Construction and Building Materials - novembre 2017

Publié:	novembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Pan, Jianrong / Chen, Shizhe / Lai, Zhichao / Wang, Zhan / Wang, Junqi / Xie, Huashen	Analysis and fracture behavior of welded box beam-to-column connections considering residual stresses	557-566
Mohammed, Alyaa / Al-Saadi, Nihad Tareq Khshain / Al-Mahaidi, Riadh	Assessment of bond strength of NSM CFRP strips embedded in concrete using cementitious adhesive made with graphene oxide	504-513
Fernandes, Francisco M. / Fernandes, Andreia / Pais, Jorge	Assessment of the density and moisture content of asphalt mixtures of road pavements	1216-1225
Huang, Liang / Chen, Liuxin / Yan, Libo / Kasal, Bohumil / Jiang, Yuxin / Liu, Changyi	Behavior of polyester FRP tube encased recycled aggregate concrete with recycled clay brick aggregate: Size and slenderness ratio effects	123-136
Wang, Weilun / Zhang, Mingyang / Tang, Yun / Zhang, Xiaogang / Ding, Xiaobo	Behaviour of high-strength concrete columns confined by spiral reinforcement under uniaxial compression	496-503
Al-Salloum, Yousef / Hadi, S. / Abbas, H. / Almusallam, Tarek / Moslem, M. A.	Bio-induction and bioremediation of cementitious composites using microbial mineral precipitation – A review	857-876
Tekle, Biruk Hailu / Khennane, Amar / Kayali, Obada	Bond behaviour of GFRP reinforcement in alkali activated cement concrete	972-982
Al-Abdwais, Ahmed H. / Al-Mahaidi, Riadh S.	Bond properties between carbon fibre reinforced polymer (CFRP) textile and concrete using modified cement-based adhesive	983-992
Bompa, D. V. / Elghazouli, A. Y.	Bond-slip response of deformed bars in rubberised concrete	884-898
El-Gamal, S. M. A. / El-Hosiny, F. I. / Amin, M. S. / Sayed, D. G.	Ceramic waste as an efficient material for enhancing the fire resistance and mechanical properties of hardened Portland cement pastes	1062-1078
Liang, Ming / Ren, Shisong / Fan, Weiyu / Wang, Hao / Cui, Wenyao / Zhao, Pinhui	Characterization of fume composition and rheological properties of asphalt with crumb rubber activated by microwave and TOR	310-322
Fang, Hao / Liu, Quantao / Mo, Liantong / Javilla, Barugahare / Shu, Benan / Wu, Shaopeng	Characterization of three-stage rutting development of asphalt mixtures	340-348
Afroz, Mahzabin / Patnaikuni, Indubhushan / Venkatesan, Srikanth	Chemical durability and performance of modified basalt fiber in concrete medium	191-203
Dousti, Ali / Beaudoin, James J. / Shekarchi, Mohammad	Chloride binding in hydrated MK, SF and natural zeolite-lime mixtures	1035-1047
Capozzoli, Luigi / Rizzo, Enzo	Combined NDT techniques in civil engineering applications: Laboratory and real test	1139-1150
Araujo, Steven / Beaucamp, Bruno / Delbreilh, Laurent / Dargent, Éric / Fauchard, Cyrille	Compactness/density assessment of newly-paved highway containing recycled asphalt pavement by means of non-nuclear method	1151-1163
Stryk, J. / Matula, R. / Pospíšil, K. / Derobert, X. / Simonin, J. M. / Alani, A. M.	Comparative measurements of ground penetrating radars used for road and bridge diagnostics in the Czech Republic and France	1199-1206
Chen, Zhen / Poon, Chi Sun	Comparative studies on the effects of sewage sludge ash and fly ash on cement hydration and properties of cement mortars	791-803
Xu, Ouming / Rangaraju, Prasad Rao / Wang, Shifeng / Xiao, Feipeng	Comparison of rheological properties and hot storage characteristics of asphalt binders modified with devulcanized ground tire rubber and other modifiers	841-848
