Construction and Building Materials - November 2017

Published:	November 2017

Articles in this Issue

Author(s)	Title	Page(s)
Pan, Jianrong / Chen, Shizhe / Lai, Zhichao / Wang, Zhan / Wang, Junqi / Xie, Huashen	Analysis and fracture behavior of welded box beam-to-column connections considering residual stresses	557-566
Mohammed, Alyaa / Al-Saadi, Nihad Tareq Khshain / Al-Mahaidi, Riadh	Assessment of bond strength of NSM CFRP strips embedded in concrete using cementitious adhesive made with graphene oxide	504-513
Fernandes, Francisco M. / Fernandes, Andreia / Pais, Jorge	Assessment of the density and moisture content of asphalt mixtures of road pavements	1216-1225
Huang, Liang / Chen, Liuxin / Yan, Libo / Kasal, Bohumil / Jiang, Yuxin / Liu, Changyi	Behavior of polyester FRP tube encased recycled aggregate concrete with recycled clay brick aggregate: Size and slenderness ratio effects	123-136
Wang, Weilun / Zhang, Mingyang / Tang, Yun / Zhang, Xiaogang / Ding, Xiaobo	Behaviour of high-strength concrete columns confined by spiral reinforcement under uniaxial compression	496-503
Al-Salloum, Yousef / Hadi, S. / Abbas, H. / Almusallam, Tarek / Moslem, M. A.	Bio-induction and bioremediation of cementitious composites using microbial mineral precipitation – A review	857-876
Tekle, Biruk Hailu / Khennane, Amar / Kayali, Obada	Bond behaviour of GFRP reinforcement in alkali activated cement concrete	972-982
Al-Abdwais, Ahmed H. / Al-Mahaidi, Riadh S.	Bond properties between carbon fibre reinforced polymer (CFRP) textile and concrete using modified cement-based adhesive	983-992
Bompa, D. V. / Elghazouli, A. Y.	Bond-slip response of deformed bars in rubberised concrete	884-898
El-Gamal, S. M. A. / El-Hosiny, F. I. / Amin, M. S. / Sayed, D. G.	Ceramic waste as an efficient material for enhancing the fire resistance and mechanical properties of hardened Portland cement pastes	1062-1078
Liang, Ming / Ren, Shisong / Fan, Weiyu / Wang, Hao / Cui, Wenyao / Zhao, Pinhui	Characterization of fume composition and rheological properties of asphalt with crumb rubber activated by microwave and TOR	310-322
Fang, Hao / Liu, Quantao / Mo, Liantong / Javilla, Barugahare / Shu, Benan / Wu, Shaopeng	Characterization of three-stage rutting development of asphalt mixtures	340-348
Afroz, Mahzabin / Patnaikuni, Indubhushan / Venkatesan, Srikanth	Chemical durability and performance of modified basalt fiber in concrete medium	191-203
Dousti, Ali / Beaudoin, James J. / Shekarchi, Mohammad	Chloride binding in hydrated MK, SF and natural zeolite-lime mixtures	1035-1047
Capozzoli, Luigi / Rizzo, Enzo	Combined NDT techniques in civil engineering applications: Laboratory and real test	1139-1150
Araujo, Steven / Beaucamp, Bruno / Delbreilh, Laurent / Dargent, Éric / Fauchard, Cyrille	Compactness/density assessment of newly-paved highway containing recycled asphalt pavement by means of non-nuclear method	1151-1163
Stryk, J. / Matula, R. / Pospíšil, K. / Derobert, X. / Simonin, J. M. / Alani, A. M.	Comparative measurements of ground penetrating radars used for road and bridge diagnostics in the Czech Republic and France	1199-1206
Chen, Zhen / Poon, Chi Sun	Comparative studies on the effects of sewage sludge ash and fly ash on cement hydration and properties of cement mortars	791-803
Xu, Ouming / Rangaraju, Prasad Rao / Wang, Shifeng / Xiao, Feipeng	Comparison of rheological properties and hot storage characteristics of asphalt binders modified with devulcanized ground tire rubber and other modifiers	841-848
