Construction and Building Materials - September 2017

Published:	September 2017

Articles in this Issue

Author(s)	Title	Page(s)
Ding, Haibo / Rahman, Ali / Li, Qiushi / Qiu, Yanjun	Advanced mechanical characterization of asphalt mastics containing tourmaline modifier	520-528
Xin, Haohui / Mosallam, Ayman / Liu, Yuqing / Wang, Congzhe / Zhang, Youyou	Analytical and experimental evaluation of flexural behavior of FRP pultruded composite profiles for bridge deck structural design	123-149
Ahmed, H. I.	Behavior of magnetic concrete incorporated with Egyptian nano alumina	404-408
Nazari, Ali / Bagheri, Ali / Dao, Melissa / Mallawa, Chathumini / Zannis, Peita / Zumbo, Samuel / Sanjayan, Jay G.	The behaviour of iron in geopolymer under thermal shock	248-251
Shang, Huai-shuai / Cui, Feng-kun / Zhang, Peng / Zhao, Tie-jun / Ren, Guo-sheng	Bond behavior of steel bar embedded in recycled coarse aggregate concrete under lateral compression load	529-537
De Santis, Stefano	Bond behaviour of Steel Reinforced Grout for the extrados strengthening of masonry vaults	367-382
Li, Laibo / Chen, Mingxu / Zhou, Xiangming / Lu, Lingchao / Li, Yanlin / Gong, Chenchen / Cheng, Xin	A case of water absorption and water/fertilizer retention performance of super absorbent polymer modified sulphoaluminate cementitious materials	538-546
Agrawal, U. S. / Wanjari, S. P. / Naresh, D. N.	Characteristic study of geopolymer fly ash sand as a replacement to natural river sand	681-688
Wang, Min / Yao, Hao / Wang, Rumin / Zheng, Shuirong	Chemically functionalized graphene oxide as the additive for cement–matrix composite with enhanced fluidity and toughness	150-156
Lu, Zhongyu / Xian, Guijun	Combined effects of sustained tensile loading and elevated temperatures on the mechanical properties of pultruded BFRP plates	310-320
Kiefer, Thomas / Kariem, Hawraa / Lukačević, Markus / Füssl, Josef	The compressive strength of vertically perforated clay block masonry predicted by means of a unit-cell type numerical simulation tool taking discrete cracking into account	24-34
Guo, Hui / Guo, Weiguo / Amirkhizi, Alireza V.	Constitutive modeling of the tensile and compressive deformation behavior of polyurea over a wide range of strain rates	851-859
Liu, Simeng / Pearson, Matthew R. / Eaton, Mark / Pullin, Rhys	Correlation between acoustic emission distribution and stress variation through the depth of RC beam cross sections	634-645
Baran, Tomasz / Pichniarczyk, Paweł	Correlation factor between heat of hydration and compressive strength of common cement	321-332
Pozza, Luca / Saetta, Anna / Savoia, Marco / Talledo, Diego	Coupled axial-shear numerical model for CLT connections	568-582
Jiang, ShaoBo / Jiang, Linhua / Wang, Zhuyin / Jin, Ming / Bai, Shuya / Song, Shiqi / Yan, Xiancui	Deoxyribonucleic acid as an inhibitor for chloride-induced corrosion of reinforcing steel in simulated concrete pore solutions	238-247
Ley, M. Tyler / Welchel, David / Peery, Jacob / Khatibmasjedi, Seyedmorteza / LeFlore, Jake	Determining the air-void distribution in fresh concrete with the Sequential Air Method	723-737
Hao, Jutao / Cao, Pengyun / Liu, Zenghong / Wang, Zhengxing / Xia, Shifa	Developing of a SBS polymer modified bitumen to avoid low temperature cracks in the asphalt facing of a reservoir in a harsh climate region	105-113
Yoo, Doo-Yeol / Kim, Min Jae / Kim, Sung-Wook / Park, Jung-Jun	Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers	383-394
Ali, M. Shafqat / Mirza, M. Saeed / Lessard, Larry	Durability assessment of hybrid FRP composite shell and its application to prestressed concrete girders	114-122
Zhang, Xu / Ge, Shaojin / Wang, Hongning / Chen, Ruoyu	Effect of 5-phase seed crystal on the mechanical properties and microstructure of magnesium oxychloride cement	409-417
Wang, Xinpeng / Shui, Zhonghe / Yu, Rui / Bao, Ming / Wang, Guiming	Effect of coral filler on the hydration and properties of calcium sulfoaluminate cement based materials	459-466
