Construction and Building Materials - novembre 2017

Publié:	novembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Heichelheim, Eric W. / Montoya, Lupita D. / Hubler, Mija H.	Aerosol generation in compressive concrete fragmentation	1039-1049
Xue, Jinshun / Jiang, Yingjun	Analysis on the fatigue properties of vertical vibration compacted lime–fly ash-stabilized macadam	531-541
Le, Duc-Hien / Sheen, Yeong-Nain / Bui, Quoc-Bao	An assessment on volume stabilization of mortar with stainless steel slag sand	200-208
Zia, Asad / Ali, Majid	Behavior of fiber reinforced concrete for controlling the rate of cracking in canal-lining	726-739
Wang, Wenjie / Chouw, Nawawi	Behaviour of CFRC beams strengthened by FFRP laminates under static and impact loadings	956-964
He, Jun / Xian, Guijun	Bond-slip behavior of fiber reinforced polymer strips-steel interface	250-258
Guerreiro, João / Proença, Jorge M. / Ferreira, João Gomes / Gago, António Sousa	Bonding and anchoring of a CFRP reinforced render for the external strengthening of old masonry buildings	56-64
Pham, Thai-Hoan / Kim, Seung-Eock	Characteristics of microstructural phases relevant to the mechanical properties in structural steel weld zone studied by using indentation	176-186
Gu, Fan / Zhang, Yuqing / Luo, Xue / Sahin, Hakan / Lytton, Robert L.	Characterization and prediction of permanent deformation properties of unbound granular materials for Pavement ME Design	584-592
Yao, Zeheng / Zhu, Haoran / Gong, Minghui / Yang, Jun / Xu, Gang / Zhong, Yuguo	Characterization of asphalt materials' moisture susceptibility using multiple methods	286-295
Ziolkowski, Mateusz / Kovtun, Maxim	Confined-Direct Electric Curing of NaOH-activated fly ash based brick mixtures under free drainage conditions: Part 1. Factorial experimental design	1050-1062
Sun, Chang / Lange, David A. / Xiao, Jianzhuang / Ding, Tao	Contact behavior between cracked surfaces of recycled aggregate concrete	1168-1178
Goel, Gaurav / Kalamdhad, Ajay S.	Degraded municipal solid waste as partial substitute for manufacturing fired bricks	259-266
Tan, Yiqiu / Sun, Zhiqi / Gong, Xiangbing / Xu, Huining / Zhang, Lei / Bi, Yufeng	Design parameter of low-temperature performance for asphalt mixtures in cold regions	1179-1187
Sharma, Rahul / Khan, Rizwan A.	Durability assessment of self compacting concrete incorporating copper slag as fine aggregates	617-629
Dodds, Wayne / Christodoulou, Christian / Goodier, Chris / Austin, Simon / Dunne, David	Durability performance of sustainable structural concrete: Effect of coarse crushed concrete aggregate on rapid chloride migration and accelerated corrosion	511-521
Liu, Yuefei / Fan, Xueping	Dynamic reliability prediction of bridges based on nonlinear MGPF algorithm and SHM data	1242-1249
Zhang, S. S. / Yu, T.	Effect of groove spacing on bond strength of near-surface mounted (NSM) bonded joints with multiple FRP strips	103-113
Xu, Xiong / Yu, Jianying / Zhang, Canlin / Cao, Zhilong / Gu, Yi / Xue, Lihui	Effect of reactive rejuvenators on structure and properties of UV-aged SBS modified bitumen	780-788
Liu, Jinming / Ou, Zhongwen / Mo, Jinchuan / Wang, Yahui / Wu, Hao	The effect of SCMs and SAP on the autogenous shrinkage and hydration process of RPC	239-249
Yu, Changjuan / Wu, Qing / Yang, Jianming	Effect of seawater for mixing on properties of potassium magnesium phosphate cement paste	217-227
Heniegal, Ashraf M. / Amin, Mohamed / Youssef, Hassan	Effect of silica fume and steel slag coarse aggregate on the corrosion resistance of steel bars	846-851
Lu, Zichen / Kong, Xiangming / Zhang, Chaoyang / Xing, Feng / Cai, Yi / Jiang, Lingfei / Zhang, Yanrong / Dong, Biqin	Effect of surface modification of colloidal particles in polymer latexes on cement hydration	1147-1157
