Construction and Building Materials - November 2017

Published:	November 2017

Articles in this Issue

Author(s)	Title	Page(s)
Heichelheim, Eric W. / Montoya, Lupita D. / Hubler, Mija H.	Aerosol generation in compressive concrete fragmentation	1039-1049
Xue, Jinshun / Jiang, Yingjun	Analysis on the fatigue properties of vertical vibration compacted lime–fly ash-stabilized macadam	531-541
Le, Duc-Hien / Sheen, Yeong-Nain / Bui, Quoc-Bao	An assessment on volume stabilization of mortar with stainless steel slag sand	200-208
Zia, Asad / Ali, Majid	Behavior of fiber reinforced concrete for controlling the rate of cracking in canal-lining	726-739
Wang, Wenjie / Chouw, Nawawi	Behaviour of CFRC beams strengthened by FFRP laminates under static and impact loadings	956-964
He, Jun / Xian, Guijun	Bond-slip behavior of fiber reinforced polymer strips-steel interface	250-258
Guerreiro, João / Proença, Jorge M. / Ferreira, João Gomes / Gago, António Sousa	Bonding and anchoring of a CFRP reinforced render for the external strengthening of old masonry buildings	56-64
Pham, Thai-Hoan / Kim, Seung-Eock	Characteristics of microstructural phases relevant to the mechanical properties in structural steel weld zone studied by using indentation	176-186
Gu, Fan / Zhang, Yuqing / Luo, Xue / Sahin, Hakan / Lytton, Robert L.	Characterization and prediction of permanent deformation properties of unbound granular materials for Pavement ME Design	584-592
Yao, Zeheng / Zhu, Haoran / Gong, Minghui / Yang, Jun / Xu, Gang / Zhong, Yuguo	Characterization of asphalt materials' moisture susceptibility using multiple methods	286-295
Ziolkowski, Mateusz / Kovtun, Maxim	Confined-Direct Electric Curing of NaOH-activated fly ash based brick mixtures under free drainage conditions: Part 1. Factorial experimental design	1050-1062
Sun, Chang / Lange, David A. / Xiao, Jianzhuang / Ding, Tao	Contact behavior between cracked surfaces of recycled aggregate concrete	1168-1178
Goel, Gaurav / Kalamdhad, Ajay S.	Degraded municipal solid waste as partial substitute for manufacturing fired bricks	259-266
Tan, Yiqiu / Sun, Zhiqi / Gong, Xiangbing / Xu, Huining / Zhang, Lei / Bi, Yufeng	Design parameter of low-temperature performance for asphalt mixtures in cold regions	1179-1187
Sharma, Rahul / Khan, Rizwan A.	Durability assessment of self compacting concrete incorporating copper slag as fine aggregates	617-629
Dodds, Wayne / Christodoulou, Christian / Goodier, Chris / Austin, Simon / Dunne, David	Durability performance of sustainable structural concrete: Effect of coarse crushed concrete aggregate on rapid chloride migration and accelerated corrosion	511-521
Liu, Yuefei / Fan, Xueping	Dynamic reliability prediction of bridges based on nonlinear MGPF algorithm and SHM data	1242-1249
Zhang, S. S. / Yu, T.	Effect of groove spacing on bond strength of near-surface mounted (NSM) bonded joints with multiple FRP strips	103-113
Xu, Xiong / Yu, Jianying / Zhang, Canlin / Cao, Zhilong / Gu, Yi / Xue, Lihui	Effect of reactive rejuvenators on structure and properties of UV-aged SBS modified bitumen	780-788
Liu, Jinming / Ou, Zhongwen / Mo, Jinchuan / Wang, Yahui / Wu, Hao	The effect of SCMs and SAP on the autogenous shrinkage and hydration process of RPC	239-249
Yu, Changjuan / Wu, Qing / Yang, Jianming	Effect of seawater for mixing on properties of potassium magnesium phosphate cement paste	217-227
Heniegal, Ashraf M. / Amin, Mohamed / Youssef, Hassan	Effect of silica fume and steel slag coarse aggregate on the corrosion resistance of steel bars	846-851
Lu, Zichen / Kong, Xiangming / Zhang, Chaoyang / Xing, Feng / Cai, Yi / Jiang, Lingfei / Zhang, Yanrong / Dong, Biqin	Effect of surface modification of colloidal particles in polymer latexes on cement hydration	1147-1157
