Construction and Building Materials - septembre 2017

Publié:	septembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ding, Haibo / Rahman, Ali / Li, Qiushi / Qiu, Yanjun	Advanced mechanical characterization of asphalt mastics containing tourmaline modifier	520-528
Xin, Haohui / Mosallam, Ayman / Liu, Yuqing / Wang, Congzhe / Zhang, Youyou	Analytical and experimental evaluation of flexural behavior of FRP pultruded composite profiles for bridge deck structural design	123-149
Ahmed, H. I.	Behavior of magnetic concrete incorporated with Egyptian nano alumina	404-408
Nazari, Ali / Bagheri, Ali / Dao, Melissa / Mallawa, Chathumini / Zannis, Peita / Zumbo, Samuel / Sanjayan, Jay G.	The behaviour of iron in geopolymer under thermal shock	248-251
Shang, Huai-shuai / Cui, Feng-kun / Zhang, Peng / Zhao, Tie-jun / Ren, Guo-sheng	Bond behavior of steel bar embedded in recycled coarse aggregate concrete under lateral compression load	529-537
De Santis, Stefano	Bond behaviour of Steel Reinforced Grout for the extrados strengthening of masonry vaults	367-382
Li, Laibo / Chen, Mingxu / Zhou, Xiangming / Lu, Lingchao / Li, Yanlin / Gong, Chenchen / Cheng, Xin	A case of water absorption and water/fertilizer retention performance of super absorbent polymer modified sulphoaluminate cementitious materials	538-546
Agrawal, U. S. / Wanjari, S. P. / Naresh, D. N.	Characteristic study of geopolymer fly ash sand as a replacement to natural river sand	681-688
Wang, Min / Yao, Hao / Wang, Rumin / Zheng, Shuirong	Chemically functionalized graphene oxide as the additive for cement–matrix composite with enhanced fluidity and toughness	150-156
Lu, Zhongyu / Xian, Guijun	Combined effects of sustained tensile loading and elevated temperatures on the mechanical properties of pultruded BFRP plates	310-320
Kiefer, Thomas / Kariem, Hawraa / Lukačević, Markus / Füssl, Josef	The compressive strength of vertically perforated clay block masonry predicted by means of a unit-cell type numerical simulation tool taking discrete cracking into account	24-34
Guo, Hui / Guo, Weiguo / Amirkhizi, Alireza V.	Constitutive modeling of the tensile and compressive deformation behavior of polyurea over a wide range of strain rates	851-859
Liu, Simeng / Pearson, Matthew R. / Eaton, Mark / Pullin, Rhys	Correlation between acoustic emission distribution and stress variation through the depth of RC beam cross sections	634-645
Baran, Tomasz / Pichniarczyk, Paweł	Correlation factor between heat of hydration and compressive strength of common cement	321-332
Pozza, Luca / Saetta, Anna / Savoia, Marco / Talledo, Diego	Coupled axial-shear numerical model for CLT connections	568-582
Jiang, ShaoBo / Jiang, Linhua / Wang, Zhuyin / Jin, Ming / Bai, Shuya / Song, Shiqi / Yan, Xiancui	Deoxyribonucleic acid as an inhibitor for chloride-induced corrosion of reinforcing steel in simulated concrete pore solutions	238-247
Ley, M. Tyler / Welchel, David / Peery, Jacob / Khatibmasjedi, Seyedmorteza / LeFlore, Jake	Determining the air-void distribution in fresh concrete with the Sequential Air Method	723-737
Hao, Jutao / Cao, Pengyun / Liu, Zenghong / Wang, Zhengxing / Xia, Shifa	Developing of a SBS polymer modified bitumen to avoid low temperature cracks in the asphalt facing of a reservoir in a harsh climate region	105-113
Yoo, Doo-Yeol / Kim, Min Jae / Kim, Sung-Wook / Park, Jung-Jun	Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers	383-394
Ali, M. Shafqat / Mirza, M. Saeed / Lessard, Larry	Durability assessment of hybrid FRP composite shell and its application to prestressed concrete girders	114-122
Zhang, Xu / Ge, Shaojin / Wang, Hongning / Chen, Ruoyu	Effect of 5-phase seed crystal on the mechanical properties and microstructure of magnesium oxychloride cement	409-417
Wang, Xinpeng / Shui, Zhonghe / Yu, Rui / Bao, Ming / Wang, Guiming	Effect of coral filler on the hydration and properties of calcium sulfoaluminate cement based materials	459-466