Ren, Xiaodan / Liu, Kai / Li, Jie / Gao, Xiangling	Compressive behavior of stirrup-confined concrete under dynamic loading	10-22
Joshaghani, Alireza / Zollinger, Dan G.	Concrete pavements curing evaluation with non-destructive tests	1250-1262
Kulshreshtha, Y. / Schlangen, E. / Jonkers, H. M. / Vardon, P. J. / van Paassen, L. A.	CoRncrete: A corn starch based building material	411-423
Chen, Jun / Li, Zongjin / Jin, Xianyu	Critical features of microstructure development of early-age cement paste revealed by non-contact electrical resistivity measurement	1121-1129
Chen, Fei / Gao, Jianming / Qi, Bing / Shen, Daman	Deterioration mechanism of plain and blended cement mortars partially exposed to sulfate attack	849-856
Kim, Dahae / Kim, Y. Richard	Development of Stress Sweep Rutting (SSR) test for permanent deformation characterization of asphalt mixture	373-383
Pan, Ganghua / Zhan, Mimi / Fu, Minghua / Wang, Yaping / Lu, Xiaojun	Effect of CO2 curing on demolition recycled fine aggregates enhanced by calcium hydroxide pre-soaking	810-818
Hiremath, Parameshwar N. / Yaragal, Subhash C.	Effect of different curing regimes and durations on early strength development of reactive powder concrete	72-87
Over Kaman, Derya / Koroglu, Levent / Ayas, Erhan / Guney, Yucel	The effect of heat-treated boron derivative waste at 600 °C on the mechanical and microstructural properties of cement mortar	743-751
Wan, Hongxia / Song, Dongdong / Liu, Zhiyong / Du, Cuiwei / Zeng, Zhongping / Wang, Zhigao / Ding, De / Li, Xiaogang	Effect of negative half-wave alternating current on stress corrosion cracking behavior and mechanism of X80 pipeline steel in near-neutral solution	580-589
Mendis, Agampodi S. M. / Al-deen, Safat / Ashraf, Mahmud	Effect of rubber particles on the flexural behaviour of reinforced crumbed rubber concrete beams	644-657
Saccani, Andrea / Bignozzi, Maria Chiara / Barbieri, Luisa / Lancellotti, Isabella / Bursi, Elena	Effect of the chemical composition of different types of recycled glass used as aggregates on the ASR performance of cement mortars	804-809
Sienkiewicz, M. / Borzędowska-Labuda, K. / Zalewski, S. / Janik, H.	The effect of tyre rubber grinding method on the rubber-asphalt binder properties	144-154
De Silva, G. H. M. J. Subashi / Surangi, M. L. C.	Effect of waste rice husk ash on structural, thermal and run-off properties of clay roof tiles	251-257
Pan, Xiaoying / Shi, Caijun / Hu, Xiang / Ou, Zhihua	Effects of CO2 surface treatment on strength and permeability of one-day-aged cement mortar	1087-1095
Zhao, Xiaowen / Yan, Kezhen / He, Weili / Cai, Cong	Effects of Sasobit/Deurex on amorphous poly alpha olefin (APAO) modified asphalt binder	323-330
Munir, Muhammad Junaid / Kazmi, Syed Minhaj Saleem / Wu, Yu-Fei	Efficiency of waste marble powder in controlling alkali–silica reaction of concrete: A sustainable approach	590-599
Nematzadeh, Mahdi / Fallah-Valukolaee, Saber	Erosion resistance of high-strength concrete containing forta-ferro fibers against sulfuric acid attack with an optimum design	675-686
Yue, Kong / Chen, Zhangjing / Lu, Weidong / Liu, Weiqing / Li, Mengyu / Shao, Yaling / Tang, Lijuan / Wan, Li	Evaluating the mechanical and fire-resistance properties of modified fast-growing Chinese fir timber with boric-phenol-formaldehyde resin	956-962