Ren, Xiaodan / Liu, Kai / Li, Jie / Gao, Xiangling	Compressive behavior of stirrup-confined concrete under dynamic loading	10-22
Joshaghani, Alireza / Zollinger, Dan G.	Concrete pavements curing evaluation with non-destructive tests	1250-1262
Kulshreshtha, Y. / Schlangen, E. / Jonkers, H. M. / Vardon, P. J. / van Paassen, L. A.	CoRncrete: A corn starch based building material	411-423
Chen, Jun / Li, Zongjin / Jin, Xianyu	Critical features of microstructure development of early-age cement paste revealed by non-contact electrical resistivity measurement	1121-1129
Chen, Fei / Gao, Jianming / Qi, Bing / Shen, Daman	Deterioration mechanism of plain and blended cement mortars partially exposed to sulfate attack	849-856
Kim, Dahae / Kim, Y. Richard	Development of Stress Sweep Rutting (SSR) test for permanent deformation characterization of asphalt mixture	373-383
Pan, Ganghua / Zhan, Mimi / Fu, Minghua / Wang, Yaping / Lu, Xiaojun	Effect of CO2 curing on demolition recycled fine aggregates enhanced by calcium hydroxide pre-soaking	810-818
Hiremath, Parameshwar N. / Yaragal, Subhash C.	Effect of different curing regimes and durations on early strength development of reactive powder concrete	72-87
Over Kaman, Derya / Koroglu, Levent / Ayas, Erhan / Guney, Yucel	The effect of heat-treated boron derivative waste at 600 °C on the mechanical and microstructural properties of cement mortar	743-751
Wan, Hongxia / Song, Dongdong / Liu, Zhiyong / Du, Cuiwei / Zeng, Zhongping / Wang, Zhigao / Ding, De / Li, Xiaogang	Effect of negative half-wave alternating current on stress corrosion cracking behavior and mechanism of X80 pipeline steel in near-neutral solution	580-589
Mendis, Agampodi S. M. / Al-deen, Safat / Ashraf, Mahmud	Effect of rubber particles on the flexural behaviour of reinforced crumbed rubber concrete beams	644-657
Saccani, Andrea / Bignozzi, Maria Chiara / Barbieri, Luisa / Lancellotti, Isabella / Bursi, Elena	Effect of the chemical composition of different types of recycled glass used as aggregates on the ASR performance of cement mortars	804-809
Sienkiewicz, M. / Borzędowska-Labuda, K. / Zalewski, S. / Janik, H.	The effect of tyre rubber grinding method on the rubber-asphalt binder properties	144-154
De Silva, G. H. M. J. Subashi / Surangi, M. L. C.	Effect of waste rice husk ash on structural, thermal and run-off properties of clay roof tiles	251-257
Pan, Xiaoying / Shi, Caijun / Hu, Xiang / Ou, Zhihua	Effects of CO2 surface treatment on strength and permeability of one-day-aged cement mortar	1087-1095
Zhao, Xiaowen / Yan, Kezhen / He, Weili / Cai, Cong	Effects of Sasobit/Deurex on amorphous poly alpha olefin (APAO) modified asphalt binder	323-330
Munir, Muhammad Junaid / Kazmi, Syed Minhaj Saleem / Wu, Yu-Fei	Efficiency of waste marble powder in controlling alkali–silica reaction of concrete: A sustainable approach	590-599
Nematzadeh, Mahdi / Fallah-Valukolaee, Saber	Erosion resistance of high-strength concrete containing forta-ferro fibers against sulfuric acid attack with an optimum design	675-686
Yue, Kong / Chen, Zhangjing / Lu, Weidong / Liu, Weiqing / Li, Mengyu / Shao, Yaling / Tang, Lijuan / Wan, Li	Evaluating the mechanical and fire-resistance properties of modified fast-growing Chinese fir timber with boric-phenol-formaldehyde resin	956-962
