Noor-E-Khuda, Sarkar / Albermani, Faris / Veidt, Martin	Flexural strength of weathered granites: Influence of freeze and thaw cycles	891-901
Castellanos, A. G. / Mawson, H. / Burke, V. / Prabhakar, P.	Fly-ash cenosphere/clay blended composites for impact resistant tiles	307-313
Liew, Yun-Ming / Heah, Cheng-Yong / Li, Long-yuan / Jaya, Nur Ain / Abdullah, Mohd Mustafa Al Bakri / Tan, Soo Jin / Hussin, Kamarudin	Formation of one-part-mixing geopolymers and geopolymer ceramics from geopolymer powder	9-18
Cabboi, Alessandro / Gentile, Carmelo / Saisi, Antonella	From continuous vibration monitoring to FEM-based damage assessment: Application on a stone-masonry tower	252-265
Liew, K. M. / Sojobi, A. O. / Zhang, L. W.	Green concrete: Prospects and challenges	1063-1095
Im, Healin / Lee, Yunsu / Kim, Do Hyeong / Inturu, Omkaram / Liu, Na / Lee, Sungho / Kwon, Seung-Jun / Lee, Han-Seung / Kim, Sunkook	A highly sensitive ultrathin-film iron corrosion sensor encapsulated by an anion exchange membrane embedded in mortar	506-514
Bahekar, Prasad V. / Gadve, Sangeeta S.	Impressed current cathodic protection of rebar in concrete using Carbon FRP laminate	242-251
Khan, Hasim Ali / Nanda, Radhikesh Prasad / Das, Diptesh	In-plane strength of masonry panel strengthened with geosynthetic	351-361
Sun, Jinfeng / Xu, Kai / Shi, Chaoqi / Ma, Jian / Li, Weifeng / Shen, Xiaodong	Influence of core/shell TiO2@SiO2 nanoparticles on cement hydration	114-122
Costa, E. B. C. / Cardoso, F. A. / John, V. M.	Influence of high contents of limestone fines on rheological behaviour and bond strength of cement-based mortars	1114-1126
Muthu Kumar, E. / Ramamurthy, K.	Influence of production on the strength, density and water absorption of aerated geopolymer paste and mortar using Class F fly ash	1137-1149
López, O. / Torres, I. / Guimarães, A. S. / Delgado, J. M. P. Q. / de Freitas, V. P.	Inter-laboratory variability results of porous building materials hygrothermal properties	412-423
Shadkam, Hamid Reza / Dadsetan, Sina / Tadayon, Mohsen / Sanchez, Leandro F. M. / Zakeri, Jabbar Ali	An investigation of the effects of limestone powder and Viscosity Modifying Agent in durability related parameters of self-consolidating concrete (SCC)	152-160
Gong, Xiangbing / Romero, Pedro / Dong, Zejiao / Li, Yang	Investigation on the low temperature property of asphalt fine aggregate matrix and asphalt mixture including the environmental factors	56-62
Dolzycki, Bohdan / Jaczewski, Mariusz / Szydlowski, Cezary	The long-term properties of mineral-cement-emulsion mixtures	799-808
Li, Mingchao / Zhang, Mengxi / Hu, Yu / Zhang, Jinrui	Mechanical properties investigation of high-fluidity impermeable and anti-cracking concrete in high roller-compacted concrete dams	861-870
Faria, Paulina / Duarte, Paulo / Barbosa, Davide / Ferreira, Isabel	New composite of natural hydraulic lime mortar with graphene oxide	1150-1157
Pei, Huafu / Shao, Hongyu / Li, Zongjin	A novel early-age shrinkage measurement method based on non-contact electrical resistivity and FBG sensing techniques	1158-1162
Xu, Fei / Chen, Ju / Chan, Tak-Ming	Numerical analysis and punching shear fracture based design of longitudinal plate to concrete-filled CHS connections	91-106
Diakhate, Malick / Angellier, Nicolas / Moutou Pitti, Rostand / Dubois, Frédéric	On the crack tip propagation monitoring within wood material: Cluster analysis of acoustic emission data compared with numerical modelling	911-920
Varanda, Catarina / Portugal, Inês / Ribeiro, Jorge / Silva, Artur M. S. / Silva, Carlos M.	Optimization of bitumen formulations using mixture design of experiments (MDOE)	611-620
Qu, Yandong / Liu, Wanli / Gwarzo, Musa / Zhang, Wenjiao / Zhai, Cheng / Kong, Xiangqing	Parametric study of anti-explosion performance of reinforced concrete T-shaped beam strengthened with steel plates	692-707
Hussein, Ahmed Abdulameer / Jaya, Ramadhansyah Putra / Hassan, Norhidayah Abdul / Yaacob, Haryati / Huseien, Ghasan Fahim / Ibrahim, Mohd Haziman Wan	Performance of nanoceramic powder on the chemical and physical properties of bitumen	496-505
Sánchez, Martha L. / Morales, Luz Y. / Caicedo, Juan D.	Physical and mechanical properties of agglomerated panels made from bamboo fiber and vegetable resin	330-339
Zhu, Hongbo / Li, Chen / Cheng, Yijie / Jiang, Zhengwu / Wu, Kaifan	Pozzolanicity of fly ash modified by fluidized bed reactor–vapor deposition	719-727
Mohajerani, Abbas / Vajna, John / Cheung, Tsz Ho Homan / Kurmus, Halenur / Arulrajah, Arul / Horpibulsuk, Suksun	Practical recycling applications of crushed waste glass in construction materials: A review	443-467