Dietsch, Philipp	Effect of reinforcement on shrinkage stresses in timber members	903-915
Kochova, K. / Schollbach, K. / Gauvin, F. / Brouwers, H. J. H.	Effect of saccharides on the hydration of ordinary Portland cement	268-275
Yao, Wei-lin / Xiong, Guoxuan / Yang, Ying / Huang, Hai-qing / Zhou, Yu-fen	Effect of silica fume and colloidal graphite additions on the EMI shielding effectiveness of nickel fiber cement based composites	825-832
Liu, Songhui / Dou, Zhenzhen / Zhang, Saisai / Zhang, Haibo / Guan, Xuemao / Feng, Chunhua / Zhang, Jianwu	Effect of sodium hydroxide on the carbonation behavior of β-dicalcium silicate	591-594
Mahinroosta, Reza / Poorjafar, Arash	Effect of stress state and particle-size distribution on the stress reduction of sandy soils during saturation	1-13
Msinjili, Nsesheye Susan / Schmidt, Wolfram / Mota, Berta / Leinitz, Sarah / Kühne, Hans-Carsten / Rogge, Andreas	The effect of superplasticizers on rheology and early hydration kinetics of rice husk ash-blended cementitious systems	511-519
Joshaghani, Alireza	The effect of trass and fly ash in minimizing alkali-carbonate reaction in concrete	583-590
Li, Ming / Zhou, Song / Guo, Xiaoyang	Effects of alkali-treated bamboo fibers on the morphology and mechanical properties of oil well cement	619-625
de Sena Costa, Bruno Leonardo / de Oliveira Freitas, Júlio Cezar / Silva Santos, Paulo Henrique / de Araújo Melo, Dulce Maria / Henrique de Oliveira, Yvis	Effects of carbon dioxide in Portland cement: A relation between static sedimentation and carbonation	450-458
Liang, Ming / Xin, Xue / Fan, Weiyu / Wang, Hao / Ren, Shisong / Shi, Jingtao	Effects of polymerized sulfur on rheological properties, morphology and stability of SBS modified asphalt	860-871
Sikora, Pawel / Cendrowski, Krzysztof / Markowska-Szczupak, Agata / Horszczaruk, Elzbieta / Mijowska, Ewa	The effects of silica/titania nanocomposite on the mechanical and bactericidal properties of cement mortars	738-746
López-Zaldívar, O. / Lozano-Díez, R. / Herrero del Cura, S. / Mayor-Lobo, P. / Hernández-Olivares, F.	Effects of water absorption on the microstructure of plaster with end-of-life tire rubber mortars	558-567
Sun, Xiang-Hua / Zuo, Xiao-Bao / Yin, Guang-Ji / Jiang, Kai / Tang, Yu-Juan	Electrochemical and microscopic investigation on passive behavior of ductile iron in simulated cement-mortar pore solution	703-713
Ma, Xiao / Balonis, Magdalena / Pasco, Hélène / Toumazou, Michael / Counts, Derek / Kakoulli, Ioanna	Evaluation of hydroxyapatite effects for the consolidation of a Hellenistic-Roman rock-cut chamber tomb at Athienou-Malloura in Cyprus	333-344
Acikgoz, Sinan / Soga, Kenichi / Woodhams, Jim	Evaluation of the response of a vaulted masonry structure to differential settlements using point cloud data and limit analyses	916-931
Siregar, A. P. N. / Rafiq, M. Imran / Mulheron, M.	Experimental investigation of the effects of aggregate size distribution on the fracture behaviour of high strength concrete	252-259
Xiao, Y. / Wu, Y. / Li, J. / Yang, R. Z.	An experimental study on shear strength of glubam	490-500
El Hachem, Chady / Ye, Pan / Abahri, Kamilia / Bennacer, Rachid	Fiber's hygromorphic effect on thermal conductivity of wooden fibrous insulation characterized by X-ray tomography	758-765
Cao, Qi / Zhou, Jianpu / Gao, Rongxiong / Ma, Zhongguo John	Flexural behavior of expansive concrete beams reinforced with hybrid CFRP enclosure and steel rebars	501-510
Subhani, Mahbube / Globa, Anastasia / Al-Ameri, Riyadh / Moloney, Jules	Flexural strengthening of LVL beam using CFRP	480-489
Schneid, Eduardo / Dias de Moraes, Poliana	Grain angle and temperature effect on embedding strength	442-449
Zhang, Zengqi / Yan, Peiyu	Hydration kinetics of the epoxy resin-modified cement at different temperatures	287-294
Karatas, Mehmet / Benli, Ahmet / Ergin, Abdurrahman	Influence of ground pumice powder on the mechanical properties and durability of self-compacting mortars	467-479