Marecos, Vânia / Fontul, Simona / de Lurdes Antunes, Maria / Solla, Mercedes	Evaluation of a highway pavement using non-destructive tests: Falling Weight Deflectometer and Ground Penetrating Radar	1164-1172
Rashid, Khuram / Razzaq, Afia / Ahmad, Madiha / Rashid, Tabasam / Tariq, Samia	Experimental and analytical selection of sustainable recycled concrete with ceramic waste aggregate	829-840
Jadooe, Awad / Al-Mahaidi, Riadh / Abdouka, Kamiran	Experimental and numerical study of strengthening of heat-damaged RC beams using NSM CFRP strips	899-913
Yildirim, Irem Zeynep / Prezzi, Monica	Experimental evaluation of EAF ladle steel slag as a geo-fill material: Mineralogical, physical & mechanical properties	23-33
Chen, Qiu-song / Zhang, Qin-li / Fourie, Andy / Chen, Xin / Qi, Chong-chong	Experimental investigation on the strength characteristics of cement paste backfill in a similar stope model and its mechanism	34-43
Capozucca, R.	Experimental response of historic brick masonry under biaxial loading	539-556
Huang, Ting / Zhang, Y. X. / Lo, S. R. / Lee, C. K.	Experimental study on crack bridging in engineered cementitious composites under fatigue tensile loading	167-175
Kawabata, Yuichiro / Ohya, Yousuke / Kato, Ema / Iwanami, Mitsuyasu	Experimental study on effectiveness of retrofitting via normal strength concrete filling on damaged circular steel tubes subjected to axial and horizontal loads	1-9
Shim, Hak Bo / Seon Park, Hyo	Experimental tests on construction methods for a joint between concrete wall and steel girder involving long-time onsite welding	600-608
Ferreira, João Gomes / Cruz, Helena / Silva, Ricardo	Failure behaviour and repair of delaminated glulam beams	384-398
Chen, Bing / Oderji, Sajjad Yousefi / Chandan, Shakya / Fan, Shijian	Feasibility of Magnesium Phosphate Cement (MPC) as a repair material for ballastless track slab	270-274
Hanif, Asad / Parthasarathy, Pavithra / Lu, Zeyu / Sun, Ming / Li, Zongjin	Fiber-reinforced cementitious composites incorporating glass cenospheres – Mechanical properties and microstructure	529-538
Tahersima, Mohammad / Tikalsky, Paul	Finite element modeling of hydration heat in a concrete slab-on-grade floor with limestone blended cement	44-50
Vella, Jean Paul / Vollum, Robert L. / Jackson, Andrew	Flexural behaviour of headed bar connections between precast concrete panels	236-250
Xie, Wei / Castorena, Cassie / Wang, Chao / Kim, Y. Richard	A framework to characterize the healing potential of asphalt binder using the linear amplitude sweep test	771-779
Hegde, A.	Geocell reinforced foundation beds-past findings, present trends and future prospects: A state-of-the-art review	658-674
De Donno, Giorgio / Di Giambattista, Luca / Orlando, Luciana	High-resolution investigation of masonry samples through GPR and electrical resistivity tomography	1234-1249
Haba, Bourhaneddine / Agoudjil, Boudjemaa / Boudenne, Abderrahim / Benzarti, Karim	Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete	963-971
Choi, Jeong-Il / Lee, Yun / Kim, Yun Yong / Lee, Bang Yeon	Image-processing technique to detect carbonation regions of concrete sprayed with a phenolphthalein solution	451-461
Jamsawang, Pitthaya / Poorahong, Hatairat / Yoobanpot, Naphol / Songpiriyakij, Smith / Jongpradist, Pornkasem	Improvement of soft clay with cement and bagasse ash waste	61-71
Ahmed, Mesbah U. / Tarefder, Rafiqul A.	Incorporation of GPR and FWD into pavement Mechanistic-Empirical design	1272-1282