Zhang, Yan-rong / Cai, Xiao-Pei / Kong, Xiang-ming / Gao, Liang	Effects of comb-shaped superplasticizers with different charge characteristics on the microstructure and properties of fresh cement pastes	441-450
Pazeto, A. A. / Amaral, P. M. / Pinheiro, J. R. / Paraguassú, A. B.	Effects of glass fiber-reinforcement on the mechanical properties of coarse grained building stone	79-87
Jain, Saumitra / Chellapandian, M. / Prakash, S. Suriya	Emergency repair of severely damaged reinforced concrete column elements under axial compression: An experimental study	751-761
Zhang, Henglong / Chen, Zihao / Li, Lu / Zhu, Chongzheng	Evaluation of aging behaviors of asphalt with different thermochromic powders	1198-1205
Fursa, T. V. / Dann, D. D. / Petrov, M. V.	Evaluation of freeze-thaw damage to reinforced concrete based on the parameters of electric response to mechanical impact	451-462
Bisht, Kunal / Ramana, P. V.	Evaluation of mechanical and durability properties of crumb rubber concrete	811-817
Wu, Shaopeng / Zhao, Zhijie / Xiao, Yue / Yi, Mingwei / Chen, Zongwu / Li, Mingliang	Evaluation of mechanical properties and aging index of 10-year field aged asphalt materials	1158-1167
Jafari, Khashayar / Toufigh, Vahab	Experimental and analytical evaluation of rubberized polymer concrete	495-510
Guo, Hui / Guo, Weiguo / Zhai, Yue / Su, Yu	Experimental and modeling investigation on the dynamic response of granite after high-temperature treatment under different pressures	427-440
Mamand, H. / Chen, J. / Barnett, S. J.	Experimental and modelling investigation of mechanical behaviour of ageing concrete	1138-1146
Rahgozar, Arash / Hosseini, Abdollah	Experimental and numerical assessment of in-plane monotonic response of ancient mortar brick masonry	892-909
Fan, Shenggang / Jia, Lianlian / Lyu, Xiao / Sun, Wenjun / Chen, Meihe / Zheng, Jiacheng	Experimental investigation of austenitic stainless steel material at elevated temperatures	267-285
Ju, Yang / Tian, Kaipei / Liu, Hongbin / Reinhardt, Hans-Wolf / Wang, Li	Experimental investigation of the effect of silica fume on the thermal spalling of reactive powder concrete	571-583
Sun, Wenjuan / Liu, Yufeng / Stephen Lane, D. / Nair, Harikrishnan / Wang, Linbing	Experimental investigation of the relationship between mineral content and aggregate morphological characteristics using the improved FTI system and XRD method	981-991
Yin, Hor / Teo, Wee / Shirai, Kazutaka	Experimental investigation on the behaviour of reinforced concrete slabs strengthened with ultra-high performance concrete	463-474
Wang, X. F. / Fang, C. / Kuang, W. Q. / Li, D. W. / Han, N. X. / Xing, F.	Experimental investigation on the compressive strength and shrinkage of concrete with pre-wetted lightweight aggregates	867-879
Huang, Zujian / Sun, Yimin / Musso, Florian	Experimental study on bamboo hygrothermal properties and the impact of bamboo-based panel process	1112-1125
Wang, Chao / Wang, Hao / Zhao, Lidong / Cao, Dongwei	Experimental study on rheological characteristics and performance of high modulus asphalt binder with different modifiers	26-36
Zhao, Yanhua / Gong, Jinxin / Zhao, Sumei	Experimental study on shrinkage of HPC containing fly ash and ground granulated blast-furnace slag	145-153
Zhou, Yingwu / Dang, Leijun / Sui, Lili / Li, Dawang / Zhao, Xuemei / Xing, Feng / Wu, Yufei	Experimental study on the bond behavior between corroded rebar and concrete under dual action of FRP confinement and sustained loading	605-616
Bonicelli, Alessandra / Calvi, Paolo / Martinez-Arguelles, Gilberto / Fuentes, Luis / Giustozzi, Filippo	Experimental study on the use of rejuvenators and plastomeric polymers for improving durability of high RAP content asphalt mixtures	37-44
Yu, Qian-Qian / Wu, Yu-Fei	Fatigue durability of cracked steel beams retrofitted with high-strength materials	1188-1197
Mohammed, Azad A.	Flexural behavior and analysis of reinforced concrete beams made of recycled PET waste concrete	593-604