Jakovljević, Suzana / Lisjak, Dragutin / Alar, Željko / Penava, Frano	The influence of humidity on mechanical properties of bamboo for bicycles	35-48
Samouh, Hamza / Roziere, Emmanuel / Loukili, Ahmed	Influence of specimen size and measurements duration on the long-term extrapolation of drying shrinkage	276-286
Mehta, Ankur / Siddique, Rafat / Singh, Bhanu Pratap / Aggoun, Salima / Łagód, Grzegorz / Barnat-Hunek, Danuta	Influence of various parameters on strength and absorption properties of fly ash based geopolymer concrete designed by Taguchi method	817-824
Ali, M. A. E. M. / Nehdi, M. L.	Innovative crack-healing hybrid fiber reinforced engineered cementitious composite	689-702
Liu, Guoming / Cheng, Weimin / Chen, Lianjun	Investigating and optimizing the mix proportion of pumping wet-mix shotcrete with polypropylene fiber	14-23
Hiasa, Shuhei / Birgul, Recep / Catbas, F. Necati	Investigation of effective utilization of infrared thermography (IRT) through advanced finite element modeling	295-309
Bai, Min	Investigation of low-temperature properties of recycling of aged SBS modified asphalt binder	766-773
Hu, Tao / Zi, Jianmin / Li, Jia / Mao, Lei / Jin, Sijia / Zhou, Wujun	Laboratory and field investigation of interlayer bonding between asphalt concrete layer and semi-rigid base constructed by using continuous construction method	418-425
Smesnik, Mathias / Tschernutter, Peter / Hofko, Bernhard	Laboratory method to simulate short-term aging of hot mix asphalt in hydraulic engineering	435-441
Biskri, Yasmina / Achoura, Djamel / Chelghoum, Nourredine / Mouret, Michel	Mechanical and durability characteristics of High Performance Concrete containing steel slag and crystalized slag as aggregates	167-178
Zhang, Wanlu / Chen, Yonghui / Zhao, Lunyang / Chen, Long	Mechanical behavior and constitutive relationship of mud with cement and fly ash	426-434
Azahar, Wan Nur Aifa Wan / Jaya, Ramadhansyah Putra / Hainin, Mohd Rosli / Bujang, Mastura / Ngadi, Norzita	Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking oil	653-663
Djayaprabha, Herry Suryadi / Chang, Ta-Peng / Shih, Jeng-Ywan / Chen, Chun-Tao	Mechanical properties and microstructural analysis of slag based cementitious binder with calcined dolomite as an activator	345-354
Guo, Tao / Wang, Hefang / Yang, Hongjian / Cai, Xiaosen / Ma, Qiu / Yang, Shaoming	The mechanical properties of magnesium oxysulfate cement enhanced with 517 phase magnesium oxysulfate whiskers	844-850
Khaliq, Wasim / Waheed, Farhan	Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures	747-757
Yu, Jiangmiao / Zhang, Xiaoning / Xiong, Chunlong	A methodology for evaluating micro-surfacing treatment on asphalt pavement based on grey system models and grey rational degree theory	214-226
Medina, Jose R. / Underwood, B. Shane	Micromechanical shear modulus modeling of activated crumb rubber modified asphalt cements	56-65
Xu, Fang / Deng, Xin / Peng, Chao / Zhu, Jing / Chen, Jianping	Mix design and flexural toughness of PVA fiber reinforced fly ash-geopolymer composites	179-189
Wang, Yong / Yuan, Qiang / Deng, Dehua / Liu, Zanqun	Modeling compressive strength of cement asphalt composite based on pore size distribution	714-722
Mohammed, Azad A.	Modelling the mechanical properties of concrete containing PET waste aggregate	595-605
Gradeci, Klodian / Labonnote, Nathalie / Time, Berit / Köhler, Jochen	Mould growth criteria and design avoidance approaches in wood-based materials – A systematic review	77-88
Noeiaghaei, Tahereh / Dhami, Navdeep / Mukherjee, Abhijit	Nanoparticles surface treatment on cemented materials for inhibition of bacterial growth	880-891
Zhang, Runxiao / Panesar, Daman K.	New approach to calculate water film thickness and the correlation to the rheology of mortar and concrete containing reactive MgO	892-902
Yuan, Jingkun / He, Peigang / Zhang, Peifeng / Jia, Dechang / Cai, Delong / Yang, Zhihua / Duan, Xiaoming / Wang, Shengjin / Zhou, Yu	Novel geopolymer based composites reinforced with stainless steel mesh and chromium powder	89-94