Plati, Christina / Georgouli, Konstantina / Cliatt, Brad / Loizos, Andreas	Incorporation of GPR data into genetic algorithms for assessing recycled pavements	1263-1271
Yang, Shu / Braham, Andrew F.	Influence of binder grade, gradation, temperature and loading rate on R-curve of asphalt concrete	780-790
Tioua, Tahar / Kriker, Abdelouahed / Barluenga, Gonzalo / Palomar, Irene	Influence of date palm fiber and shrinkage reducing admixture on self-compacting concrete performance at early age in hot-dry environment	721-733
Khan, Kaffayatullah / Amin, Muhammad Nasir	Influence of fineness of volcanic ash and its blends with quarry dust and slag on compressive strength of mortar under different curing temperatures	514-528
Chen, Xudong / Xu, Lingyu / Liu, Zhiheng / Huang, Yebo	Influence of high temperature on post-peak cyclic response of fly ash concrete under direct tension	399-410
de Paiva, Cassio E. L. / Arrieiro de Oliveira, Paulo Cesar / de Franco Peixoto, Creso	The influence of milling asphalt rates from wearing surface to the flexural strength applied to a recycled layer with Portland cement	1294-1300
Ghorbel, Elhem / Wardeh, George	Influence of recycled coarse aggregates incorporation on the fracture properties of concrete	51-60
Hidallana-Gamage, H. D. / Thambiratnam, D. P. / Perera, N. J.	Influence of the negative phase and support flexibility on the blast response of laminated glass panels	462-481
Ristić, Aleksandar / Bugarinović, Željko / Vrtunski, Milan / Govedarica, Miro / Petrovački, Dušan	Integration of modern remote sensing technologies for faster utility mapping and data extraction	1183-1198
Basterra, L. A. / Balmori, J. A. / Morillas, L. / Acuña, L. / Casado, M.	Internal reinforcement of laminated duo beams of low-grade timber with GFRP sheets	914-920
Lin, Peng / Huang, Weidong / Li, Yi / Tang, Naipeng / Xiao, Feipeng	Investigation of influence factors on low temperature properties of SBS modified asphalt	609-622
Sengoz, Burak / Bagayogo, Lansine / Oner, Julide / Topal, Ali	Investigation of rheological properties of transparent bitumen	1105-1111
Jiang, Jun / Lu, Zhongyuan / Niu, Yunhui / Li, Jun	Investigation of the properties of high-porosity cement foams containing epoxy resin	115-122
Buyuksagis, Ismail Sedat / Uygunoğlu, Tayfun / Tatar, Ertunc	Investigation on the usage of waste marble powder in cement-based adhesive mortar	734-742
Xie, Jianguang / Li, Hua / Gao, Lei / Liu, Mingxi	Laboratory investigation of rutting performance for multilayer pavement with fiber Bragg gratings	331-339
Fernandes, Francisco M. / Pais, Jorge C.	Laboratory observation of cracks in road pavements with GPR	1130-1138
Kwon, Seung-Jun / Lee, Han-Seung / Karthick, Subbiah / Saraswathy, Velu / Yang, Hyun-Min	Long-term corrosion performance of blended cement concrete in the marine environment – A real-time study	349-360
Li, Dawang / Wei, Ren / Du, Yingang / Guan, Xiaotao / Zhou, Muyao	Measurement methods of geometrical parameters and amount of corrosion of steel bar	921-927
Al-Tikrite, Ahmed / Hadi, Muhammad N. S.	Mechanical properties of reactive powder concrete containing industrial and waste steel fibres at different ratios under compression	1024-1034
Kumar, Puneet / Kodur, V. K. R.	Modeling the behavior of load bearing concrete walls under fire exposure	993-1003
Hassan, Noha M. / Fattah, Kazi P. / Tamimi, Adil K.	Modelling mechanical behavior of cementitious material incorporating CNTs using design of experiments	763-770