Zhang, Yan-rong / Cai, Xiao-Pei / Kong, Xiang-ming / Gao, Liang	Effects of comb-shaped superplasticizers with different charge characteristics on the microstructure and properties of fresh cement pastes	441-450
Pazeto, A. A. / Amaral, P. M. / Pinheiro, J. R. / Paraguassú, A. B.	Effects of glass fiber-reinforcement on the mechanical properties of coarse grained building stone	79-87
Jain, Saumitra / Chellapandian, M. / Prakash, S. Suriya	Emergency repair of severely damaged reinforced concrete column elements under axial compression: An experimental study	751-761
Zhang, Henglong / Chen, Zihao / Li, Lu / Zhu, Chongzheng	Evaluation of aging behaviors of asphalt with different thermochromic powders	1198-1205
Fursa, T. V. / Dann, D. D. / Petrov, M. V.	Evaluation of freeze-thaw damage to reinforced concrete based on the parameters of electric response to mechanical impact	451-462
Bisht, Kunal / Ramana, P. V.	Evaluation of mechanical and durability properties of crumb rubber concrete	811-817
Wu, Shaopeng / Zhao, Zhijie / Xiao, Yue / Yi, Mingwei / Chen, Zongwu / Li, Mingliang	Evaluation of mechanical properties and aging index of 10-year field aged asphalt materials	1158-1167
Jafari, Khashayar / Toufigh, Vahab	Experimental and analytical evaluation of rubberized polymer concrete	495-510
Guo, Hui / Guo, Weiguo / Zhai, Yue / Su, Yu	Experimental and modeling investigation on the dynamic response of granite after high-temperature treatment under different pressures	427-440
Mamand, H. / Chen, J. / Barnett, S. J.	Experimental and modelling investigation of mechanical behaviour of ageing concrete	1138-1146
Rahgozar, Arash / Hosseini, Abdollah	Experimental and numerical assessment of in-plane monotonic response of ancient mortar brick masonry	892-909
Fan, Shenggang / Jia, Lianlian / Lyu, Xiao / Sun, Wenjun / Chen, Meihe / Zheng, Jiacheng	Experimental investigation of austenitic stainless steel material at elevated temperatures	267-285
Ju, Yang / Tian, Kaipei / Liu, Hongbin / Reinhardt, Hans-Wolf / Wang, Li	Experimental investigation of the effect of silica fume on the thermal spalling of reactive powder concrete	571-583
Sun, Wenjuan / Liu, Yufeng / Stephen Lane, D. / Nair, Harikrishnan / Wang, Linbing	Experimental investigation of the relationship between mineral content and aggregate morphological characteristics using the improved FTI system and XRD method	981-991
Yin, Hor / Teo, Wee / Shirai, Kazutaka	Experimental investigation on the behaviour of reinforced concrete slabs strengthened with ultra-high performance concrete	463-474
Wang, X. F. / Fang, C. / Kuang, W. Q. / Li, D. W. / Han, N. X. / Xing, F.	Experimental investigation on the compressive strength and shrinkage of concrete with pre-wetted lightweight aggregates	867-879
Huang, Zujian / Sun, Yimin / Musso, Florian	Experimental study on bamboo hygrothermal properties and the impact of bamboo-based panel process	1112-1125
Wang, Chao / Wang, Hao / Zhao, Lidong / Cao, Dongwei	Experimental study on rheological characteristics and performance of high modulus asphalt binder with different modifiers	26-36
Zhao, Yanhua / Gong, Jinxin / Zhao, Sumei	Experimental study on shrinkage of HPC containing fly ash and ground granulated blast-furnace slag	145-153
Zhou, Yingwu / Dang, Leijun / Sui, Lili / Li, Dawang / Zhao, Xuemei / Xing, Feng / Wu, Yufei	Experimental study on the bond behavior between corroded rebar and concrete under dual action of FRP confinement and sustained loading	605-616
Bonicelli, Alessandra / Calvi, Paolo / Martinez-Arguelles, Gilberto / Fuentes, Luis / Giustozzi, Filippo	Experimental study on the use of rejuvenators and plastomeric polymers for improving durability of high RAP content asphalt mixtures	37-44
Yu, Qian-Qian / Wu, Yu-Fei	Fatigue durability of cracked steel beams retrofitted with high-strength materials	1188-1197
Mohammed, Azad A.	Flexural behavior and analysis of reinforced concrete beams made of recycled PET waste concrete	593-604