Marecos, Vânia / Fontul, Simona / de Lurdes Antunes, Maria / Solla, Mercedes	Evaluation of a highway pavement using non-destructive tests: Falling Weight Deflectometer and Ground Penetrating Radar	1164-1172
Rashid, Khuram / Razzaq, Afia / Ahmad, Madiha / Rashid, Tabasam / Tariq, Samia	Experimental and analytical selection of sustainable recycled concrete with ceramic waste aggregate	829-840
Jadooe, Awad / Al-Mahaidi, Riadh / Abdouka, Kamiran	Experimental and numerical study of strengthening of heat-damaged RC beams using NSM CFRP strips	899-913
Yildirim, Irem Zeynep / Prezzi, Monica	Experimental evaluation of EAF ladle steel slag as a geo-fill material: Mineralogical, physical & mechanical properties	23-33
Chen, Qiu-song / Zhang, Qin-li / Fourie, Andy / Chen, Xin / Qi, Chong-chong	Experimental investigation on the strength characteristics of cement paste backfill in a similar stope model and its mechanism	34-43
Capozucca, R.	Experimental response of historic brick masonry under biaxial loading	539-556
Huang, Ting / Zhang, Y. X. / Lo, S. R. / Lee, C. K.	Experimental study on crack bridging in engineered cementitious composites under fatigue tensile loading	167-175
Kawabata, Yuichiro / Ohya, Yousuke / Kato, Ema / Iwanami, Mitsuyasu	Experimental study on effectiveness of retrofitting via normal strength concrete filling on damaged circular steel tubes subjected to axial and horizontal loads	1-9
Shim, Hak Bo / Seon Park, Hyo	Experimental tests on construction methods for a joint between concrete wall and steel girder involving long-time onsite welding	600-608
Ferreira, João Gomes / Cruz, Helena / Silva, Ricardo	Failure behaviour and repair of delaminated glulam beams	384-398
Chen, Bing / Oderji, Sajjad Yousefi / Chandan, Shakya / Fan, Shijian	Feasibility of Magnesium Phosphate Cement (MPC) as a repair material for ballastless track slab	270-274
Hanif, Asad / Parthasarathy, Pavithra / Lu, Zeyu / Sun, Ming / Li, Zongjin	Fiber-reinforced cementitious composites incorporating glass cenospheres – Mechanical properties and microstructure	529-538
Tahersima, Mohammad / Tikalsky, Paul	Finite element modeling of hydration heat in a concrete slab-on-grade floor with limestone blended cement	44-50
Vella, Jean Paul / Vollum, Robert L. / Jackson, Andrew	Flexural behaviour of headed bar connections between precast concrete panels	236-250
Xie, Wei / Castorena, Cassie / Wang, Chao / Kim, Y. Richard	A framework to characterize the healing potential of asphalt binder using the linear amplitude sweep test	771-779
Hegde, A.	Geocell reinforced foundation beds-past findings, present trends and future prospects: A state-of-the-art review	658-674
De Donno, Giorgio / Di Giambattista, Luca / Orlando, Luciana	High-resolution investigation of masonry samples through GPR and electrical resistivity tomography	1234-1249
Haba, Bourhaneddine / Agoudjil, Boudjemaa / Boudenne, Abderrahim / Benzarti, Karim	Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete	963-971
Choi, Jeong-Il / Lee, Yun / Kim, Yun Yong / Lee, Bang Yeon	Image-processing technique to detect carbonation regions of concrete sprayed with a phenolphthalein solution	451-461
Jamsawang, Pitthaya / Poorahong, Hatairat / Yoobanpot, Naphol / Songpiriyakij, Smith / Jongpradist, Pornkasem	Improvement of soft clay with cement and bagasse ash waste	61-71
Ahmed, Mesbah U. / Tarefder, Rafiqul A.	Incorporation of GPR and FWD into pavement Mechanistic-Empirical design	1272-1282