Ding, Xunhao / Ma, Tao / Gao, Wang	Morphological characterization and mechanical analysis for coarse aggregate skeleton of asphalt mixture based on discrete-element modeling	1048-1061
Liang, Siming / Wei, Ya / Wu, Zehong	Multiscale modeling elastic properties of cement-based materials considering imperfect interface effect	567-579
Riccardi, C. / Jiménez del Barco Carrión, Ana / Lo Presti, Davide / Cannone Falchetto, Augusto / Losa, Massimo / Wistuba, Michael	A new procedure to determine the rheological properties of RAP binder and corresponding bituminous blends	361-372
Guirguis, Bassili / Shehata, Medhat H.	A new screening test to evaluate the presence of oxidizable sulphide minerals in coarse aggregates	1096-1104
Martinez-Conesa, Eusebio J. / Egea, Jose A. / Miguel, Valentin / Toledo, Carlos / Meseguer-Valdenebro, Jose L.	Optimization of geometric parameters in a welded joint through response surface methodology	105-114
Garcia-Garcia, Francisco / Valls-Ayuso, Ana / Benlloch-Marco, Javier / Valcuende-Paya, Manuel	An optimization of the work disruption by 3D cavity mapping using GPR: A new sewerage project in Torrente (Valencia, Spain)	1226-1233
Bello, Latifou / Garcia-Diaz, Eric / Rougeau, Patrick	An original test method to assess water absorption/desorption of lightweight aggregates in presence of cement paste	752-762
Zhao, Shan / Al-Qadi, Imad	Pavement drainage pipe condition assessment by GPR image reconstruction using FDTD modeling	1283-1293
Sonat, C. / Dung, N. T. / Unluer, C.	Performance and microstructural development of MgO–SiO2 binders under different curing conditions	945-955
Zhong, Ke / Yang, Xu / Luo, Sang	Performance evaluation of petroleum bitumen binders and mixtures modified by natural rock asphalt from Xinjiang China	623-631
Valencia Saavedra, William Gustavo / Mejía de Gutiérrez, Ruby	Performance of geopolymer concrete composed of fly ash after exposure to elevated temperatures	229-235
Ouriques Rodrigues, Yury / Costa, Daniel Beserra / de Figueirêdo Lopes Lucena, Lêda Christiane / Costa Lopes, Matheus	Performance of warm mix asphalt containing Moringa oleifera Lam seeds oil: Rheological and mechanical properties	137-143
Chen, Shu Jian / Li, Wen Gui / Ruan, Cheng Ke / Sagoe-Crentsil, Kwesi / Duan, Wen Hui	Pore shape analysis using centrifuge driven metal intrusion: Indication on porosimetry equations, hydration and packing	95-104
Musaddiq Laskar, Sulaem / Talukdar, Sudip	Preparation and tests for workability, compressive and bond strength of ultra-fine slag based geopolymer as concrete repairing agent	176-190
Monteiro, A. O. / Loredo, A. / Costa, P. M. F. J. / Oeser, M. / Cachim, P. B.	A pressure-sensitive carbon black cement composite for traffic monitoring	1079-1086
Barluenga, G. / Giménez, M. / Rodríguez, A. / Río, O.	Quality Control Parameters for on-site evaluation of pumped Self-Compacting Concrete	1112-1120
García-González, Julia / Rodríguez-Robles, Desirée / Wang, Jianyun / De Belie, Nele / Morán-del Pozo, Julia Mª / Guerra-Romero, M. Ignacio / Juan-Valdés, Andrés	Quality improvement of mixed and ceramic recycled aggregates by biodeposition of calcium carbonate	1015-1023
Feng, Xuan / Ren, Qianci / Liu, Cai	Quantitative imaging for civil engineering by joint full waveform inversion of surface-based GPR and shallow seismic reflection data	1173-1182
Haddad, Rami H. / Almomani, Oubaida A.	Recovering flexural performance of thermally damaged concrete beams using NSM CFRP strips	632-643