Tanarslan, H. M. / Alver, N. / Jahangiri, R. / Yalçınkaya, Ç. / Yazıcı, H.	Flexural strengthening of RC beams using UHPFRC laminates: Bonding techniques and rebar addition	45-55
Aliha, M. R. M. / Sarbijan, M. J. / Bahmani, A.	Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations	789-799
Yang, Tao / Wu, Qisheng / Zhu, Huajun / Zhang, Zuhua	Geopolymer with improved thermal stability by incorporating high-magnesium nickel slag	475-484
Lampropoulos, Kyriakos C. / Moropoulou, Antonia / Korres, Manolis	Ground penetrating radar prospection of the construction phases of the Holy Aedicula of the Holy Sepulchre in correlation with architectural analysis	307-322
Zhang, Lina / Cheng, Xin / Hou, Dongshuai / Guo, Siyao	Hydration for the Alite mineral: Morphology evolution, reaction mechanism and the compositional influences	413-426
Nguyen, Dang Mao / Grillet, Anne-Cécile / Diep, Thi My Hanh / Ha Thuc, Chi Nhan / Woloszyn, Monika	Hygrothermal properties of bio-insulation building materials based on bamboo fibers and bio-glues	852-866
Miranda, Tiago / Silva, Rui A. / Oliveira, Daniel V. / Leitão, Dinis / Cristelo, Nuno / Oliveira, Juliana / Soares, Edgar	ICEBs stabilised with alkali-activated fly ash as a renewed approach for green building: Exploitation of the masonry mechanical performance	65-78
Law, David W. / Molyneaux, Thomas C. K.	Impact of corrosion on bond in uncracked concrete with confined and unconfined rebar	550-559
Zhang, Jun / Simate, Geoffrey S. / Hu, Xiaodi / Souliman, Mena / Walubita, Lubinda F.	Impact of recycled asphalt materials on asphalt binder properties and rutting and cracking performance of plant-produced mixtures	654-663
Corradini, A. / Cerni, G. / D'Alessandro, A. / Ubertini, F.	Improved understanding of grouted mixture fatigue behavior under indirect tensile test configuration	910-918
Kapeluszna, Ewa / Kotwica, Łukasz / Różycka, Agnieszka / Gołek, Łukasz	Incorporation of Al in C-A-S-H gels with various Ca/Si and Al/Si ratio: Microstructural and structural characteristics with DTA/TG, XRD, FTIR and TEM analysis	643-653
Maes, Mathias / De Belie, Nele	Influence of chlorides on magnesium sulphate attack for mortars with Portland cement and slag based binders	630-642
Edwin, Romy Suryaningrat / Gruyaert, Elke / De Belie, Nele	Influence of intensive vacuum mixing and heat treatment on compressive strength and microstructure of reactive powder concrete incorporating secondary copper slag as supplementary cementitious material	400-412
Erdoğan, Sinan T. / Koçak, Tümay Ç.	Influence of slag fineness on the strength and heat evolution of multiple-clinker blended cements	800-810
Loo, Wei Y. / Quenneville, Pierre / Chouw, Nawawi	The influence of surface preparation and the lubricating effect of mill scale on the performance of slip-friction connectors	1025-1038
Tong, Zheng / Gao, Jie / Zhang, Haitao	Innovation for evaluating aggregate angularity based upon 3D convolutional neural network	919-929
Xie, Z. L. / Zhou, H. F. / Lu, L. J. / Chen, Z. A.	An investigation into fracture behavior of geopolymer concrete with digital image correlation technique	371-380
Sherafati, Mohammad Amir / Sohrabi, Mohammad Reza	An investigation into the time dependency of shear strength of clay brick walls; an approximate approach	88-102
Cao, Weidong / Liu, Shutang / Li, Xinxin	Laboratory evaluation of the effect of composite modifier on the performance of asphalt concrete mixture	363-370
Siddique, Salman / Shrivastava, Sandeep / Chaudhary, Sandeep	Lateral force microscopic examination of interfacial transition zone in ceramic concrete	688-725
Rajan, Sreehari / Sutton, Michael A. / Oseli, Alen / Emri, Igor / Matta, Fabio	Linear viscoelastic creep compliance and retardation spectra of bitumen impregnated fiberglass mat and polymer modified bitumen	664-679