Guo, Wenhao / Hu, Jie / Wang, Yangyang / Zhang, Zhangmin / Yin, Suhong / Wei, Jiangxiong / Yu, Qijun	Preparation and performance of conductive mortar based on lightweight conductive aggregates	340-350
Man, Jianzong / Gao, Wenyuan / Yan, Shuang / Liu, Guishan / Hao, Hongshun	Preparation of porous brick from diatomite and sugar filter mud at lower temperature	1035-1042
Wang, Xiang / Xia, Jun / Nanayakkara, Ominda / Li, Yishen	Properties of high-performance cementitious composites containing recycled rubber crumb	1127-1136
Sunayana, Sushree / Barai, Sudhirkumar V.	Recycled aggregate concrete incorporating fly ash: Comparative study on particle packing and conventional method	376-386
Xuedong, Guo / Mingzhi, Sun / Wenting, Dai / Kaixuan, Zhu / Jilu, Li	Research on the fatigue whole life of asphalt mixture based on the nonlinear damage theory	546-554
Nieuwoudt, P. D. / Babafemi, A. J. / Boshoff, W. P.	The response of cracked steel fibre reinforced concrete under various sustained stress levels on both the macro and single fibre level	828-843
Pang, Yuan / Hao, Peiwen	A review of water transport in dense-graded asphalt mixtures	1005-1018
Ye, Hailong / Jin, Nanguo / Fu, Chuanqing / Jin, Xianyu	Rust distribution and corrosion-induced cracking patterns of corner-located rebar in concrete cover	684-691
Zhang, Zhigang / Zhang, Qian	Self-healing ability of Engineered Cementitious Composites (ECC) under different exposure environments	142-151
Botella, Ramón / Pérez-Jiménez, Félix E. / Riahi, Ebrahim / López-Montero, Teresa / Miró, Rodrigo / Martìnez, Adriana H.	Self-heating and other reversible phenomena in cyclic testing of bituminous materials	809-818
Yu, Zaijun / Fan, Mizi	Short- and long-term performance of wood based panel products subjected to various stress modes	652-660
Xia, Wei-Yi / Feng, Ya-Song / Jin, Fei / Zhang, Li-Ming / Du, Yan-Jun	Stabilization and solidification of a heavy metal contaminated site soil using a hydroxyapatite based binder	199-207
Ortiz, J. A. / de la Fuente, A. / Mena Sebastia, F. / Segura, I. / Aguado, A.	Steel-fibre-reinforced self-compacting concrete with 100% recycled mixed aggregates suitable for structural applications	230-241
Lin, Jian-Ping / Wang, Guannan / Bao, Guangjian / Xu, Rongqiao	Stiffness matrix for the analysis and design of partial-interaction composite beams	761-772
Deng, Zhiheng / Wang, Yumei / Sheng, Jun / Hu, Xu	Strength and deformation of recycled aggregate concrete under triaxial compression	1043-1052
Moreno-Navarro, F. / Sol-Sánchez, M. / Rubio-Gámez, M. C.	Structural analysis of polymer modified bituminous materials in the rehabilitation of light-medium traffic volume roads	621-631
Peng, Songtao / Li, Xiang / Wu, Zhenyu / Chen, Jiankang / Lu, Xiang	Study of the key technologies of application of tuff powder concrete at the Daigo hydropower station in Tibet	1-8
Wang, Lan / Ren, Minda / Xing, YongMing / Chen, Gang	Study on affecting factors of interface crack for asphalt mixture based on microstructure	1053-1062
Lemougna, Patrick N. / Wang, Kai-tuo / Tang, Qing / Cui, Xue-min	Study on the development of inorganic polymers from red mud and slag system: Application in mortar and lightweight materials	486-495
Georgin, J. F. / Maach, N. / Pommay, J.	Sulphate crystallization modelling and surface reactivity in solution	266-276
Jiang, Jia-Fei / Xiao, Ping-cheng / Li, Ben-ben	True-triaxial compressive behaviour of concrete under passive confinement	584-598
Bernat-Maso, Ernest / Teneva, Elitsa / Escrig, Christian / Gil, Lluís	Ultrasound transmission method to assess raw earthen materials	555-564
Kim, Hak-Young	Urea additives for reduction of hydration heat in cement composites	790-798
Pantawee, Saksith / Sinsiri, Theerawat / Jaturapitakkul, Chai / Chindaprasirt, Prinya	Utilization of hemp concrete using hemp shiv as coarse aggregate with aluminium sulfate [Al2(SO4)3] and hydrated lime [Ca(OH)2] treatment	435-442
Bhardwaj, Bavita / Kumar, Pardeep	Waste foundry sand in concrete: A review	661-674
Garcia Otto, Gustavo / Simonin, Jean-Michel / Piau, Jean-Michel / Cottineau, Louis-Marie / Chupin, Olivier / Momm, Leto / Valente, Amir Mattar	Weigh-in-motion (WIM) sensor response model using pavement stress and deflection	83-90
Elinwa, Augustine U. / Umar, Mohammed	X-ray diffraction and microstructure studies of gum Arabic-cement concrete	632-638

Über diese
Datenseite
IssueID
22652
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Dezember 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Dezember 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.