Alam, M. S. / Hussein, A.	Relationship between the shear capacity and the flexural cracking load of FRP reinforced concrete beams	819-828
Bołtryk, Michał / Falkowski, Krzysztof / Pawluczuk, Edyta	A report on the fabrication of concrete pavement with the application of anionic bitumen emulsion	1004-1014
Long, Wu-Jian / Wei, Jing-Jie / Gu, Yu-Cun / Xing, Feng	Research on dynamic mechanical properties of alkali activated slag concrete under temperature-loads coupling effects	687-696
Arna'ot, Farid H. / Abbass, Ahmmad A. / Abualtemen, Ahmed Abbas / Abid, Sallal R. / Özakça, Mustafa	Residual strength of high strength concentric column-SFRC flat plate exposed to high temperatures	204-218
Mendoza Reales, Oscar Aurelio / Filho, Romildo Dias Toledo	A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites	697-710
Pinilla Melo, Javier / Flores Medina, N. / Sepulcre Aguilar, Alberto / Hernández Olivares, Francisco	Rheological and thermal properties of aerated sprayed mortar	275-283
Lam, My Ngoc-Tra / Jaritngam, Saravut / Le, Duc-Hien	Roller-compacted concrete pavement made of Electric Arc Furnace slag aggregate: Mix design and mechanical properties	482-495
Filonzi, Angelo / Delgadillo, Rodrigo	Sample size correction factors for indentation on asphalt bitumens	877-883
Fang, Mingjing / Wu, Shaopeng / Park, Daewook / Chen, Hao / Xie, Jun	Simple test study on anti-freeze additives selection for railway asphalt mixture (RAM) in cold region	284-293
McGinnis, Michael J. / Davis, Mark / de la Rosa, Andres / Weldon, Brad D. / Kurama, Yahya C.	Strength and stiffness of concrete with recycled concrete aggregates	258-269
Nadesan, Manu S. / Dinakar, P.	Structural concrete using sintered flyash lightweight aggregate: A review	928-944
Pedro, D. / de Brito, J. / Evangelista, L.	Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: Mechanical, durability and long-term properties	294-309
Ghoddousi, P. / Adelzade Saadabadi, L.	Study on hydration products by electrical resistivity for self-compacting concrete with silica fume and metakaolin	219-228
El Hafiane, Y. / Smith, A. / Abouliatim, Y. / Benhammou, A. / Abourriche, A. / Nibou, L. / Tanouti, B. / Bonnet, J. P.	Substitution of aluminous cement by calcium carbonates in presence of carboxylic acid	711-720
Narozny, M. / Zakowski, K. / Darowicki, K.	Time evolution of Electrochemical Impedance spectra of cathodically protected steel in artificial seawater	88-94
Liu, Hai / Deng, Zhihao / Han, Feng / Xia, Yuanyou / Liu, Qing Huo / Sato, Motoyuki	Time-frequency analysis of air-coupled GPR data for identification of delamination between pavement layers	1207-1215
Teguedi, Mohamed Cheikh / Toussaint, Evelyne / Blaysat, Benoît / Moreira, Sylvain / Liandrat, Sébastien / Grédiac, Michel	Towards the local expansion and contraction measurement of asphalt exposed to freeze-thaw cycles	438-450
Raoof, Saad M. / Bournas, Dionysios A.	TRM versus FRP in flexural strengthening of RC beams: Behaviour at high temperatures	424-437
Khoshnava, Seyed Meysam / Rostami, Raheleh / Ismail, Mohammad / Rahmat, Abdul Razak / Ogunbode, Babatunde Ezekiel	Woven hybrid Biocomposite: Mechanical properties of woven kenaf bast fibre/oil palm empty fruit bunches hybrid reinforced poly hydroxybutyrate biocomposite as non-structural building materials	155-166

About this
data sheet
IssueID
22640
Published on:
14/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.