Tanarslan, H. M. / Alver, N. / Jahangiri, R. / Yalçınkaya, Ç. / Yazıcı, H.	Flexural strengthening of RC beams using UHPFRC laminates: Bonding techniques and rebar addition	45-55
Aliha, M. R. M. / Sarbijan, M. J. / Bahmani, A.	Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations	789-799
Yang, Tao / Wu, Qisheng / Zhu, Huajun / Zhang, Zuhua	Geopolymer with improved thermal stability by incorporating high-magnesium nickel slag	475-484
Lampropoulos, Kyriakos C. / Moropoulou, Antonia / Korres, Manolis	Ground penetrating radar prospection of the construction phases of the Holy Aedicula of the Holy Sepulchre in correlation with architectural analysis	307-322
Zhang, Lina / Cheng, Xin / Hou, Dongshuai / Guo, Siyao	Hydration for the Alite mineral: Morphology evolution, reaction mechanism and the compositional influences	413-426
Nguyen, Dang Mao / Grillet, Anne-Cécile / Diep, Thi My Hanh / Ha Thuc, Chi Nhan / Woloszyn, Monika	Hygrothermal properties of bio-insulation building materials based on bamboo fibers and bio-glues	852-866
Miranda, Tiago / Silva, Rui A. / Oliveira, Daniel V. / Leitão, Dinis / Cristelo, Nuno / Oliveira, Juliana / Soares, Edgar	ICEBs stabilised with alkali-activated fly ash as a renewed approach for green building: Exploitation of the masonry mechanical performance	65-78
Law, David W. / Molyneaux, Thomas C. K.	Impact of corrosion on bond in uncracked concrete with confined and unconfined rebar	550-559
Zhang, Jun / Simate, Geoffrey S. / Hu, Xiaodi / Souliman, Mena / Walubita, Lubinda F.	Impact of recycled asphalt materials on asphalt binder properties and rutting and cracking performance of plant-produced mixtures	654-663
Corradini, A. / Cerni, G. / D'Alessandro, A. / Ubertini, F.	Improved understanding of grouted mixture fatigue behavior under indirect tensile test configuration	910-918
Kapeluszna, Ewa / Kotwica, Łukasz / Różycka, Agnieszka / Gołek, Łukasz	Incorporation of Al in C-A-S-H gels with various Ca/Si and Al/Si ratio: Microstructural and structural characteristics with DTA/TG, XRD, FTIR and TEM analysis	643-653
Maes, Mathias / De Belie, Nele	Influence of chlorides on magnesium sulphate attack for mortars with Portland cement and slag based binders	630-642
Edwin, Romy Suryaningrat / Gruyaert, Elke / De Belie, Nele	Influence of intensive vacuum mixing and heat treatment on compressive strength and microstructure of reactive powder concrete incorporating secondary copper slag as supplementary cementitious material	400-412
Erdoğan, Sinan T. / Koçak, Tümay Ç.	Influence of slag fineness on the strength and heat evolution of multiple-clinker blended cements	800-810
Loo, Wei Y. / Quenneville, Pierre / Chouw, Nawawi	The influence of surface preparation and the lubricating effect of mill scale on the performance of slip-friction connectors	1025-1038
Tong, Zheng / Gao, Jie / Zhang, Haitao	Innovation for evaluating aggregate angularity based upon 3D convolutional neural network	919-929
Xie, Z. L. / Zhou, H. F. / Lu, L. J. / Chen, Z. A.	An investigation into fracture behavior of geopolymer concrete with digital image correlation technique	371-380
Sherafati, Mohammad Amir / Sohrabi, Mohammad Reza	An investigation into the time dependency of shear strength of clay brick walls; an approximate approach	88-102
Cao, Weidong / Liu, Shutang / Li, Xinxin	Laboratory evaluation of the effect of composite modifier on the performance of asphalt concrete mixture	363-370
Siddique, Salman / Shrivastava, Sandeep / Chaudhary, Sandeep	Lateral force microscopic examination of interfacial transition zone in ceramic concrete	688-725
Rajan, Sreehari / Sutton, Michael A. / Oseli, Alen / Emri, Igor / Matta, Fabio	Linear viscoelastic creep compliance and retardation spectra of bitumen impregnated fiberglass mat and polymer modified bitumen	664-679