Plati, Christina / Georgouli, Konstantina / Cliatt, Brad / Loizos, Andreas	Incorporation of GPR data into genetic algorithms for assessing recycled pavements	1263-1271
Yang, Shu / Braham, Andrew F.	Influence of binder grade, gradation, temperature and loading rate on R-curve of asphalt concrete	780-790
Tioua, Tahar / Kriker, Abdelouahed / Barluenga, Gonzalo / Palomar, Irene	Influence of date palm fiber and shrinkage reducing admixture on self-compacting concrete performance at early age in hot-dry environment	721-733
Khan, Kaffayatullah / Amin, Muhammad Nasir	Influence of fineness of volcanic ash and its blends with quarry dust and slag on compressive strength of mortar under different curing temperatures	514-528
Chen, Xudong / Xu, Lingyu / Liu, Zhiheng / Huang, Yebo	Influence of high temperature on post-peak cyclic response of fly ash concrete under direct tension	399-410
de Paiva, Cassio E. L. / Arrieiro de Oliveira, Paulo Cesar / de Franco Peixoto, Creso	The influence of milling asphalt rates from wearing surface to the flexural strength applied to a recycled layer with Portland cement	1294-1300
Ghorbel, Elhem / Wardeh, George	Influence of recycled coarse aggregates incorporation on the fracture properties of concrete	51-60
Hidallana-Gamage, H. D. / Thambiratnam, D. P. / Perera, N. J.	Influence of the negative phase and support flexibility on the blast response of laminated glass panels	462-481
Ristić, Aleksandar / Bugarinović, Željko / Vrtunski, Milan / Govedarica, Miro / Petrovački, Dušan	Integration of modern remote sensing technologies for faster utility mapping and data extraction	1183-1198
Basterra, L. A. / Balmori, J. A. / Morillas, L. / Acuña, L. / Casado, M.	Internal reinforcement of laminated duo beams of low-grade timber with GFRP sheets	914-920
Lin, Peng / Huang, Weidong / Li, Yi / Tang, Naipeng / Xiao, Feipeng	Investigation of influence factors on low temperature properties of SBS modified asphalt	609-622
Sengoz, Burak / Bagayogo, Lansine / Oner, Julide / Topal, Ali	Investigation of rheological properties of transparent bitumen	1105-1111
Jiang, Jun / Lu, Zhongyuan / Niu, Yunhui / Li, Jun	Investigation of the properties of high-porosity cement foams containing epoxy resin	115-122
Buyuksagis, Ismail Sedat / Uygunoğlu, Tayfun / Tatar, Ertunc	Investigation on the usage of waste marble powder in cement-based adhesive mortar	734-742
Xie, Jianguang / Li, Hua / Gao, Lei / Liu, Mingxi	Laboratory investigation of rutting performance for multilayer pavement with fiber Bragg gratings	331-339
Fernandes, Francisco M. / Pais, Jorge C.	Laboratory observation of cracks in road pavements with GPR	1130-1138
Kwon, Seung-Jun / Lee, Han-Seung / Karthick, Subbiah / Saraswathy, Velu / Yang, Hyun-Min	Long-term corrosion performance of blended cement concrete in the marine environment – A real-time study	349-360
Li, Dawang / Wei, Ren / Du, Yingang / Guan, Xiaotao / Zhou, Muyao	Measurement methods of geometrical parameters and amount of corrosion of steel bar	921-927
Al-Tikrite, Ahmed / Hadi, Muhammad N. S.	Mechanical properties of reactive powder concrete containing industrial and waste steel fibres at different ratios under compression	1024-1034
Kumar, Puneet / Kodur, V. K. R.	Modeling the behavior of load bearing concrete walls under fire exposure	993-1003
Hassan, Noha M. / Fattah, Kazi P. / Tamimi, Adil K.	Modelling mechanical behavior of cementitious material incorporating CNTs using design of experiments	763-770