Dietsch, Philipp	Effect of reinforcement on shrinkage stresses in timber members	903-915
Kochova, K. / Schollbach, K. / Gauvin, F. / Brouwers, H. J. H.	Effect of saccharides on the hydration of ordinary Portland cement	268-275
Yao, Wei-lin / Xiong, Guoxuan / Yang, Ying / Huang, Hai-qing / Zhou, Yu-fen	Effect of silica fume and colloidal graphite additions on the EMI shielding effectiveness of nickel fiber cement based composites	825-832
Liu, Songhui / Dou, Zhenzhen / Zhang, Saisai / Zhang, Haibo / Guan, Xuemao / Feng, Chunhua / Zhang, Jianwu	Effect of sodium hydroxide on the carbonation behavior of β-dicalcium silicate	591-594
Mahinroosta, Reza / Poorjafar, Arash	Effect of stress state and particle-size distribution on the stress reduction of sandy soils during saturation	1-13
Msinjili, Nsesheye Susan / Schmidt, Wolfram / Mota, Berta / Leinitz, Sarah / Kühne, Hans-Carsten / Rogge, Andreas	The effect of superplasticizers on rheology and early hydration kinetics of rice husk ash-blended cementitious systems	511-519
Joshaghani, Alireza	The effect of trass and fly ash in minimizing alkali-carbonate reaction in concrete	583-590
Li, Ming / Zhou, Song / Guo, Xiaoyang	Effects of alkali-treated bamboo fibers on the morphology and mechanical properties of oil well cement	619-625
de Sena Costa, Bruno Leonardo / de Oliveira Freitas, Júlio Cezar / Silva Santos, Paulo Henrique / de Araújo Melo, Dulce Maria / Henrique de Oliveira, Yvis	Effects of carbon dioxide in Portland cement: A relation between static sedimentation and carbonation	450-458
Liang, Ming / Xin, Xue / Fan, Weiyu / Wang, Hao / Ren, Shisong / Shi, Jingtao	Effects of polymerized sulfur on rheological properties, morphology and stability of SBS modified asphalt	860-871
Sikora, Pawel / Cendrowski, Krzysztof / Markowska-Szczupak, Agata / Horszczaruk, Elzbieta / Mijowska, Ewa	The effects of silica/titania nanocomposite on the mechanical and bactericidal properties of cement mortars	738-746
López-Zaldívar, O. / Lozano-Díez, R. / Herrero del Cura, S. / Mayor-Lobo, P. / Hernández-Olivares, F.	Effects of water absorption on the microstructure of plaster with end-of-life tire rubber mortars	558-567
Sun, Xiang-Hua / Zuo, Xiao-Bao / Yin, Guang-Ji / Jiang, Kai / Tang, Yu-Juan	Electrochemical and microscopic investigation on passive behavior of ductile iron in simulated cement-mortar pore solution	703-713
Ma, Xiao / Balonis, Magdalena / Pasco, Hélène / Toumazou, Michael / Counts, Derek / Kakoulli, Ioanna	Evaluation of hydroxyapatite effects for the consolidation of a Hellenistic-Roman rock-cut chamber tomb at Athienou-Malloura in Cyprus	333-344
Acikgoz, Sinan / Soga, Kenichi / Woodhams, Jim	Evaluation of the response of a vaulted masonry structure to differential settlements using point cloud data and limit analyses	916-931
Siregar, A. P. N. / Rafiq, M. Imran / Mulheron, M.	Experimental investigation of the effects of aggregate size distribution on the fracture behaviour of high strength concrete	252-259
Xiao, Y. / Wu, Y. / Li, J. / Yang, R. Z.	An experimental study on shear strength of glubam	490-500
El Hachem, Chady / Ye, Pan / Abahri, Kamilia / Bennacer, Rachid	Fiber's hygromorphic effect on thermal conductivity of wooden fibrous insulation characterized by X-ray tomography	758-765
Cao, Qi / Zhou, Jianpu / Gao, Rongxiong / Ma, Zhongguo John	Flexural behavior of expansive concrete beams reinforced with hybrid CFRP enclosure and steel rebars	501-510
Subhani, Mahbube / Globa, Anastasia / Al-Ameri, Riyadh / Moloney, Jules	Flexural strengthening of LVL beam using CFRP	480-489
Schneid, Eduardo / Dias de Moraes, Poliana	Grain angle and temperature effect on embedding strength	442-449
Zhang, Zengqi / Yan, Peiyu	Hydration kinetics of the epoxy resin-modified cement at different temperatures	287-294
Karatas, Mehmet / Benli, Ahmet / Ergin, Abdurrahman	Influence of ground pumice powder on the mechanical properties and durability of self-compacting mortars	467-479