Maldonado-Alameda, A. / Lacasta, A. M. / Giro-Paloma, J. / Chimenos, J. M. / Haurie, L. / Formosa, J.	Magnesium phosphate cements formulated with low grade magnesium oxide incorporating phase change materials for thermal energy storage	209-216
Mercado, Ronald / Fuentes, Luis	Measure of asphalt emulsions stability by oscillatory rheology	838-845
Zuo, Jiandong / Li, Huabing / Dong, Biqin / Luo, Chaoyun / Chen, Dazhu	Mechanical properties and resistance to chloride ion permeability of epoxy emulsion cement mortar reinforced by glass flake	137-144
Wu, Bo / Li, Zhen	Mechanical properties of compound concrete containing demolished concrete lumps after freeze-thaw cycles	187-199
Mazhoud, Brahim / Collet, Florence / Pretot, Sylvie / Lanos, Christophe	Mechanical properties of hemp-clay and hemp stabilized clay composites	1126-1137
Ismail, Sallehan / Hoe Kwan, Wai / Ramli, Mahyuddin	Mechanical strength and durability properties of concrete containing treated recycled concrete aggregates under different curing conditions	296-306
Apostolopoulou, Maria / Aggelakopoulou, Eleni / Siouta, Louiza / Bakolas, Asterios / Douvika, Maria / Asteris, Panagiotis G. / Moropoulou, Antonia	A methodological approach for the selection of compatible and performable restoration mortars in seismic hazard areas	1-14
Al-Mansoori, T. / Micaelo, R. / Artamendi, I. / Norambuena-Contreras, J. / Garcia, A.	Microcapsules for self-healing of asphalt mixture without compromising mechanical performance	1091-1100
Mahmud, Mohd Zul Hanif / Hassan, Norhidayah Abdul / Hainin, Mohd Rosli / Ismail, Che Ros	Microstructural investigation on air void properties of porous asphalt using virtual cut section	485-494
Guzmán, Santiago / Gálvez, Jaime C.	Modelling of concrete cover cracking due to non-uniform corrosion of reinforcing steel	1063-1071
Zhang, Yunsheng / Liu, Cheng / Liu, Zhiyong / Liu, Guojian / Yang, Lin	Modelling of diffusion behavior of ions in low-density and high-density calcium silicate hydrate	965-980
Sadeghi-Nik, Aref / Berenjian, Javad / Bahari, Ali / Safaei, Abdul Sattar / Dehestani, Mehdi	Modification of microstructure and mechanical properties of cement by nanoparticles through a sustainable development approach	880-891
Cepelka, Martin / Malo, Kjell Arne	Moment resisting splice of timber beams using long threaded rods and grout-filled couplers – Experimental results and predictive models	560-570
Cheng, Shukai / Shui, Zhonghe / Yu, Rui / Sun, Tao / Zhang, Xiao	Multiple influences of internal curing and supplementary cementitious materials on the shrinkage and microstructure development of reefs aggregate concrete	522-530
Pereiro-Barceló, Javier / Bonet, José L.	Ni-Ti SMA bars behaviour under compression	348-362
Hong, Jian / Fang, Qin / Chen, Li / Kong, Xiangzhen	Numerical predictions of concrete slabs under contact explosion by modified K&C material model	1013-1024
Shah, Asif H. / Sharma, U. K. / Bhargava, Pradeep	Outcomes of a major research on full scale testing of RC frames in post earthquake fire	1224-1241
Shi, Jinjie / Ming, Jing / Sun, Wei	Passivation and chloride-induced corrosion of a duplex alloy steel in alkali-activated slag extract solutions	992-1002
Al-Mansob, Ramez A. / Ismail, Amiruddin / Rahmat, Riza Atiq O. K. / Borhan, Muhamad Nazri / Alsharef, Jamal M. A. / Albrka, Shaban Ismael / Karim, Mohamed Rehan	The performance of Epoxidised Natural Rubber modified asphalt using nano-alumina as additive	680-687
Min, Zhaohui / Xia, Yuyu / Li, Xiaochen / Tao, Zan	Performances evaluation of epoxy asphalt mixture containing snow-melting agent	762-769
Zuo, Jiandong / Zhan, Jia / Dong, Biqin / Luo, Chaoyun / Liu, Qiuhong / Chen, Dazhu	Preparation of metal hydroxide microcapsules and the effect on pH value of concrete	323-331
Sindu, B. S. / Sasmal, Saptarshi	Properties of carbon nanotube reinforced cement composite synthesized using different types of surfactants	389-399