Ding, Xunhao / Ma, Tao / Gao, Wang	Morphological characterization and mechanical analysis for coarse aggregate skeleton of asphalt mixture based on discrete-element modeling	1048-1061
Liang, Siming / Wei, Ya / Wu, Zehong	Multiscale modeling elastic properties of cement-based materials considering imperfect interface effect	567-579
Riccardi, C. / Jiménez del Barco Carrión, Ana / Lo Presti, Davide / Cannone Falchetto, Augusto / Losa, Massimo / Wistuba, Michael	A new procedure to determine the rheological properties of RAP binder and corresponding bituminous blends	361-372
Guirguis, Bassili / Shehata, Medhat H.	A new screening test to evaluate the presence of oxidizable sulphide minerals in coarse aggregates	1096-1104
Martinez-Conesa, Eusebio J. / Egea, Jose A. / Miguel, Valentin / Toledo, Carlos / Meseguer-Valdenebro, Jose L.	Optimization of geometric parameters in a welded joint through response surface methodology	105-114
Garcia-Garcia, Francisco / Valls-Ayuso, Ana / Benlloch-Marco, Javier / Valcuende-Paya, Manuel	An optimization of the work disruption by 3D cavity mapping using GPR: A new sewerage project in Torrente (Valencia, Spain)	1226-1233
Bello, Latifou / Garcia-Diaz, Eric / Rougeau, Patrick	An original test method to assess water absorption/desorption of lightweight aggregates in presence of cement paste	752-762
Zhao, Shan / Al-Qadi, Imad	Pavement drainage pipe condition assessment by GPR image reconstruction using FDTD modeling	1283-1293
Sonat, C. / Dung, N. T. / Unluer, C.	Performance and microstructural development of MgO–SiO2 binders under different curing conditions	945-955
Zhong, Ke / Yang, Xu / Luo, Sang	Performance evaluation of petroleum bitumen binders and mixtures modified by natural rock asphalt from Xinjiang China	623-631
Valencia Saavedra, William Gustavo / Mejía de Gutiérrez, Ruby	Performance of geopolymer concrete composed of fly ash after exposure to elevated temperatures	229-235
Ouriques Rodrigues, Yury / Costa, Daniel Beserra / de Figueirêdo Lopes Lucena, Lêda Christiane / Costa Lopes, Matheus	Performance of warm mix asphalt containing Moringa oleifera Lam seeds oil: Rheological and mechanical properties	137-143
Chen, Shu Jian / Li, Wen Gui / Ruan, Cheng Ke / Sagoe-Crentsil, Kwesi / Duan, Wen Hui	Pore shape analysis using centrifuge driven metal intrusion: Indication on porosimetry equations, hydration and packing	95-104
Musaddiq Laskar, Sulaem / Talukdar, Sudip	Preparation and tests for workability, compressive and bond strength of ultra-fine slag based geopolymer as concrete repairing agent	176-190
Monteiro, A. O. / Loredo, A. / Costa, P. M. F. J. / Oeser, M. / Cachim, P. B.	A pressure-sensitive carbon black cement composite for traffic monitoring	1079-1086
Barluenga, G. / Giménez, M. / Rodríguez, A. / Río, O.	Quality Control Parameters for on-site evaluation of pumped Self-Compacting Concrete	1112-1120
García-González, Julia / Rodríguez-Robles, Desirée / Wang, Jianyun / De Belie, Nele / Morán-del Pozo, Julia Mª / Guerra-Romero, M. Ignacio / Juan-Valdés, Andrés	Quality improvement of mixed and ceramic recycled aggregates by biodeposition of calcium carbonate	1015-1023
Feng, Xuan / Ren, Qianci / Liu, Cai	Quantitative imaging for civil engineering by joint full waveform inversion of surface-based GPR and shallow seismic reflection data	1173-1182
Haddad, Rami H. / Almomani, Oubaida A.	Recovering flexural performance of thermally damaged concrete beams using NSM CFRP strips	632-643