Maldonado-Alameda, A. / Lacasta, A. M. / Giro-Paloma, J. / Chimenos, J. M. / Haurie, L. / Formosa, J.	Magnesium phosphate cements formulated with low grade magnesium oxide incorporating phase change materials for thermal energy storage	209-216
Mercado, Ronald / Fuentes, Luis	Measure of asphalt emulsions stability by oscillatory rheology	838-845
Zuo, Jiandong / Li, Huabing / Dong, Biqin / Luo, Chaoyun / Chen, Dazhu	Mechanical properties and resistance to chloride ion permeability of epoxy emulsion cement mortar reinforced by glass flake	137-144
Wu, Bo / Li, Zhen	Mechanical properties of compound concrete containing demolished concrete lumps after freeze-thaw cycles	187-199
Mazhoud, Brahim / Collet, Florence / Pretot, Sylvie / Lanos, Christophe	Mechanical properties of hemp-clay and hemp stabilized clay composites	1126-1137
Ismail, Sallehan / Hoe Kwan, Wai / Ramli, Mahyuddin	Mechanical strength and durability properties of concrete containing treated recycled concrete aggregates under different curing conditions	296-306
Apostolopoulou, Maria / Aggelakopoulou, Eleni / Siouta, Louiza / Bakolas, Asterios / Douvika, Maria / Asteris, Panagiotis G. / Moropoulou, Antonia	A methodological approach for the selection of compatible and performable restoration mortars in seismic hazard areas	1-14
Al-Mansoori, T. / Micaelo, R. / Artamendi, I. / Norambuena-Contreras, J. / Garcia, A.	Microcapsules for self-healing of asphalt mixture without compromising mechanical performance	1091-1100
Mahmud, Mohd Zul Hanif / Hassan, Norhidayah Abdul / Hainin, Mohd Rosli / Ismail, Che Ros	Microstructural investigation on air void properties of porous asphalt using virtual cut section	485-494
Guzmán, Santiago / Gálvez, Jaime C.	Modelling of concrete cover cracking due to non-uniform corrosion of reinforcing steel	1063-1071
Zhang, Yunsheng / Liu, Cheng / Liu, Zhiyong / Liu, Guojian / Yang, Lin	Modelling of diffusion behavior of ions in low-density and high-density calcium silicate hydrate	965-980
Sadeghi-Nik, Aref / Berenjian, Javad / Bahari, Ali / Safaei, Abdul Sattar / Dehestani, Mehdi	Modification of microstructure and mechanical properties of cement by nanoparticles through a sustainable development approach	880-891
Cepelka, Martin / Malo, Kjell Arne	Moment resisting splice of timber beams using long threaded rods and grout-filled couplers – Experimental results and predictive models	560-570
Cheng, Shukai / Shui, Zhonghe / Yu, Rui / Sun, Tao / Zhang, Xiao	Multiple influences of internal curing and supplementary cementitious materials on the shrinkage and microstructure development of reefs aggregate concrete	522-530
Pereiro-Barceló, Javier / Bonet, José L.	Ni-Ti SMA bars behaviour under compression	348-362
Hong, Jian / Fang, Qin / Chen, Li / Kong, Xiangzhen	Numerical predictions of concrete slabs under contact explosion by modified K&C material model	1013-1024
Shah, Asif H. / Sharma, U. K. / Bhargava, Pradeep	Outcomes of a major research on full scale testing of RC frames in post earthquake fire	1224-1241
Shi, Jinjie / Ming, Jing / Sun, Wei	Passivation and chloride-induced corrosion of a duplex alloy steel in alkali-activated slag extract solutions	992-1002
Al-Mansob, Ramez A. / Ismail, Amiruddin / Rahmat, Riza Atiq O. K. / Borhan, Muhamad Nazri / Alsharef, Jamal M. A. / Albrka, Shaban Ismael / Karim, Mohamed Rehan	The performance of Epoxidised Natural Rubber modified asphalt using nano-alumina as additive	680-687
Min, Zhaohui / Xia, Yuyu / Li, Xiaochen / Tao, Zan	Performances evaluation of epoxy asphalt mixture containing snow-melting agent	762-769
Zuo, Jiandong / Zhan, Jia / Dong, Biqin / Luo, Chaoyun / Liu, Qiuhong / Chen, Dazhu	Preparation of metal hydroxide microcapsules and the effect on pH value of concrete	323-331
Sindu, B. S. / Sasmal, Saptarshi	Properties of carbon nanotube reinforced cement composite synthesized using different types of surfactants	389-399