Jakovljević, Suzana / Lisjak, Dragutin / Alar, Željko / Penava, Frano	The influence of humidity on mechanical properties of bamboo for bicycles	35-48
Samouh, Hamza / Roziere, Emmanuel / Loukili, Ahmed	Influence of specimen size and measurements duration on the long-term extrapolation of drying shrinkage	276-286
Mehta, Ankur / Siddique, Rafat / Singh, Bhanu Pratap / Aggoun, Salima / Łagód, Grzegorz / Barnat-Hunek, Danuta	Influence of various parameters on strength and absorption properties of fly ash based geopolymer concrete designed by Taguchi method	817-824
Ali, M. A. E. M. / Nehdi, M. L.	Innovative crack-healing hybrid fiber reinforced engineered cementitious composite	689-702
Liu, Guoming / Cheng, Weimin / Chen, Lianjun	Investigating and optimizing the mix proportion of pumping wet-mix shotcrete with polypropylene fiber	14-23
Hiasa, Shuhei / Birgul, Recep / Catbas, F. Necati	Investigation of effective utilization of infrared thermography (IRT) through advanced finite element modeling	295-309
Bai, Min	Investigation of low-temperature properties of recycling of aged SBS modified asphalt binder	766-773
Hu, Tao / Zi, Jianmin / Li, Jia / Mao, Lei / Jin, Sijia / Zhou, Wujun	Laboratory and field investigation of interlayer bonding between asphalt concrete layer and semi-rigid base constructed by using continuous construction method	418-425
Smesnik, Mathias / Tschernutter, Peter / Hofko, Bernhard	Laboratory method to simulate short-term aging of hot mix asphalt in hydraulic engineering	435-441
Biskri, Yasmina / Achoura, Djamel / Chelghoum, Nourredine / Mouret, Michel	Mechanical and durability characteristics of High Performance Concrete containing steel slag and crystalized slag as aggregates	167-178
Zhang, Wanlu / Chen, Yonghui / Zhao, Lunyang / Chen, Long	Mechanical behavior and constitutive relationship of mud with cement and fly ash	426-434
Azahar, Wan Nur Aifa Wan / Jaya, Ramadhansyah Putra / Hainin, Mohd Rosli / Bujang, Mastura / Ngadi, Norzita	Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking oil	653-663
Djayaprabha, Herry Suryadi / Chang, Ta-Peng / Shih, Jeng-Ywan / Chen, Chun-Tao	Mechanical properties and microstructural analysis of slag based cementitious binder with calcined dolomite as an activator	345-354
Guo, Tao / Wang, Hefang / Yang, Hongjian / Cai, Xiaosen / Ma, Qiu / Yang, Shaoming	The mechanical properties of magnesium oxysulfate cement enhanced with 517 phase magnesium oxysulfate whiskers	844-850
Khaliq, Wasim / Waheed, Farhan	Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures	747-757
Yu, Jiangmiao / Zhang, Xiaoning / Xiong, Chunlong	A methodology for evaluating micro-surfacing treatment on asphalt pavement based on grey system models and grey rational degree theory	214-226
Medina, Jose R. / Underwood, B. Shane	Micromechanical shear modulus modeling of activated crumb rubber modified asphalt cements	56-65
Xu, Fang / Deng, Xin / Peng, Chao / Zhu, Jing / Chen, Jianping	Mix design and flexural toughness of PVA fiber reinforced fly ash-geopolymer composites	179-189
Wang, Yong / Yuan, Qiang / Deng, Dehua / Liu, Zanqun	Modeling compressive strength of cement asphalt composite based on pore size distribution	714-722
Mohammed, Azad A.	Modelling the mechanical properties of concrete containing PET waste aggregate	595-605
Gradeci, Klodian / Labonnote, Nathalie / Time, Berit / Köhler, Jochen	Mould growth criteria and design avoidance approaches in wood-based materials – A systematic review	77-88
Noeiaghaei, Tahereh / Dhami, Navdeep / Mukherjee, Abhijit	Nanoparticles surface treatment on cemented materials for inhibition of bacterial growth	880-891
Zhang, Runxiao / Panesar, Daman K.	New approach to calculate water film thickness and the correlation to the rheology of mortar and concrete containing reactive MgO	892-902
Yuan, Jingkun / He, Peigang / Zhang, Peifeng / Jia, Dechang / Cai, Delong / Yang, Zhihua / Duan, Xiaoming / Wang, Shengjin / Zhou, Yu	Novel geopolymer based composites reinforced with stainless steel mesh and chromium powder	89-94