Alonge, O. Richard / Ramli, Mahyuddin B. / Lawalson, T. John	Properties of hybrid cementitious composite with metakaolin, nanosilica and epoxy	740-750
Barnat-Hunek, Danuta / Siddique, Rafat / Łagód, Grzegorz	Properties of hydrophobised lightweight mortars with expanded cork	15-25
Sfarra, Stefano / Perilli, Stefano / Ambrosini, Dario / Paoletti, Domenica / Nardi, Iole / de Rubeis, Tullio / Santulli, Carlo	A proposal of a new material for greenhouses on the basis of numerical, optical, thermal and mechanical approaches	332-347
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Wang, Zi-Ke	A refined prediction method for the long-term performance of BFRP bars serviced in field environments	1072-1080
Xiao, Junhua / Zhang, De / Wei, Kai / Luo, Zhe	Shakedown behaviors of railway ballast under cyclic loading	1206-1214
François, Bertrand / Palazon, Lucia / Gerard, Pierre	Structural behaviour of unstabilized rammed earth constructions submitted to hygroscopic conditions	164-175
Li, Zaibo / Zhao, Xuguang / He, Tusheng / Zhao, Sanyin / Liu, Yang / Qu, Xiaoling	A study of high-performance slag-based composite admixtures	126-136
Micaelo, R. / Guerra, A. / Quaresma, L. / Cidade, M. T.	Study of the effect of filler on the fatigue behaviour of bitumen-filler mastics under DSR testing	228-238
Sujjavanich, S. / Suwanvitaya, P. / Chaysuwan, D. / Heness, G.	Synergistic effect of metakaolin and fly ash on properties of concrete	830-837
Wang, Hao / Zhu, Mengguang / Sun, Yongqi / Ji, Ru / Liu, Lili / Wang, Xidong	Synthesis of a ceramic tile base based on high-alumina fly ash	930-938
Xue, Xiao / Li, Yanwen / Yang, Zhuo / He, Zhongyu / Dai, Jian-Guo / Xu, Lijin / Zhang, Weidong	A systematic investigation of the waterproofing performance and chloride resistance of a self-developed waterborne silane-based hydrophobic agent for mortar and concrete	939-946
Javilla, Barugahare / Fang, Hao / Mo, Liantong / Shu, Benan / Wu, Shaopeng	Test evaluation of rutting performance indicators of asphalt mixtures	1215-1223
Kalender, M.	Thin-layer infrared drying characteristics of construction gypsum plaster and selection of a suitable drying model	947-955
Xi, Xun / Yang, Shangtong	Time to surface cracking and crack width of reinforced concrete structures under corrosion of multiple rebars	114-125
Meng, Ercong / Yu, Yalin / Yuan, Jun / Qiao, Ke / Su, Yisheng	Triaxial compressive strength experiment study of recycled aggregate concrete after high temperatures	542-549
Bita, Hassan / Faiz, Bouazza / Moudden, Ali / Lotfi, Hicham / Ouacha, El Houssaine / Banouni, Hicham	Ultrasound monitoring of a mortar hydration using Argand Diagram: The effect of sand grain size and temperature	1003-1012
Lahoti, Mukund / Wong, Keng Khang / Tan, Kang Hai / Yang, En-Hua	Use of alkali-silica reactive sedimentary rock powder as a resource to produce high strength geopolymer binder	381-388
Xiao, Jianzhuang / Qiang, Chengbing / Nanni, Antonio / Zhang, Kaijian	Use of sea-sand and seawater in concrete construction: Current status and future opportunities	1101-1111
Sussmann, T. R. / Thompson, H. B. / Stark, T. D. / Wilk, S. T. / Ho, C. L.	Use of seismic surface wave testing to assess track substructure condition	1250-1255
Winnefeld, Frank / Martin, Lukas H. J. / Müller, Christian J. / Lothenbach, Barbara	Using gypsum to control hydration kinetics of CSA cements	154-163
Yang, Yonghao / Wei, Zuoan / Chen, Yu-long / Li, Yunju / Li, Xiaoyan	Utilizing phosphate mine tailings to produce ceramisite	1081-1090
Li, Hedong / Xu, Shilang / Zeng, Qiang	Waterproof ultra-high toughness cementitious composites containing nano reservoir silts	770-779
Lin, Jian-Ping / Wu, Yu-Fei / Smith, Scott T.	Width factor for externally bonded FRP-to-concrete joints	818-829

About this
data sheet
IssueID
22641
Published on:
14/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.