Alonge, O. Richard / Ramli, Mahyuddin B. / Lawalson, T. John	Properties of hybrid cementitious composite with metakaolin, nanosilica and epoxy	740-750
Barnat-Hunek, Danuta / Siddique, Rafat / Łagód, Grzegorz	Properties of hydrophobised lightweight mortars with expanded cork	15-25
Sfarra, Stefano / Perilli, Stefano / Ambrosini, Dario / Paoletti, Domenica / Nardi, Iole / de Rubeis, Tullio / Santulli, Carlo	A proposal of a new material for greenhouses on the basis of numerical, optical, thermal and mechanical approaches	332-347
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Wang, Zi-Ke	A refined prediction method for the long-term performance of BFRP bars serviced in field environments	1072-1080
Xiao, Junhua / Zhang, De / Wei, Kai / Luo, Zhe	Shakedown behaviors of railway ballast under cyclic loading	1206-1214
François, Bertrand / Palazon, Lucia / Gerard, Pierre	Structural behaviour of unstabilized rammed earth constructions submitted to hygroscopic conditions	164-175
Li, Zaibo / Zhao, Xuguang / He, Tusheng / Zhao, Sanyin / Liu, Yang / Qu, Xiaoling	A study of high-performance slag-based composite admixtures	126-136
Micaelo, R. / Guerra, A. / Quaresma, L. / Cidade, M. T.	Study of the effect of filler on the fatigue behaviour of bitumen-filler mastics under DSR testing	228-238
Sujjavanich, S. / Suwanvitaya, P. / Chaysuwan, D. / Heness, G.	Synergistic effect of metakaolin and fly ash on properties of concrete	830-837
Wang, Hao / Zhu, Mengguang / Sun, Yongqi / Ji, Ru / Liu, Lili / Wang, Xidong	Synthesis of a ceramic tile base based on high-alumina fly ash	930-938
Xue, Xiao / Li, Yanwen / Yang, Zhuo / He, Zhongyu / Dai, Jian-Guo / Xu, Lijin / Zhang, Weidong	A systematic investigation of the waterproofing performance and chloride resistance of a self-developed waterborne silane-based hydrophobic agent for mortar and concrete	939-946
Javilla, Barugahare / Fang, Hao / Mo, Liantong / Shu, Benan / Wu, Shaopeng	Test evaluation of rutting performance indicators of asphalt mixtures	1215-1223
Kalender, M.	Thin-layer infrared drying characteristics of construction gypsum plaster and selection of a suitable drying model	947-955
Xi, Xun / Yang, Shangtong	Time to surface cracking and crack width of reinforced concrete structures under corrosion of multiple rebars	114-125
Meng, Ercong / Yu, Yalin / Yuan, Jun / Qiao, Ke / Su, Yisheng	Triaxial compressive strength experiment study of recycled aggregate concrete after high temperatures	542-549
Bita, Hassan / Faiz, Bouazza / Moudden, Ali / Lotfi, Hicham / Ouacha, El Houssaine / Banouni, Hicham	Ultrasound monitoring of a mortar hydration using Argand Diagram: The effect of sand grain size and temperature	1003-1012
Lahoti, Mukund / Wong, Keng Khang / Tan, Kang Hai / Yang, En-Hua	Use of alkali-silica reactive sedimentary rock powder as a resource to produce high strength geopolymer binder	381-388
Xiao, Jianzhuang / Qiang, Chengbing / Nanni, Antonio / Zhang, Kaijian	Use of sea-sand and seawater in concrete construction: Current status and future opportunities	1101-1111
Sussmann, T. R. / Thompson, H. B. / Stark, T. D. / Wilk, S. T. / Ho, C. L.	Use of seismic surface wave testing to assess track substructure condition	1250-1255
Winnefeld, Frank / Martin, Lukas H. J. / Müller, Christian J. / Lothenbach, Barbara	Using gypsum to control hydration kinetics of CSA cements	154-163
Yang, Yonghao / Wei, Zuoan / Chen, Yu-long / Li, Yunju / Li, Xiaoyan	Utilizing phosphate mine tailings to produce ceramisite	1081-1090
Li, Hedong / Xu, Shilang / Zeng, Qiang	Waterproof ultra-high toughness cementitious composites containing nano reservoir silts	770-779
Lin, Jian-Ping / Wu, Yu-Fei / Smith, Scott T.	Width factor for externally bonded FRP-to-concrete joints	818-829

Informations
sur cette fiche
IssueID
22641
Publié(e) le:
14.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.