Alam, M. S. / Hussein, A.	Relationship between the shear capacity and the flexural cracking load of FRP reinforced concrete beams	819-828
Bołtryk, Michał / Falkowski, Krzysztof / Pawluczuk, Edyta	A report on the fabrication of concrete pavement with the application of anionic bitumen emulsion	1004-1014
Long, Wu-Jian / Wei, Jing-Jie / Gu, Yu-Cun / Xing, Feng	Research on dynamic mechanical properties of alkali activated slag concrete under temperature-loads coupling effects	687-696
Arna'ot, Farid H. / Abbass, Ahmmad A. / Abualtemen, Ahmed Abbas / Abid, Sallal R. / Özakça, Mustafa	Residual strength of high strength concentric column-SFRC flat plate exposed to high temperatures	204-218
Mendoza Reales, Oscar Aurelio / Filho, Romildo Dias Toledo	A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites	697-710
Pinilla Melo, Javier / Flores Medina, N. / Sepulcre Aguilar, Alberto / Hernández Olivares, Francisco	Rheological and thermal properties of aerated sprayed mortar	275-283
Lam, My Ngoc-Tra / Jaritngam, Saravut / Le, Duc-Hien	Roller-compacted concrete pavement made of Electric Arc Furnace slag aggregate: Mix design and mechanical properties	482-495
Filonzi, Angelo / Delgadillo, Rodrigo	Sample size correction factors for indentation on asphalt bitumens	877-883
Fang, Mingjing / Wu, Shaopeng / Park, Daewook / Chen, Hao / Xie, Jun	Simple test study on anti-freeze additives selection for railway asphalt mixture (RAM) in cold region	284-293
McGinnis, Michael J. / Davis, Mark / de la Rosa, Andres / Weldon, Brad D. / Kurama, Yahya C.	Strength and stiffness of concrete with recycled concrete aggregates	258-269
Nadesan, Manu S. / Dinakar, P.	Structural concrete using sintered flyash lightweight aggregate: A review	928-944
Pedro, D. / de Brito, J. / Evangelista, L.	Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: Mechanical, durability and long-term properties	294-309
Ghoddousi, P. / Adelzade Saadabadi, L.	Study on hydration products by electrical resistivity for self-compacting concrete with silica fume and metakaolin	219-228
El Hafiane, Y. / Smith, A. / Abouliatim, Y. / Benhammou, A. / Abourriche, A. / Nibou, L. / Tanouti, B. / Bonnet, J. P.	Substitution of aluminous cement by calcium carbonates in presence of carboxylic acid	711-720
Narozny, M. / Zakowski, K. / Darowicki, K.	Time evolution of Electrochemical Impedance spectra of cathodically protected steel in artificial seawater	88-94
Liu, Hai / Deng, Zhihao / Han, Feng / Xia, Yuanyou / Liu, Qing Huo / Sato, Motoyuki	Time-frequency analysis of air-coupled GPR data for identification of delamination between pavement layers	1207-1215
Teguedi, Mohamed Cheikh / Toussaint, Evelyne / Blaysat, Benoît / Moreira, Sylvain / Liandrat, Sébastien / Grédiac, Michel	Towards the local expansion and contraction measurement of asphalt exposed to freeze-thaw cycles	438-450
Raoof, Saad M. / Bournas, Dionysios A.	TRM versus FRP in flexural strengthening of RC beams: Behaviour at high temperatures	424-437
Khoshnava, Seyed Meysam / Rostami, Raheleh / Ismail, Mohammad / Rahmat, Abdul Razak / Ogunbode, Babatunde Ezekiel	Woven hybrid Biocomposite: Mechanical properties of woven kenaf bast fibre/oil palm empty fruit bunches hybrid reinforced poly hydroxybutyrate biocomposite as non-structural building materials	155-166

Informations
sur cette fiche
IssueID
22640
Publié(e) le:
14.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.