Navarro, R. / Zornoza, E. / Garcés, P. / Sánchez, I. / Alcocel, E. G.	Optimization of the alkali activation conditions of ground granulated SiMn slag	781-791
Mohsen, Mohamed O. / Taha, Ramzi / Abu Taqa, Ala / Shaat, Ahmed	Optimum carbon nanotubes' content for improving flexural and compressive strength of cement paste	395-403
Ying, Jingwei / Zhou, Bin / Xiao, Jianzhuang	Pore structure and chloride diffusivity of recycled aggregate concrete with nano-SiO2 and nano-TiO2	49-55
Lastra-González, Pedro / Calzada-Perez, Miguel A. / Castro-Fresno, Daniel / Vega-Zamanillo, Angel / Indacoechea-Vega, Irune	Porous asphalt mixture with alternative aggregates and crumb-rubber modified binder at reduced temperature	260-267
Wang, Ziyi / Wang, Zhi / Tang, Shengxuan / He, Yunfei	Preparation and properties of electrically conductive aggregate made using magnetically separated fly ash	547-557
Mehta, Ankur / Siddique, Rafat	Properties of low-calcium fly ash based geopolymer concrete incorporating OPC as partial replacement of fly ash	792-807
Wang, Yuhong / Chong, Dan / Wen, Yong	Quality verification of polymer-modified asphalt binder used in hot-mix asphalt pavement construction	157-166
Zhi, Qing / Guo, Zhengxing / Xiao, Quandong / Yuan, Fu / Song, Jingran	Quasi-static test and strut-and-tie modeling of precast concrete shear walls with grouted lap-spliced connections	190-203
Sas, Z. / Doherty, R. / Kovacs, T. / Soutsos, M. / Sha, W. / Schroeyers, W.	Radiological evaluation of by-products used in construction and alternative applications; Part I. Preparation of a natural radioactivity database	227-237
Rezagholilou, Alireza / Papadakis, Vagelis G. / Nikraz, Hamid	Rate of carbonation in cement modified base course material	646-652
Wang, Yong / Kong, Lingwei / Chen, Qing / Lau, Benjamin / Wang, Yanli	Research and application of a black rapid repair concrete for municipal pavement rehabilitation around manholes	204-213
Mellado, Ana / Pérez-Ramos, Martha Iris / Monzó, José / Borrachero, María Victoria / Payá, Jordi	Resistance to acid attack of alkali-activated binders: Simple new techniques to measure susceptibility	355-366
da Silva, Marco Antônio / Pepe, Marco / Mendes de Andrade, Rodolfo Giacomim / Schubert Pfeil, Michèle / Filho, Romildo Dias Toledo	Rheological and mechanical behavior of High Strength Steel Fiber-River Gravel Self Compacting Concrete	606-618
Sun, Yihan / Wu, Shaopeng / Liu, Quantao / Zeng, Wenbo / Chen, Zongwu / Ye, Qunshan / Pan, Pan	Self-healing performance of asphalt mixtures through heating fibers or aggregate	673-680
Hojati, Maryam / Radlińska, Aleksandra	Shrinkage and strength development of alkali-activated fly ash-slag binary cements	808-816
Zhang, Bingliu / Shen, Weiguo / Wang, Jing / Zhang, Wensheng / Zhu, Wenshang / Liu, Yun	Slight-expansive road base course binder: Properties, hydration and performance	626-633
Saha, Gourab / Biligiri, Krishna Prapoorna	Stato-dynamic response analyses through semi-circular bending test: Fatigue life prediction of asphalt mixtures	664-672
Vasić, M. V. / Pezo, L. / Zdravković, J. D. / Bačkalić, Z. / Radojević, Z.	The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve	872-879
Yang, Lu / Wang, Fazhou / Shu, Chang / Liu, Peng / Zhang, Wenqin / Hu, Shuguang	TiO2/porous cementitious composites: Influences of porosities and TiO2 loading levels on photocatalytic degradation of gaseous benzene	774-780
Rajan, Bharat / Singh, Dharamveer	Understanding influence of crushers on shape characteristics of fine aggregates based on digital image and conventional techniques	833-843
Xiong, Chuansheng / Li, Weihua / Jiang, Linhua / Wang, Wei / Guo, Qingxiang	Use of grounded iron ore tailings (GIOTs) and BaCO3 to improve sulfate resistance of pastes	66-76
Rahman, Md Tareq / Hainin, Mohd Rosli / Bakar, Wan Azelee Wan Abu	Use of waste cooking oil, tire rubber powder and palm oil fuel ash in partial replacement of bitumen	95-104

Informations
sur cette fiche
IssueID
22634
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.