Navarro, R. / Zornoza, E. / Garcés, P. / Sánchez, I. / Alcocel, E. G.	Optimization of the alkali activation conditions of ground granulated SiMn slag	781-791
Mohsen, Mohamed O. / Taha, Ramzi / Abu Taqa, Ala / Shaat, Ahmed	Optimum carbon nanotubes' content for improving flexural and compressive strength of cement paste	395-403
Ying, Jingwei / Zhou, Bin / Xiao, Jianzhuang	Pore structure and chloride diffusivity of recycled aggregate concrete with nano-SiO2 and nano-TiO2	49-55
Lastra-González, Pedro / Calzada-Perez, Miguel A. / Castro-Fresno, Daniel / Vega-Zamanillo, Angel / Indacoechea-Vega, Irune	Porous asphalt mixture with alternative aggregates and crumb-rubber modified binder at reduced temperature	260-267
Wang, Ziyi / Wang, Zhi / Tang, Shengxuan / He, Yunfei	Preparation and properties of electrically conductive aggregate made using magnetically separated fly ash	547-557
Mehta, Ankur / Siddique, Rafat	Properties of low-calcium fly ash based geopolymer concrete incorporating OPC as partial replacement of fly ash	792-807
Wang, Yuhong / Chong, Dan / Wen, Yong	Quality verification of polymer-modified asphalt binder used in hot-mix asphalt pavement construction	157-166
Zhi, Qing / Guo, Zhengxing / Xiao, Quandong / Yuan, Fu / Song, Jingran	Quasi-static test and strut-and-tie modeling of precast concrete shear walls with grouted lap-spliced connections	190-203
Sas, Z. / Doherty, R. / Kovacs, T. / Soutsos, M. / Sha, W. / Schroeyers, W.	Radiological evaluation of by-products used in construction and alternative applications; Part I. Preparation of a natural radioactivity database	227-237
Rezagholilou, Alireza / Papadakis, Vagelis G. / Nikraz, Hamid	Rate of carbonation in cement modified base course material	646-652
Wang, Yong / Kong, Lingwei / Chen, Qing / Lau, Benjamin / Wang, Yanli	Research and application of a black rapid repair concrete for municipal pavement rehabilitation around manholes	204-213
Mellado, Ana / Pérez-Ramos, Martha Iris / Monzó, José / Borrachero, María Victoria / Payá, Jordi	Resistance to acid attack of alkali-activated binders: Simple new techniques to measure susceptibility	355-366
da Silva, Marco Antônio / Pepe, Marco / Mendes de Andrade, Rodolfo Giacomim / Schubert Pfeil, Michèle / Filho, Romildo Dias Toledo	Rheological and mechanical behavior of High Strength Steel Fiber-River Gravel Self Compacting Concrete	606-618
Sun, Yihan / Wu, Shaopeng / Liu, Quantao / Zeng, Wenbo / Chen, Zongwu / Ye, Qunshan / Pan, Pan	Self-healing performance of asphalt mixtures through heating fibers or aggregate	673-680
Hojati, Maryam / Radlińska, Aleksandra	Shrinkage and strength development of alkali-activated fly ash-slag binary cements	808-816
Zhang, Bingliu / Shen, Weiguo / Wang, Jing / Zhang, Wensheng / Zhu, Wenshang / Liu, Yun	Slight-expansive road base course binder: Properties, hydration and performance	626-633
Saha, Gourab / Biligiri, Krishna Prapoorna	Stato-dynamic response analyses through semi-circular bending test: Fatigue life prediction of asphalt mixtures	664-672
Vasić, M. V. / Pezo, L. / Zdravković, J. D. / Bačkalić, Z. / Radojević, Z.	The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve	872-879
Yang, Lu / Wang, Fazhou / Shu, Chang / Liu, Peng / Zhang, Wenqin / Hu, Shuguang	TiO2/porous cementitious composites: Influences of porosities and TiO2 loading levels on photocatalytic degradation of gaseous benzene	774-780
Rajan, Bharat / Singh, Dharamveer	Understanding influence of crushers on shape characteristics of fine aggregates based on digital image and conventional techniques	833-843
Xiong, Chuansheng / Li, Weihua / Jiang, Linhua / Wang, Wei / Guo, Qingxiang	Use of grounded iron ore tailings (GIOTs) and BaCO3 to improve sulfate resistance of pastes	66-76
Rahman, Md Tareq / Hainin, Mohd Rosli / Bakar, Wan Azelee Wan Abu	Use of waste cooking oil, tire rubber powder and palm oil fuel ash in partial replacement of bitumen	95-104

About this
data sheet
IssueID
22634
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.